Export limit exceeded: 16078 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16078 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-60094 | 1 Vinchin | 2 Backup & Recovery, Vinchin Backup And Recovery | 2026-08-14 | 6.5 Medium |
| Vinchin Backup & Recovery through 9.0.0.86562 contains a heap buffer overflow vulnerability that allows unauthenticated remote attackers to cause process crash or memory corruption by sending a malformed TCP packet with an unchecked body_len field to the agentlink_server service. Attackers can craft a malicious packet that passes an attacker-controlled length directly to recv(), triggering a heap overflow of up to approximately 4 GiB and resulting in process crash or potential memory corruption. | ||||
| CVE-2026-5857 | 1 Contiki-ng | 1 Contiki-ng | 2026-08-14 | 8.1 High |
| Contiki-NG's MQTT client parse_publish_vhdr() in os/net/app-layer/mqtt/mqtt.c sets topic_len_received=1 before checking topic_len against the 64-byte limit, so an over-length topic returns early but leaves the flag set. On the next TCP segment, tcp_input() re-invokes the parser with topic_received==0, and the persisted topic_len_received==1 skips the length-reading block containing the guard, falling through directly to a memcpy() that uses the unvalidated 16-bit topic_len as the copy length. The 65-byte topic[] destination overruns into adjacent struct fields including the payload_chunk pointer, which subsequent MQTT code dereferences, giving a compromised or attacker-controlled broker an arbitrary-pointer-write primitive. Contiki-NG's MQTT implementation has no TLS support so the connection is plaintext. Impact ranges from information disclosure and denial of service to remote code execution on embedded targets without memory protection. | ||||
| CVE-2026-53792 | 2 Rsync Project, Samba | 2 Rsync, Rsync | 2026-08-14 | 6.5 Medium |
| rsync before 3.5.0 contains an out-of-bounds read vulnerability in the sender-side block matching logic that allows a malicious receiver to trigger memory access before the start of an allocated buffer by sending a crafted checksum block with a length of zero. Attackers can send a specially crafted checksum set containing a zero-length block to cause a negative offset calculation during delta computation, resulting in an out-of-bounds read of file data buffer memory on the sender side. | ||||
| CVE-2026-43629 | 2 Ggml, Ggml-org | 2 Llama.cpp, Llama.cpp | 2026-08-14 | 8.1 High |
| llama.cpp builds b4882 through b9058 contain a heap buffer overflow vulnerability in the KV cache state restore path where the state_read_data() function computes write size without overflow checking, allowing attackers with write access to the slot_save_path directory to corrupt heap memory. Attackers can craft malicious state files where cell_count multiplication overflows or exceeds tensor buffer allocation to write attacker-controlled bytes past buffer boundaries, potentially resulting in heap metadata corruption, model weight corruption, or arbitrary code execution via function pointer overwrite. | ||||
| CVE-2026-29035 | 1 Civetweb Project | 1 Civetweb | 2026-08-14 | 6.5 Medium |
| CivetWeb (commit 4a4f0c95) contains a heap and stack buffer overflow vulnerability in the read_websocket() function that allows unauthenticated remote attackers to corrupt memory by sending compressed WebSocket frames when both USE_ZLIB and MG_EXPERIMENTAL_INTERFACES are defined. Attackers can negotiate permessage-deflate during the WebSocket handshake and send a crafted frame with the RSV1 bit set, causing the server to write a 4-byte zlib sync trailer out-of-bounds past the allocated buffer, leading to heap metadata corruption, denial of service, or potential code execution. | ||||
| CVE-2021-47781 | 1 Cmder | 1 Cmder | 2026-08-14 | 9.8 Critical |
| Cmder Console Emulator 1.3.18 contains a buffer overflow vulnerability that allows attackers to trigger a denial of service condition through a maliciously crafted .cmd file. Attackers can create a specially constructed .cmd file with repeated characters to overwhelm the console emulator's buffer and crash the application. | ||||
| CVE-2026-18511 | 1 Ibm | 1 I | 2026-08-14 | 7.3 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local authenticated attacker to generate a stack-based buffer overflow in the Native IBM i JSSE provider, caused by improper bounds checking during TLS session establishment. A local attacker could overflow a fixed-length buffer and execute arbitrary code on the system or cause the JVM process to crash. | ||||
| CVE-2025-43433 | 2 Apple, Redhat | 14 Ios, Ipados, Iphone Os and 11 more | 2026-08-14 | 8.8 High |
| The issue was addressed with improved memory handling. This issue is fixed in Safari 26.1, iOS 18.7.2 and iPadOS 18.7.2, iOS 26.1 and iPadOS 26.1, macOS Tahoe 26.1, tvOS 26.1, visionOS 26.1, watchOS 26.1. Processing maliciously crafted web content may lead to memory corruption. | ||||
| CVE-2026-13050 | 1 Watchguard | 40 Firebox Cloud, Firebox M270, Firebox M290 and 37 more | 2026-08-14 | 7.2 High |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS networkd process could allow an authenticated privileged user to execute arbitrary code via a specially crafted requests to the Management Web UI. | ||||
| CVE-2026-8247 | 1 Watchguard | 40 Firebox Cloud, Firebox M270, Firebox M290 and 37 more | 2026-08-14 | 8.8 High |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS may allow an unauthenticated attacker on the same local network segment to execute arbitrary code. This vulnerability affects Fireware OS 11.0 up to and including 11.12.4_Update1, 12.0 up to and including 12.12 and 2025.1 up to and including 2026.2. | ||||
| CVE-2026-62871 | 3 Apple, Linux, Microsoft | 8 Macos, Linux Kernel, .net and 5 more | 2026-08-14 | 7.8 High |
| Out-of-bounds write in .NET allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-73514 | 1 Postgis | 1 Address Standardizer | 2026-08-14 | 8.8 High |
