| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Apache Pulsar's MultiRolesTokenAuthorizationProvider authorizes a client with all roles listed in a claim of its JSON Web Token (JWT). The provider is intended for use with token authentication, which verifies the token before authorization. The provider did not verify the token itself: it parsed the token's claims with the signature removed and trusted that authentication had already checked it.
When authentication and authorization are enabled with a non-empty anonymousUserRole setting, some HTTP requests whose credentials fail authentication are not rejected, but are handled as requests of the anonymous user role. For the broker's HTTP endpoints, such as the admin REST API, this fallback applies to requests that do not name an authentication method and requires strictAuthMethod to be false (the default) where that setting is available. For the WebSocket API, failed credentials can also fall back to the anonymous user role; this path does not enforce strictAuthMethod. The authentication data kept for such a request still contained the request's Authorization header. MultiRolesTokenAuthorizationProvider then read the bearer token from that header without verifying its signature and authorized the request with the roles in the token's role claim.
As a result, in deployments that use MultiRolesTokenAuthorizationProvider together with a non-empty anonymousUserRole and that permit this fallback, an unauthenticated client can send an HTTP request, for example to the admin REST API or the WebSocket API, with a forged or unsigned token that lists arbitrary roles, and be authorized with those roles. The impact can include super-user access when the token lists a role configured in superUserRoles, allowing the client to read and change tenants, namespaces, topics, permissions and broker configuration. No valid credentials are required.
Deployments are not affected if they use the default authorization provider (PulsarAuthorizationProvider) or another authorization provider, or if anonymousUserRole is not set (the default). Requests that authenticate successfully with a valid token are not affected, because the token that MultiRolesTokenAuthorizationProvider reads is the token that authentication verified. Connections that use the Pulsar binary protocol are not affected by this issue, because the broker does not keep client authentication data for connections that it assigns to the anonymous user role.
In fixed versions, MultiRolesTokenAuthorizationProvider obtains roles only from tokens that the configured token authentication provider has verified, using its configured keys and validation settings. Broker HTTP requests that are assigned to the anonymous user role are authorized only as that role, and invalid tokens cannot supply additional roles to WebSocket requests. The broker fails to start if MultiRolesTokenAuthorizationProvider is configured with authorization enabled but without a token authentication provider.
This issue affects Apache Pulsar versions from 2.8.1 before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who cannot upgrade immediately can remove the anonymousUserRole setting from the broker and WebSocket service configurations, or restrict network access to the HTTP endpoints of these services to trusted clients. |
| The Pulsar broker serves two schema commands on its binary protocol: GetSchema, which returns the schema registered for a topic, and GetOrCreateSchema, which registers a new schema version for an existing topic. The broker handled both commands after checking only that the client connection was authenticated. Unlike the broker's other topic commands, such as those for creating producers and consumers or for looking up topics, these two commands did not check whether the authenticated client was authorized for the target topic. The Pulsar REST API endpoints for schemas were not affected.
An authenticated client without any permission on the target topic, namespace or tenant could use these commands to:
- read the schema registered for a topic in another namespace or tenant, disclosing the schema definition such as record field names and types. Message payloads are not disclosed.
- register a new schema version on an existing topic in another namespace or tenant. The topic's schema compatibility and schema auto-update policies still apply. The issue does not allow message data to be read or modified, but a registered schema version can cause legitimate producers and consumers of that topic to fail with schema incompatibility errors until the schema is corrected by an administrator.
The standard Pulsar client performs an authorized topic lookup before it sends these commands, so the missing check could not be observed when testing with the standard client. A client that implements the binary protocol directly is not required to perform that lookup first.
This issue is relevant only to deployments that have authentication and authorization enabled. The GetSchema command is affected from Apache Pulsar 2.2.0, and the GetOrCreateSchema command from Apache Pulsar 2.5.0. After the fix, the broker requires the lookup permission on the topic for GetSchema and the produce permission on the topic for GetOrCreateSchema. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different.
