Export limit exceeded: 54134 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (54134 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43190 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_tcpmss: check remaining length before reading optlen Quoting reporter: In net/netfilter/xt_tcpmss.c (lines 53-68), the TCP option parser reads op[i+1] directly without validating the remaining option length. If the last byte of the option field is not EOL/NOP (0/1), the code attempts to index op[i+1]. In the case where i + 1 == optlen, this causes an out-of-bounds read, accessing memory past the optlen boundary (either reading beyond the stack buffer _opt or the following payload). | ||||
| CVE-2026-43187 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: delete attr leaf freemap entries when empty Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow"), Brian Foster observed that it's possible for a small freemap at the end of the end of the xattr entries array to experience a size underflow when subtracting the space consumed by an expansion of the entries array. There are only three freemap entries, which means that it is not a complete index of all free space in the leaf block. This code can leave behind a zero-length freemap entry with a nonzero base. Subsequent setxattr operations can increase the base up to the point that it overlaps with another freemap entry. This isn't in and of itself a problem because the code in _leaf_add that finds free space ignores any freemap entry with zero size. However, there's another bug in the freemap update code in _leaf_add, which is that it fails to update a freemap entry that begins midway through the xattr entry that was just appended to the array. That can result in the freemap containing two entries with the same base but different sizes (0 for the "pushed-up" entry, nonzero for the entry that's actually tracking free space). A subsequent _leaf_add can then allocate xattr namevalue entries on top of the entries array, leading to data loss. But fixing that is for later. For now, eliminate the possibility of confusion by zeroing out the base of any freemap entry that has zero size. Because the freemap is not intended to be a complete index of free space, a subsequent failure to find any free space for a new xattr will trigger block compaction, which regenerates the freemap. It looks like this bug has been in the codebase for quite a long time. | ||||
| CVE-2026-43120 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix double free related to rereg_user_mr If IB_MR_REREG_TRANS is set during rereg_user_mr, the umem will be released and a new one will be allocated in irdma_rereg_mr_trans. If any step of irdma_rereg_mr_trans fails after the new umem is allocated, it releases the umem, but does not set iwmr->region to NULL. The problem is that this failure is propagated to the user, who will then call ibv_dereg_mr (as they should). Then, the dereg_mr path will see a non-NULL umem and attempt to call ib_umem_release again. Fix this by setting iwmr->region to NULL after ib_umem_release. Fixed: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region") | ||||
| CVE-2026-43112 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/smb/client: fix out-of-bounds read in cifs_sanitize_prepath When cifs_sanitize_prepath is called with an empty string or a string containing only delimiters (e.g., "/"), the current logic attempts to check *(cursor2 - 1) before cursor2 has advanced. This results in an out-of-bounds read. This patch adds an early exit check after stripping prepended delimiters. If no path content remains, the function returns NULL. The bug was identified via manual audit and verified using a standalone test case compiled with AddressSanitizer, which triggered a SEGV on affected inputs. | ||||
| CVE-2026-43071 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dcache: Limit the minimal number of bucket to two There is an OOB read problem on dentry_hashtable when user sets 'dhash_entries=1': BUG: unable to handle page fault for address: ffff888b30b774b0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP PTI RIP: 0010:__d_lookup+0x56/0x120 Call Trace: d_lookup.cold+0x16/0x5d lookup_dcache+0x27/0xf0 lookup_one_qstr_excl+0x2a/0x180 start_dirop+0x55/0xa0 simple_start_creating+0x8d/0xa0 debugfs_start_creating+0x8c/0x180 debugfs_create_dir+0x1d/0x1c0 pinctrl_init+0x6d/0x140 do_one_initcall+0x6d/0x3d0 kernel_init_freeable+0x39f/0x460 kernel_init+0x2a/0x260 There will be only one bucket in dentry_hashtable when dhash_entries is set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then, following process will access more than one buckets(which memory region is not allocated) in dentry_hashtable: d_lookup b = d_hash(hash) dentry_hashtable + ((u32)hashlen >> d_hash_shift) // The C standard defines the behavior of right shift amounts // exceeding the bit width of the operand as undefined. The // result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen', // so 'b' will point to an unallocated memory region. hlist_bl_for_each_entry_rcu(b) hlist_bl_first_rcu(head) h->first // read OOB! Fix it by limiting the minimal number of dentry_hashtable bucket to two, so that 'd_hash_shift' won't exceeds the bit width of type u32. | ||||
