Export limit exceeded: 413848 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 30000 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 36357 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36357 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45955 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout When llbitmap_suspend_timeout() times out waiting for percpu_ref to become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref. The caller (md_llbitmap_daemon_fn) then continues to the next page without calling llbitmap_resume(), leaving the percpu_ref in a killed state permanently. Fix this by resurrecting the percpu_ref before returning the error, ensuring the page control structure remains usable for subsequent operations. | ||||
| CVE-2026-45933 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve id of register in sync_linked_regs() sync_linked_regs() copies the id of known_reg to reg when propagating bounds of known_reg to reg using the off of known_reg, but when known_reg was linked to reg like: known_reg = reg ; both known_reg and reg get same id known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST now when a call to sync_linked_regs() happens, let's say with the following: if known_reg >= 10 goto pc+2 known_reg's new bounds are propagated to reg but now reg gets BPF_ADD_CONST from the copy. This means if another link to reg is created like: another_reg = reg ; another_reg should get the id of reg but assign_scalar_id_before_mov() sees BPF_ADD_CONST on reg and assigns a new id to it. As reg has a new id now, known_reg's link to reg is broken. If we find new bounds for known_reg, they will not be propagated to reg. This can be seen in the selftest added in the next commit: 0: (85) call bpf_get_prandom_u32#7 ; R0=scalar() 1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) 2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) 3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) 6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf)) 8: (37) r0 /= 0 div by zero When 4 is verified, r1's bounds are propagated to r0 but r0 also gets BPF_ADD_CONST (bug). When 5 is verified, r0 gets a new id (2) and its link with r1 is broken. After 6 we know r1 has bounds [14, 259] and therefore r0 should have bounds [10, 255], therefore the branch at 7 is always taken. But because r0's id was changed to 2, r1's new bounds are not propagated to r0. The verifier still thinks r0 has bounds [6, 255] before 7 and execution can reach div by zero. Fix this by preserving id in sync_linked_regs() like off and subreg_def. | ||||
| CVE-2026-45878 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 The address watch clear code receives watch_id as an unsigned value (u32), but some helper functions were using a signed int and checked bits by shifting with watch_id. If a very large watch_id is passed from userspace, it can be converted to a negative value. This can cause invalid shifts and may access memory outside the watch_points array. drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before using it. Also use BIT(watch_id) to test and clear bits safely. This keeps the behavior unchanged for valid watch IDs and avoids undefined behavior for invalid ones. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448 kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow 'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c 433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd, 434 uint32_t watch_id) 435 { 436 int r; 437 438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id)) kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if watch_id is larger than INT_MAX it leads to a buffer overflow. (Negative shifts are undefined). 439 return -EINVAL; 440 441 if (!pdd->dev->kfd->shared_resources.enable_mes) { 442 r = debug_lock_and_unmap(pdd->dev->dqm); 443 if (r) 444 return r; 445 } 446 447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false); --> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch( 449 pdd->dev->adev, 450 watch_id); v2: (as per, Jonathan Kim) - Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to match the clear path. - Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id(). | ||||
| CVE-2026-45862 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush cache for PASID table before using it When writing the address of a freshly allocated zero-initialized PASID table to a PASID directory entry, do that after the CPU cache flush for this PASID table, not before it, to avoid the time window when this PASID table may be already used by non-coherent IOMMU hardware while its contents in RAM is still some random old data, not zero-initialized. | ||||
| CVE-2026-45860 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: increase the connection clean up limit to 64 After the optimization to only perform one GC per jiffy, a new problem was introduced. If more than 8 new connections are tracked per jiffy the list won't be cleaned up fast enough possibly reaching the limit wrongly. In order to prevent this issue, only skip the GC if it was already triggered during the same jiffy and the increment is lower than the clean up limit. In addition, increase the clean up limit to 64 connections to avoid triggering GC too often and do more effective GCs. This has been tested using a HTTP server and several performance tools while having nft_connlimit/xt_connlimit or OVS limit configured. Output of slowhttptest + OVS limit at 52000 connections: slow HTTP test status on 340th second: initializing: 0 pending: 432 connected: 51998 error: 0 closed: 0 service available: YES | ||||
| CVE-2026-45843 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: slip: bound decode() reads against the compressed packet length slhc_uncompress() parses a VJ-compressed TCP header by advancing a pointer through the packet via decode() and pull16(). Neither helper bounds-checks against isize, and decode() masks its return with & 0xffff so it can never return the -1 that callers test for -- those error paths are dead code. A short compressed frame whose change byte requests optional fields lets decode() read past the end of the packet. The over-read bytes are folded into the cached cstate and reflected into subsequent reconstructed packets. Make decode() and pull16() take the packet end pointer and return -1 when exhausted. Add a bounds check before the TCP-checksum read. The existing == -1 tests now do what they were always meant to. | ||||
| CVE-2026-43494 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: reset op_nents when zerocopy page pin fails When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(), the pinned pages are released with put_page(), and rm->data.op_mmp_znotifier is cleared. But we fail to properly clear rm->data.op_nents. Later when rds_message_purge() is called from rds_sendmsg() the cleanup loop iterates over the incorrectly non zero number of op_nents and frees them again. Fix this by properly resetting op_nents when it should be in rds_message_zcopy_from_user(). | ||||
