Export limit exceeded: 413848 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413848 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413848 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413848 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99049 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: xilinx: fix runtime PM leak on request error path pm_runtime_get_sync() leaves the usage counter incremented even when it fails, and xgpio_request() returns the error without dropping it. gpiolib does not call ->free() when ->request() fails, so xgpio_free(), which holds the only matching pm_runtime_put(), never runs. The reference is leaked and the controller can no longer runtime-suspend, so its clock stays enabled. Switch to pm_runtime_resume_and_get(), which only increments the usage counter on success. | ||||
| CVE-2026-99048 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix napi_disable deadlock when attempting to disable XSK pools When disabling XSK pools, GVE calls the unlocked versions of napi_disable and napi_enable. However, the netdev lock has already been acquired before ndo_bpf is called because GVE supports queue management ops. Calling the unlocked versions of napi_disable/enable results in a deadlock when attempting to disable XSK pools, as the thread attempts to re-acquire a lock it already holds. Update the NAPI calls to use the locked versions. This issue was found in production. | ||||
| CVE-2026-99047 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak when rings are stopped GVE does not free XSK buffers when resetting ring state as a part of stopping queues. This causes all XSK buffers which are posted to the NIC to be leaked. Free XSK buffers attached to an allocated buf_state when stopping rings. This issue was hit in production. | ||||
| CVE-2026-99046 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak on error descriptor When the error bit is set in the RX completion descriptor, the buf_state and its attached buffer should be freed. In the case of AF_XDP ZC, the XSK buffer was not freed, leading to a leak. This issue was caught by LLM. | ||||
| CVE-2026-99045 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ibmveth: h_free logical LAN on open-fail after register ibmveth_open() registers the logical LAN, then allocates the RX buffer pools. A pool failure jumps to out_free_buffer_pools without h_free_logical_lan(), so PHYP still owns the buffer-list page when it is unmapped. request_irq() failure already issued the hypercall before taking the same label. Move that h_free to the shared post-register unwind so both paths deregister before the buffer list is unmapped. | ||||
| CVE-2026-99044 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix use-after-free in dynamic port cleanup ice_dealloc_dynamic_port() uses dyn_port->vsi->idx to erase the dynamic port from pf->dyn_ports. However, it frees the VSI before reading the index for the erase, resulting in a use-after-free. Follow the reverse of the allocation order in ice_alloc_dynamic_port() by erasing the xarray entry before freeing the VSI. | ||||
| CVE-2026-99043 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix metadata_dst refcount handling on representor teardown ice_eswitch_release_repr() uses metadata_dst_free() to release the representor's metadata_dst. metadata_dst_free() directly frees the underlying memory without checking the dst_entry refcount. When ice_eswitch_port_start_xmit() processes a packet, it takes a reference via dst_hold() and attaches the metadata_dst to the skb. If the representor is torn down while packets are still queued on the lower device (e.g. in a qdisc), the metadata_dst is freed while references are still held. Use dst_release() instead, which correctly decrements the refcount and only frees the object when all references are dropped. The dst subsystem already handles metadata_dst cleanup in dst_destroy() when DST_METADATA is set. Other drivers sharing this pattern (nfp, airoha, bnxt) already use dst_release() for their metadata_dst lifecycle. | ||||
| CVE-2026-99042 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6 io_connect_bpf_populate() fills connect.port and connect.v6_addr for AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28 bytes. The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which already holds sin6_port and sin6_addr. io_connect() passes addr_len to the socket layer unchanged. At addr_len 24 the filter sees family AF_INET6 with port and address zero, while the kernel connects to the real destination. A filter that denies an IPv6 port or address is bypassed. Denying connect.port == P rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24. Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when absent. The threshold mismatch was found by an AI coding assistant (Claude Code) comparing this hook against the net/ipv6 length checks on my instructions; it also drafted the reproducer and this patch. I verified the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same code. | ||||
