Export limit exceeded: 10374 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 11583 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11583 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90301 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: o2hb: quiesce negotiate handlers and timeout work Heartbeat regions publish struct o2hb_region as the private data for the NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item() creates the configfs region. The approve handler can call o2hb_arm_timeout(), so a peer can touch the region timeout work before dev_store() has finished building the heartbeat runtime, or after teardown has started to shut that runtime back down. The final configfs put also has to keep reg alive until the last in-flight o2net callback drops its handler reference. o2net_unregister_handler_list() blocks future handler lookups, but it does not wait for sc_rx_work that already passed o2net_handler_get(). That drain needs to cover local listener teardown as well, where the o2net ordered workqueue may already be inside destroy_workqueue(). Fix the lifetime rule in both directions. Initialize the region delayed works before publishing reg through the o2net handler table, keep new or stopping regions non-armable with hr_stopping, and quiesce both delayed works on failed-start and teardown paths even when no heartbeat thread is left to call o2hb_disarm_timeout(). Then unregister handlers before tearing down handler-visible region state and make the drain wait for the active or destroying o2net ordered workqueue before release frees reg. The buggy scenario involves two paths, with each column showing the order within that path: region lifecycle: late negotiate callback: 1. make_item() registers the 1. o2net_process_message() gets a region handlers before heartbeat handler for reg. dev_store() has built a 2. The callback runs after the lookup runnable heartbeat context. lock is dropped and dereferences reg. 2. A failed start or rmdir 3. An approve or timeout path tries to stops the heartbeat thread, queue reg's delayed work, or release quiesces existing work, and races the callback body after handler drops the final configfs ref. unregister. 3. region_release() must drain 4. The callback or delayed work can handler-visible o2net rx work outlive reg unless lifecycle code before freeing reg. keeps the region non-armable and drains the active-or-destroying o2net workqueue. Validation reproduced this kernel report: KASAN slab-use-after-free in __run_timers+0x22c/0x5b0 Write of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 __run_timers+0x22c/0x5b0 kasan_report+0xe0/0x110 _raw_spin_unlock_irqrestore+0x27/0x60 try_to_wake_up+0x191/0xf70 timer_expire_remote+0xae/0xf0 run_timer_softirq+0x19b/0x1a0 handle_softirqs+0x156/0x660 __irq_exit_rcu+0xc4/0x160 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x6c/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 o2hb_heartbeat_group_make_item+0x3c/0x600 | ||||
| CVE-2026-90291 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: module/dups: Fix use-after-free in kmod_dup_req lifetime handling The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed only after it is no longer referenced. When releasing an instance, the kmod_dup_request_delete() function removes the kmod_dup_req from the dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it. However, this doesn't work correctly because parallel users referencing the instance in kmod_dup_request_exists_wait() don't enter an RCU read-side critical section. This can result in a use-after-free. The kmod_dup_request_exists_wait() function may need to hold a valid reference to a kmod_dup_req instance across a blocking wait until the corresponding modprobe command completes. This makes it unsuitable for RCU. Fix the issue by changing the lifecycle management of kmod_dup_req to use reference counting. | ||||
