Export limit exceeded: 36357 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36357 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-23135 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Teardown riscv specific bits after kvm_exit During a module removal, kvm_exit invokes arch specific disable call which disables AIA. However, we invoke aia_exit before kvm_exit resulting in the following warning. KVM kernel module can't be inserted afterwards due to inconsistent state of IRQ. [25469.031389] percpu IRQ 31 still enabled on CPU0! [25469.031732] WARNING: CPU: 3 PID: 943 at kernel/irq/manage.c:2476 __free_percpu_irq+0xa2/0x150 [25469.031804] Modules linked in: kvm(-) [25469.031848] CPU: 3 UID: 0 PID: 943 Comm: rmmod Not tainted 6.14.0-rc5-06947-g91c763118f47-dirty #2 [25469.031905] Hardware name: riscv-virtio,qemu (DT) [25469.031928] epc : __free_percpu_irq+0xa2/0x150 [25469.031976] ra : __free_percpu_irq+0xa2/0x150 [25469.032197] epc : ffffffff8007db1e ra : ffffffff8007db1e sp : ff2000000088bd50 [25469.032241] gp : ffffffff8131cef8 tp : ff60000080b96400 t0 : ff2000000088baf8 [25469.032285] t1 : fffffffffffffffc t2 : 5249207570637265 s0 : ff2000000088bd90 [25469.032329] s1 : ff60000098b21080 a0 : 037d527a15eb4f00 a1 : 037d527a15eb4f00 [25469.032372] a2 : 0000000000000023 a3 : 0000000000000001 a4 : ffffffff8122dbf8 [25469.032410] a5 : 0000000000000fff a6 : 0000000000000000 a7 : ffffffff8122dc10 [25469.032448] s2 : ff60000080c22eb0 s3 : 0000000200000022 s4 : 000000000000001f [25469.032488] s5 : ff60000080c22e00 s6 : ffffffff80c351c0 s7 : 0000000000000000 [25469.032582] s8 : 0000000000000003 s9 : 000055556b7fb490 s10: 00007ffff0e12fa0 [25469.032621] s11: 00007ffff0e13e9a t3 : ffffffff81354ac7 t4 : ffffffff81354ac7 [25469.032664] t5 : ffffffff81354ac8 t6 : ffffffff81354ac7 [25469.032698] status: 0000000200000100 badaddr: ffffffff8007db1e cause: 0000000000000003 [25469.032738] [<ffffffff8007db1e>] __free_percpu_irq+0xa2/0x150 [25469.032797] [<ffffffff8007dbfc>] free_percpu_irq+0x30/0x5e [25469.032856] [<ffffffff013a57dc>] kvm_riscv_aia_exit+0x40/0x42 [kvm] [25469.033947] [<ffffffff013b4e82>] cleanup_module+0x10/0x32 [kvm] [25469.035300] [<ffffffff8009b150>] __riscv_sys_delete_module+0x18e/0x1fc [25469.035374] [<ffffffff8000c1ca>] syscall_handler+0x3a/0x46 [25469.035456] [<ffffffff809ec9a4>] do_trap_ecall_u+0x72/0x134 [25469.035536] [<ffffffff809f5e18>] handle_exception+0x148/0x156 Invoke aia_exit and other arch specific cleanup functions after kvm_exit so that disable gets a chance to be called first before exit. | ||||
| CVE-2025-23132 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: quota: fix to avoid warning in dquot_writeback_dquots() F2FS-fs (dm-59): checkpoint=enable has some unwritten data. ------------[ cut here ]------------ WARNING: CPU: 6 PID: 8013 at fs/quota/dquot.c:691 dquot_writeback_dquots+0x2fc/0x308 pc : dquot_writeback_dquots+0x2fc/0x308 lr : f2fs_quota_sync+0xcc/0x1c4 Call trace: dquot_writeback_dquots+0x2fc/0x308 f2fs_quota_sync+0xcc/0x1c4 f2fs_write_checkpoint+0x3d4/0x9b0 f2fs_issue_checkpoint+0x1bc/0x2c0 f2fs_sync_fs+0x54/0x150 f2fs_do_sync_file+0x2f8/0x814 __f2fs_ioctl+0x1960/0x3244 f2fs_ioctl+0x54/0xe0 __arm64_sys_ioctl+0xa8/0xe4 invoke_syscall+0x58/0x114 checkpoint and f2fs_remount may race as below, resulting triggering warning in dquot_writeback_dquots(). atomic write remount - do_remount - down_write(&sb->s_umount); - f2fs_remount - ioctl - f2fs_do_sync_file - f2fs_sync_fs - f2fs_write_checkpoint - block_operations - locked = down_read_trylock(&sbi->sb->s_umount) : fail to lock due to the write lock was held by remount - up_write(&sb->s_umount); - f2fs_quota_sync - dquot_writeback_dquots - WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount)) : trigger warning because s_umount lock was unlocked by remount If checkpoint comes from mount/umount/remount/freeze/quotactl, caller of checkpoint has already held s_umount lock, calling dquot_writeback_dquots() in the context should be safe. So let's record task to sbi->umount_lock_holder, so that checkpoint can know whether the lock has held in the context or not by checking current w/ it. In addition, in order to not misrepresent caller of checkpoint, we should not allow to trigger async checkpoint for those callers: mount/umount/remount/ freeze/quotactl. | ||||