| CVE-2026-43493 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix handling of MAY_BACKLOG requests MAY_BACKLOG requests can return EBUSY. Handle them by checking for that value and filtering out EINPROGRESS notifications. | ||||
| CVE-2026-43469 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Decrement re_receiving on the early exit paths In the event that rpcrdma_post_recvs() fails to create a work request (due to memory allocation failure, say) or otherwise exits early, we should decrement ep->re_receiving before returning. Otherwise we will hang in rpcrdma_xprt_drain() as re_receiving will never reach zero and the completion will never be triggered. On a system with high memory pressure, this can appear as the following hung task: INFO: task kworker/u385:17:8393 blocked for more than 122 seconds. Tainted: G S E 6.19.0 #3 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u385:17 state:D stack:0 pid:8393 tgid:8393 ppid:2 task_flags:0x4248060 flags:0x00080000 Workqueue: xprtiod xprt_autoclose [sunrpc] Call Trace: <TASK> __schedule+0x48b/0x18b0 ? ib_post_send_mad+0x247/0xae0 [ib_core] schedule+0x27/0xf0 schedule_timeout+0x104/0x110 __wait_for_common+0x98/0x180 ? __pfx_schedule_timeout+0x10/0x10 wait_for_completion+0x24/0x40 rpcrdma_xprt_disconnect+0x444/0x460 [rpcrdma] xprt_rdma_close+0x12/0x40 [rpcrdma] xprt_autoclose+0x5f/0x120 [sunrpc] process_one_work+0x191/0x3e0 worker_thread+0x2e3/0x420 ? __pfx_worker_thread+0x10/0x10 kthread+0x10d/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x273/0x2b0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-43466 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: <IRQ> ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 | ||||
| CVE-2026-43452 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: guard option walkers against 1-byte tail reads When the last byte of options is a non-single-byte option kind, walkers that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end of the option area. Add an explicit i == optlen - 1 check before dereferencing op[i + 1] in xt_tcpudp and xt_dccp option walkers. | ||||
| CVE-2026-43366 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks. | ||||
| CVE-2026-43365 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix undersized l_iclog_roundoff values If the superblock doesn't list a log stripe unit, we set the incore log roundoff value to 512. This leads to corrupt logs and unmountable filesystems in generic/617 on a disk with 4k physical sectors... XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197. XFS (sda1): failed to locate log tail XFS (sda1): log mount/recovery failed: error -74 XFS (sda1): log mount failed XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Ending clean mount ...on the current xfsprogs for-next which has a broken mkfs. xfs_info shows this... meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=1 = reflink=1 bigtime=1 inobtcount=1 nrext64=1 = exchange=1 metadir=1 data = bsize=4096 blocks=2579968, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1 log =internal log bsize=4096 blocks=16384, version=2 = sectsz=4096 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 = rgcount=0 rgsize=268435456 extents = zoned=0 start=0 reserved=0 ...observe that the log section has sectsz=4096 sunit=0, which means that the roundoff factor is 512, not 4096 as you'd expect. We should fix mkfs not to generate broken filesystems, but anyone can fuzz the ondisk superblock so we should be more cautious. I think the inadequate logic predates commit a6a65fef5ef8d0, but that's clearly going to require a different backport. | ||||
| CVE-2026-43350 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.6 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: require a full NFS mode SID before reading mode bits parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS mode SID and reads sid.sub_auth[2] to recover the mode bits. That assumes the ACE carries three subauthorities, but compare_sids() only compares min(a, b) subauthorities. A malicious server can return an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still matches sid_unix_NFS_mode and then drives the sub_auth[2] read four bytes past the end of the ACE. Require num_subauth >= 3 before treating the ACE as an NFS mode SID. This keeps the fix local to the special-SID mode path without changing compare_sids() semantics for the rest of cifsacl. | ||||
| CVE-2026-43334 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: force responder MITM requirements before building the pairing response smp_cmd_pairing_req() currently builds the pairing response from the initiator auth_req before enforcing the local BT_SECURITY_HIGH requirement. If the initiator omits SMP_AUTH_MITM, the response can also omit it even though the local side still requires MITM. tk_request() then sees an auth value without SMP_AUTH_MITM and may select JUST_CFM, making method selection inconsistent with the pairing policy the responder already enforces. When the local side requires HIGH security, first verify that MITM can be achieved from the IO capabilities and then force SMP_AUTH_MITM in the response in both rsp.auth_req and auth. This keeps the responder auth bits and later method selection aligned. | ||||
| CVE-2026-43332 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path. | ||||
| CVE-2026-43329 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups. | ||||
| CVE-2026-43321 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Properly mark live registers for indirect jumps For a `gotox rX` instruction the rX register should be marked as used in the compute_insn_live_regs() function. Fix this. | ||||
| CVE-2026-43304 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: define and enforce CEPH_MAX_KEY_LEN When decoding the key, verify that the key material would fit into a fixed-size buffer in process_auth_done() and generally has a sane length. The new CEPH_MAX_KEY_LEN check replaces the existing check for a key with no key material which is a) not universal since CEPH_CRYPTO_NONE has to be excluded and b) doesn't provide much value since a smaller than needed key is just as invalid as no key -- this has to be handled elsewhere anyway. | ||||
| CVE-2026-43239 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: prevent races in ->query_interfaces() It was possible for two query interface works to be concurrently trying to update the interfaces. Prevent this by checking and updating iface_last_update under iface_lock. | ||||