| CVE-2026-90260 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't clobber the extent buffer when zeroing it out On a zoned filesystem a freed-but-still-dirty tree block is written out as zeros (EXTENT_BUFFER_ZONED_ZEROOUT) only to keep the zone write pointer advancing. btree_csum_one_bio() implemented this by memzeroing the extent buffer's own folios before submission. That destroys the in-memory buffer while it may still be referenced. In particular btrfs_free_tree_block() can run on it afterwards and reads the header to add a delayed reference; once the header has been zeroed it frees bytenr 0 and corrupts the extent tree (the btrfs_header_bytenr(buf) != 0 ASSERT in btrfs_free_tree_block(), or an "unable to find ref" abort). It is flaky and reproduces under fsstress, e.g. generic/461 and generic/013. Write the zeros to disk from the shared zero page instead and leave the extent buffer content untouched, so any later reference - including the delayed reference from btrfs_free_tree_block() - still sees a valid header. end_bbio_meta_write() now clears writeback on the buffer's own folios, as the bio no longer carries them. | ||||
| CVE-2026-90256 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use proto_lock for l2cap_data to fix l2cap_disconn_ind hci_conn::l2cap_data is accessed without locks in l2cap_disconn_ind via hci_conn_timeout (disc_work) -> hci_proto_disconn_ind -> l2cap_disconn_ind. This is UAF if the l2cap_conn is deleted concurrently. disc_work is disabled sync in hci_conn_del(), so we cannot take hci_dev_lock in disc_work. Fix by using proto_lock to guard l2cap_data, in addition to hdev->lock which is held in other access paths. | ||||
| CVE-2026-90240 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush context cache with correct SID when tearing down aliases domain_context_clear_one() and device_pasid_table_teardown() are both invoked once per DMA alias of a device. Each function locates the context entry using the bus/devfn pair provided by the pci_for_each_dma_alias() callback, then calls intel_context_flush_no_pasid(), which constructs a device-selective context-cache invalidation from info->bus and info->devfn (that is, always the requester ID of the device itself). As a result, for every alias other than the device’s own RID, the context entry that was just cleared in memory is never invalidated in the context cache. Hardware may continue using that stale cached entry. In the scalable-mode teardown path, intel_pasid_free_table() can then free the PASID directory still referenced by that stale entry, allowing the IOMMU to walk freed memory. Fix this by passing the source ID of the entry being torn down to intel_context_flush_no_pasid(), instead of deriving it from @info. | ||||
| CVE-2026-90232 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: amt: Don't support cross-netns setup. When a lower device is unregistered, amt_device_event() tries to unregister its upper AMT device, but it has two problems. 1. amt_lookup_upper_dev() looks up an upper device in the lower device's netns only 2. amt_device_event() unregisters a single upper device only If AMT device is created on a lower device in another netns, removing the lower device triggers the splat below and gets stuck until all upper devices are removed. [0] The cross-netns setup seems unintentional considering 1. and the following points: * amt_link_setup() sets dev->netns_immutable to true * skb_scrub_packet() is not called in the fast path * iproute2 binary fails to find cross-netns lower device via link-netns: # ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1 Cannot find device "veth1" Instead of supporting it properly and preparing for per-netns netdev unreg, let's forbid cross-netns setup. Note that the problem 2. needs a separate fix. [0]: WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031 Modules linked in: CPU: 48 UID: 0 PID: 2031 Comm: ip Not tainted 7.2.0-rc5+ #27 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:unregister_netdevice_many_notify (net/core/dev.c:12518) Code: 89 ef e8 d5 52 ae fe e9 d0 f4 ff ff 48 8d 3d f9 3b 9c 02 48 c7 c6 c0 0b 63 84 ba ab 1f 00 00 67 48 0f b9 3a e9 65 ff ff ff 90 <0f> 0b 90 eb 81 48 8d 3d f6 3b 9c 02 48 c7 c6 c0 0b 63 84 ba e2 1f RSP: 0018:ffffc90004abf160 EFLAGS: 00010212 RAX: ffff888104d38260 RBX: ffff88800b0911b8 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff85b9f880 RBP: ffffc90004abf2d0 R08: ffffffff85b9f887 R09: 1ffffffff0b73f10 R10: dffffc0000000000 R11: fffffbfff0b73f11 R12: ffff88800b091d08 R13: ffff88800b091178 R14: dffffc0000000000 R15: ffff88800b091000 FS: 00007f555b86c600(0000) GS:ffff8881942a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562107d489c0 CR3: 0000000109a40002 CR4: 0000000000372ef0 Call Trace: <TASK> rtnl_dellink (net/core/rtnetlink.c:3632 net/core/rtnetlink.c:3674) rtnetlink_rcv_msg (net/core/rtnetlink.c:7112) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1319) netlink_sendmsg (net/netlink/af_netlink.c:1900) ____sys_sendmsg (net/socket.c:775) __sys_sendmsg (net/socket.c:2738) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) ... unregister_netdevice: waiting for veth0 to become free. Usage count = 7 ref_tracker: netdev@ffff88800d7496d8 has 3/3 users at __netdev_adjacent_dev_insert (./include/linux/netdevice.h:4525 ./include/linux/netdevice.h:4554 net/core/dev.c:8791) __netdev_upper_dev_link (net/core/dev.c:8879 net/core/dev.c:8963) netdev_upper_dev_link (net/core/dev.c:9009) amt_newlink (drivers/net/amt.c:3321) | ||||
