Export limit exceeded: 414013 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 414013 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (414013 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98846 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: check RCV_SHUTDOWN after the sendmsg connect wait sctp_wait_for_connect() drops the socket lock while it sleeps. An out-of-the-blue ABORT can then be processed from the socket backlog and unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets RCV_SHUTDOWN, the waiter breaks with err == 0 before checking asoc->base.dead. Its final sctp_association_put() can then free the association, leaving sctp_sendmsg_to_asoc() to continue with a dangling pointer. Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc() before using the association again. The check only accesses the socket, so it needs no additional association reference. Return the existing -ESRCH so that sctp_sendmsg() skips freeing a new association that may already have been destroyed. Keep sctp_wait_for_connect() unchanged to preserve its behavior for the connect() caller. | ||||
| CVE-2026-98852 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: extend IPv6 exthdr detection of tunneled packets Commit c4336a07eb6b ("net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback") split skb_gso_has_extension_hdr() into mutually exclusive branches on skb->encapsulation. This did not yet address all paths: 1. With skb->encapsulation set, the outer header is not checked. IPv6 tunnels such as ip6_gre and ip6_tunnel add an outer Destination Options header by default (encap_limit). Their GSO packets skip software GSO, then skb_csum_hwoffload_help() sees the outer extension header and calls skb_checksum_help() on the GSO skb, which warns and drops it. 2. Tunnels over IPv6 without an outer transport header, such as ip6_tunnel, leave skb->transport_header at the inner transport header. skb_network_header_len() then spans the outer IPv6, tunnel and inner IP headers, a false positive. 3. UDP tunnels without an inner network header, such as SCTP-in-UDP or PSP, have no inner IPv6 header to check. Decide on the outer header alone. 4. Directly dereferencing inner_ip_hdr(skb)->version without skb_header_pointer() is unsafe. Instead, check ipv6_ext_hdr(nexthdr) on the outer IPv6 header and, if set, on the inner IPv6 header. Read the headers with skb_header_pointer(). Keep the skb_network_header_len() check when !skb->encapsulation to also catch encapsulated packets without skb->encapsulation (e.g., virtio). Use the same helper in skb_csum_hwoffload_help(). Its open coded test has the false positive of (2) and ignores the inner header. Background: checksum offload of tunneled packets invariants: Non-GSO skb: - If the inner packet is CHECKSUM_PARTIAL, Local Checksum Offload computes the outer checksum in software and the device offloads only the inner L4 checksum. - If the inner packet is CHECKSUM_NONE (e.g., SCTP-in-UDP, ESP-in-UDP, Remote Checksum Offload), the device offloads the outer UDP or GRE checksum instead. GSO skb: - A device with NETIF_F_GSO_UDP_TUNNEL_CSUM or NETIF_F_GSO_GRE_CSUM computes both inner and outer checksums per segment. The outer checksum is seeded with only the pseudo-header checksum. A NETIF_F_IPV6_CSUM device must parse through the outer headers to reach the inner ones. | ||||
| CVE-2026-99038 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memstick: rtsx_usb_ms: complete requests after eject instead of dropping them memstick_check() can pass its host->removing check just before rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject is set, and drv_remove's cancel_work_sync() can also cancel a queued handle_req before it picks the request up. Nobody completes card->mrq_complete. Once memstick core waits for requests without a timeout ("memstick: core: wait for request completion before freeing card"), this hangs removal: memstick_check() never returns and memstick_remove_host() blocks in flush_workqueue(): INFO: task kworker/u10:3:65 blocked for more than 20 seconds. Workqueue: kmemstick memstick_check __wait_for_common memstick_check INFO: task kworker/1:1:33 blocked for more than 20 seconds. Workqueue: usb_hub_wq hub_event __flush_workqueue memstick_remove_host rtsx_usb_ms_drv_remove Never drop a request. rtsx_usb_ms_request() always schedules handle_req, and handle_req fails requests with -ENOMEDIUM once eject is set, without touching the device. drv_remove flushes handle_req instead of cancelling it, and cancels it only after memstick_remove_host(), when no new request can arrive, so it cannot run on a freed host. The host_mutex drain in drv_remove is removed: handle_req always leaves host->req NULL when it finishes, so the drain never had anything to do, and it would now race with handle_req. | ||||
