| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate usa_ofs before preserving the update sequence number
When ntfs_mft_record_alloc() reuses a free mft record it reads the old
update sequence number straight from the on-disk record:
usn = *(__le16 *)((u8 *)m + le16_to_cpu(m->usa_ofs));
Here m points into the raw $MFT page-cache folio, which still holds
unvalidated, MST-protected bytes: the folio is read by a plain
iomap_read_folio() and neither post_read_mst_fixup() nor
ntfs_mft_record_check() has run on it (both work on private copies).
m->usa_ofs is therefore an untrusted u16, and a corrupted record can put
it past the end of the record so the two-byte read lands outside the
folio. Reading such a record while creating a file gives, under KASAN:
BUG: KASAN: use-after-free in ntfs_mft_record_alloc+...
Read of size 2 at addr ...
ntfs_mft_record_alloc -> __ntfs_create -> ntfs_create -> path_openat
Only preserve the old update sequence number when usa_ofs is even and in
range, mirroring the check ntfs_mft_record_check() already applies;
otherwise leave usn zero, which the existing restore below skips. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: free completion queues with ib_free_cq()
smbdirect_connection_destroy_qp() creates the send and receive completion
queues with ib_alloc_cq_any(), which for IB_POLL_WORKQUEUE arms an
internal completion handler that runs ib_cq_poll_work() on a workqueue.
Tearing those CQs down with ib_destroy_cq() frees them without first
cancelling that poll work.
If the provider posts a completion late -- for example Soft-RoCE (rxe)
posting an RNR error from rxe_receiver() after rdma_destroy_qp() -- the
handler re-queues ib_cq_poll_work() on the already-freed CQ, and a
follow-on access faults in rxe_req_notify_cq().
Use ib_free_cq(), which cancel_work_sync()es the poll work before freeing
the CQ, so no completion handler can run against a freed queue.
[ 1236.599526] ==================================================================
[ 1236.602142] BUG: KASAN: slab-use-after-free in ib_cq_poll_work+0xd0/0x1a0
[ 1236.605524] Read of size 8 at addr ffff888111865800 by task kworker/4:1H/82
[ 1236.609017]
[ 1236.609270] CPU: 4 UID: 0 PID: 82 Comm: kworker/4:1H Not tainted 7.2.0-rc3-next-20260717-virtme #110 PREEMPT(lazy)
[ 1236.609287] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 1236.609498] Workqueue: ib-comp-wq ib_cq_poll_work
[ 1236.609525] Call Trace:
[ 1236.609536] <TASK>
[ 1236.609545] __dump_stack+0x21/0x60
[ 1236.609562] dump_stack_lvl+0xc2/0x100
[ 1236.609573] print_address_description+0x77/0x200
[ 1236.609587] ? ib_cq_poll_work+0xd0/0x1a0
[ 1236.609597] print_report+0x58/0x70
[ 1236.609607] kasan_report+0x117/0x150
[ 1236.609623] ? ib_cq_poll_work+0xd0/0x1a0
[ 1236.609636] ? process_scheduled_works+0x954/0x1600
[ 1236.609650] ib_cq_poll_work+0xd0/0x1a0
[ 1236.609662] ? process_scheduled_works+0x954/0x1600
[ 1236.609674] process_scheduled_works+0xc22/0x1600
[ 1236.609698] ? __pfx_process_scheduled_works+0x10/0x10
[ 1236.609713] ? __pfx_assign_work+0x10/0x10
[ 1236.609726] ? lock_is_held_type+0x7b/0x110
[ 1236.609741] worker_thread+0x975/0xee0
[ 1236.609757] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 1236.609775] ? __kthread_parkme+0x21e/0x260
[ 1236.609789] kthread+0x3a6/0x490
[ 1236.609800] ? __pfx_worker_thread+0x10/0x10
[ 1236.609809] ? __pfx_kthread+0x10/0x10
[ 1236.609820] ret_from_fork+0x55a/0xa20
[ 1236.609835] ? __pfx_ret_from_fork+0x10/0x10
[ 1236.609850] ? __pfx_kthread+0x10/0x10
[ 1236.609861] ret_from_fork_asm+0x1a/0x30
[ 1236.609880] </TASK>
[ 1236.609886]
[ 1236.661292] Allocated by task 5076:
[ 1236.662640] kasan_save_track+0x3e/0x80
[ 1236.663842] __kasan_kmalloc+0x72/0x90
[ 1236.664763] __kmalloc_noprof+0x2b0/0x5d0
[ 1236.665356] __ib_alloc_cq+0x284/0x1000
[ 1236.666573] __ib_alloc_cq_any+0x23e/0x340
[ 1236.668654] smbdirect_connection_create_qp+0x6f7/0x1070
[ 1236.669757] smbdirect_accept_connect_request+0x500/0x1ca0
[ 1236.672625] smbdirect_listen_rdma_event_handler+0x1655/0x1c50
[ 1236.673930] cma_listen_handler+0x1bf/0x260
[ 1236.674923] cma_cm_event_handler+0x128/0x380
[ 1236.676926] cma_ib_req_handler+0x2d3d/0x4de0
[ 1236.678368] cm_process_work+0xb0/0x530
[ 1236.680454] cm_queue_work_unlock+0xb1/0x230
[ 1236.681673] cm_work_handler+0x969f/0xdca0
[ 1236.682704] process_scheduled_works+0xc22/0x1600
[ 1236.683447] worker_thread+0x975/0xee0
[ 1236.685901] kthread+0x3a6/0x490
[ 1236.688164] ret_from_fork+0x55a/0xa20
[ 1236.689522] ret_from_fork_asm+0x1a/0x30
[ 1236.690073]
[ 1236.690378] Freed by task 5137:
[ 1236.692242] kasan_save_track+0x3e/0x80
[ 1236.694272] kasan_save_free_info+0x40/0x50
[ 1236.695514] __kasan_slab_free+0x3a/0x60
[ 1236.696773] kfree+0x14e/0x4e0
[ 1236.697216] ib_destroy_cq_user+0x18d/0x250
[ 1236.699817] smbdirect_connection_destroy_qp+0xf2/0x280
[ 1236.702115] smbdirect_socket_destroy_sync+0x1607/0x2720
[ 1236.704062] smbdirect_socket_release+0x140/0x280
[ 1236.705286] smb_direct_free_transpor
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: move custom expectation support to helper
Originally, the ct expectation support called nf_ct_helper_ext_add() for
confirmed conntracks, which is invalid, triggering a splat. This was
fixed by commit 1710eb913bdc ("netfilter: nft_ct: skip expectations for
confirmed conntrack") which restricted it to unconfirmed conntracks.
