Export limit exceeded: 414399 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 414399 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 414399 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 414399 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (414399 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-63942 1 Linux 1 Linux Kernel 2026-10-26 7.8 High
In the Linux kernel, the following vulnerability has been resolved: parport: Fix race between port and client registration The parport subsystem registers port devices before they are fully initialised, resulting in a race condition where client drivers such as lp can attach to ports that are not completely initialised or even being torn down. When the port and client drivers are built as modules and loaded around the same time during boot, this occasionally results in a crash. I was able to make this happen reliably in a VM with a PC-style parallel port by patching parport_pc to fail probing: > --- a/drivers/parport/parport_pc.c > +++ b/drivers/parport/parport_pc.c > @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base, > if (!p) > goto out3; > > - base_res = request_region(base, 3, p->name); > + base_res = NULL; > if (!base_res) > goto out4; > and then running: while true; do modprobe lp & modprobe parport_pc wait rmmod lp parport_pc done for a few seconds. In the long term I think port registration should be changed to put the call to device_add() inside parport_announce_port(), but since the latter currently cannot fail this will require changing all port drivers. For now, add a flag to indicate whether a port has been "announced" and only try to attach client drivers to ports when the flag is set.
CVE-2026-63944 1 Linux 1 Linux Kernel 2026-10-26 8.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was obtained from an RCU-protected iteration over hdev->conn_hash.list and is not valid once these locks are dropped. A concurrent disconnect can free the hci_conn between the unlock and the dereference, causing a use-after-free read. The cancellation mechanism in hci_conn_del() cannot prevent this because hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL: hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL); While hci_conn_del() dequeues with data=conn: hci_cmd_sync_dequeue(hdev, NULL, conn, NULL); Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never matches, and the pending work item is not cancelled. Fix this by saving conn->conn_timeout into a local variable while the locks are still held, so the stale conn pointer is never dereferenced after unlock. This is the same class of bug as the one fixed by commit 035c25007c9e ("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which addressed the identical pattern in a different function. This vulnerability was identified using 0sec.ai, an open-source automated security auditing platform (https://github.com/0sec-labs).
CVE-2026-59107 2026-10-26 9.8 Critical
A security vulnerability has been identified in the vSolution Matrix file sharing feature. A shared cryptographic trust configuration could allow an attacker who obtains the matching private key to authenticate to an affected device via SSH as root. This vulnerability affects only devices configured as a vSolution Matrix main/master station with the file sharing feature enabled.
CVE-2026-110499 1 Mtrudel 1 Bandit 2026-10-26 N/A
Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to grow per-connection memory and CPU cost without bound via a large SETTINGS_HEADER_TABLE_SIZE. Bandit resizes its HPACK encoder table to whatever size the client advertises, up to 2^32-1 bytes, and indexes response headers into it. Because responses carry distinct values such as date or content-length, nothing is evicted and the table grows with every response for the life of the connection, while each lookup scans it linearly. The SETTINGS handling in Bandit.HTTP2.Connection (lib/bandit/http2/connection.ex) passes remote_settings.header_table_size to HPAX.resize/2 with no server-side cap, and encode_headers encodes every response header as :store. Serving N responses on one connection therefore costs O(N²) CPU in the connection process. This issue affects bandit: from 0.3.6 before 1.14.0.
CVE-2026-109584 1 Mtrudel 1 Bandit 2026-10-26 N/A
Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory via a small HPACK-compressed HEADERS block. The block stores one large cookie value in the HPACK dynamic table and then references it tens of thousands of times with 1-byte indexed fields. In the reporter's run, a 49 KB block made a server with default settings allocate a 183 MB cookie binary before any application code ran, and every concurrent stream can repeat the cost. Bandit.HTTP2.Connection caps only the compressed block (max_header_block_size), and its check of the decoded list against max_header_list_size never fires because that setting defaults to :infinity. combine_cookie_crumbs/1 in lib/bandit/http2/stream.ex then joins every crumb into one binary. This issue affects bandit: from 0.3.3 before 1.14.0.
CVE-2026-63945 1 Linux 1 Linux Kernel 2026-10-26 7.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock iso_sock_close() calls iso_sock_clear_timer() before acquiring lock_sock(sk). iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the socket lock held: if (!iso_pi(sk)->conn) return; cancel_delayed_work(&iso_pi(sk)->conn->timeout_work); Concurrently, iso_conn_del() executes under lock_sock(sk) and calls iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in the final reference to the connection being dropped: CPU0 CPU1 ---- ---- iso_sock_clear_timer() if (conn != NULL) ... lock_sock(sk) iso_chan_del() iso_pi(sk)->conn = NULL cancel_delayed_work(conn) /* NULL deref or UAF */ iso_pi(sk)->conn is not stable across the unlock window, causing a NULL pointer dereference or use-after-free. Serialize iso_sock_clear_timer() with the socket lock by moving it inside lock_sock()/release_sock(), matching the pattern used in iso_conn_del() and all other call sites.