| CVE-2025-22113 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid journaling sb update on error if journal is destroying Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg: (umount) ext4_kill_sb kill_block_super generic_shutdown_super sync_filesystem /* commits all txns */ evict_inodes /* might start a new txn */ ext4_put_super flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */ jbd2_journal_destroy journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; jbd2_journal_commit_transaction jbd2_journal_get_descriptor_buffer jbd2_journal_bmap ext4_journal_bmap ext4_map_blocks ... ext4_inode_error ext4_handle_error schedule_work(&sbi->s_sb_upd_work) /* work queue kicks in */ update_super_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT) Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit. Further, in the journal destroy path, we have the following sequence: 1. Set mount flag indicating journal is destroying 2. force a commit and wait for it 3. flush pending sb updates This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606) Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here. | ||||
| CVE-2025-21961 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: fix truesize for mb-xdp-pass case When mb-xdp is set and return is XDP_PASS, packet is converted from xdp_buff to sk_buff with xdp_update_skb_shared_info() in bnxt_xdp_build_skb(). bnxt_xdp_build_skb() passes incorrect truesize argument to xdp_update_skb_shared_info(). The truesize is calculated as BNXT_RX_PAGE_SIZE * sinfo->nr_frags but the skb_shared_info was wiped by napi_build_skb() before. So it stores sinfo->nr_frags before bnxt_xdp_build_skb() and use it instead of getting skb_shared_info from xdp_get_shared_info_from_buff(). Splat looks like: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at net/core/skbuff.c:6072 skb_try_coalesce+0x504/0x590 Modules linked in: xt_nat xt_tcpudp veth af_packet xt_conntrack nft_chain_nat xt_MASQUERADE nf_conntrack_netlink xfrm_user xt_addrtype nft_coms CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.14.0-rc2+ #3 RIP: 0010:skb_try_coalesce+0x504/0x590 Code: 4b fd ff ff 49 8b 34 24 40 80 e6 40 0f 84 3d fd ff ff 49 8b 74 24 48 40 f6 c6 01 0f 84 2e fd ff ff 48 8d 4e ff e9 25 fd ff ff <0f> 0b e99 RSP: 0018:ffffb62c4120caa8 EFLAGS: 00010287 RAX: 0000000000000003 RBX: ffffb62c4120cb14 RCX: 0000000000000ec0 RDX: 0000000000001000 RSI: ffffa06e5d7dc000 RDI: 0000000000000003 RBP: ffffa06e5d7ddec0 R08: ffffa06e6120a800 R09: ffffa06e7a119900 R10: 0000000000002310 R11: ffffa06e5d7dcec0 R12: ffffe4360575f740 R13: ffffe43600000000 R14: 0000000000000002 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffffa0755f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f147b76b0f8 CR3: 00000001615d4000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? __warn+0x84/0x130 ? skb_try_coalesce+0x504/0x590 ? report_bug+0x18a/0x1a0 ? handle_bug+0x53/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? skb_try_coalesce+0x504/0x590 inet_frag_reasm_finish+0x11f/0x2e0 ip_defrag+0x37a/0x900 ip_local_deliver+0x51/0x120 ip_sublist_rcv_finish+0x64/0x70 ip_sublist_rcv+0x179/0x210 ip_list_rcv+0xf9/0x130 How to reproduce: <Node A> ip link set $interface1 xdp obj xdp_pass.o ip link set $interface1 mtu 9000 up ip a a 10.0.0.1/24 dev $interface1 <Node B> ip link set $interfac2 mtu 9000 up ip a a 10.0.0.2/24 dev $interface2 ping 10.0.0.1 -s 65000 Following ping.py patch adds xdp-mb-pass case. so ping.py is going to be able to reproduce this issue. | ||||
