Export limit exceeded: 15869 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15869 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90179 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix deadlock in complain-mode change_hat The use of change_hat when in complain mode can cause a deadlock when the hat doesn't exist and a new learning profile is created for the missing profile. This is because change_hat() has taken the lock to search the hat list and creating the new learning profile needs to take the lock to add it to the list. From the bug report: Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su in complain mode set to change hats. Then verified in newest available vanilla kernel I've compiled to see if still present: 7.2-rc7 vanilla -> affected checked also some other kernels: 6.18.44 vanilla -> affected 6.12.95 with debian patches -> unaffected On systems without bug (for example 6.12.95 debian) it just prints: aa_change_hat rc=0 On systems with bug, the executable always hangs, prints nothing and becomes unkillable. (And once stuck this way, it will cause any further hat changes to also cause the changing process to get stuck) Then in syslog you can find hint about cause: kernel: INFO: task hat:3409 blocked for more than 483 seconds. kernel: Not tainted 7.2.0-rc7 #1 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800 kernel: Call Trace: kernel: <TASK> kernel: __schedule+0x48f/0xfe0 kernel: schedule+0x27/0xa0 kernel: schedule_preempt_disabled+0x15/0x30 kernel: __mutex_lock.constprop.0+0x569/0xa10 kernel: aa_new_learning_profile+0x15f/0x210 kernel: build_change_hat+0x19f/0x3b0 kernel: change_hat.isra.0+0x5dd/0xd60 kernel: aa_change_hat+0x2f3/0x710 kernel: aa_setprocattr_changehat+0x121/0x1f0 kernel: do_setattr+0x28c/0x340 kernel: apparmor_setselfattr+0x20/0x50 kernel: security_setselfattr+0xf6/0x110 kernel: __x64_sys_lsm_set_self_attr+0x53/0x90 kernel: do_syscall_64+0xdd/0x5e0 kernel: ? __mod_memcg_lruvec_state+0xfd/0x260 kernel: ? lruvec_stat_mod_folio+0x8d/0xd0 kernel: ? __folio_mod_stat+0x2d/0x90 kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0 kernel: ? do_anonymous_page+0x184/0xa10 kernel: ? __handle_mm_fault+0x805/0x870 kernel: ? count_memcg_events+0xef/0x230 kernel: ? handle_mm_fault+0x1f0/0x2f0 kernel: ? do_user_addr_fault+0x2bb/0x7b0 kernel: ? do_syscall_64+0x94/0x5e0 kernel: ? exc_page_fault+0x75/0x160 kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e kernel: RIP: 0033:0x7f815e134c8d kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064 kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010 kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064 kernel: </TASK> kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409. To fix the issue, lift the locking out of the core of aa_new_learning_profile(), introduce a wrapper function that takes the lock where needed, and have build_change_hat() call the core function that no longer takes the lock. In addition fix 4 other issues introduced by commit 32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles") - aa_get_profile_rcu() was replaced-by: aa_get_profile without the accompanying rcu_dereference_protected() - an extra aa_get_label(label) was introduced at the start of change_hat() without an accompanying aa_put_label() causing a reference count leak. - a reference count leak was introduced in the label_is_stale(label) case, where the newest profile would be leaked instead of the label passed to the function. - a potential UAF when the lookup walks up the tree with new_ns != ns the new label refere ---truncated--- | ||||
| CVE-2026-90154 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: scope session state changes to bound connections ksmbd_all_conn_set_status() treats every connection whose transient binding flag is set as belonging to the target SessionId. A logoff or session replacement can consequently move an unrelated connection to NEED_RECONNECT or NEED_SETUP. Pass the target session itself and select connections using either the connection-local session xarray or the session's permanent channel list. Use the same association test while waiting for requests to drain. Serialize session-wide status changes under request_lock and do not overwrite EXITING or RELEASING. Protect the shutdown transition with the same lock so a concurrent session update cannot revive a closing connection. | ||||
| CVE-2026-90138 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds the EPROTO error from the earlier failed self-connect. This rejection causes the child socket created for r1's connection to never be freed on virtio or hyperv transports; only the VMCI transport implements pending_work to revisit and clean up a rejected socket. For a non-blocking connect(), vsock_connect() may return -EINPROGRESS immediately, and vsock_connect_timeout() can later set sk->sk_err asynchronously. Since no vsock transport ever sets sk_err on a socket while it is in TCP_LISTEN state, checking it in vsock_accept() serves no purpose and only carries forward errors left behind by earlier, unrelated connection attempts on the same socket. Remove the checks so accept() no longer rejects valid incoming connections because of a stale error, which also avoids the resource leak described above. | ||||