| CVE-2026-99041 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ip6_gre: remove obsolete ERSPAN PMTU update A tc tunnel_key action can attach a METADATA_IP_TUNNEL dst to an skb, and mirred can redirect it to a native ip6erspan device. The legacy PMTU update in ip6erspan_tunnel_xmit() treats that metadata dst as a route. Since it has no output device, dst_dev(dst)->mtu dereferences NULL. On v7.2 with KASAN, an initial UID/GID 65534 process with CapEff 0 used self-created user and network namespaces to trigger: KASAN: null-ptr-deref RIP: ip6erspan_tunnel_xmit+0x10fc/0x2cc0 Kernel panic - not syncing: Fatal exception in interrupt The update is obsolete. Commit fe1a4ca0a2b7 ("ip6_gre: process toobig in a better way") changed IPv6 GRE Too Big handling to update the underlay route and removed the equivalent block from __gre6_xmit(). ip6_tnl_xmit() then propagates the underlay PMTU to the overlay route. Remove the stale ERSPAN copy and its now-unused dst variable. This eliminates the metadata-dst dereference and keeps ERSPAN aligned with IPv6 GRE PMTU handling. | ||||
| CVE-2026-99040 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: Fix add_key() race with keyring restriction __key_create_or_update() snapshots keyring->restrict_link before taking the destination keyring's semaphore. keyring_restrict() installs a restriction while holding that semaphore. This allows a writer to observe no restriction, wait for the keyring owner to install a reject-all restriction and return successfully, and then link a key using the stale NULL snapshot. The writer only needs write permission on the destination keyring. Move the restrict_link read after __key_link_lock() and __key_link_begin(). The read and the subsequent restriction check are then serialized with restriction installation by keyring->sem. The race was reproduced on v7.2.8 in 19 executions where restriction installation returned before the link completed. All 19 linked the key despite the reject-all restriction. With this change, 312 executions reached the same ordering and every add_key() call failed with -EPERM. The issue was found by manual concurrency analysis assisted by AI-based analysis and independently verified with a QEMU reproducer and kernel instrumentation. | ||||
| CVE-2026-99039 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memstick: core: wait for request completion before freeing card In memstick_alloc_card() and memstick_set_rw_addr(), wait_for_completion_timeout() is used to wait for device identification and address configuration requests to complete. The memstick subsystem does not provide an abort or cancellation callback in struct memstick_host for in-flight requests. If wait_for_completion_timeout() expires (for instance, when a USB transfer or command retry is delayed), memstick_alloc_card() returns an error and frees the memstick_dev structure via kfree(card). However, the host controller driver (such as rtsx_usb_ms) is still running the request asynchronously in worker context. When the transfer eventually finishes, the driver writes into host->req->data, which points to memory inside the already freed card structure. This leads to a KASAN slab-use-after-free write: BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990 Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239 Workqueue: events rtsx_usb_ms_handle_req Call Trace: ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450 rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline] rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560 kthread+0x373/0x450 kernel/kthread.c:436 Allocated by task 1662: memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline] memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Freed by task 1662: kfree+0x20c/0x650 mm/slub.c:6792 memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline] memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already implement their own hardware and bus timeouts, and callers in mspro_block and ms_block already rely on wait_for_completion() unconditionally. Replace wait_for_completion_timeout() with wait_for_completion() in memstick_set_rw_addr() and memstick_alloc_card() so that the card structure is never freed while an asynchronous request is in flight. | ||||
