Export limit exceeded: 23799 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23799 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97494 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate and share PSP fw_pri_buf copies via psp_copy_fw Change psp_copy_fw from void to int: return -ENODEV when drm_dev_enter fails, and -EINVAL when the image size is zero or larger than the 1 MiB PSP private buffer. Replace open-coded memset/memcpy into fw_pri_buf with psp_copy_fw. | ||||
| CVE-2026-97493 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Bound GPIO I2C table entry count from VBIOS Reject undersized tables and cap the derived entry count to AMDGPU_MAX_I2C_BUS so we do not overrun adev->i2c_bus[] or walk an absurd number of entries on corrupt size fields. | ||||
| CVE-2026-92520 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Zero queue and stack outputs on lock failure Queue and stack pop/peek helpers accept an uninitialized output buffer because the verifier expects the helper to initialize it. The empty-map error path clears the buffer, but a failed lock acquisition returns -EBUSY without writing it. Clear the output before returning -EBUSY so BPF programs cannot observe uninitialized stack contents after a failed helper call. | ||||
| CVE-2026-90374 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[] band_idx comes from a 2-bit descriptor field (0-3) and was used directly to index dev->mt76.phys[] (size __MT_MAX_BAND == 3) and dereference the result. A corrupt or reserved descriptor value could index out of bounds or hit a NULL phy on parts with fewer bands. Reject invalid band indices, mirroring mt7996_rx_get_wcid(). | ||||
| CVE-2026-90326 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix race between policy activation and blkg destruction When switching an IO scheduler on a block device, blkcg_activate_policy() allocates blkg_policy_data (pd) for all blkgs attached to the queue. However, blkcg_activate_policy() may race with concurrent blkcg deletion, leading to use-after-free and memory leak issues. The use-after-free occurs in the following race: T1 (blkcg_activate_policy): - Successfully allocates pd for blkg1 (loop0->queue, blkcgA) - Fails to allocate pd for blkg2 (loop0->queue, blkcgB) - Enters the enomem rollback path to release blkg1 resources T2 (blkcg deletion): - blkcgA is deleted concurrently - blkg1 is freed via blkg_free_workfn() - blkg1->pd is freed T1 (continued): - Rollback path accesses blkg1->pd->online after pd is freed - Triggers use-after-free In addition, blkg_free_workfn() frees pd before removing the blkg from q->blkg_list. This allows blkcg_activate_policy() to allocate a new pd for a blkg that is being destroyed, leaving the newly allocated pd unreachable when the blkg is finally freed. Fix these races by extending blkcg_mutex coverage to serialize blkcg_activate_policy() rollback and blkg destruction, ensuring pd lifecycle is synchronized with blkg list visibility. | ||||
| CVE-2026-90206 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix max_qid race between configfs and controller allocation The function nvmet_subsys_attr_qid_max_store() can race against nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified. Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes: ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1); and at this exact point, a userspace process changes max_qid to 128, nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It attempts to delete active controllers to force a reconnect, but the new controller won't be deleted because it hasn't been added to the subsys->ctrls list yet. nvmet_alloc_ctrl() then proceeds and adds the new controller to the subsys->ctrls list. Later, when nvmet_install_queue() is called, it will see max_qid set to 128, but the memory allocated for sqs is only sized for 64 entries. This results in a KASAN out-of-bounds warning and potential memory corruptions. Fix this by protecting the queue allocations and list insertion in nvmet_alloc_ctrl() with down_read(&nvmet_config_sem). Because nvmet_subsys_attr_qid_max_store() acquires down_write(&nvmet_config_sem) to modify the attribute, this safely prevents the configfs writer from modifying max_qid during controller creation. Copy the max_qid from the subsystem to the controller's structure during the allocation; ctrl->max_qid never changes as long as the controller remains in LIVE state, so this will prevent similar race conditions. | ||||
| CVE-2026-89920 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix memory corruption by not reinjecting CK machine checks Channel-subsystem damage machine checks are for the host channel subsystem. The guest channel subsystem is emulated in the userspace VMM. There is no point in forwarding such machine checks into the guest. This also simplifies the machine check reinjection and avoids kfree of a stack variable as reported by sashiko. There might be still machine checks that have the ck bit set with another bit (like instruction damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and ED bits already are. | ||||
| CVE-2026-89834 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to migrate all curseg types during free_segment_range In free_segment_range(), the curseg evacuation loop only iterates up to NR_CURSEG_PERSIST_TYPE (0..5), missing non-persistent in-memory curseg types such as CURSEG_COLD_DATA_PINNED and CURSEG_ALL_DATA_ATGC. Even though these in-memory curseg types are not saved in the on-disk checkpoint header, they still occupy active physical segments at runtime. If an active in-memory curseg happens to be allocated within the segment range being truncated during filesystem shrink, failing to evacuate it will cause subsequent writes to the curseg attempting out-of-bounds I/O on the truncated storage range. Fix this by expanding the curseg evacuation loop upper bound to NR_CURSEG_TYPE to ensure all active curseg types are safely migrated out of the target range. | ||||