| CVE-2026-90104 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so each referring_call_list starts uninitialized. decode_rc_list() assigns rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero referring calls therefore leaves the pointer uninitialized, and nfs4_callback_sequence() later passes stale slab contents to kfree(). Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is NULL from the beginning, including valid empty referring call lists. | ||||
| CVE-2026-90061 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip double clone set expressions on element insert Both the dynset and newsetelem path clone the existing set expressions when setting set element expressions if no override expressions are provided. This results in a double clone, once to clone the template set expressions then another clone on the new element. Add a flag to annotate if userspace provides a override expression (ie. expression of the same type of the set but different configuration), otherwise borrow the existing expression from the set. Add conditionals to release expression iif they represent an override. Use this new override_exprs flag to dump the dynset expression override to userspace. This simplifies the existing logic and it also fixes a bug with the connlimit expression which results in a module refcount imbalance WARNING splat when resorting on the default set expressions. | ||||
| CVE-2026-90042 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: properly decrypt filenames in vmalloc() buffers The fscrypt subsystem uses the scatterlist crypto API, inheriting its requirement that any buffers are in the linear mapping region. However, the messenger client uses kvmalloc() to create buffers for messages, which will occasionally place those buffers in the vmalloc() region when physical memory fragmentation doesn't permit a large enough kmalloc(). The various callers of ceph_fname_to_usr() directly pass (slices of) raw messages from the MDS without considering that the messages may be in vmalloc() buffers, resulting in oopses especially on non-x86 platforms (see 'Closes:' for more details and a reproducer). Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated fname->ctext, fname->name, and/or oname->name buffers, using `tname` (which, when non-null, must be a linear address; when null, is briefly allocated as necessary) as a bounce buffer to avoid passing any inappropriate addresses to fscrypt_fname_disk_to_usr(). Additionally change parse_reply_info_readdir() -- the only function to supply its own `tname` -- to follow the new "tname must never come from vmalloc()" rule by passing NULL when the message is not in the linear region. Though this causes a per-dentry kmalloc()+kfree(), this overhead exists only when processing the minority of messages that spill into vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir messages. Still, if the overhead proves unreasonable in the future, it is easy enough to mitigate: a future change could allocate a bounce buffer in parse_reply_info_readdir() and use that as `tname` instead. | ||||
| CVE-2026-89995 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-direct: return struct page from dma_direct_alloc_from_pool() Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool helper") changed dma_direct_alloc_from_pool() to return the CPU address from dma_alloc_from_pool(). That fits dma_direct_alloc(), but dma_direct_alloc_pages() also uses the helper and expects a struct page *. Fix this by making dma_direct_alloc_from_pool() return the struct page * again, and pass the CPU address back through an out-parameter for the dma_direct_alloc() caller. | ||||
| CVE-2026-89987 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: transfer the pmd dirty bit to the folio on zap zap_huge_pmd_folio() propagates the pmd young bit to the folio for the file case, but not the dirty bit. The pte path does propagate it, in zap_present_folio_ptes() and so does the pmd split path, in __split_huge_pmd_locked(). For most file mappings the omission is harmless, because writing to a shared file mapping goes through page_mkwrite(), which dirties the folio. tmpfs is different: it has no page_mkwrite(), and vma_wants_writenotify() is false for it, so a *read* fault on a MAP_SHARED tmpfs mapping installs a writable pmd via do_read_fault(). do_read_fault() does not call fault_dirty_shared_page(), so subsequent stores through that mapping set only the hardware dirty bit in the pmd and never call folio_mark_dirty(). A shmem folio allocated by a fault is marked uptodate but not dirty (see the clear: block in shmem_get_folio_gfp()), so PG_dirty is never set at all. Unmapping such a folio - munmap(), or exit_mmap() when the process dies - then loses the only record that it was written, because zap_huge_pmd() drops the pmd without transferring the dirty bit. Reclaim afterwards sees a clean shmem folio: the whole swap-out block in