| CVE-2025-21888 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix a WARN during dereg_mr for DM type Memory regions (MR) of type DM (device memory) do not have an associated umem. In the __mlx5_ib_dereg_mr() -> mlx5_free_priv_descs() flow, the code incorrectly takes the wrong branch, attempting to call dma_unmap_single() on a DMA address that is not mapped. This results in a WARN [1], as shown below. The issue is resolved by properly accounting for the DM type and ensuring the correct branch is selected in mlx5_free_priv_descs(). [1] WARNING: CPU: 12 PID: 1346 at drivers/iommu/dma-iommu.c:1230 iommu_dma_unmap_page+0x79/0x90 Modules linked in: ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry ovelay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 12 UID: 0 PID: 1346 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1631 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 49 3b 29 72 26 49 3b 69 08 73 20 4d 89 f0 44 89 e9 4c 89 e2 48 89 ee 48 89 df 5b 5d 41 5c 41 5d 41 5e 41 5f e9 07 b8 88 ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 66 0f 1f 44 00 RSP: 0018:ffffc90001913a10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810194b0a8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88810194b0a8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f537abdd740(0000) GS:ffff88885fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f537aeb8000 CR3: 000000010c248001 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x84/0x190 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0xf8/0x1c0 ? handle_bug+0x55/0x90 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 dma_unmap_page_attrs+0xe6/0x290 mlx5_free_priv_descs+0xb0/0xe0 [mlx5_ib] __mlx5_ib_dereg_mr+0x37e/0x520 [mlx5_ib] ? _raw_spin_unlock_irq+0x24/0x40 ? wait_for_completion+0xfe/0x130 ? rdma_restrack_put+0x63/0xe0 [ib_core] ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0x116/0x170 [ib_uverbs] ? lock_release+0xc6/0x280 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f537adaf17b Code: 0f 1e fa 48 8b 05 1d ad 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed ac 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffff218f0b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffff218f1d8 RCX: 00007f537adaf17b RDX: 00007ffff218f1c0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffff218f1a0 R08: 00007f537aa8d010 R09: 0000561ee2e4f270 R10: 00007f537aace3a8 R11: 0000000000000246 R12: 00007ffff218f190 R13: 000000000000001c R14: 0000561ee2e4d7c0 R15: 00007ffff218f450 </TASK> | ||||
| CVE-2025-21801 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ravb: Fix missing rtnl lock in suspend/resume path Fix the suspend/resume path by ensuring the rtnl lock is held where required. Calls to ravb_open, ravb_close and wol operations must be performed under the rtnl lock to prevent conflicts with ongoing ndo operations. Without this fix, the following warning is triggered: [ 39.032969] ============================= [ 39.032983] WARNING: suspicious RCU usage [ 39.033019] ----------------------------- [ 39.033033] drivers/net/phy/phy_device.c:2004 suspicious rcu_dereference_protected() usage! ... [ 39.033597] stack backtrace: [ 39.033613] CPU: 0 UID: 0 PID: 174 Comm: python3 Not tainted 6.13.0-rc7-next-20250116-arm64-renesas-00002-g35245dfdc62c #7 [ 39.033623] Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) [ 39.033628] Call trace: [ 39.033633] show_stack+0x14/0x1c (C) [ 39.033652] dump_stack_lvl+0xb4/0xc4 [ 39.033664] dump_stack+0x14/0x1c [ 39.033671] lockdep_rcu_suspicious+0x16c/0x22c [ 39.033682] phy_detach+0x160/0x190 [ 39.033694] phy_disconnect+0x40/0x54 [ 39.033703] ravb_close+0x6c/0x1cc [ 39.033714] ravb_suspend+0x48/0x120 [ 39.033721] dpm_run_callback+0x4c/0x14c [ 39.033731] device_suspend+0x11c/0x4dc [ 39.033740] dpm_suspend+0xdc/0x214 [ 39.033748] dpm_suspend_start+0x48/0x60 [ 39.033758] suspend_devices_and_enter+0x124/0x574 [ 39.033769] pm_suspend+0x1ac/0x274 [ 39.033778] state_store+0x88/0x124 [ 39.033788] kobj_attr_store+0x14/0x24 [ 39.033798] sysfs_kf_write+0x48/0x6c [ 39.033808] kernfs_fop_write_iter+0x118/0x1a8 [ 39.033817] vfs_write+0x27c/0x378 [ 39.033825] ksys_write+0x64/0xf4 [ 39.033833] __arm64_sys_write+0x18/0x20 [ 39.033841] invoke_syscall+0x44/0x104 [ 39.033852] el0_svc_common.constprop.0+0xb4/0xd4 [ 39.033862] do_el0_svc+0x18/0x20 [ 39.033870] el0_svc+0x3c/0xf0 [ 39.033880] el0t_64_sync_handler+0xc0/0xc4 [ 39.033888] el0t_64_sync+0x154/0x158 [ 39.041274] ravb 11c30000.ethernet eth0: Link is Down | ||||