CVE-2026-111103 1 Mtrudel 1 Bandit 2026-10-26 N/A
Improper Cleanup on Thrown Exception vulnerability in the HTTP/2 handler of mtrudel bandit allows an unauthenticated remote attacker to bypass per-connection resource limits via a single TCP write that carries several frames, one of which raises a stream error. When a frame raises StreamError partway through a chunk, Bandit.HTTP2.Handler.handle_data/3 sends RST_STREAM and continues with the connection state from before the chunk, dropping the rest of it. Streams opened by earlier frames in the chunk keep running their Plug calls, but the stream counts, last_stream_id, the rapid-reset timestamps, the HPACK decoder state and the buffer roll back, so max_concurrent_streams, max_requests and the rapid-reset limiter never see those streams. A client that sends one HEADERS frame more than max_concurrent_streams in each write has the extra refused and the others forgotten: with a limit of 10, five such writes run 50 Plug calls at once. This issue affects bandit: from 1.9.0 before 1.14.0.
CVE-2026-111101 1 Mtrudel 1 Bandit 2026-10-26 N/A
Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/1.1 chunked body reader of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory and CPU via a request body made of many 1-byte chunks. The chunked reader in lib/bandit/http1/socket.ex keeps every chunk as its own list cell and binary term until IO.iodata_to_binary/1 joins them, and nothing limits the number of chunks. The :length option of read_body/2 counts only data bytes, so tiny chunks cost far more memory than their payload: 48 MB of 1-byte chunks grew one handler process to about 500 MB and took about 6 s of CPU. The route does not need to read the body, because on keep-alive connections ensure_completed/1 drains unread bodies through the same reader. This issue affects bandit: from 0.1.0 before 1.14.0.
CVE-2026-113436 1 Mtrudel 1 Bandit 2026-10-26 N/A
Inefficient Algorithmic Complexity vulnerability in the header integer parser of mtrudel bandit allows an unauthenticated remote attacker to consume server CPU via a content-length value or a Host or :authority port made of thousands of digits. Bandit.Headers.parse_integer/2 in lib/bandit/headers.ex builds the number one digit at a time with no limit on the digit count, allocating a new bignum at each step, so one value costs time quadratic in its length. It runs on raw request input over HTTP/1 and HTTP/2, before any range check. Over HTTP/2, a 4,000-digit value can be stored once in the HPACK dynamic table and re-sent on each new stream for about one byte: 124 KB of traffic kept the server busy for 27.9 s. This issue affects bandit: from 1.0.0-pre.7 before 1.14.0.
CVE-2026-110314 1 Mtrudel 1 Bandit 2026-10-26 N/A
Client-Side Enforcement of Server-Side Security vulnerability in the WebSocket connection handling of mtrudel bandit allows a remote client to keep running WebSock handler code after the server has stopped its connection, via data frames sent after ignoring the server's Close frame. When a WebSock callback returns {:stop, ...}, Bandit.WebSocket.Connection calls terminate/2, sends Close and shuts down the write side, but keeps the connection process running in a :closing state. handle_frame/3 and handle_info/3 never check that state, so later frames still reach handle_in/2 and later messages reach handle_info/2, with the state from the stop tuple, until the client sends Close, TCP drops or the idle timeout fires. A client refused in init/1 after a failed token check could still run an admin-only action. This issue affects bandit: from 0.5.1 before 1.14.0.
CVE-2026-114213 1 Mtrudel 1 Bandit 2026-10-26 N/A
Allocation of Resources Without Limits or Throttling vulnerability in the WebSocket fragment reassembly of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory via a fragmented message made of many 1-byte continuation frames. Bandit.WebSocket.Connection checks max_fragmented_message_size against the payload bytes received, but keeps every non-final continuation frame as a new list cell around its own binary, and nothing limits the number of fragments. A 1-byte fragment costs 7 bytes on the wire but about 150 to 170 bytes of server memory, so one connection can hold about 150 times the configured limit, roughly 1.2 to 1.4 GB at the default 8 MB. Ping frames between fragments keep the connection alive past the idle timeout. This issue affects bandit: from 1.11.0 before 1.14.0.