| CVE-2026-98787 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix missing migration protection in __rhtab_map_lookup_and_delete_batch() bpf_mem_cache_free_rcu() uses this_cpu_ptr() which requires migration to be disabled. All callers of rhtab_delete_elem() disable migration except __rhtab_map_lookup_and_delete_batch(), which calls it under rcu_read_lock() only. On CONFIG_PREEMPT_RCU, rcu_read_lock() does not disable preemption or migration, so the task can migrate between CPUs during the delete loop, causing this_cpu_ptr() to trigger: BUG: using smp_processor_id() in preemptible [00000000] code Fix by wrapping the delete loop in migrate_disable()/migrate_enable() in __rhtab_map_lookup_and_delete_batch(), matching the migration protection that the other callers already provide. | ||||
| CVE-2026-98804 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: page_pool: fix use-after-free in page_pool_recycle_ring_bulk() With CONFIG_PAGE_POOL_STATS=y, page_pool_recycle_ring_bulk() updates the recycle stats after dropping the producer lock. If it just recycled the last inflight netmems of a pool being destroyed, page_pool_release() can pass its producer-lock barrier and free the pool before recycle_stat_add() runs. Commit fcc680a647ba7 ("page_pool: allow mixing PPs within one bulk") moved this stat update after the unlock. Commit 271683bb2cf32 ("page_pool: Fix use-after-free in page_pool_recycle_in_ring") later added the barrier, but only fixed page_pool_recycle_in_ring(). Move the update back under the lock. | ||||
| CVE-2026-98807 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds when handling team device events The mlx5_handle_changeupper_event() and mlx5_handle_changeinfodata_event() functions check for LAG masters (which includes both bonding and team devices) but only call bonding-specific APIs. When processing team device events, calling bond_slave_get_rcu() and bond_is_slave_inactive() on team_port structures causes KASAN to detect an out-of-bounds memory access since team_port is smaller than bond slave. Fix this by wrapping the bond-specific API calls with a check for bonding devices. This allows the function to still process LAG events for both bonding and teams but only calls bond-specific functions when dealing with actual bonding devices. For mlx5_handle_changeinfodata_event(), keep the explicit bond check as mlx5 doesn't handle state information for team ports anyway. Tested with Mellanox ConnectX-5 on Linux 7.2.0-rc6: - Bonding: PASS (no regressions) - Team device: PASS (no KASAN errors) | ||||
| CVE-2026-98812 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mctp: publish the mctp_dev only after it is initialised mctp_add_dev() links the new mctp_dev into dev->mctp_ptr before mdev->dev is assigned, so a reader that picks the device up in that window dereferences a net_device pointer that is still NULL: KASAN: null-ptr-deref in range [0x00000000000000b0-0x00000000000000b7] Call Trace: <TASK> ? __pfx_mctp_sendmsg (./include/linux/sockptr.h:49) ? __pfx_mctp_dst_output (net/mctp/route.c:41) ? selinux_socket_sendmsg (security/selinux/hooks.c:5278) ____sys_sendmsg (net/socket.c:775 (discriminator 1) net/socket.c:790 (discriminator 1) net/socket.c:2684 (discriminator 1)) ? __pfx_____sys_sendmsg (net/socket.c:1131) ? __pfx_copy_msghdr_from_user (net/socket.c:2590) ? update_cfs_rq_load_avg (kernel/sched/fair.c:5478) ___sys_sendmsg (net/socket.c:2738) ? __pfx____sys_sendmsg (net/socket.c:2625) ? perf_event_task_tick (./include/linux/rcupdate.h:838) ? sched_tick (kernel/sched/core.c:5818) ? clockevents_program_event (kernel/time/clockevents.c:372) ? fdget (./include/linux/rcupdate.h:873 fs/file.c:1100) __sys_sendmsg (net/socket.c:2770) ? __pfx___sys_sendmsg (net/socket.c:2751) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Fix by publishing only once the object is fully initialised: __mctp_dev_get() runs under rcu_read_lock() only and hands this object to readers as soon as mctp_ptr is assigned, so they must never observe mdev->dev == NULL. | ||||