| CVE-2025-21696 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: clear uffd-wp PTE/PMD state on mremap() When mremap()ing a memory region previously registered with userfaultfd as write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in flag clearing leads to a mismatch between the vma flags (which have uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to trigger a warning in page_table_check_pte_flags() due to setting the pte to writable while uffd-wp is still set. Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any such mremap() so that the values are consistent with the existing clearing of VM_UFFD_WP. Be careful to clear the logical flag regardless of its physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE, huge PMD and hugetlb paths. | ||||
| CVE-2024-58074 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Grab intel_display from the encoder to avoid potential oopsies Grab the intel_display from 'encoder' rather than 'state' in the encoder hooks to avoid the massive footgun that is intel_sanitize_encoder(), which passes NULL as the 'state' argument to encoder .disable() and .post_disable(). TODO: figure out how to actually fix intel_sanitize_encoder()... | ||||
| CVE-2024-58006 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.6 Critical |
| In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar() In commit 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") set_bar() was modified to support dynamically changing the backing physical address of a BAR that was already configured. This means that set_bar() can be called twice, without ever calling clear_bar() (as calling clear_bar() would clear the BAR's PCI address assigned by the host). This can only be done if the new BAR size/flags does not differ from the existing BAR configuration. Add these missing checks. If we allow set_bar() to set e.g. a new BAR size that differs from the existing BAR size, the new address translation range will be smaller than the BAR size already determined by the host, which would mean that a read past the new BAR size would pass the iATU untranslated, which could allow the host to read memory not belonging to the new struct pci_epf_bar. While at it, add comments which clarifies the support for dynamically changing the physical address of a BAR. (Which was also missing.) | ||||
| CVE-2024-57999 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW Power Hypervisor can possibily allocate MMIO window intersecting with Dynamic DMA Window (DDW) range, which is over 32-bit addressing. These MMIO pages needs to be marked as reserved so that IOMMU doesn't map DMA buffers in this range. The current code is not marking these pages correctly which is resulting in LPAR to OOPS while booting. The stack is at below BUG: Unable to handle kernel data access on read at 0xc00800005cd40000 Faulting instruction address: 0xc00000000005cdac Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: af_packet rfkill ibmveth(X) lpfc(+) nvmet_fc nvmet nvme_keyring crct10dif_vpmsum nvme_fc nvme_fabrics nvme_core be2net(+) nvme_auth rtc_generic nfsd auth_rpcgss nfs_acl lockd grace sunrpc fuse configfs ip_tables x_tables xfs libcrc32c dm_service_time ibmvfc(X) scsi_transport_fc vmx_crypto gf128mul crc32c_vpmsum dm_mirror dm_region_hash dm_log dm_multipath dm_mod sd_mod scsi_dh_emc scsi_dh_rdac scsi_dh_alua t10_pi crc64_rocksoft_generic crc64_rocksoft sg crc64 scsi_mod Supported: Yes, External CPU: 8 PID: 241 Comm: kworker/8:1 Kdump: loaded Not tainted 6.4.0-150600.23.14-default #1 SLE15-SP6 b44ee71c81261b9e4bab5e0cde1f2ed891d5359b Hardware name: IBM,9080-M9S POWER9 (raw) 0x4e2103 0xf000005 of:IBM,FW950.B0 (VH950_149) hv:phyp pSeries Workqueue: events work_for_cpu_fn NIP: c00000000005cdac LR: c00000000005e830 CTR: 0000000000000000 REGS: c00001400c9ff770 TRAP: 0300 Not tainted (6.4.0-150600.23.14-default) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24228448 XER: 00000001 CFAR: c00000000005cdd4 DAR: c00800005cd40000 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000005e830 c00001400c9ffa10 c000000001987d00 c00001400c4fe800 GPR04: 0000080000000000 0000000000000001 0000000004000000 0000000000800000 GPR08: 0000000004000000 0000000000000001 c00800005cd40000 