shrink_folio_list() is inside "if (folio_test_dirty(folio))", so pageout() is skipped and the folio falls into __remove_mapping(). There, folio_is_file_lru() is false for a swapbacked folio, so no shadow entry is created and __filemap_remove_folio(folio, NULL) simply empties the i_pages slot. The data is freed without ever being written to swap, and the next fault on that index returns a freshly zeroed folio. This is silent data loss for any process that keeps state in a MAP_SHARED tmpfs segment across an unmap - for example a cache handed from one process generation to the next through /dev/shm. It requires the folio to be PMD-mapped, so it only shows up once shmem THP is enabled (which is what we did in Meta fleet and started noticing crashes); with THP off the pte path transfers the dirty bit correctly. It also only becomes visible when swap is enabled, because with no swap device shmem folios (which are on the anon LRU) are not scanned by reclaim at all, so the clean folio is never dropped. Reproduced on x86_64 with a tmpfs mounted huge=within_size: read-fault a 2MB-backed region, write a known pattern through the resulting mapping, munmap, force reclaim of the cgroup, then re-map and read back. Without this patch the region reads back as zeros and vmstat shows zswpout 0 - the data was discarded rather than swapped. With this patch the region reads back correctly and the pages are swapped out as expected. With huge=never, or when the first touch is a write, the test passes either way. | ||||
| CVE-2026-89962 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/kexec_file: Prevent kexec range truncation Sashiko AI review pointed out the following issue. The __merge_memory_ranges() function incorrectly handles overlapping memory ranges when merging them. Although sort_memory_ranges() sorts all ranges by their start address in ascending order beforehand, the merge logic remains defective in two ways: 1. It compares the current range's start against the previous element (i-1) instead of the running target index (idx) 2. It unconditionally overwrites 'ranges[idx].end' with 'ranges[i].end'. This logic flaw leads to critical memory truncation when a larger memory range completely subsumes subsequent smaller ranges. For example, consider a sorted input array with three ranges: Range A (idx=0): [0x1000 - 0x9000] Range B (i=1): [0x2000 - 0x5000] (completely inside Range A) Range C (i=2): [0x6000 - 0x8000] (completely inside Range A) 1. When i=1 (Range B): ranges[1].start (0x2000) <= ranges[0].end + 1 (0x9001) is TRUE. The code executes: ranges[0].end = ranges[1].end, which erroneously shrinks Range A's end from 0x9000 down to 0x5000. 2. When i=2 (Range C): ranges[2].start (0x6000) <= ranges[1].end + 1 (0x5001) is FALSE. The code falls into the else block, creating a broken new range. As a result, valid memory fragments [0x5001 - 0x5fff] and [0x8001 - 0x9000] are completely lost from the kexec exclude lists, potentially allowing the crash kernel to overwrite active memory, causing data corruption or crashes. Fix this by ensuring the start of the current range is compared against the end of the active merged range (idx), and use max() to safely prevent the outer boundary from being truncated. | ||||
| CVE-2026-89956 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects In order to traverse or add/remove ap_matrix_mdev objects in the matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held. There are two functions that access the list without holding the mutex: vfio_ap_mdev_probe function ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock mutex to guard the add of a newly created ap_matrix_mdev object to the matrix_dev->mdev_list. This mutex does not protect list access; its purpose is to guard against concurrent access to fields contained in an ap_matrix_mdev object. This could lead to kernel memory corruption or use-after-free if another mdev is created or removed concurrently. The adding of an ap_matrix_mdev object to matrix_dev->mdev_list is now guarded by the matrix_dev->guests_lock which is the correct way to protect against concurrent mdev_list access. Also removed the following two lines of code because the matrix_mdev is allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger and cfg_chg_trigger are already zero-initialised when the struct is allocated before the call to vfio_register_emulated_iommu_dev. This prevents a window whereby these triggers are set to NULL after the device is exposed to userspace. matrix_mdev->req_trigger = NULL; matrix_mdev->cfg_chg_trigger = NULL; vfio_ap_mdev_for_queue function ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The status_show function that supports display of the status attribute of the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue function which iterates the matrix_dev->mdev_list to find the object representing the queue device whose status is to be displayed. In order to traverse this list, the matrix_dev->guests_lock mutex must be held. To fix this, the guests_lock mutex is taken prior to taking the matrix_dev->mdevs_lock mutex in the status_show function. It is taken there rather than the vfio_ap_mdev_for_queue function - where it is needed - because it must be taken prior to the mdevs_lock mutex in order to adhere to the proper locking order and prevent a lockdep splat; also because the mdevs_lock is needed there to access fields within the matrix_mdev object in that function. See the vfio-ap-locking.rst in the linux kernel tree. | ||||