| The address_standardizer extension for PostGIS through 3.7.0, fixed in commit 423570b, contains an out-of-bounds write vulnerability that allows a database user with the ability to supply caller-controlled relation names to standardize_address() to trigger memory corruption by providing a rules table with a classification Type value exceeding the fixed class range. Attackers can craft a malicious rules table entry with an oversized rule type value that is used without bounds checking as an index into an internal output-link table, resulting in an out-of-bounds write. | ||||
| CVE-2026-45853 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Use kvfree instead of kfree in amdgpu_gmc_get_nps_memranges() amdgpu_discovery_get_nps_info() internally allocates memory for ranges using kvcalloc(), which may use vmalloc() for large allocation. Using kfree() to release vmalloc memory will lead to a memory corruption. Use kvfree() to safely handle both kmalloc and vmalloc allocations. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-68440 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix heap overflow when reading module EEPROM txgbe_read_eeprom_hostif() always copies round_up(length, 4) bytes into the caller buffer, which ethtool allocates with exactly 'length' bytes. A non-4-aligned length therefore causes an out-of-bounds write. Copy only the remaining bytes on the final dword instead. | ||||
| CVE-2026-68262 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix user array stride in pvr_set_uobj_array() pvr_set_uobj_array() copies an array of kernel objects to a userspace array whose element size is described by out->stride. When out->stride is different from the kernel object size, the slow path advances the userspace pointer by the kernel object size and the kernel pointer by the userspace stride. This reverses the intended layout. For larger userspace strides, later copies read from the wrong kernel addresses. For smaller userspace strides, later copies are written at the wrong userspace offsets. The padding clear is also done only for the first element instead of the padding area for each element. Advance the userspace pointer by out->stride and the kernel pointer by obj_size, and clear per-element padding while the current userspace pointer is still available. | ||||
| CVE-2026-68230 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: media: amlogic-c3: Add validations for ae and awb config Avoid invalid memory access if the zones_num is bigger than zone_weight. This patch fixes the following smatch errors: drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:111 c3_isp_params_awb_wt() error: buffer overflow 'cfg->zone_weight' 768 <= u32max drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:111 c3_isp_params_awb_wt() error: buffer overflow 'cfg->zone_weight' 768 <= u32max drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:227 c3_isp_params_ae_wt() error: buffer overflow 'cfg->zone_weight' 255 <= u32max drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:227 c3_isp_params_ae_wt() error: buffer overflow 'cfg->zone_weight' 255 <= u32max | ||||
| CVE-2026-16871 | 1 Ibm | 1 I | 2026-08-13 | 4.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to a heap buffer overflow. | ||||
| CVE-2026-64273 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: iforce - bound the device-reported force-feedback effect index iforce_process_packet() handles a status report (packet id 0x02) by taking a force-feedback effect index straight from the device wire and using it to address the per-effect state array: i = data[1] & 0x7f; if (data[1] & 0x80) { if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) ... } else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) { ... } The index is masked only with 0x7f, so it ranges 0..127, but core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index of 32..127 the test_and_set_bit()/test_and_clear_bit() is an out-of-bounds single-bit read-modify-write past the array. core_effects[] is the second-to-last member of struct iforce, so the write lands in the trailing members and beyond the embedding kzalloc()'d iforce_serio / iforce_usb object. data[1] is unvalidated device payload on both transports (the USB interrupt endpoint and serio), and the status path is not gated on force feedback being present, so a malicious or counterfeit device can set or clear a bit at an attacker-chosen offset past the object. Reject an out-of-range index instead of indexing with it. Bound against the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so the check guarantees memory safety regardless of how many effects the device registered. A legitimate "effect started/stopped" status always carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are unaffected; the neighbouring mark_core_as_ready() loop is already bounded and is left untouched. | ||||
| CVE-2026-64274 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: goodix - clamp the device-reported contact count goodix_ts_read_input_report() copies the number of touch points reported by the device into an on-stack buffer u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only runtime check bounds the per-interrupt count against ts->max_touch_num, but that value is taken verbatim from a 4-bit field of the device configuration block and is never clamped: ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f; The nibble can be 0..15, so a malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can advertise up to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num of up to 15 and the second goodix_i2c_read() writes ts->contact_size * (touch_num - 1) bytes past the one-contact header into point_data - up to 30 bytes (45 with the 9-byte report format) beyond the 92-byte buffer: a stack out-of-bounds write. Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts point_data[] is sized for, when reading it from the configuration. | ||||
| CVE-2026-17218 | 1 Ibm | 1 I | 2026-08-13 | 9.8 Critical |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to execute arbitrary code due to an out-of-bounds write. | ||||