| CVE-2026-43051 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq The wacom_intuos_bt_irq() function processes Bluetooth HID reports without sufficient bounds checking. A maliciously crafted short report can trigger an out-of-bounds read when copying data into the wacom structure. Specifically, report 0x03 requires at least 22 bytes to safely read the processed data and battery status, while report 0x04 (which falls through to 0x03) requires 32 bytes. Add explicit length checks for these report IDs and log a warning if a short report is received. | ||||
| CVE-2026-43028 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: ensure names are nul-terminated Reject names that lack a \0 character before feeding them to functions that expect c-strings. Fixes tag is the most recent commit that needs this change. | ||||
| CVE-2026-43025 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ignore explicit helper on new expectations Use the existing master conntrack helper, anything else is not really supported and it just makes validation more complicated, so just ignore what helper userspace suggests for this expectation. This was uncovered when validating CTA_EXPECT_CLASS via different helper provided by userspace than the existing master conntrack helper: BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0 Read of size 4 at addr ffff8880043fe408 by task poc/102 Call Trace: nf_ct_expect_related_report+0x2479/0x27c0 ctnetlink_create_expect+0x22b/0x3b0 ctnetlink_new_expect+0x4bd/0x5c0 nfnetlink_rcv_msg+0x67a/0x950 netlink_rcv_skb+0x120/0x350 Allowing to read kernel memory bytes off the expectation boundary. CTA_EXPECT_HELP_NAME is still used to offer the helper name to userspace via netlink dump. | ||||
| CVE-2026-43011 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix potential double free of skb When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at line 48 and returns 1 (error). This error propagates back through the call chain: x25_queue_rx_frame returns 1 | v x25_state3_machine receives the return value 1 and takes the else branch at line 278, setting queued=0 and returning 0 | v x25_process_rx_frame returns queued=0 | v x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb) again This would free the same skb twice. Looking at x25_backlog_rcv: net/x25/x25_in.c:x25_backlog_rcv() { ... queued = x25_process_rx_frame(sk, skb); ... if (!queued) kfree_skb(skb); } | ||||
| CVE-2026-31779 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix potential out-of-bounds read in iwl_mvm_nd_match_info_handler() The memcpy function assumes the dynamic array notif->matches is at least as large as the number of bytes to copy. Otherwise, results->matches may contain unwanted data. To guarantee safety, extend the validation in one of the checks to ensure sufficient packet length. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-31742 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vt: discard stale unicode buffer on alt screen exit after resize When enter_alt_screen() saves vc_uni_lines into vc_saved_uni_lines and sets vc_uni_lines to NULL, a subsequent console resize via vc_do_resize() skips reallocating the unicode buffer because vc_uni_lines is NULL. However, vc_saved_uni_lines still points to the old buffer allocated for the original dimensions. When leave_alt_screen() later restores vc_saved_uni_lines, the buffer dimensions no longer match vc_rows/vc_cols. Any operation that iterates over the unicode buffer using the current dimensions (e.g. csi_J clearing the screen) will access memory out of bounds, causing a kernel oops: BUG: unable to handle page fault for address: 0x0000002000000020 RIP: 0010:csi_J+0x133/0x2d0 The faulting address 0x0000002000000020 is two adjacent u32 space characters (0x20) interpreted as a pointer, read from the row data area past the end of the 25-entry pointer array in a buffer allocated for 80x25 but accessed with 240x67 dimensions. Fix this by checking whether the console dimensions changed while in the alternate screen. If they did, free the stale saved buffer instead of restoring it. The unicode screen will be lazily rebuilt via vc_uniscr_check() when next needed. | ||||