| CVE-2026-98815 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix cdev lifetime Sashiko bot reported a potential problem for the cdev lifetime in [0] - the code there is heavily based on the NVMe code. Currently the NS head .open and .release file_operations methods take and put a reference to the nvme_ns_head to ensure that this structure does not disappear while we open fds for that cdev. In multipath mode, when we teardown the NS head, we call nvme_cdev_del() -> cdev_device_del() -> cdev_del(). However after cdev_del() returns, cdevs already open will remain and their fops will still be callable. As such, we can still reference the cdev after the nvme_ns_head reference count drops to 0 (and is freed). This can be shown with an application which delays between opening the cdev and issuing the ioctl while the NS head is being torn down: # ./ioctl_file /dev/ng1n1 & # waiting 10 seconds .... # ./ini_nvme_teardown.sh [ 21.221718] nvme nvme1: Removing ctrl: NQN "nvme-test-target" [ 21.274609] nvme nvme2: Removing ctrl: NQN "nvme-test-target" # now going to issue ioctl .... [ 26.549285] ================================================================== [ 26.550841] BUG: KASAN: slab-use-after-free in cdev_put.part.0+0x3d/0x40 [ 26.552352] Read of size 8 at addr ffff88811e7fa170 by task ioctl_file/237 [ 26.553805] [ 26.554227] CPU: 3 UID: 0 PID: 237 Comm: ioctl_file Not tainted 7.2.0-rc1-00004-g6852a10e32d4 #921 PREEMPT(lazy) [ 26.554236] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 26.554241] Call Trace: [ 26.554245] <TASK> [ 26.554248] dump_stack_lvl+0x68/0xa0 [ 26.554266] print_report+0x10d/0x5d0 [ 26.554276] ? __virt_addr_valid+0x21d/0x3f0 [ 26.554287] ? cdev_put.part.0+0x3d/0x40 [ 26.554292] kasan_report+0x96/0xd0 [ 26.554300] ? cdev_put.part.0+0x3d/0x40 [ 26.554307] cdev_put.part.0+0x3d/0x40 [ 26.554313] __fput+0x7bc/0xa70 [ 26.554322] fput_close_sync+0xd8/0x190 [ 26.554328] ? __pfx_fput_close_sync+0x10/0x10 [ 26.554337] __x64_sys_close+0x79/0xd0 [ 26.554344] do_syscall_64+0x117/0x6b0 [ 26.554351] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 26.554358] RIP: 0033:0x7f938c067727 [ 26.554364] Code: 48 89 fa 4c 89 df e8 28 ad 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5bf [ 26.554369] RSP: 002b:00007fff49f05980 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 [ 26.554376] RAX: ffffffffffffffda RBX: 00007f938bfd7780 RCX: 00007f938c067727 [ 26.554380] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 [ 26.554383] RBP: 00007fff49f05a10 R08: 0000000000000000 R09: 0000000000000000 [ 26.554386] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 [ 26.554389] R13: 00007fff49f05b40 R14: 00007f938c207000 R15: 000055c148471d78 [ 26.554397] </TASK> [ 26.554399] [ 26.575612] Allocated by task 100: [ 26.575871] kasan_save_stack+0x24/0x50 [ 26.576157] kasan_save_track+0x14/0x30 [ 26.576418] __kasan_kmalloc+0x7f/0x90 [ 26.576668] __kmalloc_noprof+0x281/0x6c0 [ 26.576938] nvme_alloc_ns+0x7f7/0x3170 [ 26.577206] nvme_scan_ns+0x508/0x880 [ 26.577449] async_run_entry_fn+0x8c/0x350 [ 26.577723] process_scheduled_works+0xb6f/0x1a00 [ 26.578034] worker_thread+0x4ad/0xb40 [ 26.578283] kthread+0x34f/0x450 [ 26.578501] ret_from_fork+0x563/0x800 [ 26.578752] ret_from_fork_asm+0x1a/0x30 [ 26.579012] [ 26.579124] Freed by task 237: [ 26.579335] kasan_save_stack+0x24/0x50 [ 26.579596] kasan_save_track+0x14/0x30 [ 26.579855] kasan_save_free_info+0x3a/0x60 [ 26.580131] __kasan_slab_free+0x43/0x70 [ 26.580388] kfree+0x321/0x500 [ 26.580591] nvme_ns_head_chr_release+0x39/0x50 [ 26.580883] __fput+0x352/0xa70 [ 26.581095] fput_close_sync+0xd8/0x190 [ 26.581350] __x64_sys_close+0x79/0xd0 [ 26.581595] do_syscall_64+0x117/0x6b0 [ 26.581842] entry_SYSCAL ---truncated--- | ||||
