Export limit exceeded: 36358 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36358 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43304 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: define and enforce CEPH_MAX_KEY_LEN When decoding the key, verify that the key material would fit into a fixed-size buffer in process_auth_done() and generally has a sane length. The new CEPH_MAX_KEY_LEN check replaces the existing check for a key with no key material which is a) not universal since CEPH_CRYPTO_NONE has to be excluded and b) doesn't provide much value since a smaller than needed key is just as invalid as no key -- this has to be handled elsewhere anyway. | ||||
| CVE-2026-43239 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: prevent races in ->query_interfaces() It was possible for two query interface works to be concurrently trying to update the interfaces. Prevent this by checking and updating iface_last_update under iface_lock. | ||||
| CVE-2026-43214 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2() Add SRCU read-side protection when reading PDPTR registers in __get_sregs2(). Reading PDPTRs may trigger access to guest memory: kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() -> kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot() kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(), which uses srcu_dereference_check() and requires either kvm->srcu or kvm->slots_lock to be held. Currently only vcpu->mutex is held, triggering lockdep warning: ============================= WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot 6.12.59+ #3 Not tainted include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz.5.1717/15100: #0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120 lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824 __kvm_memslots include/linux/kvm_host.h:1062 [inline] __kvm_memslots include/linux/kvm_host.h:1059 [inline] kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline] kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617 kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302 load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065 svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688 kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline] __get_sregs2 arch/x86/kvm/x86.c:11784 [inline] kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279 kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-43194 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link). | ||||
| CVE-2026-43180 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls netif_stop_queue() and netif_wake_queue(). These are TX queue flow control functions unrelated to RX multicast configuration. The premature netif_wake_queue() can re-enable TX while tx_urb is still in-flight, leading to a double usb_submit_urb() on the same URB: kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); } kaweth_set_rx_mode() { netif_stop_queue(); netif_wake_queue(); // wakes TX queue before URB is done } kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); // URB submitted while active } This triggers the WARN in usb_submit_urb(): "URB submitted while active" This is a similar class of bug fixed in rtl8150 by - commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast"). Also kaweth_set_rx_mode() is already functionally broken, the real set_rx_mode action is performed by kaweth_async_set_rx_mode(), which in turn is not a no-op only at ndo_open() time. | ||||
| CVE-2026-43176 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: validate release report content before using for RTL8922DE The commit 957eda596c76 ("wifi: rtw89: pci: validate sequence number of TX release report") does validation on existing chips, which somehow a release report of SKB becomes malformed. As no clear cause found, add rules ahead for RTL8922DE to avoid crash if it happens. | ||||
| CVE-2026-43134 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ This adds a check for encryption key size upon receiving L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which expects L2CAP_CR_LE_BAD_KEY_SIZE. | ||||
| CVE-2026-43133 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB. | ||||
| CVE-2026-43117 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file() If overlay is used on top of btrfs, dentry->d_sb translates to overlay's super block and fsid assignment will lead to a crash. Use file_inode(file)->i_sb to always get btrfs_sb. | ||||
| CVE-2026-43114 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry New test case fails unexpectedly when avx2 matching functions are used. The test first loads a ranomly generated pipapo set with 'ipv4 . port' key, i.e. nft -f foo. This works. Then, it reloads the set after a flush: (echo flush set t s; cat foo) | nft -f - This is expected to work, because its the same set after all and it was already loaded once. But with avx2, this fails: nft reports a clashing element. The reported clash is of following form: We successfully re-inserted a . b c . d Then we try to insert a . d avx2 finds the already existing a . d, which (due to 'flush set') is marked as invalid in the new generation. It skips the element and moves to next. Due to incorrect masking, the skip-step finds the next matching element *only considering the first field*, i.e. we return the already reinserted "a . b", even though the last field is different and the entry should not have been matched. No such error is reported for the generic c implementation (no avx2) or when the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback. Bisection points to 7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection") but that fix merely uncovers this bug. Before this commit, the wrong element is returned, but erronously reported as a full, identical duplicate. The root-cause is too early return in the avx2 match functions. When we process the last field, we should continue to process data until the entire input size has been consumed to make sure no stale bits remain in the map. | ||||