| CVE-2026-90204 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate DIO orphan slot during inode read [BUG] A corrupted append-DIO dinode (high byte at offset 0xa1 corrupted from 0 to 1) can carry an i_dio_orphaned_slot outside the mounted filesystem slot range and trigger a use-after-free error: BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline] ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295 evict+0x38e/0x8f0 fs/inode.c:810 iput_final fs/inode.c:1914 [inline] iput fs/inode.c:1966 [inline] iput+0x55b/0x8b0 fs/inode.c:1926 ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374 ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373 ... [CAUSE] ocfs2_del_inode_from_orphan() uses i_dio_orphaned_slot to index the slot-local system inode cache. The dinode validator does not check this active slot, so an out-of-range value produces an invalid cache entry pointer that is dereferenced as an inode pointer. [FIX] Reject an active i_dio_orphaned_slot outside the slot range during dinode validation, before DIO orphan recovery can consume it. | ||||
| CVE-2026-90179 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix deadlock in complain-mode change_hat The use of change_hat when in complain mode can cause a deadlock when the hat doesn't exist and a new learning profile is created for the missing profile. This is because change_hat() has taken the lock to search the hat list and creating the new learning profile needs to take the lock to add it to the list. From the bug report: Originally found in 7.0.0 in LTS ubuntu 26.04 with pam_apparmor + su in complain mode set to change hats. Then verified in newest available vanilla kernel I've compiled to see if still present: 7.2-rc7 vanilla -> affected checked also some other kernels: 6.18.44 vanilla -> affected 6.12.95 with debian patches -> unaffected On systems without bug (for example 6.12.95 debian) it just prints: aa_change_hat rc=0 On systems with bug, the executable always hangs, prints nothing and becomes unkillable. (And once stuck this way, it will cause any further hat changes to also cause the changing process to get stuck) Then in syslog you can find hint about cause: kernel: INFO: task hat:3409 blocked for more than 483 seconds. kernel: Not tainted 7.2.0-rc7 #1 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: task:hat state:D stack:0 pid:3409 tgid:3409 ppid:2605 task_flags:0x400000 flags:0x00080800 kernel: Call Trace: kernel: <TASK> kernel: __schedule+0x48f/0xfe0 kernel: schedule+0x27/0xa0 kernel: schedule_preempt_disabled+0x15/0x30 kernel: __mutex_lock.constprop.0+0x569/0xa10 kernel: aa_new_learning_profile+0x15f/0x210 kernel: build_change_hat+0x19f/0x3b0 kernel: change_hat.isra.0+0x5dd/0xd60 kernel: aa_change_hat+0x2f3/0x710 kernel: aa_setprocattr_changehat+0x121/0x1f0 kernel: do_setattr+0x28c/0x340 kernel: apparmor_setselfattr+0x20/0x50 kernel: security_setselfattr+0xf6/0x110 kernel: __x64_sys_lsm_set_self_attr+0x53/0x90 kernel: do_syscall_64+0xdd/0x5e0 kernel: ? __mod_memcg_lruvec_state+0xfd/0x260 kernel: ? lruvec_stat_mod_folio+0x8d/0xd0 kernel: ? __folio_mod_stat+0x2d/0x90 kernel: ? map_anon_folio_pte_nopf+0xd1/0x1f0 kernel: ? do_anonymous_page+0x184/0xa10 kernel: ? __handle_mm_fault+0x805/0x870 kernel: ? count_memcg_events+0xef/0x230 kernel: ? handle_mm_fault+0x1f0/0x2f0 kernel: ? do_user_addr_fault+0x2bb/0x7b0 kernel: ? do_syscall_64+0x94/0x5e0 kernel: ? exc_page_fault+0x75/0x160 kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e kernel: RIP: 0033:0x7f815e134c8d kernel: RSP: 002b:00007fff6df94ea8 EFLAGS: 00000246 ORIG_RAX: 00000000000001cc kernel: RAX: ffffffffffffffda RBX: 0000556d8c81d040 RCX: 00007f815e134c8d kernel: RDX: 0000000000000046 RSI: 0000556d8c81d040 RDI: 0000000000000064 kernel: RBP: 00007fff6df94ef0 R08: 00007f815e212ac8 R09: 000000000000000c kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000556d8c81d010 kernel: R13: 0000000000000026 R14: 0000000000000046 R15: 0000000000000064 kernel: </TASK> kernel: