Export limit exceeded: 11230 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 11588 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11588 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90135 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path. | ||||
| CVE-2026-90116 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being torn down. It can also rearm the timer after timer_delete() has returned. Call timer_shutdown_sync() without holding chip->spinlock. This waits for any running callback to finish and prevents further rearming before the card-private mtpav state is released. | ||||
| CVE-2026-90111 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6mr: do not clone dst in ip6mr_cache_report() IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU. When an ingress multicast packet misses MFC lookup, ip6mr_cache_unresolved() places the skb onto the unresolved queue, escaping the receive-side RCU grace period. If the underlying route is deleted and freed, and the MFC queue is later resolved with a wrong parent interface, ip6_mr_forward() invokes ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab use-after-free. Report packets queued to mroute6_sk (a raw socket) and netlink notifications do not require an attached dst entry. Fix this by: 1. Removing dst_clone() in ip6mr_cache_report() and ensuring report skbs do not hold a dst. 2. Dropping skb_dst before queuing unresolved skbs in ip6mr_cache_unresolved(), matching the fact that multicast forwarding resolves outgoing routes anew via ip6_route_output(). | ||||
| CVE-2026-90093 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: access chan->conn safely in get/setsockopt Since commit b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") l2cap_chan::conn has held reference and remains non-NULL also after the corresponding hci_conn is deleted. In this state accessing various fields eg. hci_conn::hdev is invalid, which leads to KASAN crash in l2cap_sock_setsockopt() access of conn->hcon->hdev. Check l2cap_chan::conn.hcon corresponds to an alive hci_conn before trying to use it in l2cap_sock.c. Hold l2cap_chan_lock() in getsockopt/setsockopt to ensure it stays alive, and to avoid data races in l2cap_chan fields. | ||||
| CVE-2026-90045 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: ffs: fix mm lifetime handling io_data stores a pointer to the submitting task's mm_struct, but does not currently hold a reference to it while async requests are pending. This can result in a use-after-free if the task exits before completion handling finishes. Take a reference with mmgrab() when queuing the read request and release it with mmdrop() on request completion. | ||||
| CVE-2026-90044 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix Use-After-Free in AIO error path In ffs_epfile_write_iter() and ffs_epfile_read_iter(), when ffs_epfile_io() fails with an error other than -EIOCBQUEUED, the io_data structure (`p`) is freed. However, for AIO operations, the kiocb cancel function was already armed and kiocb->private was set to `p`. If a concurrent cancel operation (such as sys_io_cancel()) executes after ffs_epfile_io() fails but before the function frees `p`, a Use-After-Free can occur when the cancellation handler accesses the freed pointer. To securely fix this race condition, we must properly un-arm the cancellation. Invoking `kiocb->ki_complete()` does exactly this by acquiring `ctx->ctx_lock` and safely removing the kiocb from the active sequence. In doing so, it ensures that a parallel io_cancel can no longer discover the kiocb, effectively closing the race window. We then return -EIOCBQUEUED to notify the VFS layer that the kiocb has been consumed and it should avoid attempting to complete the request again or triggering subsequent completion handlers. | ||||
| CVE-2026-90041 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: sony: clean up device list on probe failure sony_input_configured() adds some controllers to sony_device_list before HID core registers their input devices. input_register_device() can fail after the callback returns successfully. sony_probe() then observes that HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware. The devres-managed sony_sc is freed while its list node remains linked, so the next matching controller traverses freed memory. Initialize the list node and device ID to inactive states. Make list removal idempotent and run the driver-private cleanup on every probe failure path. This also makes a second cleanup safe when sony_input_configured() already unwound a partial initialization before sony_probe() handles the missing input claim. Found by 0sec (https://0sec.ai) using automated source analysis; verified against the HID input registration and probe unwind paths. | ||||