This issue affects Apache Pulsar versions from 2.2.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. |
| The Apache Pulsar WebSocket service allows a WebSocket consumer to configure a dead letter policy through query parameters of the consumer endpoint, including the deadLetterTopic parameter that names the topic to which messages are written after the maximum number of redeliveries is exceeded. When authorization is enabled, the WebSocket service checks only that the connecting user holds the CONSUME permission on the subscribed topic. It does not check whether the user holds the PRODUCE permission on the topic named in deadLetterTopic. The dead letter messages are then written by the WebSocket service using its own broker client identity rather than the identity of the connecting user.
As a result, an authenticated user who holds the CONSUME permission on at least one topic can cause messages to be written to a topic of their choosing in any existing namespace, including namespaces belonging to other tenants, provided the role used by the WebSocket service to connect to the brokers is authorized to produce to that topic and the topic accepts a producer that registers no schema. The dead letter producer created by the WebSocket service registers no schema, so it is rejected when the target topic has a schema and schema validation is enforced for that topic or its namespace; this setting is not enabled by default. The same user is refused when attempting to produce to that topic directly. Where automatic topic creation is enabled, which is the default, the named topic is created if it does not already exist. The issue can only be triggered when the WebSocket service is enabled, either in the broker (webSocketServiceEnabled, which is disabled by default) or as a standalone WebSocket proxy.
The impact is unauthorized injection of messages into topics the user is not permitted to produce to. The user can determine the content of the injected messages when they also control the messages on the subscribed topic. The issue does not allow reading, modifying or deleting existing messages in the target topic. Injected messages carry the dead letter message properties and a dead letter producer name, so they can be distinguished from messages produced normally; however, the values of these properties are not authenticated and should not be relied upon to establish the origin of a message. Whether an injected message has further consequences depends on how the applications consuming the target topic process it. Repeated injection also consumes storage and backlog capacity in the target namespace.
This issue affects Apache Pulsar versions from 2.3.0 before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who cannot upgrade immediately and do not require the WebSocket service should disable it. Where the WebSocket service is required, restricting network access to it and limiting the permissions granted to the role the WebSocket service uses to connect to the brokers to the namespaces WebSocket clients are intended to access reduces the exposure. |
| When package management is enabled, Pulsar Functions, Sources and Sinks can be registered or updated from a package stored in the Pulsar Packages Management Service by supplying a package URL. The Pulsar Functions worker authorized these requests only against the namespace in which the component was being registered or updated. It did not check whether the requesting user was permitted to access packages in the namespace that the package URL refers to, and it retrieved the package from the broker using the worker's own credentials. The permission check of the Packages Management Service was therefore applied to the worker's identity instead of the requesting user's. Package URLs of transform functions supplied when registering or updating a sink were handled in the same way.
An authenticated user who is permitted to register or update functions, sources or sinks in any namespace of their own tenant could use this to obtain the contents of a package stored in a namespace of another tenant, without having the packages permission on that namespace. The impact is limited to disclosure of package contents, which may include application code, business logic or embedded credentials. The issue does not allow packages to be modified or deleted and does not affect availability.
This issue only affects deployments that have authentication and authorization enabled and in which package management has been enabled: the broker setting enablePackagesManagement and, in current releases, the functions worker setting functionsWorkerEnablePackageManagement. Both settings are disabled by default.
This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. |
| The Apache Pulsar broker exposes a transaction administration REST API under /admin/v3/transactions. When authentication and authorization are enabled, most of the read endpoints of this API verify only that the request is authenticated and that the broker serves the requested topic or transaction coordinator. They do not check whether the caller is permitted to access the tenant, namespace or topic whose data is returned. The endpoints that modify state, which abort a transaction or scale the transaction coordinators, correctly require super-user access and are not affected.
