Export limit exceeded: 107168 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (107168 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98469 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix AArch32 DBGBXVR<n> handling The consolidation of the breakpoint and watchpoint register accessors switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter selects backing storage with demux_wb_reg(), which only handles Op2 values 4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits KVM_BUG_ON() and marks the VM dead. DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4, restoring the pre-regression behavior. | ||||
| CVE-2026-98465 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Serialize IMSIC attributes with vCPU migration KVM device ioctls are not serialized against KVM_RUN. As a result, kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of an IMSIC VS-file before a concurrent vCPU migration releases it. The HGEI can then be allocated to another vCPU before imsic_vsfile_rw() uses the stale tuple. A GET or SET attribute may consequently access the new owner's interrupt file. Serialize the entire IMSIC attribute operation with the target vCPU mutex. This prevents the VS-file from being migrated and recycled until the attribute access completes. Acquire the mutex killably so that the device ioctl remains interruptible while waiting for KVM_RUN to finish. | ||||
| CVE-2026-98456 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix race in read_unconf_index_list() read_unconf_index_list() counts unconfigured controllers before allocating its response, then checks the device flags again while filling it. hci_dev_list_lock stabilizes list membership, but it does not serialize the per-device flags. During asynchronous controller setup, the worker can set HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller omitted from the allocation count can then become eligible for the fill pass, causing an out-of-bounds write to rp->index[]. Allocate space for every device on hci_dev_list. Since list membership cannot change while hci_dev_list_lock is held, the response remains large enough regardless of flag transitions. The reported count and response length still include only eligible unconfigured controllers. | ||||
| CVE-2026-98454 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix create context out-of-bounds reads smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open. | ||||
| CVE-2026-98451 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: use finish_no_open() for non-regular inodes An O_CREAT open can find an existing symlink or another non-regular inode. cifs_atomic_open() calls finish_open() on it and attaches a cifsFileInfo. Symlink inodes have no CIFS release operation, so the dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also prevents the VFS from following the symlink. Track whether cifs_do_create() returned an open server handle. For non-regular inodes, close the handle if present, remove the pending open, and call finish_no_open() so the VFS can continue the lookup. Do not set FMODE_CREATED unless a regular file was opened. For O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's -EFTYPE check. Defer closing a legacy POSIX handle on a non-regular inode until after inode lookup. This avoids closing it again if lookup fails. | ||||
| CVE-2026-98443 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix cursor and pointer handling when recovering iunlink buckets LOLLM pointed out a bug in xlog_recover_iunlink_bucket: 1. We don't null out prev_ip after releasing it, which can lead to UAF problems if the inodegc flush call in the loop fails. at which point I noticed even more bugs: 2. If the inodegc flush inside the loop fails, we also leak @ip. 3. We set prev_agino to agino having already advanced agino, which results in inodes with i_prev_unlinked set to itself. 4. If we exit the bottom of the loop with prev_ip set, then prev_ip aliases ip and we also set its i_prev_unlinked to itself. Bugs 3 and 4 introduce loops into the unlinked list, though these loops don't surface because we immediately flush each unlinked inode after loading it. Fix all of these issues. | ||||
| CVE-2026-98442 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix helper UAF due to extensions realloc While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway. | ||||
| CVE-2026-98441 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: avoid modifying shared unconfirmed ct entry In a case where skb with an unconfirmed ct entry gets cloned, we may end up processing both again but with different sets of extensions. The series of events: 1. The first clone wants to commit and runs the helpers wiring up the extension pointer into the expectation list. 2. Then it looses the confirmation keeping the entry unconfirmed. 