Export limit exceeded: 10435 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10435 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43060 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: drop pending enqueued packets on removal Packets sitting in nfqueue might hold a reference to: - templates that specify the conntrack zone, because a percpu area is used and module removal is possible. - conntrack timeout policies and helper, where object removal leave a stale reference. Since these objects can just go away, drop enqueued packets to avoid stale reference to them. If there is a need for finer grain removal, this logic can be revisited to make selective packet drop upon dependencies. | ||||
| CVE-2026-43019 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix potential UAF in set_cig_params_sync hci_conn lookup and field access must be covered by hdev lock in set_cig_params_sync, otherwise it's possible it is freed concurrently. Take hdev lock to prevent hci_conn from being deleted or modified concurrently. Just RCU lock is not suitable here, as we also want to avoid "tearing" in the configuration. | ||||
| CVE-2026-31731 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Address thermal zone removal races with resume Since thermal_zone_pm_complete() and thermal_zone_device_resume() re-initialize the poll_queue delayed work for the given thermal zone, the cancel_delayed_work_sync() in thermal_zone_device_unregister() may miss some already running work items and the thermal zone may be freed prematurely [1]. There are two failing scenarios that both start with running thermal_pm_notify_complete() right before invoking thermal_zone_device_unregister() for one of the thermal zones. In the first scenario, there is a work item already running for the given thermal zone when thermal_pm_notify_complete() calls thermal_zone_pm_complete() for that thermal zone and it continues to run when thermal_zone_device_unregister() starts. Since the poll_queue delayed work has been re-initialized by thermal_pm_notify_complete(), the running work item will be missed by the cancel_delayed_work_sync() in thermal_zone_device_unregister() and if it continues to run past the freeing of the thermal zone object, a use-after-free will occur. In the second scenario, thermal_zone_device_resume() queued up by thermal_pm_notify_complete() runs right after the thermal_zone_exit() called by thermal_zone_device_unregister() has returned. The poll_queue delayed work is re-initialized by it before cancel_delayed_work_sync() is called by thermal_zone_device_unregister(), so it may continue to run after the freeing of the thermal zone object, which also leads to a use-after-free. Address the first failing scenario by ensuring that no thermal work items will be running when thermal_pm_notify_complete() is called. For this purpose, first move the cancel_delayed_work() call from thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent new work from entering the workqueue going forward. Next, switch over to using a dedicated workqueue for thermal events and update the code in thermal_pm_notify() to flush that workqueue after thermal_pm_notify_prepare() has returned which will take care of all leftover thermal work already on the workqueue (that leftover work would do nothing useful anyway because all of the thermal zones have been flagged as suspended). The second failing scenario is addressed by adding a tz->state check to thermal_zone_device_resume() to prevent it from re-initializing the poll_queue delayed work if the thermal zone is going away. Note that the above changes will also facilitate relocating the suspend and resume of thermal zones closer to the suspend and resume of devices, respectively. | ||||
| CVE-2026-110919 | 1 Google | 1 Chrome | 2026-10-19 | 8.8 High |
| Use after free in V8 in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-110921 | 1 Google | 1 Chrome | 2026-10-19 | 8.8 High |
| Use after free in V8 in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-110922 | 1 Google | 1 Chrome | 2026-10-19 | 8.8 High |
| Use after free in Prerender in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Critical) | ||||
| CVE-2026-31680 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: flowlabel: defer exclusive option free until RCU teardown `ip6fl_seq_show()` walks the global flowlabel hash under the seq-file RCU read-side lock and prints `fl->opt->opt_nflen` when an option block is present. Exclusive flowlabels currently free `fl->opt` as soon as `fl->users` drops to zero in `fl_release()`. However, the surrounding `struct ip6_flowlabel` remains visible in the global hash table until later garbage collection removes it and `fl_free_rcu()` finally tears it down. A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that early `kfree()` and dereference freed option state, triggering a crash in `ip6fl_seq_show()`. Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches the lifetime already required for the enclosing flowlabel while readers can still reach it under RCU. | ||||
| CVE-2026-31657 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: hold claim backbone gateways by reference batadv_bla_add_claim() can replace claim->backbone_gw and drop the old gateway's last reference while readers still follow the pointer. The netlink claim dump path dereferences claim->backbone_gw->orig and takes claim->backbone_gw->crc_lock without pinning the underlying backbone gateway. batadv_bla_check_claim() still has the same naked pointer access pattern. Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate on a stable gateway reference until the read-side work is complete. This keeps the dump and claim-check paths aligned with the lifetime rules introduced for the other BLA claim readers. | ||||