| CVE-2026-99038 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memstick: rtsx_usb_ms: complete requests after eject instead of dropping them memstick_check() can pass its host->removing check just before rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject is set, and drv_remove's cancel_work_sync() can also cancel a queued handle_req before it picks the request up. Nobody completes card->mrq_complete. Once memstick core waits for requests without a timeout ("memstick: core: wait for request completion before freeing card"), this hangs removal: memstick_check() never returns and memstick_remove_host() blocks in flush_workqueue(): INFO: task kworker/u10:3:65 blocked for more than 20 seconds. Workqueue: kmemstick memstick_check __wait_for_common memstick_check INFO: task kworker/1:1:33 blocked for more than 20 seconds. Workqueue: usb_hub_wq hub_event __flush_workqueue memstick_remove_host rtsx_usb_ms_drv_remove Never drop a request. rtsx_usb_ms_request() always schedules handle_req, and handle_req fails requests with -ENOMEDIUM once eject is set, without touching the device. drv_remove flushes handle_req instead of cancelling it, and cancels it only after memstick_remove_host(), when no new request can arrive, so it cannot run on a freed host. The host_mutex drain in drv_remove is removed: handle_req always leaves host->req NULL when it finishes, so the drain never had anything to do, and it would now race with handle_req. | ||||
| CVE-2026-99037 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-crypt: reject the lmk IV mode with AEAD ciphers A "capi:" table line that pairs an AEAD cipher with the lmk IV mode, for example "capi:gcm(aes)-lmk" with the integrity:28:aead option, causes an oops when it is loaded. lmk sets tfms_count to 64, but crypt_alloc_tfms_aead only allocates one transform, so crypt_setkey reads past the end of the tfms_aead array and calls crypto_aead_setkey on the values it finds there. lmk exists for compatibility with Loop-AES, which uses CBC, so refuse it with an AEAD cipher rather than allocate 64 AEAD transforms. The check cannot go in crypt_iv_lmk_ctr with the other lmk checks, because the IV constructor runs after crypt_set_key. Note that this is not a security bug because the memory corruption can only be triggered by root. | ||||
| CVE-2026-99036 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm: fix reading free memory in do_resume When do_resume calls dm_table_get_mode(new_map), the call is done without holding any locks (it only holds a reference to the md). It may be possible that another concurrent ioctl on the same device will swap table after dm_swap_table and before dm_table_get_mode. In this case, dm_table_get_mode(new_map) reads freed memory. This race condition was triggered by syzbot. This commit fixes the race by reading mode of the new table before dm_swap_table. Note that new_map is also passed to dm_ima_need_measure, but this function doesn't attempt to dereference it, so this call should be safe. Note that this is not a security bug because only root can trigger it and the commonly used tools such as lvm or cryptsetup do not call the ioctls concurrently, so that they can't trigger it acceidentally. | ||||
| CVE-2026-99035 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: mtk-sd: Cancel request timeout work on remove The driver queues req_timeout while a request is active. msdc_request_done() uses cancel_delayed_work(), which does not wait for a timeout callback that has already started. The timeout callback calls mmc_request_done(), which wakes the request waiter, and then continues to use host->dev_comp and check the SDIO IRQ. During unbind, msdc_drv_remove() can return and the managed mmc_host can be freed before the callback finishes. KASAN reported use-after-free accesses in msdc_request_done() and msdc_recheck_sdio_irq() in each of three unbind tests. The same tests completed without a kernel diagnostic after this change. Call cancel_delayed_work_sync() after mmc_remove_host() has stopped new requests and before the driver releases the host resources. | ||||
| CVE-2026-99034 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-sprd: disable runtime PM on remove sdhci_sprd_probe() enables runtime PM, while sdhci_sprd_remove() does not perform the corresponding runtime PM cleanup. The probe failure path disables runtime PM before disabling the clocks, but the normal remove path directly disables clocks that are also managed by the runtime PM callbacks. If the device is runtime suspended, those clocks may already be disabled. Resume the device before removal, disable runtime PM and drop the temporary runtime PM reference before disabling the clocks. This issue was found by manual code inspection. | ||||