| CVE-2026-98823 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: preserve hidden-group beacon IE ownership A hidden-group probe-response entry borrows its beacon IEs from the group's beacon entry. cfg80211_update_assoc_bss_entry() can pass such an entry to cfg80211_update_known_bss() when merging scan entries after a channel switch. Copying the borrowed beacon_ies into the associated entry gives the same allocation two owners. Releasing the group's beacon entry can then leave the associated entry pointing to freed IEs, which are freed again when that entry is released. Skip beacon IE replacement when the source entry belongs to a hidden group. Preserve probe-response processing, the subsequent metadata updates, and the existing rejection path for conflicting hidden beacon updates. | ||||
| CVE-2026-98827 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: bound TX aggregation to MAX_TX_BUF_SIZE __hif_usb_tx() dequeues up to MAX_TX_AGGR_NUM (20) frames into a single tx_buf of MAX_TX_BUF_SIZE (32768) bytes, limiting the batch by record count but never by cumulative byte length. With large frames (MTU 2304), 20 aggregated frames of 2292 bytes each exceed the allocation (20 * 2296 = 45920 bytes), so the memcpy() in the loop writes up to 13152 bytes past tx_buf->buf before usb_submit_urb(). Peek the queue head and stop before copying any record that would cross MAX_TX_BUF_SIZE, then dispatch the current batch. Leftover skbs remain queued and are drained on the next URB completion. The byte bound changes the loop's exit semantics: it can now exit before i == tx_skb_cnt - 1. Stock only finalized tx_buf->len on that last index (len += offset), so an early break would submit a URB holding only the last record's length while every dequeued skb is freed on completion, silently dropping frames. Make tx_buf->len a running total and advance tx_buf->offset per record instead; the stride round_up(nskb->len + 4, 4) is identical to the stock stride when the loop runs to completion. Tested on hardware with an MTU 2304 flood: the loop stops at record 15 (len = 32144, offset = 32144, within 32768), no oversized URB is submitted, and MTU 1500 pings pass 20/20. | ||||
| CVE-2026-110768 | 1 Holaboss-ai | 1 Holaos | 2026-10-24 | 4.8 Medium |
| holaOS through 2026.822.1 contains an authorization bypass vulnerability in the channel-gateway Telegram connector that authorizes senders by mutable username rather than only numeric id. Attackers who register a released username listed in allowFrom can submit turns to the bound workspace agent, which runs configured tools on the operator's machine. | ||||
| CVE-2026-106706 | 1 Xuxueli | 1 Xxl-job | 2026-10-24 | 5.4 Medium |
| XXL-JOB through 3.5.0-SNAPSHOT is vulnerable to stored cross-site scripting (XSS) in the GLUE code editor. JobCodeController.save() stores the user-supplied glueSource parameter without output encoding, and the FreeMarker template job.code.ftl renders the stored value unescaped. | ||||
| CVE-2026-98794 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: filter some flags received in the backup server While the IPVS SYNC protocol is not secure by design we can still protect the backup server from messages that can wreak havoc. This commit addresses problems from received connection flags or their combinations. We now drop messages as follows: 1. the NO_CPORT+TEMPLATE combination allows lookups for normal connections to hit template which can break in many ways. While the master does not sync connections with NO_CPORT flag, i.e. before they are established, we still accept NO_CPORT without TEMPLATE. 2. ONE_PACKET: it is not sent by master, so we do not expect it in backup. Before now it was ignored by IP_VS_CONN_F_BACKUP_MASK for protocol v1 while protocol v0 created connections that are not hashed and dropped immediately. Better to apply the IP_VS_CONN_F_BACKUP_MASK also to the flags from v0 messages for consistency with v1. | ||||