INFO: task hat:3409 is blocked on a mutex likely owned by task hat:3409. To fix the issue, lift the locking out of the core of aa_new_learning_profile(), introduce a wrapper function that takes the lock where needed, and have build_change_hat() call the core function that no longer takes the lock. In addition fix 4 other issues introduced by commit 32e92764d6f8d ("apparmor: grab ns lock and refresh when looking up changehat child profiles") - aa_get_profile_rcu() was replaced-by: aa_get_profile without the accompanying rcu_dereference_protected() - an extra aa_get_label(label) was introduced at the start of change_hat() without an accompanying aa_put_label() causing a reference count leak. - a reference count leak was introduced in the label_is_stale(label) case, where the newest profile would be leaked instead of the label passed to the function. - a potential UAF when the lookup walks up the tree with new_ns != ns the new label refere ---truncated--- | ||||
| CVE-2026-90162 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: defer publishing granted locks to prevent UAF/double-free race In smb2_lock(), mid-batch granted locks are published to connection-wide (conn->lock_list) and file-wide (fp->lock_list) lists immediately upon vfs_lock_file() success, while also remaining tracked on the stack-local rollback_list. If a subsequent element in the same SMB2_LOCK request array fails validation or execution, the thread jumps to out: and walks rollback_list to undo previously granted locks. However, because the granted lock was already published to conn->lock_list, a concurrent UNLOCK request on the same connection can find the lock object and kfree() it before the rollback loop executes. When the granting thread subsequently walks rollback_list, it dereferences and frees the already-freed ksmbd_lock structure, resulting in a Use-After-Free and Double-Free (on both ksmbd_lock and struct file_lock). Fix this by deferring the publication of granted locks to conn->lock_list and fp->lock_list until after the entire array of lock elements has been processed without error. Mid-batch grants remain tracked exclusively on the request-local rollback_list until the whole batch succeeds, eliminating the race window. | ||||
| CVE-2026-90156 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper. | ||||
| CVE-2026-90155 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: detach blocked lock requests before freeing A file_lock retained by ksmbd for byte-range lock bookkeeping can still be part of the VFS blocked-request graph. In particular, the VFS can chain a new waiter below an already blocked request through flc_blocked_requests. The ksmbd_file reference count does not cover that graph. Both __ksmbd_close_fd() and the cross-request unlock path free these retained file_lock objects directly. If a dependent waiter is still attached, locks_release_private() hits BUG_ON(!list_empty(&flc->flc_blocked_requests)). The same lifetime mismatch can leave a freed ksmbd_lock reachable through its request-local llist. Detach the file_lock from the blocked-request graph before freeing it in the close, cross-request unlock, and rollback paths. locks_delete_block() also wakes requests chained below the object. Remove llist when a completed lock is published so a globally visible ksmbd_lock no longer points into the submitting worker's stack. | ||||
| CVE-2026-90135 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path. | ||||
| CVE-2026-90116 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being torn down. It can also rearm the timer after timer_delete() has returned. Call timer_shutdown_sync() without holding chip->spinlock. This waits for any running callback to finish and prevents further rearming before the card-private mtpav state is released. | ||||
| CVE-2026-90111 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6mr: do not clone dst in ip6mr_cache_report() IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU. When an ingress multicast packet misses MFC lookup, ip6mr_cache_unresolved() places the skb onto the unresolved queue, escaping the receive-side RCU grace period. If the underlying route is deleted and freed, and the MFC queue is later resolved with a wrong parent interface, ip6_mr_forward() invokes ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab use-after-free. Report packets queued to mroute6_sk (a raw socket) and netlink notifications do not require an attached dst entry. Fix this by: 1. Removing dst_clone() in ip6mr_cache_report() and ensuring report skbs do not hold a dst. 2. Dropping skb_dst before queuing unresolved skbs in ip6mr_cache_unresolved(), matching the fact that multicast forwarding resolves outgoing routes anew via ip6_route_output(). | ||||
