Export limit exceeded: 10435 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10435 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52982 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit() syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit() when accessing skb->len for tx statistics after usb_submit_urb() has been called: BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760 drivers/net/usb/rtl8150.c:712 Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226 The URB completion handler write_bulk_callback() frees the skb via dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU in softirq context before usb_submit_urb() returns in the submitter, so by the time the submitter reads skb->len the skb has already been queued to the per-CPU completion_queue and freed by net_tx_action(): CPU A (xmit) CPU B (USB completion softirq) ------------ ------------------------------ dev->tx_skb = skb; usb_submit_urb() --+ |-------> write_bulk_callback() | dev_kfree_skb_irq(dev->tx_skb) | net_tx_action() | napi_skb_cache_put() <-- free netdev->stats.tx_bytes | += skb->len; <-- UAF read Fix it by caching skb->len before submitting the URB and using the cached value when updating the tx_bytes counter. The pre-existing tx_bytes semantics are preserved: the counter tracks the original frame length (skb->len), not the ETH_ZLEN/USB-alignment padded "count" value that is handed to the device. Changing that would be a user-visible accounting change and is out of scope for this UAF fix. | ||||
| CVE-2026-52971 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ena: PHC: Fix potential use-after-free in get_timestamp Move the phc->active check and resp pointer assignment to after acquiring the spinlock. Previously, phc->active was checked without holding the lock, and resp was cached from ena_dev->phc.virt_addr before the lock was acquired. If ena_com_phc_destroy() runs between the lockless active check and the lock acquisition, it sets active=false, releases the lock, frees the DMA memory, and sets virt_addr=NULL. The get_timestamp path would then read a NULL virt_addr and dereference it. With both the active check and the pointer read under the lock, destroy cannot free the memory while get_timestamp is using it. | ||||
| CVE-2026-52951 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: handle empty bo and UAF races There look to be some nasty races here when triggering the invalidate_mappings hook: 1) We do xe_bo_alloc() followed by the attach, before the actual full bo init step in xe_dma_buf_init_obj(). However the bo is visible on the attachments list after the attach. This is bad since exporter driver, say amdgpu, can at any time call back into our invalidate_mappings hook, with an empty/bogus bo, leading to potential bugs/crashes. 2) Similar to 1) but here we get a UAF, when the invalidate_mappings hook is triggered. For example, we get as far as xe_bo_init_locked() but this fails in some way. But here the bo will be freed on error, but we still have it attached from dma-buf pov, so if the invalidate_mappings is now triggered then the bo we access is gone and we trigger UAF and more bugs/crashes. To fix this, move the attach step until after we actually have a fully set up buffer object. Note that the bo is not published to userspace until later, so not sure what the comment "Don't publish the bo until we have a valid attachment", is referring to. We have at least two different customers reporting hitting a NULL ptr deref in evict_flags when importing something from amdgpu, followed by triggering the evict flow. Hit rate is also pretty low, which would hint at some kind of race, so something like 1) or 2) might explain this. v2: - Shuffle the order of the ops slightly (no functional change) - Improve the comment to better explain the ordering (Matt B) (cherry picked from commit af1f2ad0c59fe4e2f924c526f66e968289d77971) | ||||
| CVE-2026-52947 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix refcount saturation and potential UAF in qrtr_port_remove In qrtr_port_remove(), the socket reference count is decremented via __sock_put() before the port is removed from the qrtr_ports XArray and before the RCU grace period elapses. This breaks the fundamental RCU update paradigm. It exposes a race window where a concurrent RCU reader (such as qrtr_reset_ports() or qrtr_port_lookup()) can obtain a pointer to the socket from the XArray, and attempt to call sock_hold() on a socket whose reference count has already dropped to zero. This exact race condition was hit during syzkaller fuzzing, leading to the following refcount saturation warning and a potential Use-After-Free: refcount_t: saturated; leaking