ffffffffffffffff GPR12: 0000000084228882 c00000000a4c4f00 0000000000000010 0000080000000000 GPR16: c00001400c4fe800 0000000004000000 0800000000000000 c00000006088b800 GPR20: c00001401a7be980 c00001400eff3800 c000000002a2da68 000000000000002b GPR24: c0000000026793a8 c000000002679368 000000000000002a c0000000026793c8 GPR28: 000008007effffff 0000080000000000 0000000000800000 c00001400c4fe800 NIP [c00000000005cdac] iommu_table_reserve_pages+0xac/0x100 LR [c00000000005e830] iommu_init_table+0x80/0x1e0 Call Trace: [c00001400c9ffa10] [c00000000005e810] iommu_init_table+0x60/0x1e0 (unreliable) [c00001400c9ffa90] [c00000000010356c] iommu_bypass_supported_pSeriesLP+0x9cc/0xe40 [c00001400c9ffc30] [c00000000005c300] dma_iommu_dma_supported+0xf0/0x230 [c00001400c9ffcb0] [c00000000024b0c4] dma_supported+0x44/0x90 [c00001400c9ffcd0] [c00000000024b14c] dma_set_mask+0x3c/0x80 [c00001400c9ffd00] [c0080000555b715c] be_probe+0xc4/0xb90 [be2net] [c00001400c9ffdc0] [c000000000986f3c] local_pci_probe+0x6c/0x110 [c00001400c9ffe40] [c000000000188f28] work_for_cpu_fn+0x38/0x60 [c00001400c9ffe70] [c00000000018e454] process_one_work+0x314/0x620 [c00001400c9fff10] [c00000000018f280] worker_thread+0x2b0/0x620 [c00001400c9fff90] [c00000000019bb18] kthread+0x148/0x150 [c00001400c9fffe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 There are 2 issues in the code 1. The index is "int" while the address is "unsigned long". This results in negative value when setting the bitmap. 2. The DMA offset is page shifted but the MMIO range is used as-is (64-bit address). MMIO address needs to be page shifted as well. | ||||
| CVE-2024-57809 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: imx6: Fix suspend/resume support on i.MX6QDL The suspend/resume functionality is currently broken on the i.MX6QDL platform, as documented in the NXP errata (ERR005723): https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf This patch addresses the issue by sharing most of the suspend/resume sequences used by other i.MX devices, while avoiding modifications to critical registers that disrupt the PCIe functionality. It targets the same problem as the following downstream commit: https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995 Unlike the downstream commit, this patch also resets the connected PCIe device if possible. Without this reset, certain drivers, such as ath10k or iwlwifi, will crash on resume. The device reset is also done by the driver on other i.MX platforms, making this patch consistent with existing practices. Upon resuming, the kernel will hang and display an error. Here's an example of the error encountered with the ath10k driver: ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible Unhandled fault: imprecise external abort (0x1406) at 0x0106f944 Without this patch, suspend/resume will fail on i.MX6QDL devices if a PCIe device is connected. [kwilczynski: commit log, added tag for stable releases] | ||||
| CVE-2024-57804 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs The driver, through the SAS transport, exposes a sysfs interface to enable/disable PHYs in a controller/expander setup. When multiple PHYs are disabled and enabled in rapid succession, the persistent and current config pages related to SAS IO unit/SAS Expander pages could get corrupted. Use separate memory for each config request. | ||||
| CVE-2024-53219 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtiofs: use pages instead of pointer for kernel direct IO When trying to insert a 10MB kernel module kept in a virtio-fs with cache disabled, the following warning was reported: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ...... Modules linked in: CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:__alloc_pages+0x2bf/0x380 ...... Call Trace: <TASK> ? __warn+0x8e/0x150 ? __alloc_pages+0x2bf/0x380 __kmalloc_large_node+0x86/0x160 __kmalloc+0x33c/0x480 virtio_fs_enqueue_req+0x240/0x6d0 virtio_fs_wake_pending_and_unlock+0x7f/0x190 queue_request_and_unlock+0x55/0x60 fuse_simple_request+0x152/0x2b0 fuse_direct_io+0x5d2/0x8c0 fuse_file_read_iter+0x121/0x160 __kernel_read+0x151/0x2d0 kernel_read+0x45/0x50 kernel_read_file+0x1a9/0x2a0 init_module_from_file+0x6a/0xe0 idempotent_init_module+0x175/0x230 __x64_sys_finit_module+0x5d/0xb0 x64_sys_call+0x1c3/0x9e0 do_syscall_64+0x3d/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ...... </TASK> ---[ end trace 0000000000000000 ]--- The warning is triggered as follows: 1) syscall finit_module() handles the module insertion and it invokes kernel_read_file() to read the content of the module first. 