| CVE-2026-31516 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: prevent policy_hthresh.work from racing with netns teardown A XFRM_MSG_NEWSPDINFO request can queue the per-net work item policy_hthresh.work onto the system workqueue. The queued callback, xfrm_hash_rebuild(), retrieves the enclosing struct net via container_of(). If the net namespace is torn down before that work runs, the associated struct net may already have been freed, and xfrm_hash_rebuild() may then dereference stale memory. xfrm_policy_fini() already flushes policy_hash_work during teardown, but it does not synchronize policy_hthresh.work. Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the queued work cannot outlive the net namespace teardown and access a freed struct net. | ||||
| CVE-2026-31504 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: fix fanout UAF in packet_release() via NETDEV_UP race `packet_release()` has a race window where `NETDEV_UP` can re-register a socket into a fanout group's `arr[]` array. The re-registration is not cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout array. `packet_release()` does NOT zero `po->num` in its `bind_lock` section. After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex` still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)` that already found the socket in `sklist` can re-register the hook. For fanout sockets, this re-registration calls `__fanout_link(sk, po)` which adds the socket back into `f->arr[]` and increments `f->num_members`, but does NOT increment `f->sk_ref`. The fix sets `po->num` to zero in `packet_release` while `bind_lock` is held to prevent NETDEV_UP from linking, preventing the race window. This bug was found following an additional audit with Claude Code based on CVE-2025-38617. | ||||
| CVE-2026-31473 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices. | ||||
| CVE-2026-31453 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: avoid dereferencing log items after push callbacks After xfsaild_push_item() calls iop_push(), the log item may have been freed if the AIL lock was dropped during the push. Background inode reclaim or the dquot shrinker can free the log item while the AIL lock is not held, and the tracepoints in the switch statement dereference the log item after iop_push() returns. Fix this by capturing the log item type, flags, and LSN before calling xfsaild_push_item(), and introducing a new xfs_ail_push_class trace event class that takes these pre-captured values and the ailp pointer instead of the log item pointer. | ||||
| CVE-2026-31442 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix possible invalid memory access after FLR In the case that the first Function Level Reset (FLR) concludes correctly, but in the second FLR the scratch area for the saved configuration cannot be allocated, it's possible for a invalid memory access to happen. Always set the deallocated scratch area to NULL after FLR completes. | ||||
| CVE-2026-31419 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free in bond_xmit_broadcast() bond_xmit_broadcast() reuses the original skb for the last slave (determined by bond_is_last_slave()) and clones it for others. Concurrent slave enslave/release can mutate the slave list during RCU-protected iteration, changing which slave is "last" mid-loop. This causes the original skb to be double-consumed (double-freed). Replace the racy bond_is_last_slave() check with a simple index comparison (i + 1 == slaves_count) against the pre-snapshot slave count taken via READ_ONCE() before the loop. This preserves the zero-copy optimization for the last slave while making the "last" determination stable against concurrent list mutations. The UAF can trigger the following crash: ================================================================== BUG: KASAN: slab-use-after-free in skb_clone Read of size 8 at addr ffff888100ef8d40 by task exploit/147 CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334) bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593) dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887) __dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838) ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136) ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219) ip6_output (net/ipv6/ip6_output.c:250) ip6_send_skb (net/ipv6/ip6_output.c:1985) udp_v6_send_skb (net/ipv6/udp.c:1442) udpv6_sendmsg (net/ipv6/udp.c:1733) __sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Allocated by task 147: Freed by task 147: The buggy address belongs to the object at ffff888100ef8c80 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 192 bytes inside of freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60) Memory state around the buggy address: ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== | ||||