memory. WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0 Modules linked in: qrtr(+) bochs drm_shmem_helper ... Call Trace: <TASK> qrtr_reset_ports net/qrtr/af_qrtr.c:768 [inline] [qrtr] __qrtr_bind.isra.0+0x48b/0x570 net/qrtr/af_qrtr.c:805 [qrtr] qrtr_bind+0x17d/0x210 net/qrtr/af_qrtr.c:901 [qrtr] kernel_bind+0xe4/0x120 net/socket.c:3592 qrtr_ns_init+0x1a6/0x380 net/qrtr/ns.c:715 [qrtr] qrtr_proto_init+0x3b/0xff0 net/qrtr/af_qrtr.c:169 [qrtr] do_one_initcall+0xf5/0x5e0 init/main.c:1283 ... </TASK> Fix this by deferring the reference count decrement until after the xa_erase() and the synchronize_rcu() complete. (Note: The v1 of this patch incorrectly replaced __sock_put() with sock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove() still hold a reference to the socket, so freeing the socket memory here would lead to a subsequent UAF in the caller. Thus, the __sock_put() is kept, but only repositioned to close the RCU race.) | ||||
| CVE-2026-52924 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: purge outqueue on stale COOKIE-ECHO handling sctp_stream_update() is only invoked when the association is moved into COOKIE_WAIT during association setup/reconfiguration. In this path, the outbound stream scheduler state (stream->out_curr) is expected to be clean, since no user data should have been transmitted yet unless the state machine has already partially progressed. However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a Stale Cookie ERROR is received, the association is rolled back from COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already have been queued and even bundled with the COOKIE-ECHO chunk. During the rollback, sctp_stream_update() frees the old stream table and installs a new one, but it does not invalidate stream->out_curr. As a result, out_curr may still point to a freed sctp_stream_out entry from the previous stream state. Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on stream->out_curr->ext, which can lead to use-after-free once the old stream state has been released via sctp_stream_free(). This results in crashes such as (reported by Yuqi): BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140 Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312 CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full) sctp_sched_fcfs_dequeue+0x13a/0x140 sctp_outq_flush+0x1603/0x33e0 sctp_do_sm+0x31c9/0x5d30 sctp_assoc_bh_rcv+0x392/0x6f0 sctp_inq_push+0x1db/0x270 sctp_rcv+0x138d/0x3c10 Fix this by fully purging the association outqueue when handling the Stale Cookie case. This ensures all pending transmit and retransmit state is dropped, and any scheduler cached pointers are invalidated, making it safe to rebuild stream state during COOKIE_WAIT restart. Updating only stream->out_curr would be insufficient, since queued and retransmittable data would still reference the old stream state and trigger later use-after-free in dequeue paths. | ||||
| CVE-2026-52910 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Free reuseport cBPF prog after RCU grace period. Eulgyu Kim reported the splat below with a repro. [0] The repro sets up a UDP reuseport group with a cBPF prog and replaces it with a new one while another thread is sending a UDP packet to the group. The reuseport prog is freed by sk_reuseport_prog_free(). bpf_prog_put() is called for "e"BPF prog to destruct through multiple stages while cBPF prog is freed immediately by bpf_release_orig_filter() and bpf_prog_free(). If a reuseport prog is detached from the setsockopt() path (reuseport_attach_prog() or reuseport_detach_prog()), sk_reuseport_prog_free() is called without waiting for RCU readers to complete, resulting in various bugs. Let's defer freeing the reuseport cBPF prog after one RCU grace period. Note "e"BPF prog is safe as is unless the fast path starts to touch fields destroyed in bpf_prog_put_deferred() and __bpf_prog_put_noref(). [0]: BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 Read of size 4 at addr ffffc9000051e004 by task slowme/10208 CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495 __udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723 __udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752 __udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6181 [inline] __netif_receive_skb net/core/dev.c:6294 [inline] process_backlog+0xaa4/0x1960 net/core/dev.c:6645 __napi_poll+0xae/0x340 net/core/dev.c:7709 napi_poll net/core/dev.c:7772 [inline] net_rx_action+0x5d7/0xf50 net/core/dev.c:7929 handle_softirqs+0x22b/0x870 kernel/softirq.c:622 do_softirq+0x76/0xd0 kernel/softirq.c:523 </IRQ> <TASK> __local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline] __dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip_output+0x29f/0x450 net/ipv4/ip_output.c:438 ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508 udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195 udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] __sys_sendto+0x554/0x680 net/socket.c:2206 __do_sys_sendto net/socket.c:2213 [inline] __se_sys_sendto net/socket.c:2209 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2209 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x415a2d Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003 RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010 R10: 0000000000000000 R11: ---truncated--- | ||||