| CVE-2026-98797 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: cap skb->queue_mapping when the tx queue is picked skbedit can set skb->queue_mapping and raise the per-CPU skip_txqueue flag so __dev_queue_xmit() honours the mapping. __dev_queue_xmit() cleared the flag before sch_handle_egress() and only read it afterwards, so the flag was not confined to the xmit that set it: a nested xmit (mirred redirect or mirror, or a drop after skbedit) could set the flag and the outer xmit would consume it for an skb that never went through skbedit. A forwarded packet still carries the ingress NIC's rx_queue + 1 in skb->queue_mapping, so the outer device then indexes its tx queue state with that stale value. Taprio's child array q->qdiscs[] is sized to the device's queue count, so taprio_enqueue() indexes past its allocation and dereferences the result as a struct Qdisc *. We (ab)use the skb->nf_skip_egress which means "skip netfilter egress for this packet" to tag to "am I in tc egress?". Despite the overload I dont see it as a conflict since the marker is set only around the single sch_handle_egress() call and ingress path is guarded by tc_at_ingress. I will send a followup(net-next) patch once this hits net-next to rename the skb->nf_skip_egress bit/flag to skb->skip_egress Arm the flag only from the egress classifier that can use it: raise skip_txqueue from tcf_skbedit_act() only when it runs inside sch_handle_egress(), thanks to skb->nf_skip_egress. An egress qdisc classifier runs in q->enqueue(), after the tx queue has been picked, so a mapping it sets cannot affect the current packet; arming the flag there only pollutes it for a later xmit. Then own the flag for the xmit frame the egress hook runs in: save the incoming value and clear it just before sch_handle_egress(), and restore it after the hook - on the consumed (drop) path, or, in the same call that reads it, on the surviving path. The save and the restores stay inside the egress_needed_key static branch, so a packet pays for them only when egress hooks are active (2f1e85b1aee4). Store the value netdev_cap_txqueue() selected back into skb->queue_mapping in netdev_tx_queue_mapping(), as netdev_core_pick_tx() already does, so the skip_txqueue path never hands a later reader on the xmit path a mapping the device cannot serve. A store made still later in the same frame, by a tc BPF program attached to a transmit qdisc, is outside this path and is not re-capped; a separate followup will resolve that path. netdev_xmit_skip_txqueue() returns the previous flag value so the save-and-clear is one call, and a no-op stub is provided when CONFIG_NET_EGRESS is disabled. skb->nf_skip_egress is compiled under CONFIG_NET_EGRESS rather than CONFIG_NETFILTER_SKIP_EGRESS, so skb_at_tc_egress() is valid whenever the egress path is built. A local user in a network namespace can redirect a packet from a device with more TX queues to one with fewer after setting a mapping valid only on the larger device. That reaches these reads and, under KASAN, faults with "slab-out-of-bounds in taprio_enqueue". Conditions to recreate the bug: the report's own trigger is a local user with CAP_NET_ADMIN in a network namespace, so no eBPF program is needed. With CONFIG_NET_SCH_TAPRIO=y, CONFIG_NET_ACT_SKBEDIT=y, CONFIG_NET_ACT_MIRRED=y, CONFIG_NET_CLS_MATCHALL=y, CONFIG_NET_SCH_PRIO=y and KASAN enabled, create qa (3 queues), qb (2 queues) and qc (1 queue) as dummy devices; put a taprio root on qb (num_tc 1, queues 2@0) and clsact on all three; then add an egress matchall filter on every device. On qa: "action skbedit queue_mapping 2 pipe action mirred egress redirect dev qb". On qb: "action mirred egress mirror dev qc". On qc: "action skbedit queue_mapping 0 pipe". Send one packet out qa. qc's skbedit sets the flag while qb's outer xmit is in flight; without the fix qb consumes it and reads its two-entry taprio child array with the forwarded packet's stale mapping. A qc whose skb ---truncated--- | ||||