| CVE-2026-90037 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during close_lru reaping An nfs4_openowner left on nn->close_lru after its final CLOSE keeps its last closed stateid in oo_last_closed_stid, holding only a raw pointer to its nfs4_client. The laundromat reaps timed-out entries, drops nn->client_lock, and calls nfs4_put_stid(), which dereferences the client through cl_lock. Nothing pins the client across that window, so a concurrent force_expire_client() can free it and nfs4_put_stid() reads freed memory. __destroy_client() hits the same race, walking clp->cl_openowners without cl_lock. Pin the client with cl_rpc_users before dropping client_lock, and skip clients already expiring. __destroy_client() then cleans up its own close_lru entries through release_last_closed_stateid(), so teardown no longer races the laundromat. | ||||
| CVE-2026-90030 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations. | ||||
| CVE-2026-90029 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: storage: realtek_cr: fix use-after-free on disconnect realtek_cr_destructor() calls timer_delete() before the chip containing the timer is freed. The timer callback may still be running and can rearm itself, resulting in a use-after-free. Use timer_shutdown_sync() to wait for the callback and prevent further rearming. Do this unconditionally because ss_en may be changed after the timer is armed. Move timer_setup() into init_realtek_cr() so the timer is initialized before any failure path can invoke the destructor. Found by static analysis. | ||||
| CVE-2026-90002 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Take trace_array reference before accessing its ftrace_ops The trace instance files set_ftrace_filter and set_ftrace_notrace was updated to work with specific trace instances (trace_arrays). The issue is that when these files are opened, there is a small race window where it will use the ftrace_ops from the inode->private pointer to get a reference to the trace_array and then take its reference. The problem is that the ftrace_ops itself could be freed. If the rmdir on the instance happens at the same time the set_ftrace_filter file is opened, the rmdir could have also freed the ftrace_ops and referencing it will cause a use-after-free bug and crash the kernel. Instead, pass in the trace_array as the file private data (NULL for the top level instance), and then pass both the trace_array and the ftrace_ops to the ftrace_regex_open() function. If the trace_array is NULL, then it just uses the ftrace_ops without the need to take its reference (like normal). If the ftrace_ops is NULL, that is only the case for the top level instance and the global_ops can be used. This allows the trace_array to have its reference incremented before touching the ftrace_ops that could also be freed when the instance is. | ||||
| CVE-2026-89972 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvme: add missing SRCU grace period in error path nvme_alloc_ns() error path at out_unlink_ns removes ns from the namespace head siblings list with list_del_rcu(&ns->siblings) but does not wait for SRCU readers before freeing the namespace struct. Multipath code iterates the head->list under srcu_read_lock() in nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent reader can still hold a reference to ns when kfree(ns) runs. The normal removal path in nvme_ns_remove() correctly calls synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for in-progress readers. Add the same grace period in the error path. | ||||
| CVE-2026-89956 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects In order to traverse or add/remove ap_matrix_mdev objects in the matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held. There are two functions that access the list without holding the mutex: vfio_ap_mdev_probe function ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock mutex to guard the add of a newly created ap_matrix_mdev object to the matrix_dev->mdev_list. This mutex does not protect list access; its purpose is to guard against concurrent access to fields contained in an ap_matrix_mdev object. This could lead to kernel memory corruption or use-after-free if another mdev is created or removed concurrently. The adding of an ap_matrix_mdev object to matrix_dev->mdev_list is now guarded by the matrix_dev->guests_lock which is the correct way to protect against concurrent mdev_list access. Also removed the following two lines of code because the matrix_mdev is allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger and cfg_chg_trigger are already zero-initialised when the struct is allocated before the call to vfio_register_emulated_iommu_dev. This prevents a window whereby these triggers are set to NULL after the device