| CVE-2026-43110 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: validate bsscfg indices in IF events brcmf_fweh_handle_if_event() validates the firmware-provided interface index before it touches drvr->iflist[], but it still uses the raw bsscfgidx field as an array index without a matching range check. Reject IF events whose bsscfg index does not fit in drvr->iflist[] before indexing the interface array. [add missing wifi prefix] | ||||
| CVE-2026-43093 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: tighten UMEM headroom validation to account for tailroom and min frame The current headroom validation in xdp_umem_reg() could leave us with insufficient space dedicated to even receive minimum-sized ethernet frame. Furthermore if multi-buffer would come to play then skb_shared_info stored at the end of XSK frame would be corrupted. HW typically works with 128-aligned sizes so let us provide this value as bare minimum. Multi-buffer setting is known later in the configuration process so besides accounting for 128 bytes, let us also take care of tailroom space upfront. | ||||
| CVE-2026-43067 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ext4: handle wraparound when searching for blocks for indirect mapped blocks Commit 4865c768b563 ("ext4: always allocate blocks only from groups inode can use") restricts what blocks will be allocated for indirect block based files to block numbers that fit within 32-bit block numbers. However, when using a review bot running on the latest Gemini LLM to check this commit when backporting into an LTS based kernel, it raised this concern: If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal group was populated via stream allocation from s_mb_last_groups), then start will be >= ngroups. Does this allow allocating blocks beyond the 32-bit limit for indirect block mapped files? The commit message mentions that ext4_mb_scan_groups_linear() takes care to not select unsupported groups. However, its loop uses group = *start, and the very first iteration will call ext4_mb_scan_group() with this unsupported group because next_linear_group() is only called at the end of the iteration. After reviewing the code paths involved and considering the LLM review, I determined that this can happen when there is a file system where some files/directories are extent-mapped and others are indirect-block mapped. To address this, add a safety clamp in ext4_mb_scan_groups(). | ||||
| CVE-2026-43063 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't irele after failing to iget in xfs_attri_recover_work xlog_recovery_iget* never set @ip to a valid pointer if they return an error, so this irele will walk off a dangling pointer. Fix that. | ||||
| CVE-2026-43060 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: drop pending enqueued packets on removal Packets sitting in nfqueue might hold a reference to: - templates that specify the conntrack zone, because a percpu area is used and module removal is possible. - conntrack timeout policies and helper, where object removal leave a stale reference. Since these objects can just go away, drop enqueued packets to avoid stale reference to them. If there is a need for finer grain removal, this logic can be revisited to make selective packet drop upon dependencies. | ||||
| CVE-2026-43055 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: file: Use kzalloc_flex for aio_cmd The target_core_file doesn't initialize the aio_cmd->iocb for the ki_write_stream. When a write command fd_execute_rw_aio() is executed, we may get a bogus ki_write_stream value, causing unintended write failure status when checking iocb->ki_write_stream > max_write_streams in the block device. Let's just use kzalloc_flex when allocating the aio_cmd and let ki_write_stream=0 to fix this issue. | ||||
| CVE-2026-43038 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a fake TLV without checking if the remaining packet length can hold the full 18-byte struct ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err() needs to be changed. A separate patch would be better anyway. | ||||
| CVE-2026-43033 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption When decrypting data that is not in-place (src != dst), there is no need to save the high-order sequence bits in dst as it could simply be re-copied from the source. However, the data to be hashed need to be rearranged accordingly. Thanks, | ||||
| CVE-2026-43030 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix regsafe() for pointers to packet In case rold->reg->range == BEYOND_PKT_END && rcur->reg->range == N regsafe() may return true which may lead to current state with valid packet range not being explored. Fix the bug. | ||||
| CVE-2026-31788 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: restrict usage in unprivileged domU The Xen privcmd driver allows to issue arbitrary hypercalls from user space processes. This is normally no problem, as access is usually limited to root and the hypervisor will deny any hypercalls affecting other domains. In case the guest is booted using secure boot, however, the privcmd driver would be enabling a root user process to modify e.g. kernel memory contents, thus breaking the secure boot feature. The only known case where an unprivileged domU is really needing to use the privcmd driver is the case when it is acting as the device model for another guest. In this case all hypercalls issued via the privcmd driver will target that other guest. Fortunately the privcmd driver can already be locked down to allow only hypercalls targeting a specific domain, but this mode can be activated from user land only today. The target domain can be obtained from Xenstore, so when not running in dom0 restrict the privcmd driver to that target domain from the beginning, resolving the potential problem of breaking secure boot. This is XSA-482 --- V2: - defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich) - wait in open() if target domain isn't known yet - issue message in case no target domain found (Jan Beulich) | ||||