| CVE-2026-46319 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: Only release RCU read lock after ct_ft When looking up a flow table in act_ct in tcf_ct_flow_table_get(), rhashtable_lookup_fast() internally opens and closes an RCU read critical section before returning ct_ft. The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero() is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ft object. This vulnerability can lead to privilege escalation. Analysis from zdi-disclosures@trendmicro.com: When initializing act_ct, tcf_ct_init() is called, which internally triggers tcf_ct_flow_table_get(). static int tcf_ct_flow_table_get(struct net *net, struct tcf_ct_params *params) { struct zones_ht_key key = { .net = net, .zone = params->zone }; struct tcf_ct_flow_table *ct_ft; int err = -ENOMEM; mutex_lock(&zones_mutex); ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1] if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2] goto out_unlock; ... } static __always_inline void *rhashtable_lookup_fast( struct rhashtable *ht, const void *key, const struct rhashtable_params params) { void *obj; rcu_read_lock(); obj = rhashtable_lookup(ht, key, params); rcu_read_unlock(); return obj; } At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ft from zones_ht . The lookup is performed within an RCU read critical section through rcu_read_lock() / rcu_read_unlock(), which prevents the object from being freed. However, at the point of function return, rcu_read_unlock() has already been called, and there is nothing preventing ct_ft from being freed before reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomes the race window, during which ct_ft can be freed. Free Process: tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu() tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put(). static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft) { if (refcount_dec_and_test(&ct_ft->ref)) { rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params); INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3] queue_rcu_work(act_ct_wq, &ct_ft->rwork); } } At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU work static void tcf_ct_flow_table_cleanup_work(struct work_struct *work) { struct tcf_ct_flow_table *ct_ft; struct flow_block *block; ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table, rwork); nf_flow_table_free(&ct_ft->nf_ft); block = &ct_ft->nf_ft.flow_block; down_write(&ct_ft->nf_ft.flow_block_lock); WARN_ON(!list_empty(&block->cb_list)); up_write(&ct_ft->nf_ft.flow_block_lock); kfree(ct_ft); // [4] module_put(THIS_MODULE); } tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executes between [1] and [2], UAF occurs. This race condition has a very short race window, making it generally difficult to trigger. Therefore, to trigger the vulnerability an msleep(100) was inserted after[1] | ||||
| CVE-2026-46317 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Reassign nested_mmus array behind mmu_lock kvm->arch.nested_mmus[] is walked under kvm->mmu_lock, including from the MMU notifier path (kvm_unmap_gfn_range() -> kvm_nested_s2_unmap()), which can run at any time. kvm_vcpu_init_nested() reallocates the array and frees the old buffer while holding only kvm->arch.config_lock, so such a walker can reference the freed array. Allocate the new array outside of mmu_lock, as the allocation can sleep. Under the lock, copy the existing entries, fix up the back pointers and reassign the array. Free the old buffer after dropping the lock, as kvfree() can sleep as well. | ||||