As a result, any authenticated user, including one that has been granted no permissions, can read transaction coordinator and transaction information belonging to other tenants. This includes the list of transaction coordinators with the broker service URLs that serve them, transaction coordinator statistics and internal statistics, transaction metadata including the names of the topics and subscriptions a transaction involves and the principal that opened it, the list of long-running transactions on a transaction coordinator, transaction buffer and pending acknowledgement statistics and internal statistics for any topic and subscription, and whether a given message position of a subscription is currently held in a pending transactional acknowledgement.
The disclosure of transaction metadata and statistics can only occur when transaction support is enabled in the broker (transactionCoordinatorEnabled, which is disabled by default). When transaction support is disabled, these endpoints return no transaction data; the only residual effect is that one endpoint's error response can reveal whether a named topic exists in another tenant.
The impact is limited to disclosure of transaction-related metadata and statistics across tenant boundaries. The issue does not allow reading message contents, modifying or aborting transactions, or changing any configuration.
This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who cannot upgrade immediately and do not use Pulsar transactions should keep transaction support disabled. Where transactions are required, restricting network access to the broker's admin HTTP endpoints to trusted administrative clients reduces the exposure. |
| The Apache Pulsar broker admin REST API provides endpoints to read, set and remove the topic-level entry filter policy of a topic. For persistent topics these endpoints check that the caller is authorized for the entry filters topic policy operation. The corresponding endpoints for non-persistent topics (/admin/v2/non-persistent/{tenant}/{namespace}/{topic}/entryFilters) do not perform this authorization check. The only authorization check these endpoints perform is an indirect lookup permission check, made while the topic's partition metadata is retrieved; it is present in all affected versions.
As a result, when authentication and authorization are enabled, an authenticated user who has been granted produce or consume permission on a non-persistent topic, or on its namespace, but not permission to manage the topic's policies can read, replace or remove the topic-level entry filter policy of that topic. These operations should be restricted to users with the tenant admin role or the superuser role. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different.
The practical impact is limited by two broker configuration requirements, neither of which is met by default:
- Entry filters must have been installed by the operator. Entry filter implementations are loaded only at broker startup from the broker's entry filters directory, which is empty by default. A request can only select among entry filters the operator has already deployed; setting any other filter name is rejected. The issue does not allow a caller to install or load entry filter code or to run arbitrary code in the broker.
- Topic-level entry filter policies must be allowed to override the broker-level configuration (allowOverrideEntryFilters, which is disabled by default). When this setting is disabled, the topic-level entry filter policy has no effect on message dispatch.
In deployments where both conditions are met, an unauthorized user can remove the topic-level entry filter policy of a non-persistent topic, for example one used to restrict which messages are delivered to consumers, or apply a different installed entry filter that withholds messages from subscriptions of that topic. Removing it makes the topic fall back to the namespace-level or broker-level entry filters, which are not removed. A changed policy affects only subscription dispatchers created after the change, for example for new subscriptions or when a subscription is re-created after all of its consumers have disconnected; dispatchers that already exist keep the entry filters they were created with. Because non-persistent topics do not store messages, messages withheld by an entry filter are not delivered. Reading the policy discloses only the names of the configured entry filters. The issue does not allow reading message contents, and entry filters cannot modify message payloads. Persistent topics and namespace-level entry filter policies are not affected. Apache Pulsar versions before 3.3.0 are not affected, because in those versions the entry filters topic policy check is made in code shared by the persistent and non-persistent endpoints.
This issue affects Apache Pulsar versions from 3.3.0 before 4.0.14 and from 4.1.0 before 4.2.5.
- 3.3.x and 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.