| CVE-2026-98799 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Skip detached progs in trampoline images that are still in use bpf_tramp_image_put() makes sure a trampoline image is not freed while a task may still be running in it, but nothing similar is done for the progs called by that image. Detach drops the last prog reference right away and the prog is freed after grace periods, on the basis that a task still in the traced function skips the fexit progs once the nop at ip_after_call is patched to a jump. That leaves out a task sleeping in a sleepable prog that runs before the detached one, which no grace period waits for: CPU 0 CPU 1 in image I, sleeping in prog S detach P from I's trampoline -> new image, bpf_tramp_image_put(I) bpf_prog_put(P), last ref grace periods, P freed back from S __bpf_prog_enter(P) call P->bpf_func If S and P are fexit progs the task is already past the patched jump, and fentry only images don't have one. On x86 this is an int3 in poisoned bpf_prog_pack memory: Oops: int3: 0000 [#1] SMP NOPTI CPU: 18 UID: 0 PID: 94573 Comm: x169 Not tainted 6.18.44 #1 PREEMPT(lazy) RIP: 0010:0xffffffffc0601d8d Call Trace: <TASK> ? bpf_trampoline_6442515411+0x1a4/0x21b bpf_lsm_bprm_committed_creds+0x5/0x10 security_bprm_committed_creds+0x5f/0x70 begin_new_exec+0x2d6/0x410 ... We hit this in production when progs attached through trampolines got detached while their hooks were busy, and it was independently found with a fuzzer and KASAN. Have the JITs emit a patchable nop in front of each prog call sequence and record it in the image. When a prog is detached, patch its nop to a jump over the call sequence. Progs that stay attached keep running for the tasks that are in the image, and ip_after_call isn't needed anymore. The task can be in any image that isn't freed yet, not only in the current one. It sleeps in image I1 that calls S, P and Q, then P is detached and the trampoline moves to image I2, then Q is detached and its call is still in I1. So the trampoline keeps a list of its images until they are freed, and detaching a prog patches its nop in all of them. Images hold a reference on the trampoline for that long. On riscv and loongarch a jump of any range takes several instructions, and a task preempted in the middle of them could resume into half of the new sequence. The nop is a single instruction there, patched to a near branch through arch_bpf_trampoline_skip(). With the extra nops, BPF_MAX_TRAMP_LINKS progs no longer fit in a page on x86 and arm64 (and already didn't on powerpc), so lower the limit there like s390 does. | ||||
| CVE-2026-98802 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: seg6: ensure packet data is writable before modifying SRH and IPv6 DA advance_nextseg() modifies the SRH Segments Left field and the IPv6 destination address without ensuring the packet data is writable. seg6_next_csid_advance_arg() has the same problem when it advances the NEXT-C-SID argument in the destination address. The skb may be cloned, for example by an AF_PACKET socket receiving on the ingress device. advance_nextseg() and seg6_next_csid_advance_arg() then write into the packet data shared with the clone. A read from that socket can return the modified packet instead of the received one. The simplified path below shows this for advance_nextseg(): __netif_receive_skb_one_core __netif_receive_skb_core deliver_skb [orig: users=2, cloned=0] packet_rcv skb_clone clone queued to the AF_PACKET socket consume_skb(orig) [orig: users=1, cloned=1] ipv6_rcv ip6_rcv_core skb_share_check: no-op [orig: users=1] [...] input_action_end_core advance_nextseg writes into the data shared with the clone Call skb_ensure_writable() in advance_nextseg() and in seg6_next_csid_advance_arg() before they modify the packet data. skb_ensure_writable() may reallocate skb->head, which invalidates the pointers into the packet data taken before the call. advance_nextseg() now returns a valid SRH pointer, or NULL if skb_ensure_writable() fails. seg6_next_csid_advance_arg() takes the pointer to the destination address from the skb after skb_ensure_writable(). On failure, the callers drop the packet with SKB_DROP_REASON_NOMEM. | ||||