| CVE-2026-31708 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL and the default QUERY_INFO path. The QUERY_INFO branch clamps qi.input_buffer_length to the server-reported OutputBufferLength and then copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but it never verifies that the flexible-array payload actually fits within rsp_iov[1].iov_len. A malicious server can return OutputBufferLength larger than the actual QUERY_INFO response, causing copy_to_user() to walk past the response buffer and expose adjacent kernel heap to userspace. Guard the QUERY_INFO copy with a bounds check on the actual Buffer payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length) rather than an open-coded addition so the guard cannot overflow on 32-bit builds. | ||||
| CVE-2026-31659 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject oversized global TT response buffers batadv_tt_prepare_tvlv_global_data() builds the allocation length for a global TT response in 16-bit temporaries. When a remote originator advertises a large enough global TT, the TT payload length plus the VLAN header offset can exceed 65535 and wrap before kmalloc(). The full-table response path still uses the original TT payload length when it fills tt_change, so the wrapped allocation is too small and batadv_tt_prepare_tvlv_global_data() writes past the end of the heap object before the later packet-size check runs. Fix this by rejecting TT responses whose TVLV value length cannot fit in the 16-bit TVLV payload length field. | ||||
| CVE-2026-31649 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix integer underflow in chain mode The jumbo_frm() chain-mode implementation unconditionally computes len = nopaged_len - bmax; where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit() decides to invoke jumbo_frm() based on skb->len (total length including page fragments): is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc); When a packet has a small linear portion (nopaged_len <= bmax) but a large total length due to page fragments (skb->len > bmax), the subtraction wraps as an unsigned integer, producing a huge len value (~0xFFFFxxxx). This causes the while (len != 0) loop to execute hundreds of thousands of iterations, passing skb->data + bmax * i pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less SoCs (the typical deployment for stmmac), this maps arbitrary kernel memory to the DMA engine, constituting a kernel memory disclosure and potential memory corruption from hardware. Fix this by introducing a buf_len local variable clamped to min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then always safe: it is zero when the linear portion fits within a single descriptor, causing the while (len != 0) loop to be skipped naturally, and the fragment loop in stmmac_xmit() handles page fragments afterward. | ||||
| CVE-2026-31648 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: filemap: fix nr_pages calculation overflow in filemap_map_pages() When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I encountered some very strange crash issues showing up as "Bad page state": " [ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb [ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb [ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff) [ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000 [ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000 [ 734.496442] page dumped because: nonzero mapcount " After analyzing this page’s state, it is hard to understand why the mapcount is not 0 while the refcount is 0, since this page is not where the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can reproduce the crash as well and captured the first warning where the issue appears: " [ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0 [ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 734.469315] memcg:ffff000807a8ec00 [ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540" [ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff) ...... [ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1), const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *: (struct folio *)_compound_head(page + nr_pages - 1))) != folio) [ 734.469390] ------------[ cut here ]------------ [ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468, CPU#90: stress-ng-mlock/9430 [ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P) [ 734.469555] set_pte_range+0xd8/0x2f8 [ 734.469566] filemap_map_folio_range+0x190/0x400 [ 734.469579] filemap_map_pages+0x348/0x638 [ 734.469583] do_fault_around+0x140/0x198 ...... [ 734.469640] el0t_64_sync+0x184/0x188 " The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page + nr_pages - 1) != folio, folio)", which indicates that set_pte_range() tried to map beyond the large folio’s size. By adding more debug information, I found that 'nr_pages' had overflowed in filemap_map_pages(), causing set_pte_range() to establish mappings for a range exceeding the folio size, potentially corrupting fields of pages that do not belong to this folio (e.g., page->_mapcount). After above analysis, I think the possible race is as follows: CPU 0 CPU 1 filemap_map_pages() ext4_setattr() //get and lock folio with old inode->i_size next_uptodate_folio() ....... //shrink the inode->i_size i_size_write(inode, attr->ia_size); //calculate the end_pgoff with the new inode->i_size file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1; end_pgoff = min(end_pgoff, file_end); ...... //nr_pages can be overflowed, cause xas.xa_index > end_pgoff end = folio_next_index(folio) - 1; nr_pages = min(end, end_pgoff) - xas.xa_index + 1; ...... //map large folio filemap_map_folio_range() ...... //truncate folios truncate_pagecache(inode, inode->i_size); To fix this issue, move the 'end_pgoff' calculation before next_uptodate_folio(), so the retrieved folio stays consistent with the file end to avoid ---truncated--- | ||||