Users who cannot upgrade immediately and have deployed entry filters should keep allowOverrideEntryFilters at its default value of false, so that topic-level entry filter policies do not affect message dispatch. |
| Apache Pulsar Manager is a web console for administering Apache Pulsar clusters. It has its own user accounts and login, and it can be configured with an HTTP authentication credential, such as a token, that it uses to call the Pulsar admin API on behalf of its users. Pulsar Manager has the following security issues:
- The operation for creating the initial administrator (superuser) account is available without authentication, and it remains available after the instance has been initialized. Anyone who can reach Pulsar Manager can create an additional administrator account at any time and log in with it. This issue affects versions 0.3.0 and later.
- Requests to the Pulsar admin API that Pulsar Manager proxies to the configured Pulsar cluster are not subject to Pulsar Manager's authentication. Version 0.2.0 checks the caller's permissions for some of these requests, but not for all of them. An unauthenticated user can therefore use Pulsar Manager to send requests to the Pulsar admin API, which the cluster processes with the credential configured in Pulsar Manager.
- The destination of a proxied request can be chosen by the requester, and Pulsar Manager attaches its configured Pulsar admin credential to the request. An unauthenticated user can make Pulsar Manager send this credential to a host of the user's choosing, and the credential can then be used directly against the Pulsar cluster.
- In versions 0.3.0 and later, Pulsar Manager does not distinguish between privilege levels of its accounts. Every account, including one created through the first issue, effectively has full administrative privileges in Pulsar Manager.
The impact depends on the version and the deployment. In versions 0.3.0 and later, any user who can reach Pulsar Manager over the network can take full control of Pulsar Manager. In all versions, when Pulsar Manager is configured with an HTTP authentication credential for a Pulsar cluster, any user who can reach Pulsar Manager can perform the Pulsar admin operations that this credential permits and can obtain the credential itself. When Pulsar Manager is configured with the token signing key of a Pulsar cluster, an administrator of Pulsar Manager can create tokens for the cluster.
Apache Pulsar Manager is no longer maintained and is completely unsupported. The Apache Pulsar PMC has retired it. There are no supported versions, and no further releases, fixes or security updates will be made for any version. These issues will not be fixed.
Using Pulsar Manager is not recommended. Users should stop using Pulsar Manager, remove existing deployments, and move to one of the alternatives described in the Administration UI documentation (https://pulsar.apache.org/docs/administration-ui). Users who have exposed Pulsar Manager configured with a Pulsar credential or token signing key should also consider replacing that credential or key.
Until a deployment is removed, users should not expose Pulsar Manager to untrusted networks, and should restrict network access to it to trusted administrators. |
| The Pulsar Packages Management Service can be configured to store packages on the local filesystem of the broker by using the filesystem storage provider. Package names consist of a type, tenant, namespace, name and version. Authorization of package operations is based only on the tenant and namespace, while the storage location of a package is derived from all of these components. The version component of a package name was not validated, so it could contain URL-encoded path separators and parent directory references. The filesystem storage provider resolved such a version to a location belonging to a package in a different tenant or namespace. Because that location is inside the configured storage directory, the containment check that the filesystem storage provider performs in recent releases did not prevent the access.
An authenticated user who has the packages permission on any namespace could use this to download, overwrite or delete packages stored in other tenants or namespaces for which the user has no permission. Packages overwritten or deleted in this way may be used by Pulsar Functions, Sources or Sinks, so the issue can affect the integrity and availability of these components. If authentication is disabled, the operations are available to any client that can reach the broker's admin REST API.
This issue only affects deployments in which package management is enabled with the broker setting enablePackagesManagement and the filesystem storage provider (FileSystemPackagesStorageProvider) is configured with the setting packagesManagementStorageProvider. Package management is disabled by default, and the default storage provider, which stores packages in Apache BookKeeper, is not affected.
This issue affects Apache Pulsar versions from 2.10.0 before 4.0.14 and from 4.1.0 before 4.2.5.
- 4.0.x version users should upgrade to at least 4.0.14.
- 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. |
| Apache Pulsar contains multiple connectors for integrating with Apache Kafka. The Pulsar IO Apache Kafka Source Connector, Sink Connector, and Kafka Connect Adaptor Sink Connector log sensitive configuration properties in plain text in application logs.