| CVE-2026-98805 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: prevent GCM nonce reuse on peer key changes TIPC can encrypt traffic between nodes using a different transmit key for each node. In this mode, the AES-GCM nonce for a packet sent to a known peer consists of a 32-bit prefix (a per-key salt XOR the peer's address) followed by a 64-bit counter. That counter is stored in the peer's RX crypto object. When the peer reports a change in which key it uses to receive packets, TIPC resets this counter. The sender can still be using the same TX key and salt, so subsequent packets reuse earlier nonces. This nonce reuse breaks confidentiality and exposes GCM's authentication key. This makes forgeries trivial: an attacker can exploit CTR malleability to alter captured ciphertexts and use the recovered authentication key to compute a valid tag for the modified ciphertext, under the same key and nonce. Use the TX key's existing aead->seqno counter instead. All encryptions using that key object share the same atomic counter, so concurrent encryptions get distinct nonce counter values. The counter survives key activation and peer reconnection, and peer key-status reports cannot reset it. This prevents those transitions from causing nonce reuse while the same TX key remains installed. The nonce format is unchanged, and receivers do not require consecutive counter values, so sharing the counter across peers remains compatible with existing receivers. A pre-existing check still invokes key revocation in the unlikely event that the counter wraps to zero. | ||||
| CVE-2026-98829 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drop oversized fragments to avoid extra_len overflow In ieee80211_rx_h_defragment(), fragment payloads are accumulated into entry->extra_len as subsequent fragments arrive: entry->extra_len += rx->skb->len; When the final fragment arrives, the head fragment is dequeued, and pskb_expand_head() is called with entry->extra_len to ensure sufficient tailroom for all queued fragments before copying: if (skb_tailroom(rx->skb) < entry->extra_len) { if (unlikely(pskb_expand_head(rx->skb, 0, entry->extra_len, GFP_ATOMIC))) { ... } } while ((skb = __skb_dequeue(&entry->skb_list))) { skb_put_data(rx->skb, skb->data, skb->len); dev_kfree_skb(skb); } In commit 69f132236827 ("mac80211: shrink struct ieee80211_fragment_entry"), entry->extra_len was narrowed from unsigned int to u16 in order to reduce structure memory footprint. However, an IEEE 802.11 frame sequence can contain up to 16 fragments (frag numbers 0..15). If a sequence of large fragments arrives (e.g. from a malicious peer or rogue AP), the sum of fragment lengths can exceed 65535 bytes (for example, 15 fragments of 4400 bytes total 66000 bytes). Because extra_len is a u16, this addition overflows and wraps around modulo 65536 (e.g. 66000 wraps to 464). Consequently, pskb_expand_head() allocates only the truncated amount of tailroom (or is skipped entirely if the head fragment already has >= 464 bytes of tailroom). When skb_put_data() subsequently iterates through the queued skb list, it appends the full payload into the undersized buffer, causing skb_put() to trigger skb_over_panic() and crash the kernel in softirq context. A legitimate MSDU in IEEE 802.11 is at most 2304 bytes (or up to 7935/11454 bytes for A-MSDU, which is not fragmented), well below U16_MAX. Fix this without increasing the size of struct ieee80211_fragment_entry by checking whether adding the incoming fragment length would exceed U16_MAX. If so, purge the queued fragments and drop the frame. [assign a separate drop reason] | ||||
| CVE-2026-98831 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: of/overlay: don't leak fragment references when changeset init fails init_overlay_changeset() stores the number of initialized fragments in ovcs->count only on full success. When find_target() or the __symbols__ lookup fails partway through, the target and overlay references taken for the fragments initialized so far are never dropped: free_overlay_changeset() bounds its cleanup loop by ovcs->count, which is still 0. Store the running count on the error path so free_overlay_changeset() puts whatever was set up. The store is guarded by ovcs->fragments because on the allocation-failure path cnt still holds the counting pass total while there is no fragments array; everywhere else cnt only counts fully-initialized fragments. | ||||
| CVE-2026-98835 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kionix-kx022a: Fix array boundary check The driver performs a sanity check for an array size, when converting a register value to an array index. The check incorrectly accepts the sizeof(array) as a last index, when last valid index should be sizeof(array) - 1. Fix the check by bailing out when index >= sizeof(array). | ||||