| CVE-2026-89761 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix out-of-bounds write when null terminating a label vec aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE is passed. If the components are all distinct no duplicates are dropped, dups is 0 and the terminator goes to vec[n], so the caller has to provide room for n + 1 entries. aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len, gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it allocates exactly len pointers. The terminator therefore lands one entry past the end of the local array when len is LOCAL_VEC_ENTRIES, and one entry past the end of the allocation when len is larger. len comes from the number of "//&" separated components in the label name and label_count_strn_entries() does not bound it. An unprivileged task reaches the parse by writing to /proc/self/attr/apparmor/current or through lsm_set_self_attr(2), both of which go through do_setattr(), and the name is parsed before the change_profile permission is checked. The query_label() path behind the securityfs .access file, which is mode 0666, performs no permission check at all. Every component has to resolve to a loaded profile, so a system with policy loaded is required. The other two VEC_FLAG_TERMINATE users work on a label vec that aa_label_alloc() has already sized with "+ 1 for null terminator entry on vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of the local array and into kzalloc(). | ||||
| CVE-2026-74711 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus) Fix type confusion in notification logic Sashiko reports: At the start of the loop in pmbus_notify(), the code unconditionally casts every attribute to a struct sensor_device_attribute: drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() { for (i = 0; i < data->num_attributes; i++) { struct device_attribute *da = to_dev_attr(data->group.attrs[i]); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int index = attr->index; ... } However, data->group.attrs can contain other types like struct pmbus_samples_reg or struct pmbus_sensor, which only embed a base struct device_attribute. If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting it to struct sensor_device_attribute and reading the index field appears to access memory past the end of the allocation, which might trigger a slab-out-of-bounds read. Additionally, if da is a struct pmbus_sensor, casting it causes the index field to overlap with the page, phase, and reg fields. Could this produce a garbage mask on little-endian systems that spuriously matches the target reg, page, and flags during an alert? Fix the problem by using struct sensor_device_attr in struct pmbus_sensor and struct pmbus_label. Since those attributes never trigger a notification, set the value of attr->index to -1 for them. Use this value to distinguish from boolean attributes which _can_ trigger a notification and use the index field to encode mask, page, and register values. | ||||
| CVE-2026-74611 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tls: rx: restore msg_iter before TLS 1.3 optimistic retry tls_decrypt_sg() advances msg->msg_iter when it maps user pages for the optimistic TLS 1.3 zero-copy path. If the decrypted record turns out not to be unpadded application data, tls_decrypt_sw() retries into a kernel skb, but leaves the iterator advanced. The subsequent copy from the skb then writes decrypted bytes again at a later point in the caller iovecs while recvmsg() reports only the post-retry length. A TLS peer can trigger this after the receiver enables TLS_RX_EXPECT_NO_PAD. Revert the iterator by the number of bytes consumed by the optimistic mapping before retrying without zero-copy. Add a selftest which sends a TLS 1.3 control record with TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not overwrite later iovecs beyond the returned length. | ||||
| CVE-2026-74317 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: do not configure xps for XDP queues netif_set_xps_queue() should not be called for an XDP Tx queue, since such queues are not netdev-exposed. On systems with number of CPUs >=64, on E610 adapter, netdev is configured with maximum number queue pairs being 63 (due to MSI-X assignment), but configuring XDP results in 64 XDP queues. So, during XDP program load, when netif_set_xps_queue() is called for the last XDP queue, we get a WARNING with a call trace and KASAN report afterwards (if enabled). [ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668 [...] [ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40 [ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84 [ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246 [ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000 [ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488 [ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000 [ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8 [ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8 [ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000 [ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0 [ 2012.700077] PKRU: 55555554 [ 2012.700080] Call Trace: [ 2012.700084] <TASK> [ 2012.700087] ? ktime_get+0x61/0x150 [ 2012.700097] ? usleep_range_state+0x133/0x1b0 [ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10 [ 2012.700114] netif_set_xps_queue+0x31/0x50 [ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe] [...] [ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe] [...] [ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40 [ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668 Skip XPS configuration for XDP Tx queues. | ||||