This vulnerability can lead to unintended exposure of credentials in log files, potentially allowing attackers with access to these logs to obtain Apache Kafka credentials. The vulnerability's impact is limited by the fact that an attacker would need access to the application logs to exploit this issue.
This issue affects Apache Pulsar IO's Apache Kafka connectors in all versions before 3.0.11, 3.3.6, and 4.0.4.
3.0.x version users should upgrade to at least 3.0.11.
3.3.x version users should upgrade to at least 3.3.6.
4.0.x version users should upgrade to at least 4.0.4.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. |
| TLS hostname verification cannot be enabled in the Pulsar Broker's Java Client, the Pulsar Broker's Java Admin Client, the Pulsar WebSocket Proxy's Java Client, and the Pulsar Proxy's Admin Client leaving intra-cluster connections and geo-replication connections vulnerable to man in the middle attacks, which could leak credentials, configuration data, message data, and any other data sent by these clients. The vulnerability is for both the pulsar+ssl protocol and HTTPS. An attacker can only take advantage of this vulnerability by taking control of a machine 'between' the client and the server. The attacker must then actively manipulate traffic to perform the attack by providing the client with a cryptographically valid certificate for an unrelated host. This issue affects Apache Pulsar Broker, Proxy, and WebSocket Proxy versions 2.7.0 to 2.7.4; 2.8.0 to 2.8.3; 2.9.0 to 2.9.2; 2.10.0; 2.6.4 and earlier. |
| Delayed TLS hostname verification in the Pulsar Java Client and the Pulsar Proxy make each client vulnerable to a man in the middle attack. Connections from the Pulsar Java Client to the Pulsar Broker/Proxy and connections from the Pulsar Proxy to the Pulsar Broker are vulnerable. Authentication data is sent before verifying the server’s TLS certificate matches the hostname, which means authentication data could be exposed to an attacker. An attacker can only take advantage of this vulnerability by taking control of a machine 'between' the client and the server. The attacker must then actively manipulate traffic to perform the attack by providing the client with a cryptographically valid certificate for an unrelated host. Because the client sends authentication data before performing hostname verification, an attacker could gain access to the client’s authentication data. The client eventually closes the connection when it verifies the hostname and identifies the targeted hostname does not match a hostname on the certificate. Because the client eventually closes the connection, the value of the intercepted authentication data depends on the authentication method used by the client. Token based authentication and username/password authentication methods are vulnerable because the authentication data can be used to impersonate the client in a separate session. This issue affects Apache Pulsar Java Client versions 2.7.0 to 2.7.4; 2.8.0 to 2.8.3; 2.9.0 to 2.9.2; 2.10.0; 2.6.4 and earlier. |
| Improper Input Validation vulnerability in Proxy component of Apache Pulsar allows an attacker to make TCP/IP connection attempts that originate from the Pulsar Proxy's IP address. When the Apache Pulsar Proxy component is used, it is possible to attempt to open TCP/IP connections to any IP address and port that the Pulsar Proxy can connect to. An attacker could use this as a way for DoS attacks that originate from the Pulsar Proxy's IP address. It hasn’t been detected that the Pulsar Proxy authentication can be bypassed. The attacker will have to have a valid token to a properly secured Pulsar Proxy. This issue affects Apache Pulsar Proxy versions 2.7.0 to 2.7.4; 2.8.0 to 2.8.2; 2.9.0 to 2.9.1; 2.6.4 and earlier. |
| Apache Pulsar Brokers and Proxies create an internal Pulsar Admin Client that does not verify peer TLS certificates, even when tlsAllowInsecureConnection is disabled via configuration. The Pulsar Admin Client's intra-cluster and geo-replication HTTPS connections are vulnerable to man in the middle attacks, which could leak authentication data, configuration data, and any other data sent by these clients. An attacker can only take advantage of this vulnerability by taking control of a machine 'between' the client and the server. The attacker must then actively manipulate traffic to perform the attack. This issue affects Apache Pulsar Broker and Proxy versions 2.7.0 to 2.7.4; 2.8.0 to 2.8.3; 2.9.0 to 2.9.2; 2.10.0; 2.6.4 and earlier. |