3. Second clone now wants to commit labels or run NAT and adds the new extension for that breaking the pointer in the expectation list causing UAF on the destruction path later. While this is possible to trigger, there should be no practical network pipeline where we need to process both clones without modifications in the same zone. So, let's just reset the entry in case for some reason we got an skb with a shared one. This doesn't affect any known use cases, but avoids any potential problems with sharing and modification of the unconfirmed ct entry. Unlike openvswitch module, act_ct allows for NAT without commit. Changing that would be a uAPI break. So, act_ct needs to reset on NAT regardless of the commit flag to avoid reallocation of the extension space. This, however, doesn't really change the picture for sensible networking cases as there should be no need to run the same packet twice (before and after the clone) through conntrack without packet header or zone changes and without commit. The fixes tag points to the introduction of helpers, since that's the main UAF trigger for the sharing. | ||||
| CVE-2026-98440 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Delay freeing of shadow S2 structures until VM destruction We free the shadow S2 structures from kvm_arch_flush_shadow_all(), which is a Bad Idea(tm). Freeing the page tables is fair game (this is what this callback is for), but freeing the container that could still be referenced by another part of the system is not great. Instead, grow separate destructors that gets called when we tear the VM down for good. From there, we can nuke both the individual MMUs as well as the global array that points to them, safe in the knowledge that the vcpus themselves have been destroyed already. | ||||
| CVE-2026-98405 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix missing iov bounds check in parse_posix_sids() In parse_posix_sids(), sidsbuf_end is calculated using the server-supplied out_len without being validated against the actual length of the received iov (iov_len). If a server provides an inflated out_len, sidsbuf_end will point past the end of the iov. This defeats the bounds guards in posix_info_sid_size(), allowing out-of-bounds reads into adjacent kernel memory. Fix this by rejecting responses where the calculated sidsbuf_end would exceed the received iov boundaries or cause pointer wraparound. | ||||
| CVE-2026-98401 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: iptunnel: fix stale transport header during tunnel decapsulation Syzbot reported a crash in qdisc_pkt_len_segs_init() caused by a stale transport_header offset after tunnel decapsulation. BUG: unable to handle page fault for address: ffffed102091a42e Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 340 Comm: qdisc_uaf_repro Not tainted 7.2.0-rc4-00061-g248951ddc14d #256 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__asan_load2 <IRQ> qdisc_pkt_len_segs_init (net/core/dev.c:4145) __dev_queue_xmit (net/core/dev.c:4787) br_dev_queue_push_xmit (net/bridge/br_forward.c:53) br_handle_frame_finish (net/bridge/br_input.c:229) br_handle_frame (net/bridge/br_input.c:315) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6099) __netif_receive_skb_list_core (net/core/dev.c:6287) netif_receive_skb_list_internal (net/core/dev.c:6445) napi_complete_done (net/core/dev.c:6813) gro_cell_poll (net/core/gro_cells.c:74) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7798 net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) do_softirq (kernel/softirq.c:523 kernel/softirq.c:510 ) __local_bh_enable_ip (kernel/softirq.c:450) tun_get_user (drivers/net/tun.c:1986 (discriminator 1)) tun_chr_write_iter (drivers/net/tun.c:2032) The issue is completely latent until qdisc read transport header in commit 7fb4c1967011 ("net: pull headers in qdisc_pkt_len_segs_init()"). The crash requires four conditions to line up: 1. The incoming packet is encapsulated and carries GSO metadata. The outer transport header offset is stored in skb->transport_header while the packet is still in the outer tunnel context. 2. The tunnel receiver strips the outer headers. skb->data is advanced to the inner frame, but skb->transport_header is left pointing to the now-removed outer L4 header, so it becomes a negative offset relative to the new data. 3. The inner frame is not delivered to the local IP stack. Instead, it is forwarded at L2 by a bridge or HSR, so ip_rcv_core() never runs and the transport header is not reset to the inner L4 offset. 4. The forwarding path calls __dev_queue_xmit(), which enters qdisc_pkt_len_segs_init(). That function computes the GSO header length from skb_transport_offset(skb). Because the offset is negative, the unsigned cast overflows and pskb_may_pull(skb, hdr_len + sizeof(struct tcphdr)) reads past the end of the skb, triggering a KASAN fault or page fault. The issue specifically requires GSO packets (shinfo->gso_size != 0), which are processed/aggregated through gro_cells. Fix this by clearing transport_header to the ~0U sentinel in gro_cell for all tunnnel driver. GTP does not support GRO/GSO, drop the evil GSO packets in GTP directly. | ||||
| CVE-2026-98383 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL An LWT_SEG6LOCAL program can invalidate its cached SRH with bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter may reallocate skb->head, leaving the per-CPU SRH pointer dangling. Post-program SRH validation then writes through that pointer. Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier rejects this unsafe helper combination. Other LWT program types continue to expose the helper through lwt_out_func_proto(). | ||||