is exposed to userspace. matrix_mdev->req_trigger = NULL; matrix_mdev->cfg_chg_trigger = NULL; vfio_ap_mdev_for_queue function ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The status_show function that supports display of the status attribute of the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue function which iterates the matrix_dev->mdev_list to find the object representing the queue device whose status is to be displayed. In order to traverse this list, the matrix_dev->guests_lock mutex must be held. To fix this, the guests_lock mutex is taken prior to taking the matrix_dev->mdevs_lock mutex in the status_show function. It is taken there rather than the vfio_ap_mdev_for_queue function - where it is needed - because it must be taken prior to the mdevs_lock mutex in order to adhere to the proper locking order and prevent a lockdep splat; also because the mdevs_lock is needed there to access fields within the matrix_mdev object in that function. See the vfio-ap-locking.rst in the linux kernel tree. | ||||
| CVE-2026-89913 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each() and dereferences the returned struct vgic_irq in the loop body without holding a reference on the LPI. The xarray iterator only provides temporary RCU coverage while looking up the current entry. That is not sufficient for this loop body, which reads fields from struct vgic_irq and performs guest memory accesses before the iteration completes. A concurrent path can trigger this race: the irqfd cached injection path (vgic_its_inject_cached_translation) obtains a transient LPI reference via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex, config_lock, or its_lock. If guest ITS DISCARD then drops the cache and ITE references under its_lock, the transient inject reference may become the final one. When vgic_put_irq() drops it, the LPI is erased from lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables() may still hold a stale pointer obtained from the xarray iterator and dereference it after the RCU grace period completes. Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes a stable reference, and dropping it with vgic_put_irq() on all paths. This matches the pattern already used by other lpi_xa iterators in the vgic ITS code. | ||||
| CVE-2026-89811 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add TLB flush after MES queue eviction/suspension MES (Micro Engine Scheduler) does not perform heavy-weight TLB invalidation after unmapping queues, unlike HWS which does this automatically. This causes a race condition where in-flight DMA descriptors can access memory that has been unmapped, leading to page faults and GPU queue hangs during SVM page migration. The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU compute queue hangs with packets submitted but never consumed. Add kfd_flush_tlb() calls after MES queue removal in two locations: - evict_process_queues_cpsch(): after all queues removed during eviction - suspend_queues(): after debug/criu queue suspension (with mem_fence barrier) This ensures all in-flight memory accesses from unmapped queues are flushed before memory is freed or migrated. (cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) | ||||
| CVE-2026-89810 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix error path at svm_migrate_copy_to_ram If page migration from device to sys ram fails for some reasons driver needs release and unlock allocated system pages. To do that driver should use page physical address, or pfn, then get struct page*. Current driver uses dma address(for adev) that is not correct with IOMMU enabled, or even in general. The patch releases and unlocks allocated system pages based on where migration failed by struct page* of sys ram pages. Also dma_unmap correspodent system ram pages at error path. | ||||
| CVE-2026-89803 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: unsubscribe the channel-kill event before the fence context nouveau_channel_del() tears the fence context down first and only drops the channel-kill subscription later, in the middle of the nvif object teardown: if (chan->fence) nouveau_fence(chan->cli->drm)->context_del(chan); ... nvif_object_dtor(&chan->vram); nvif_event_dtor(&chan->kill); The subscribed handler is nouveau_channel_killed(), which calls nouveau_channel_kill() and from there nouveau_fence_context_kill() on chan->fence. A kill event delivered in that window takes fctx->lock and walks fctx->pending on a fence context that context_del() has already freed. Nothing reaches this below Fermi today, because the subscription is gated on FERMI_CHANNEL_GPFIFO and nothing kills a channel there. On Fermi and newer the window is real but narrow, since a kill has to land exactly while the channel is being destroyed. That is reason enough on its own, which is why this carries a Fixes: tag. The last patch in this series subscribes Tesla channels as well; nothing kills those today, so it does not widen the exposure now, but it is the groundwork for a recovery path that would, and the ordering is better fixed before that lands than alongside it. Drop the subscription before anything it depends on is torn down. | ||||