| CVE-2026-31633 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix integer overflow in rxgk_verify_response() In rxgk_verify_response(), there's a potential integer overflow due to rounding up token_len before checking it, thereby allowing the length check to be bypassed. Fix this by checking the unrounded value against len too (len is limited as the response must fit in a single UDP packet). | ||||
| CVE-2026-31613 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB reads parsing symlink error response When a CREATE returns STATUS_STOPPED_ON_SYMLINK, smb2_check_message() returns success without any length validation, leaving the symlink parsers as the only defense against an untrusted server. symlink_data() walks SMB 3.1.1 error contexts with the loop test "p < end", but reads p->ErrorId at offset 4 and p->ErrorDataLength at offset 0. When the server-controlled ErrorDataLength advances p to within 1-7 bytes of end, the next iteration will read past it. When the matching context is found, sym->SymLinkErrorTag is read at offset 4 from p->ErrorContextData with no check that the symlink header itself fits. smb2_parse_symlink_response() then bounds-checks the substitute name using SMB2_SYMLINK_STRUCT_SIZE as the offset of PathBuffer from iov_base. That value is computed as sizeof(smb2_err_rsp) + sizeof(smb2_symlink_err_rsp), which is correct only when ErrorContextCount == 0. With at least one error context the symlink data sits 8 bytes deeper, and each skipped non-matching context shifts it further by 8 + ALIGN(ErrorDataLength, 8). The check is too short, allowing the substitute name read to run past iov_len. The out-of-bound heap bytes are UTF-16-decoded into the symlink target and returned to userspace via readlink(2). Fix this all up by making the loops test require the full context header to fit, rejecting sym if its header runs past end, and bound the substitute name against the actual position of sym->PathBuffer rather than a fixed offset. Because sub_offs and sub_len are 16bits, the pointer math will not overflow here with the new greater-than. | ||||
| CVE-2026-31609 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid double-free in smbd_free_send_io() after smbd_send_batch_flush() smbd_send_batch_flush() already calls smbd_free_send_io(), so we should not call it again after smbd_post_send() moved it to the batch list. | ||||
| CVE-2026-31528 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf: Make sure to use pmu_ctx->pmu for groups Oliver reported that x86_pmu_del() ended up doing an out-of-bound memory access when group_sched_in() fails and needs to roll back. This *should* be handled by the transaction callbacks, but he found that when the group leader is a software event, the transaction handlers of the wrong PMU are used. Despite the move_group case in perf_event_open() and group_sched_in() using pmu_ctx->pmu. Turns out, inherit uses event->pmu to clone the events, effectively undoing the move_group case for all inherited contexts. Fix this by also making inherit use pmu_ctx->pmu, ensuring all inherited counters end up in the same pmu context. Similarly, __perf_event_read() should use equally use pmu_ctx->pmu for the group case. | ||||
| CVE-2026-31525 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN The BPF interpreter's signed 32-bit division and modulo handlers use the kernel abs() macro on s32 operands. The abs() macro documentation (include/linux/math.h) explicitly states the result is undefined when the input is the type minimum. When DST contains S32_MIN (0x80000000), abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged on arm64/x86. This value is then sign-extended to u64 as 0xFFFFFFFF80000000, causing do_div() to compute the wrong result. The verifier's abstract interpretation (scalar32_min_max_sdiv) computes the mathematically correct result for range tracking, creating a verifier/interpreter mismatch that can be exploited for out-of-bounds map value access. Introduce abs_s32() which handles S32_MIN correctly by casting to u32 before negating, avoiding signed overflow entirely. Replace all 8 abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers. s32 is the only affected case -- the s64 division/modulo handlers do not use abs(). | ||||