| CVE-2026-90093 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: access chan->conn safely in get/setsockopt Since commit b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") l2cap_chan::conn has held reference and remains non-NULL also after the corresponding hci_conn is deleted. In this state accessing various fields eg. hci_conn::hdev is invalid, which leads to KASAN crash in l2cap_sock_setsockopt() access of conn->hcon->hdev. Check l2cap_chan::conn.hcon corresponds to an alive hci_conn before trying to use it in l2cap_sock.c. Hold l2cap_chan_lock() in getsockopt/setsockopt to ensure it stays alive, and to avoid data races in l2cap_chan fields. | ||||
| CVE-2026-90045 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: ffs: fix mm lifetime handling io_data stores a pointer to the submitting task's mm_struct, but does not currently hold a reference to it while async requests are pending. This can result in a use-after-free if the task exits before completion handling finishes. Take a reference with mmgrab() when queuing the read request and release it with mmdrop() on request completion. | ||||
| CVE-2026-90044 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix Use-After-Free in AIO error path In ffs_epfile_write_iter() and ffs_epfile_read_iter(), when ffs_epfile_io() fails with an error other than -EIOCBQUEUED, the io_data structure (`p`) is freed. However, for AIO operations, the kiocb cancel function was already armed and kiocb->private was set to `p`. If a concurrent cancel operation (such as sys_io_cancel()) executes after ffs_epfile_io() fails but before the function frees `p`, a Use-After-Free can occur when the cancellation handler accesses the freed pointer. To securely fix this race condition, we must properly un-arm the cancellation. Invoking `kiocb->ki_complete()` does exactly this by acquiring `ctx->ctx_lock` and safely removing the kiocb from the active sequence. In doing so, it ensures that a parallel io_cancel can no longer discover the kiocb, effectively closing the race window. We then return -EIOCBQUEUED to notify the VFS layer that the kiocb has been consumed and it should avoid attempting to complete the request again or triggering subsequent completion handlers. | ||||
| CVE-2026-90041 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: sony: clean up device list on probe failure sony_input_configured() adds some controllers to sony_device_list before HID core registers their input devices. input_register_device() can fail after the callback returns successfully. sony_probe() then observes that HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware. The devres-managed sony_sc is freed while its list node remains linked, so the next matching controller traverses freed memory. Initialize the list node and device ID to inactive states. Make list removal idempotent and run the driver-private cleanup on every probe failure path. This also makes a second cleanup safe when sony_input_configured() already unwound a partial initialization before sony_probe() handles the missing input claim. Found by 0sec (https://0sec.ai) using automated source analysis; verified against the HID input registration and probe unwind paths. | ||||
| CVE-2026-90037 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during close_lru reaping An nfs4_openowner left on nn->close_lru after its final CLOSE keeps its last closed stateid in oo_last_closed_stid, holding only a raw pointer to its nfs4_client. The laundromat reaps timed-out entries, drops nn->client_lock, and calls nfs4_put_stid(), which dereferences the client through cl_lock. Nothing pins the client across that window, so a concurrent force_expire_client() can free it and nfs4_put_stid() reads freed memory. __destroy_client() hits the same race, walking clp->cl_openowners without cl_lock. Pin the client with cl_rpc_users before dropping client_lock, and skip clients already expiring. __destroy_client() then cleans up its own close_lru entries through release_last_closed_stateid(), so teardown no longer races the laundromat. | ||||
| CVE-2026-90030 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations. | ||||