| CVE-2026-89934 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: ltrf216a: fix runtime PM reference leak in error path ltrf216a_get_lux() acquires a runtime PM reference by calling ltrf216a_set_power_state(data, true). However, if ltrf216a_read_data() fails, the function returns immediately without dropping the reference. This leaves the runtime PM usage count unbalanced, preventing the device from autosuspending after a failed read. Fix this by releasing the runtime PM reference before returning from the error path. | ||||
| CVE-2026-89833 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential deadloop in f2fs_fsync_node_pages() There is potential deadloop in race condition: Thread A Thread B - fsync - f2fs_do_sync_file - f2fs_fsync_node_pages - last_fsync_dnode - folio_get(last_folio) - f2fs_setattr - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_truncate_inode_blocks - truncate_dnode - truncate_node - invalidate_mapping_pages - folio->mapping = NULL - is_node_folio alwasy return false - atomic && !marked is always true, then goto retry | ||||
| CVE-2026-89832 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty flag on folio in error path If node block is corrupted due to chksum mismatch or inconsistent footer info, it needs to drop clear flag of node folio, in order to persist inconsistent node data to storage. | ||||
| CVE-2026-89827 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid force-completing uninitialized UVD rings uvd_v7_0_sw_init() does not initialize the UVD decode ring for an SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes the decode ring when restoring its fence sequence. Skip fence completion when the fence driver is not initialized. | ||||
| CVE-2026-89812 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: force complete the MES ring fences on reset The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1 reset, while fence_drv.sync_seq keeps advancing for every packet. When the reset is triggered because MES itself stopped responding, the timed-out packets advance sync_seq past the last hw fence value MES wrote. After resume the first MES submission polls forever on a seq that is never written back, failing the resume and wedging the box on a second reset: amdgpu: MES ring buffer is full. amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110) amdgpu: resume of IP block <gfx_v11_0> failed -110 amdgpu: GPU reset end with ret = -110 Force complete the MES scheduler ring fences together with the scheduler rings so their hw fence is realigned to sync_seq. v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. | ||||
| CVE-2026-80616 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns() It's pointless to call WARN_ON() in case of an allocation failure in dev_change_net_namespace() and device_rename(), since it only leads to useless splats caused by deliberate fault injections, so avoid it. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-80607 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg Sashiko found that user can cause this WARN_ON_ONCE() easily with adding a kprobe event based on a raw address with BTF parameter. Since this is not an unexpected condition, remove the WARN_ON_ONCE(). | ||||
| CVE-2026-91489 | 1 Oracle | 1 Identity Manager Connector | 2026-10-21 | 7.1 High |
| Vulnerability in the Oracle Identity Manager Connector product of Oracle Fusion Middleware (component: LDAP Gateway). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.1.0. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Identity Manager Connector executes to compromise Oracle Identity Manager Connector. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Identity Manager Connector accessible data as well as unauthorized access to critical data or complete access to all Oracle Identity Manager Connector accessible data. CVSS 3.1 Base Score 7.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). | ||||
| CVE-2026-91527 | 1 Oracle | 1 Zfs Storage Appliance Kit | 2026-10-21 | 8.8 High |
| Vulnerability in the Oracle ZFS Storage Appliance Kit product of Oracle Systems (component: Core). The supported version that is affected is 8.8. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle ZFS Storage Appliance Kit. Successful attacks of this vulnerability can result in takeover of Oracle ZFS Storage Appliance Kit. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-72363 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio state after ENOMEM whilst under writeback iteration Fix the state of the current folio when ENOMEM occurs during writeback iteration. The folio needs to be redirtied and unlocked before the terminal writeback_iter() is invoked. | ||||