2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and passes it to kernel_read(). kernel_read() constructs a kvec iter by using iov_iter_kvec() and passes it to fuse_file_read_iter(). 3) virtio-fs disables the cache, so fuse_file_read_iter() invokes fuse_direct_io(). As for now, the maximal read size for kvec iter is only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so fuse_direct_io() doesn't split the 10MB buffer. It saves the address and the size of the 10MB-sized buffer in out_args[0] of a fuse request and passes the fuse request to virtio_fs_wake_pending_and_unlock(). 4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to queue the request. Because virtiofs need DMA-able address, so virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for all fuse args, copies these args into the bounce buffer and passed the physical address of the bounce buffer to virtiofsd. The total length of these fuse args for the passed fuse request is about 10MB, so copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and it triggers the warning in __alloc_pages(): if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)) return NULL; 5) virtio_fs_enqueue_req() will retry the memory allocation in a kworker, but it won't help, because kmalloc() will always return NULL due to the abnormal size and finit_module() will hang forever. A feasible solution is to limit the value of max_read for virtio-fs, so the length passed to kmalloc() will be limited. However it will affect the maximal read size for normal read. And for virtio-fs write initiated from kernel, it has the similar problem but now there is no way to limit fc->max_write in kernel. So instead of limiting both the values of max_read and max_write in kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use pages instead of pointer to pass the KVEC_IO data. After switching to pages for KVEC_IO data, these pages will be used for DMA through virtio-fs. If these pages are backed by vmalloc(), {flush|invalidate}_kernel_vmap_range() are necessary to flush or invalidate the cache before the DMA operation. So add two new fields in fuse_args_pages to record the base address of vmalloc area and the condition indicating whether invalidation is needed. Perform the flush in fuse_get_user_pages() for write operations and the invalidation in fuse_release_user_pages() for read operations. It may seem necessary to introduce another fie ---truncated--- | ||||
| CVE-2024-53114 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Clear virtualized VMLOAD/VMSAVE on Zen4 client A number of Zen4 client SoCs advertise the ability to use virtualized VMLOAD/VMSAVE, but using these instructions is reported to be a cause of a random host reboot. These instructions aren't intended to be advertised on Zen4 client so clear the capability. | ||||
| CVE-2024-53051 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/hdcp: Add encoder check in intel_hdcp_get_capability Sometimes during hotplug scenario or suspend/resume scenario encoder is not always initialized when intel_hdcp_get_capability add a check to avoid kernel null pointer dereference. | ||||
| CVE-2024-50289 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: av7110: fix a spectre vulnerability As warned by smatch: drivers/staging/media/av7110/av7110_ca.c:270 dvb_ca_ioctl() warn: potential spectre issue 'av7110->ci_slot' [w] (local cap) There is a spectre-related vulnerability at the code. Fix it. | ||||