| The Apache Pulsar C++ Client does not verify peer TLS certificates when making HTTPS calls for the OAuth2.0 Client Credential Flow, even when tlsAllowInsecureConnection is disabled via configuration. This vulnerability allows an attacker to perform a man in the middle attack and intercept and/or modify the GET request that is sent to the ClientCredentialFlow 'issuer url'. The intercepted credentials can be used to acquire authentication data from the OAuth2.0 server to then authenticate with an Apache Pulsar cluster. An attacker can only take advantage of this vulnerability by taking control of a machine 'between' the client and the server. The attacker must then actively manipulate traffic to perform the attack. The Apache Pulsar Python Client wraps the C++ client, so it is also vulnerable in the same way. This issue affects Apache Pulsar C++ Client and Python Client versions 2.7.0 to 2.7.4; 2.8.0 to 2.8.3; 2.9.0 to 2.9.2; 2.10.0 to 2.10.1; 2.6.4 and earlier. Any users running affected versions of the C++ Client or the Python Client should rotate vulnerable OAuth2.0 credentials, including client_id and client_secret. 2.7 C++ and Python Client users should upgrade to 2.7.5 and rotate vulnerable OAuth2.0 credentials. 2.8 C++ and Python Client users should upgrade to 2.8.4 and rotate vulnerable OAuth2.0 credentials. 2.9 C++ and Python Client users should upgrade to 2.9.3 and rotate vulnerable OAuth2.0 credentials. 2.10 C++ and Python Client users should upgrade to 2.10.2 and rotate vulnerable OAuth2.0 credentials. 3.0 C++ users are unaffected and 3.0 Python Client users will be unaffected when it is released. Any users running the C++ and Python Client for 2.6 or less should upgrade to one of the above patched versions. |
| The vulnerability allows authenticated users with only produce or consume permissions to modify topic-level policies, such as retention, TTL, and offloading settings. These management operations should be restricted to users with the tenant admin role or super user role.
This issue affects Apache Pulsar versions from 2.7.1 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0.
2.10 Apache Pulsar users should upgrade to at least 2.10.6.
2.11 Apache Pulsar users should upgrade to at least 2.11.4.
3.0 Apache Pulsar users should upgrade to at least 3.0.3.
3.1 Apache Pulsar users should upgrade to at least 3.1.3.
3.2 Apache Pulsar users should upgrade to at least 3.2.1.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. |
| Improper input validation in the Pulsar Function Worker allows a malicious authenticated user to execute arbitrary Java code on the Pulsar Function worker, outside of the sandboxes designated for running user-provided functions. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true".
This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0.
2.10 Pulsar Function Worker users should upgrade to at least 2.10.6.
2.11 Pulsar Function Worker users should upgrade to at least 2.11.4.
3.0 Pulsar Function Worker users should upgrade to at least 3.0.3.
3.1 Pulsar Function Worker users should upgrade to at least 3.1.3.
3.2 Pulsar Function Worker users should upgrade to at least 3.2.1.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. |
| This vulnerability allows authenticated users with produce or consume permissions to perform unauthorized operations on partitioned topics, such as unloading topics and triggering compaction. These management operations should be restricted to users with the tenant admin role or superuser role. An authenticated user with produce permission can create subscriptions and update subscription properties on partitioned topics, even though this should be limited to users with consume permissions. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different. Additionally, the vulnerability allows an authenticated user to read, create, modify, and delete namespace properties in any namespace in any tenant. In Pulsar, namespace properties are reserved for user provided metadata about the namespace.