| CVE-2026-99033 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: guard the ll header push in packet_rcv_spkt() packet_rcv_spkt() restores the link layer header with skb_push(skb, skb->data - skb_mac_header(skb)); That subtraction is only meaningful when the device actually has a link layer header. packet_rcv() and tpacket_rcv() both wrap it in dev_has_header(), which is also the predicate the block comment at the top of the file states the restore in terms of; packet_rcv_spkt() does not. commit d549699048b4 ("net/packet: fix packet receive on L3 devices without visible hard header") introduced the helper and changed the two call sites, and this one stayed behind. A device without a visible ll header can leave skb->mac_header at the 0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does: init_can_skb() sets pkt_type and ip_summed but does not reset the headers, and commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure") dropped the skb_reset_*_header() calls that used to be there. skb_mac_header() is then 0xFFFF, the length becomes a large negative number and skb_push() reports it through skb_under_panic() -- from softirq context, so it is a full system panic even with panic_on_oops=0: skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0 kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x50/0x60 Call Trace: <IRQ> skb_push+0x38/0x40 packet_rcv_spkt+0xe1/0x170 __netif_receive_skb_core.constprop.0+0x7e8/0xd30 ... Kernel panic - not syncing: Fatal exception in interrupt The socket type is reachable: packet_create() accepts SOCK_PACKET alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check, and neither the socket length nor a capability check keeps it away from a CAN interface. The missing skb_reset_*_header() calls in init_can_skb() are a regression in their own right and are being fixed separately, but a packet socket should not turn a link layer that did not initialise its mac header into a kernel panic. Guard the push the way the other two receive paths do. Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is the driver RX path: vcan does not reproduce it, because can_send() resets the headers on the way out. One SOCK_PACKET socket bound to can0 and one frame written into the line discipline panics an unpatched kernel with the trace above; the same image with this patch prints no panic and powers off normally. Both kernels are this tree, defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk. | ||||
| CVE-2026-99032 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: protect clcsock lifetime in smc_getname smc_getname() dereferences smc->clcsock without holding clcsock_release_lock. Link-group termination can release the CLC socket through smc_close_active_abort() while the SMC socket is still open, for example after shutdown(SHUT_WR). A getsockname() caller can load smc->clcsock, then the termination worker can clear the pointer and call sock_release() before the caller accesses clcsock->ops or invokes getname(). This causes a use-after-free; if the worker clears the pointer before the load, it causes a NULL dereference. The syscall's file reference keeps the SMC socket alive but does not prevent asynchronous release of its CLC socket. KASAN reported the following with test-only timing instrumentation: BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0 Read of size 8 at addr ffff888109abb4e0 by task poc/103 Call Trace: smc_getname+0x19e/0x1b0 do_getsockname+0xe5/0x170 __sys_getsockname+0x8c/0x100 Allocated by task 95: sock_alloc_inode+0x1e/0x280 sock_alloc+0x3d/0x240 __sock_create+0x7e/0x430 smc_create+0x121/0x240 Freed by task 0: kmem_cache_free+0xcc/0x340 rcu_core+0x50a/0x1850 Last potentially related work creation: evict+0x446/0x6c0 smc_clcsock_release+0xa8/0xd0 smc_close_active_abort+0x26a/0x3a0 __smc_lgr_terminate.part.0+0x137/0x2e0 Hold clcsock_release_lock across the pointer check and the getname() callback to serialize with smc_clcsock_release(). Return -EBADF if the CLC socket has already been released, preserving the existing peer state check and the callback's return value otherwise. | ||||
| CVE-2026-99031 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: avoid recursive multicast port cleanup br_multicast_sg_del_exclude_ports() removes automatically added STAR_EXCL port groups by calling br_multicast_del_pg(). For S,G entries, that deletion calls back into br_multicast_sg_del_exclude_ports(), so a large number of STAR_EXCL ports consumes one kernel stack frame per port and can hit the stack guard page. Keep the complete port-group deletion path for cleanup, but suppress the S,G exclude-port cleanup while that helper is already walking the same entry. Normal deletion callers retain the existing behavior. | ||||
| CVE-2026-99030 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits() When skb_copy_and_csum_bits() reaches unreadable frags it returns 0 after copying only the linear part, and the rest of the caller's buffer is left as it was. The callers copy into a buffer that is about to go out on the wire: an ICMP error quoting the offending packet, or a driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer is zeroed beforehand, so whatever was in memory there gets sent. Zero the part of the buffer we didn't fill. The checksum usually won't match the data any more, so the receiver will usually drop the packet, but either way it no longer carries anything it shouldn't. Only zero for a positive @len, a negative one from a broken caller must not turn into a huge memset(). | ||||