| CVE-2024-49940 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: prevent possible tunnel refcount underflow When a session is created, it sets a backpointer to its tunnel. When the session refcount drops to 0, l2tp_session_free drops the tunnel refcount if session->tunnel is non-NULL. However, session->tunnel is set in l2tp_session_create, before the tunnel refcount is incremented by l2tp_session_register, which leaves a small window where session->tunnel is non-NULL when the tunnel refcount hasn't been bumped. Moving the assignment to l2tp_session_register is trivial but l2tp_session_create calls l2tp_session_set_header_len which uses session->tunnel to get the tunnel's encap. Add an encap arg to l2tp_session_set_header_len to avoid using session->tunnel. If l2tpv3 sessions have colliding IDs, it is possible for l2tp_v3_session_get to race with l2tp_session_register and fetch a session which doesn't yet have session->tunnel set. Add a check for this case. | ||||
| CVE-2024-49885 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm, slub: avoid zeroing kmalloc redzone Since commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested"), setting orig_size treats the wasted space (object_size - orig_size) as a redzone. However with init_on_free=1 we clear the full object->size, including the redzone. Additionally we clear the object metadata, including the stored orig_size, making it zero, which makes check_object() treat the whole object as a redzone. These issues lead to the following BUG report with "slub_debug=FUZ init_on_free=1": [ 0.000000] ============================================================================= [ 0.000000] BUG kmalloc-8 (Not tainted): kmalloc Redzone overwritten [ 0.000000] ----------------------------------------------------------------------------- [ 0.000000] [ 0.000000] 0xffff000010032858-0xffff00001003285f @offset=2136. First byte 0x0 instead of 0xcc [ 0.000000] FIX kmalloc-8: Restoring kmalloc Redzone 0xffff000010032858-0xffff00001003285f=0xcc [ 0.000000] Slab 0xfffffdffc0400c80 objects=36 used=23 fp=0xffff000010032a18 flags=0x3fffe0000000200(workingset|node=0|zone=0|lastcpupid=0x1ffff) [ 0.000000] Object 0xffff000010032858 @offset=2136 fp=0xffff0000100328c8 [ 0.000000] [ 0.000000] Redzone ffff000010032850: cc cc cc cc cc cc cc cc ........ [ 0.000000] Object ffff000010032858: cc cc cc cc cc cc cc cc ........ [ 0.000000] Redzone ffff000010032860: cc cc cc cc cc cc cc cc ........ [ 0.000000] Padding ffff0000100328b4: 00 00 00 00 00 00 00 00 00 00 00 00 ............ [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.11.0-rc3-next-20240814-00004-g61844c55c3f4 #144 [ 0.000000] Hardware name: NXP i.MX95 19X19 board (DT) [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x90/0xe8 [ 0.000000] show_stack+0x18/0x24 [ 0.000000] dump_stack_lvl+0x74/0x8c [ 0.000000] dump_stack+0x18/0x24 [ 0.000000] print_trailer+0x150/0x218 [ 0.000000] check_object+0xe4/0x454 [ 0.000000] free_to_partial_list+0x2f8/0x5ec To address the issue, use orig_size to clear the used area. And restore the value of orig_size after clear the remaining area. When CONFIG_SLUB_DEBUG not defined, (get_orig_size()' directly returns s->object_size. So when using memset to init the area, the size can simply be orig_size, as orig_size returns object_size when CONFIG_SLUB_DEBUG not enabled. And orig_size can never be bigger than object_size. | ||||
| CVE-2024-46834 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: fail closed if we can't get max channel used in indirection tables Commit 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with active RSS contexts") proves that allowing indirection table to contain channels with out of bounds IDs may lead to crashes. Currently the max channel check in the core gets skipped if driver can't fetch the indirection table or when we can't allocate memory. Both of those conditions should be extremely rare but if they do happen we should try to be safe and fail the channel change. | ||||
| CVE-2024-46681 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pktgen: use cpus_read_lock() in pg_net_init() I have seen the WARN_ON(smp_processor_id() != cpu) firing in pktgen_thread_worker() during tests. We must use cpus_read_lock()/cpus_read_unlock() around the for_each_online_cpu(cpu) loop. While we are at it use WARN_ON_ONCE() to avoid a possible syslog flood. | ||||