| CVE-2026-98382 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject dev-bound-only programs on other devices __bpf_offload_dev_match() falls back to comparing offdev pointers after an exact netdev mismatch. Bound-only programs normally have NULL offdevs, so unrelated netdevs compare equal. A bound-only program on an offload-registered netdev can instead inherit a real offdev and match a sibling port. With CAP_BPF and CAP_NET_ADMIN, a caller can use bpf(BPF_LINK_CREATE) with a different target ifindex to run metadata kfuncs specialized for the bound driver on the target driver's xdp_buff. Running a veth-bound program on tun reads beyond tun's bare stack xdp_buff as a veth_xdp_buff. Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:veth_xdp_rx_timestamp (drivers/net/veth.c:1673) Call Trace: ... tun_build_skb (drivers/net/tun.c:1739) tun_get_user (drivers/net/tun.c:1856) tun_chr_write_iter (drivers/net/tun.c:2091) vfs_write (fs/read_write.c:595 fs/read_write.c:687) ksys_write (fs/read_write.c:739) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt Restrict non-offloaded programs to exact netdev matches and retain the shared-offdev fallback only for genuinely offloaded multi-port programs. | ||||
| CVE-2026-98381 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: veth: manage XDP program pointers during channel resize veth_set_channels() tears down XDP resources for removed RX queues without clearing rq->xdp_prog. If the program is then detached or replaced, those queues keep the old pointer after bpf_prog_put(). A later channel increase can re-enable NAPI and run the freed program. BUG: unable to handle page fault for address: ffffc90000256048 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: veth_xdp_rcv_skb (include/linux/filter.h:779 include/net/xdp.h:696 drivers/net/veth.c:820) Call Trace: veth_xdp_rcv (drivers/net/veth.c:941) veth_poll (drivers/net/veth.c:986) __napi_poll (net/core/dev.c:7787) net_rx_action (net/core/dev.c:7850 net/core/dev.c:8007) handle_softirqs (kernel/softirq.c:645) Kernel panic - not syncing: Fatal exception in interrupt | ||||
| CVE-2026-98376 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Use array_map_meta_equal for percpu array inner map replacement percpu_array_map_ops.map_meta_equal points to the generic bpf_map_meta_equal(), which does not compare max_entries. When a percpu array serves as an inner map, replacing it with one that has fewer max_entries bypasses the check. Since percpu_array_map_gen_lookup() inlines the original template's index_mask as a JIT immediate, a lookup on the replacement map can access pptrs[] out of bounds. Point percpu_array_map_ops.map_meta_equal to array_map_meta_equal(), which already enforces the max_entries equality check. Add a selftest to verify that replacing a percpu array inner map with a differently-sized one is rejected. | ||||
| CVE-2026-98374 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: fix use-after-free of retransmit_skb_hint in tcp_send_synack() When tcp_send_synack() replaces the cloned SYN skb at the head of the retransmit queue with a copy, it frees the original with tcp_rtx_queue_unlink_and_free() and only repairs tp->highest_sack. tp->retransmit_skb_hint keeps pointing at the freed skbuff_fclone_cache object. The dangling hint is read in tcp_verify_retransmit_hint() and used as the root of the rbtree walk in tcp_xmit_retransmit_queue(). An unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with an attacker-supplied ICMP fragmentation-needed message, after which a simultaneous open frees the armed SYN skb: BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316) Read of size 4 at addr ffff88800604d928 by task swapper/1/0 Call Trace: tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316) tcp_simple_retransmit (net/ipv4/tcp_input.c:3158) tcp_v4_err (net/ipv4/tcp_ipv4.c:587) Sync the hint to the copy. | ||||
| CVE-2026-88186 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-10-24 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-116016 | 1 Yunaiv | 1 Yudao-cloud | 2026-10-24 | 7.1 High |
| yudao-cloud through 2026.09 contains an authorization bypass vulnerability that allows authenticated users to evade row-level data scope restrictions by sending a data-permission-enable header set to false. Attackers can add this header to /admin-api requests, which DataPermissionRpcWebFilter trusts, to read or modify other departments' and users' records within the same tenant. | ||||
| CVE-2026-102194 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-24 | 7 High |
| Use after free in Windows Graphics Kernel allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-94512 | 1 Microsoft | 12 Microsoft Sql Server 2017 (gdr), Microsoft Sql Server 2017 For X64-based Systems \(cu31\), Microsoft Sql Server 2019 (gdr) and 9 more | 2026-10-24 | 8.8 High |
| Heap-based buffer overflow in SQL Server allows an authorized attacker to execute code over a network. | ||||