| CVE-2026-31403 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Hold net reference for the lifetime of /proc/fs/nfs/exports fd The /proc/fs/nfs/exports proc entry is created at module init and persists for the module's lifetime. exports_proc_open() captures the caller's current network namespace and stores its svc_export_cache in seq->private, but takes no reference on the namespace. If the namespace is subsequently torn down (e.g. container destruction after the opener does setns() to a different namespace), nfsd_net_exit() calls nfsd_export_shutdown() which frees the cache. Subsequent reads on the still-open fd dereference the freed cache_detail, walking a freed hash table. Hold a reference on the struct net for the lifetime of the open file descriptor. This prevents nfsd_net_exit() from running -- and thus prevents nfsd_export_shutdown() from freeing the cache -- while any exports fd is open. cache_detail already stores its net pointer (cd->net, set by cache_create_net()), so exports_release() can retrieve it without additional per-file storage. | ||||
| CVE-2026-23461 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free in l2cap_unregister_user After commit ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del"), l2cap_conn_del() uses conn->lock to protect access to conn->users. However, l2cap_register_user() and l2cap_unregister_user() don't use conn->lock, creating a race condition where these functions can access conn->users and conn->hchan concurrently with l2cap_conn_del(). This can lead to use-after-free and list corruption bugs, as reported by syzbot. Fix this by changing l2cap_register_user() and l2cap_unregister_user() to use conn->lock instead of hci_dev_lock(), ensuring consistent locking for the l2cap_conn structure. | ||||
| CVE-2026-23450 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix NULL dereference and UAF in smc_tcp_syn_recv_sock() Syzkaller reported a panic in smc_tcp_syn_recv_sock() [1]. smc_tcp_syn_recv_sock() is called in the TCP receive path (softirq) via icsk_af_ops->syn_recv_sock on the clcsock (TCP listening socket). It reads sk_user_data to get the smc_sock pointer. However, when the SMC listen socket is being closed concurrently, smc_close_active() sets clcsock->sk_user_data to NULL under sk_callback_lock, and then the smc_sock itself can be freed via sock_put() in smc_release(). This leads to two issues: 1) NULL pointer dereference: sk_user_data is NULL when accessed. 2) Use-after-free: sk_user_data is read as non-NULL, but the smc_sock is freed before its fields (e.g., queued_smc_hs, ori_af_ops) are accessed. The race window looks like this (the syzkaller crash [1] triggers via the SYN cookie path: tcp_get_cookie_sock() -> smc_tcp_syn_recv_sock(), but the normal tcp_check_req() path has the same race): CPU A (softirq) CPU B (process ctx) tcp_v4_rcv() TCP_NEW_SYN_RECV: sk = req->rsk_listener sock_hold(sk) /* No lock on listener */ smc_close_active(): write_lock_bh(cb_lock) sk_user_data = NULL write_unlock_bh(cb_lock) ... smc_clcsock_release() sock_put(smc->sk) x2 -> smc_sock freed! tcp_check_req() smc_tcp_syn_recv_sock(): smc = user_data(sk) -> NULL or dangling smc->queued_smc_hs -> crash! Note that the clcsock and smc_sock are two independent objects with separate refcounts. TCP stack holds a reference on the clcsock, which keeps it alive, but this does NOT prevent the smc_sock from being freed. Fix this by using RCU and refcount_inc_not_zero() to safely access smc_sock. Since smc_tcp_syn_recv_sock() is called in the TCP three-way handshake path, taking read_lock_bh on sk_callback_lock is too heavy and would not survive a SYN flood attack. Using rcu_read_lock() is much more lightweight. - Set SOCK_RCU_FREE on the SMC listen socket so that smc_sock freeing is deferred until after the RCU grace period. This guarantees the memory is still valid when accessed inside rcu_read_lock(). - Use rcu_read_lock() to protect reading sk_user_data. - Use refcount_inc_not_zero(&smc->sk.sk_refcnt) to pin the smc_sock. If the refcount has already reached zero (close path completed), it returns false and we bail out safely. Note: smc_hs_congested() has a similar lockless read of sk_user_data without rcu_read_lock(), but it only checks for NULL and accesses the global smc_hs_wq, never dereferencing any smc_sock field, so it is not affected. Reproducer was verified with mdelay injection and smc_run, the issue no longer occurs with this patch applied. [1] https://syzkaller.appspot.com/bug?extid=827ae2bfb3a3529333e9 | ||||
| CVE-2026-23445 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: igc: fix page fault in XDP TX timestamps handling If an XDP application that requested TX timestamping is shutting down while the link of the interface in use is still up the following kernel splat is reported: [ 883.803618] [ T1554] BUG: unable to handle page fault for address: ffffcfb6200fd008 ... [ 883.803650] [ T1554] Call Trace: [ 883.803652] [ T1554] <TASK> [ 883.803654] [ T1554] igc_ptp_tx_tstamp_event+0xdf/0x160 [igc] [ 883.803660] [ T1554] igc_tsync_interrupt+0x2d5/0x300 [igc] ... During shutdown of the TX ring the xsk_meta pointers are left behind, so that the IRQ handler is trying to touch them. This issue is now being fixed by cleaning up the stale xsk meta data on TX shutdown. TX timestamps on other queues remain unaffected. | ||||
| CVE-2026-23391 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_CT: drop pending enqueued packets on template removal Templates refer to objects that can go away while packets are sitting in nfqueue refer to: - helper, this can be an issue on module removal. - timeout policy, nfnetlink_cttimeout might remove it. The use of templates with zone and event cache filter are safe, since this just copies values. Flush these enqueued packets in case the template rule gets removed. | ||||
| CVE-2026-23340 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: <TASK> ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... </TASK> Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling. | ||||