| CVE-2026-46280 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: lib: test_hmm: evict device pages on file close to avoid use-after-free Patch series "Minor hmm_test fixes and cleanups". Two bugfixes a cleanup for the HMM kernel selftests. These were mostly reported by Zenghui Yu with special thanks to Lorenzo for analysing and pointing out the problems. This patch (of 3): When dmirror_fops_release() is called it frees the dmirror struct but doesn't migrate device private pages back to system memory first. This leaves those pages with a dangling zone_device_data pointer to the freed dmirror. If a subsequent fault occurs on those pages (eg. during coredump) the dmirror_devmem_fault() callback dereferences the stale pointer causing a kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64, where a test failure triggered SIGABRT and the resulting coredump walked the VMAs faulting in the stale device private pages. Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in dmirror_fops_release() to migrate all device private pages back to system memory before freeing the dmirror struct. The function is moved earlier in the file to avoid a forward declaration. | ||||
| CVE-2026-46259 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: procfs: fix missing RCU protection when reading real_parent in do_task_stat() When reading /proc/[pid]/stat, do_task_stat() accesses task->real_parent without proper RCU protection, which leads to: cpu 0 cpu 1 ----- ----- do_task_stat var = task->real_parent release_task call_rcu(delayed_put_task_struct) task_tgid_nr_ns(var) rcu_read_lock <--- Too late to protect task->real_parent! task_pid_ptr <--- UAF! rcu_read_unlock This patch uses task_ppid_nr_ns() instead of task_tgid_nr_ns() to add proper RCU protection for accessing task->real_parent. | ||||
| CVE-2026-46227 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate list cursor after sctp_sendmsg_to_asoc() in SCTP_SENDALL The SCTP_SENDALL path in sctp_sendmsg() iterates ep->asocs with list_for_each_entry_safe(), which caches the next entry in @tmp before the loop body runs. The body calls sctp_sendmsg_to_asoc(), which may drop the socket lock inside sctp_wait_for_sndbuf(). While the lock is dropped, another thread can SCTP_SOCKOPT_PEELOFF the association cached in @tmp, migrating it to a new endpoint via sctp_sock_migrate() (list_del_init() + list_add_tail() to newep->asocs), and optionally close the new socket which frees the association via kfree_rcu(). The cached @tmp can also be freed by a network ABORT for that association, processed in softirq while the lock is dropped. sctp_wait_for_sndbuf() revalidates @asoc (the current entry) on re-lock via the "sk != asoc->base.sk" and "asoc->base.dead" checks, but nothing revalidates @tmp. After a successful return, the iterator advances to the stale @tmp, yielding either a use-after-free (if the peeled socket was closed) or a list-walk onto the new endpoint's list head (type confusion of &newep->asocs as a struct sctp_association *). Both are reachable from CapEff=0; the type-confusion path gives controlled indirect call via the outqueue.sched->init_sid pointer. Fix by re-deriving @tmp from @asoc after sctp_sendmsg_to_asoc() returns. @asoc is known to still be on ep->asocs at that point: the only callers that list_del an association from ep->asocs are sctp_association_free() (which sets asoc->base.dead) and sctp_assoc_migrate() (which changes asoc->base.sk), and sctp_wait_for_sndbuf() checks both under the lock before any successful return; a tripped check propagates as err < 0 and the loop bails before the re-derive. The SCTP_ABORT path in sctp_sendmsg_check_sflags() returns 0 and the loop hits 'continue' before sctp_sendmsg_to_asoc() is ever called, so the @tmp cached by list_for_each_entry_safe() still covers the lock-held free that ba59fb027307 ("sctp: walk the list of asoc safely") was added for. | ||||
| CVE-2026-46173 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exit: prevent preemption of oopsing TASK_DEAD task When an already-exiting task oopses, make_task_dead() currently calls do_task_dead() with preemption enabled. That is forbidden: do_task_dead() calls __schedule(), which has a comment saying "WARNING: must be called with preemption disabled!". If an oopsing task is preempted in do_task_dead(), between becoming TASK_DEAD and entering the scheduler explicitly, bad things happen: finish_task_switch() assumes that once the scheduler has switched away from a TASK_DEAD task, the task can never run again and its stack is no longer needed; but that assumption apparently doesn't hold if the dead task was preempted (the SM_PREEMPT case). This means that the scheduler ends up repeatedly dropping references on the dead task's stack, which can lead to use-after-free or double-free of the entire task stack; in other words, two tasks can end up running on the same stack, resulting in various kinds of memory corruption. (This does not just affect "recursively oopsing" tasks; it is enough to oops once during task exit, for example in a file_operations::release handler) | ||||