| CVE-2026-89788 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix tree connection use-after-free in smb2_tree_connect() ksmbd_tree_conn_connect() publishes a new tree connection in sess->tree_conns with a single reference and returns its pointer to smb2_tree_connect(). The handler continues to initialize the object and build the response after publication. A concurrent session logoff can erase the connection and drop that reference, freeing the object while the handler still uses it. BUG: KASAN: slab-use-after-free in smb2_tree_connect+0xe3d/0xf90 smb2_tree_connect (fs/smb/server/smb2pdu.c:2872) handle_ksmbd_work process_one_work worker_thread kthread After xa_store() succeeds, take a second reference before releasing tree_conns_lock. The original reference belongs to the xarray entry and the second belongs to the creating smb2_tree_connect() handler. Keep the references balanced in every path: - On normal exit or an error after publication, smb2_tree_connect() drops its creator reference. Error cleanup also calls ksmbd_tree_conn_disconnect(), which drops the xarray reference only if it removes the exact entry. - SMB2 TREE_DISCONNECT uses the same helper to remove the entry and drop its xarray reference. The request's existing lookup reference remains owned by the request and is released by the existing cleanup. - Session LOGOFF removes each entry and drops its xarray reference. If it wins the race, later cleanup sees that the entry is gone and does not drop that reference again. To enforce this ownership, claim the disconnected state and erase the exact entry atomically under tree_conns_lock. This guarantees one drop for the xarray reference and one drop by each in-flight user, regardless of which teardown path wins. If logoff removes the entry before initialization completes, fail the connect instead of marking the detached object TREE_CONNECTED. | ||||
| CVE-2026-74733 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock Locking is disabled in the regmap config as this driver uses its own lock. This means that all calls to regmap functions (read or write) must hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do this, and it was therefore possible that multiple threads could cause an incorrect register to be read/written. A previous patch partly fixed this, but only protected the write to the interrupt mask register, and not the read from the direction register. | ||||
| CVE-2026-74388 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data The OSS sequencer processes the input MIDI bytes into a sequencer event to be dispatched later (in snd_seq_oss_midi_putc() called from snd_seq_oss_process_event()). When it's a SysEx data, the event record contains data.ext.ptr pointer to the original SysEx bytes, and the referred data is copied into the pool afterwards at dispatching. The problem is that, if the sequencer port gets closed concurrently before the dispatch, the OSS sequencer core also releases the resources (in snd_seq_oss_midi_check_exit_port()), while the pending event may hold a stale pointer, eventually leading to a UAF at a later dispatch. Fortunately, there is already a refcounting mechanism (snd_use_lock_t) for the OSS MIDI device access, and for addressing the issue above, we just need to extend the refcount until the event gets dispatched. This patch extends snd_seq_oss_process_event() to give back the refcount object, which is in turn released after calling the sequencer dispatcher with the given event in the caller side. According to the original report, KASAN report as below: KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470 RIP: 0033:0x7f2cb66a6340 Read of size 6 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_seq_event_dup+0x40c/0x470 (?:?) kasan_check_range+0x10c/0x1c0 (?:?) __asan_memcpy+0x27/0x70 (?:?) snd_seq_event_dup+0x9/0x470 (?:?) snd_seq_client_enqueue_event+0x139/0x240 (?:?) _raw_spin_unlock_irqrestore+0x4b/0x60 (?:?) snd_seq_kernel_client_enqueue+0x102/0x120 (?:?) snd_seq_oss_write+0x416/0x4e0 (?:?) apparmor_file_permission+0x20/0x30 (?:?) odev_write+0x3b/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) lock_release+0xc8/0x2a0 (?:?) __kasan_check_write+0x18/0x20 (?:?) __mutex_unlock_slowpath+0x129/0x510 (?:?) ksys_write+0xe1/0x180 (?:?) mutex_unlock+0x16/0x20 (?:?) odev_ioctl+0x65/0xc0 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||