CVE-2026-114216 1 Mtrudel 1 Bandit 2026-10-26 N/A
Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') vulnerability in the HTTP/1.1 chunked body reader of mtrudel bandit allows an unauthenticated remote attacker to smuggle a second request past a front-end proxy via a chunk extension that contains a bare LF. The chunked reader in lib/bandit/http1/socket.ex takes the chunk-size line to be everything up to the first CRLF and discards everything after ; without checking it against the RFC 9112 chunk-ext grammar, so bare LF, bare CR and other control bytes pass. A proxy that ends the size line at a bare LF reads 2;\nxx\r\n40\r\n... as one request whose second chunk holds a GET /admin, while Bandit ends the body early and dispatches GET /admin as a separate pipelined request. Deployments without such a proxy in front of Bandit are not affected. This issue affects bandit: from 1.12.4 before 1.14.0.
CVE-2026-115269 1 Mtrudel 1 Bandit 2026-10-26 N/A
Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 request body reader of mtrudel bandit allows an unauthenticated remote attacker to hold stream processes open indefinitely via WINDOW_UPDATE or empty SETTINGS frames sent while a Plug reads the request body. Bandit.HTTP2.Stream.do_read_data/4 in lib/bandit/http2/stream.ex waits for each frame with a fresh read_timeout. A stream WINDOW_UPDATE, or the zero-delta window update that every empty SETTINGS frame delivers to all streams, ends the wait without delivering any body data, and the loop starts a new full countdown. A client that sends one of these 9-byte frames before each countdown expires keeps read_body blocked, together with the stream process and whatever the application holds while reading, for as long as it likes. This issue affects bandit: from 1.4.0 before 1.14.0.
CVE-2026-111981 1 Wordpress-extensions 1 Givewp 2026-10-26 2.7 Low
The GiveWP WordPress plugin before 4.19.0.1 does not perform a capability check when handling donor address changes, allowing users who have been granted donor-report (view) access but not donor-edit access to add, modify, or delete the stored address of any donor on the site.
CVE-2026-108525 1 Mtrudel 1 Bandit 2026-10-26 N/A
Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory via DATA frames sent past the advertised receive window. The attacker requests a response larger than the 65,535-byte initial window and withholds WINDOW_UPDATE, so the stream process blocks while sending and stops reading, then floods small DATA frames on that stream. Every frame is queued in the stream's mailbox until the BEAM node runs out of memory. Bandit.HTTP2.Connection.handle_frame/3 in lib/bandit/http2/connection.ex forwards each DATA frame to the stream process without consulting the receive window, and Bandit.HTTP2.FlowControl.compute_recv_window/2 replenishes the window as data arrives rather than as it is consumed, and never answers a violation with FLOW_CONTROL_ERROR. This issue affects bandit: from 0.3.1 before 1.14.0.
CVE-2026-83928 1 Microsoft 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more 2026-10-26 8.8 High
Out-of-bounds write in Windows Local Security Authority Subsystem Service (LSASS) allows an unauthorized attacker to execute code over a network.
CVE-2026-83929 1 Microsoft 27 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 24 more 2026-10-26 8.8 High
Out-of-bounds write in Windows GDI allows an unauthorized attacker to execute code over a network.
CVE-2026-83930 1 Microsoft 12 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 9 more 2026-10-26 7 High
Use after free in Windows Update Orchestrator Service allows an authorized attacker to elevate privileges locally.
CVE-2026-79678 1 Redhat 8 Enterprise Linux, Enterprise Linux Eus, Freeipa and 5 more 2026-10-26 8.1 High
A flaw was found in FreeIPA's idp-add command, where insufficiently validated --organization/--base-url input reaches a constrained eval() call before the corresponding LDAP access control check is enforced. This allows any authenticated IPA principal, regardless of privilege level, to enumerate and read the environment variables of the affected server process and to cause denial of service via memory exhaustion.
CVE-2026-76578 1 Redhat 8 Enterprise Linux, Enterprise Linux Eus, Freeipa and 5 more 2026-10-26 9.8 Critical
A flaw was found in FreeIPA. The self-managed OTP token ACI does not require authentication and does not restrict which attributes may be added alongside the token entry. An unauthenticated LDAP client can exploit this, combined with a related flaw in the underlying directory server's ACI evaluation (tracked separately), to create an arbitrary attacker-controlled Kerberos principal and have it added to the administrators group. This allows a remote, unauthenticated attacker to obtain genuine FreeIPA administrator-group membership and perform administrative operations against the directory and, on SID-enabled deployments, other IdM services.