| CVE-2026-72380 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/pvcalls: bound backend response req_id before indexing rsp[] pvcalls_front_event_handler() takes req_id directly from the backend-supplied ring response and uses it to index the fixed-size bedata->rsp[] array for a memcpy() and a store, with no range check. A malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING and drive an out-of-bounds write past the bedata allocation. req_id was also declared int while the wire field rsp->req_id is u32, so a range check on the signed value alone is insufficient: a backend req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single bound covers both ends. A backend that sends an out-of-range req_id has violated the wire protocol, so rather than silently dropping the response, log once and stop trusting the backend: set bedata->disabled. The event handler then ignores further responses, and the request paths that wait for a response return -EIO instead of blocking forever. This mirrors the fatal-error handling xen-netback uses (xenvif_fatal_tx_err()). The pvcalls frontend currently trusts its backend, so this is not a classic-Xen security issue, but it matters for hardening PV frontends against malicious backends (confidential and disaggregated deployments). | ||||
| CVE-2026-72352 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: Fix hid_bpf_get_data() range check hid_bpf_get_data() returns a pointer into the HID-BPF context data when the caller-provided offset and size fit inside ctx->allocated_size. The current check adds rdwr_buf_size and offset before comparing the result against ctx->allocated_size. Since both values are unsigned, a very large size can wrap the sum below ctx->allocated_size and make the helper return a pointer even though the requested range is not contained in the backing buffer. Use check_add_overflow() to reject wrapped range ends before comparing the requested range end against ctx->allocated_size. | ||||
| CVE-2026-72162 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec [BUG] On-disk corruption setting l_next_free_rec to 0 in an inode's embedded extent list triggers a UBSAN panic on the next write to that file. [CAUSE] ocfs2_sum_rightmost_rec() computes i = le16_to_cpu(el->l_next_free_rec) - 1 and accesses el->l_recs[i] without validating i. When l_next_free_rec is 0, i becomes -1; when l_next_free_rec exceeds l_count, i falls past the end of the array. Either case violates the __counted_by_le(l_count) annotation on l_recs[] and triggers UBSAN. [FIX] Validate the inode's embedded extent list when the inode is read, in ocfs2_validate_inode_block(): l_count must be non-zero and no larger than the inode block can hold, and l_next_free_rec must not exceed l_count. A corrupt list is rejected at read time, before the b-tree code can index l_recs[] out of bounds. | ||||
| CVE-2026-72098 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix buffer overflow in FEC calculation There's a buffer overflow in dm-verity-fec: if (neras && *neras <= v->fec->roots) fio->erasures[(*neras)++] = i; This allows *neras to reach roots + 1 (the post-increment pushes it past roots). This value is then passed as no_eras to decode_rs8(). Inside the RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator polynomial loop writes lambda[j] where j can reach nroots + 1 — one element past the end of lambda[] (which is sized nroots + 1, valid indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting the syndrome buffer. | ||||
| CVE-2026-68401 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix out-of-bound writes in ffa_setup_and_transmit() Sashiko (locally) reports multiple out-of-bound issues in ffa_setup_and_transmit: 1) Writing ep_mem_access->reserved can write out of bounds for FFA versions < 1.2 as ffa_emad_size_get() returns 16 bytes in that case while reserved has an offset of 24. Instead of zeroing fields, memset the struct to zero first based on the FFA version. 2) Make sure there is enough size to write constituents. While at it, convert the only sizeof() in the driver that uses a type instead of variable. | ||||
| CVE-2026-68258 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds on CRIU restore queue type and mqd size We weren't checking whether the values provided in the private data in kfd CRIU restore were within bounds. For queue type, add a KFD_QUEUE_TYPE_MAX and ensure the provided type is less than it. For mqd_size, add new function mqd_size_from_queue_type and confirm that the provided mqd_size matches expectations. (cherry picked from commit f19d8086f6644083c913d70bfdeee20e1b6f46a5) | ||||
| CVE-2026-64036 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers. | ||||
| CVE-2026-63962 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes() svdm_consume_modes() checks pmdata->altmodes against the array size once before the loop over the count, but forgot to check the bound at every point in the loop. In the well-behaved SVDM discovery flow this is harmless because each of at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming ACK with any request the port actually sent. Once port->partner is set, an unsolicited Discover Modes ACK is consumed unconditionally. A broken or malicious port partner can therefore drive altmodes to ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra Discover Modes ACK with seven VDOs. Because the pre-loop check passes, the loop could then writes up to five entries past altmode_desc[]. For mode_data_prime the next field in struct tcpm_port is the partner_altmode[] pointer array, which then receives partner-chosen SVID/VDO bytes. Move the bound check inside the loop so the array can never be indexed past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner supplies or how the function was reached. | ||||