This issue affects Apache Pulsar versions from 2.7.1 to 2.10.6, from 2.11.0 to 2.11.4, from 3.0.0 to 3.0.3, from 3.1.0 to 3.1.3, and from 3.2.0 to 3.2.1.
3.0 Apache Pulsar users should upgrade to at least 3.0.4.
3.1 and 3.2 Apache Pulsar users should upgrade to at least 3.2.2.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. |
| The Pulsar Functions Worker includes a capability that permits authenticated users to create functions where the function's implementation is referenced by a URL. The supported URL schemes include "file", "http", and "https". When a function is created using this method, the Functions Worker will retrieve the implementation from the URL provided by the user. However, this feature introduces a vulnerability that can be exploited by an attacker to gain unauthorized access to any file that the Pulsar Functions Worker process has permissions to read. This includes reading the process environment which potentially includes sensitive information, such as secrets. Furthermore, an attacker could leverage this vulnerability to use the Pulsar Functions Worker as a proxy to access the content of remote HTTP and HTTPS endpoint URLs. This could also be used to carry out denial of service attacks.
This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true".
This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0.
2.10 Pulsar Function Worker users should upgrade to at least 2.10.6.
2.11 Pulsar Function Worker users should upgrade to at least 2.11.4.
3.0 Pulsar Function Worker users should upgrade to at least 3.0.3.
3.1 Pulsar Function Worker users should upgrade to at least 3.1.3.
3.2 Pulsar Function Worker users should upgrade to at least 3.2.1.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.
The updated versions of Pulsar Functions Worker will, by default, impose restrictions on the creation of functions using URLs. For users who rely on this functionality, the Function Worker configuration provides two configuration keys: "additionalEnabledConnectorUrlPatterns" and "additionalEnabledFunctionsUrlPatterns". These keys allow users to specify a set of URL patterns that are permitted, enabling the creation of functions using URLs that match the defined patterns. This approach ensures that the feature remains available to those who require it, while limiting the potential for unauthorized access and exploitation. |
| In Pulsar Functions Worker, authenticated users can upload functions in jar or nar files. These files, essentially zip files, are extracted by the Functions Worker. However, if a malicious file is uploaded, it could exploit a directory traversal vulnerability. This occurs when the filenames in the zip files, which aren't properly validated, contain special elements like "..", altering the directory path. This could allow an attacker to create or modify files outside of the designated extraction directory, potentially influencing system behavior. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true".
This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0.
2.10 Pulsar Function Worker users should upgrade to at least 2.10.6.
2.11 Pulsar Function Worker users should upgrade to at least 2.11.4.
3.0 Pulsar Function Worker users should upgrade to at least 3.0.3.
3.1 Pulsar Function Worker users should upgrade to at least 3.1.3.
3.2 Pulsar Function Worker users should upgrade to at least 3.2.1.
Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. |
| Improper Authentication vulnerability in Apache Pulsar WebSocket Proxy allows an attacker to connect to the /pingpong endpoint without authentication.
This issue affects Apache Pulsar WebSocket Proxy: from 2.8.0 through 2.8.*, from 2.9.0 through 2.9.*, from 2.10.0 through 2.10.4, from 2.11.0 through 2.11.1, 3.0.0.
The known risks include a denial of service due to the WebSocket Proxy accepting any connections, and excessive data transfer due to misuse of the WebSocket ping/pong feature.
2.10 Pulsar WebSocket Proxy users should upgrade to at least 2.10.5.
2.11 Pulsar WebSocket Proxy users should upgrade to at least 2.11.2.
3.0 Pulsar WebSocket Proxy users should upgrade to at least 3.0.1.
3.1 Pulsar WebSocket Proxy users are unaffected.
Any users running the Pulsar WebSocket Proxy for 2.8, 2.9, and earlier should upgrade to one of the above patched versions. |