| CVE-2026-46099 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels seg6_input_core() and rpl_input() call ip6_route_input() which sets a NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking dst_hold() unconditionally. On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can release the underlying pcpu_rt between the lookup and the caching through a concurrent FIB lookup on a shared nexthop. Simplified race sequence: ksoftirqd/X higher-prio task (same CPU X) ----------- -------------------------------- seg6_input_core(,skb)/rpl_input(skb) dst_cache_get() -> miss ip6_route_input(skb) -> ip6_pol_route(,skb,flags) [RT6_LOOKUP_F_DST_NOREF in flags] -> FIB lookup resolves fib6_nh [nhid=N route] -> rt6_make_pcpu_route() [creates pcpu_rt, refcount=1] pcpu_rt->sernum = fib6_sernum [fib6_sernum=W] -> cmpxchg(fib6_nh.rt6i_pcpu, NULL, pcpu_rt) [slot was empty, store succeeds] -> skb_dst_set_noref(skb, dst) [dst is pcpu_rt, refcount still 1] rt_genid_bump_ipv6() -> bumps fib6_sernum [fib6_sernum from W to Z] ip6_route_output() -> ip6_pol_route() -> FIB lookup resolves fib6_nh [nhid=N] -> rt6_get_pcpu_route() pcpu_rt->sernum != fib6_sernum [W <> Z, stale] -> prev = xchg(rt6i_pcpu, NULL) -> dst_release(prev) [prev is pcpu_rt, refcount 1->0, dead] dst = skb_dst(skb) [dst is the dead pcpu_rt] dst_cache_set_ip6(dst) -> dst_hold() on dead dst -> WARN / use-after-free For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release the pcpu_rt. Shared nexthop objects provide such a path, as two routes pointing to the same nhid share the same fib6_nh and its rt6i_pcpu entry. Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after ip6_route_input() to force the NOREF dst into a refcounted one before caching. The output path is not affected as ip6_route_output() already returns a refcounted dst. | ||||
| CVE-2026-46065 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an instance as part of initializing deferred I/O and remove it only after the final mapping has been closed. If the fb_info and the contained deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info to invalidate the mapping. Any access will then result in a SIGBUS signal. Fixes a long-standing problem, where a device hot-unplug happens while user space still has an active mapping of the graphics memory. The hot- unplug frees the instance of struct fb_info. Accessing the memory will operate on undefined state. | ||||
| CVE-2026-43370 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix use-after-free race in VM acquire Replace non-atomic vm->process_info assignment with cmpxchg() to prevent race when parent/child processes sharing a drm_file both try to acquire the same VM after fork(). (cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618) | ||||
| CVE-2026-43332 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path. | ||||
| CVE-2026-43303 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: clear page->private in free_pages_prepare() Several subsystems (slub, shmem, ttm, etc.) use page->private but don't clear it before freeing pages. When these pages are later allocated as high-order pages and split via split_page(), tail pages retain stale page->private values. This causes a use-after-free in the swap subsystem. The swap code uses page->private to track swap count continuations, assuming freshly allocated pages have page->private == 0. When stale values are present, swap_count_continued() incorrectly assumes the continuation list is valid and iterates over uninitialized page->lru containing LIST_POISON values, causing a crash: KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107] RIP: 0010:__do_sys_swapoff+0x1151/0x1860 Fix this by clearing page->private in free_pages_prepare(), ensuring all freed pages have clean state regardless of previous use. | ||||
| CVE-2026-43111 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_report_event() iterates over the device->readers list without holding the readers_lock. This allows a concurrent roccat_release() to remove and free a reader while it's still being accessed, leading to a use-after-free. Protect the readers list traversal with the readers_lock mutex. | ||||
| CVE-2026-43074 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: eventpoll: defer struct eventpoll free to RCU grace period In certain situations, ep_free() in eventpoll.c will kfree the epi->ep eventpoll struct while it still being used by another concurrent thread. Defer the kfree() to an RCU callback to prevent UAF. | ||||
| CVE-2026-43063 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't irele after failing to iget in xfs_attri_recover_work xlog_recovery_iget* never set @ip to a valid pointer if they return an error, so this irele will walk off a dangling pointer. Fix that. | ||||