However, early insertion of expectations into the expectations list when
the conntrack is unconfirmed leads to stale entries pointing to the
wrong hlist_head through .pprev due to ct extension reallocation.
Commit 7c9664351980 ("netfilter: move nat hlist_head to nf_conn") moved
the nat hlist_head to nf_conn for this reason:
1. ...
2. When reallocation of extension area occurs we need to fixup the
bysource hash head via hlist_replace_rcu.
I'd rather not increase the size of the struct nf_conn for this feature
has very limited scope: only one expectation can be created at a time
given expect_clash() will make nf_ct_expect_related() reports EBUSY.
For this reason, relax nf_ct_expect_related() not to drop packets in
case expectation creation fails, therefore, expectation creation becomes
best effort.
To address this issue, add an internal ct helper and attach it to the
conntrack entry to streamline the custom ct expectation support with
existing ct helpers.
Expose a new nf_conntrack_helper_release() function to release the
internal helper that is allocated and attached to the conntrack entry to
create the custom expectations. The nft_ct module removal always waits
for rcu grace period, then the NULL helper callback is observed after
this.
This patch also restricts the creation of expectations to different
helpers other than this custom helper that is created for this type of
expectations. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: clear vdev->msi_perm after freeing it on init failure
vfio_msi_cap_len() lazily allocates the per-device MSI permission table:
vdev->msi_perm = kmalloc_obj(struct perm_bits, GFP_KERNEL_ACCOUNT);
if (!vdev->msi_perm)
return -ENOMEM;
ret = init_pci_cap_msi_perm(vdev->msi_perm, len, flags);
if (ret) {
kfree(vdev->msi_perm);
return ret; /* vdev->msi_perm left dangling */
}
When init_pci_cap_msi_perm() -> alloc_perm_bits() fails with -ENOMEM, the
error path frees vdev->msi_perm but leaves the freed pointer stored in
it. vdev->msi_perm is not re-zeroed later because struct
vfio_pci_core_device is per-device and persists across open/close cycles,
and the vfio_config_init() error path returns without calling
vfio_config_free(). So the dangling pointer outlives the failed open.
That leads to two use-after-frees on the same device:
1. Reuse. The next vfio_config_init() sees the stale pointer at
"if (vdev->msi_perm) return len;" and reuses the freed object. MSI
config accesses in vfio_pci_config_rw_single() then dereference and
call the freed perm->readfn / perm->writefn function pointers.
2. Double free. A later vfio_config_free() runs free_perm_bits() and
kfree() on the already-freed object.
Fix it by NULLing vdev->msi_perm after the kfree(), matching the
NULL-after-free discipline already used in free_perm_bits() and
vfio_config_free().
BUG: KASAN: slab-use-after-free in vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961)
Read of size 8 at addr ffff88800fcc88d0 by task exploit/143
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961)
vfio_pci_config_rw (drivers/vfio/pci/vfio_pci_config.c:1986)
vfio_pci_rw (drivers/vfio/pci/vfio_pci_core.c:1599)
vfs_read (fs/read_write.c:572)
__x64_sys_pread64 (fs/read_write.c:764)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Followed on device close by a double free of the same object:
Oops: general protection fault, probably for non-canonical address
0x1f63e0e8000008: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:kfree (mm/slub.c:6711)
Call Trace:
vfio_config_free (drivers/vfio/pci/vfio_pci_config.c:1861)
vfio_pci_core_disable (drivers/vfio/pci/vfio_pci_core.c:685)
vfio_pci_core_close_device (drivers/vfio/pci/vfio_pci_core.c:777)
vfio_df_close (drivers/vfio/vfio_main.c:602)
vfio_device_fops_release (drivers/vfio/vfio_main.c:648)
__fput (fs/file_table.c:512)
__x64_sys_close (fs/open.c:1496)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
slip: remove slip_hangup() to fix use-after-free in slip_receive_buf()
Jaeyoung Chung and Eulgyu Kim reported a slab-use-after-free read
in slip_receive_buf() when racing against tty hangup.
tty_ldisc_hangup() calls ld->ops->hangup() while holding only
a read lock on tty->ldisc_sem (via tty_ldisc_ref()).
Because slip_hangup() simply called slip_close(), it ran concurrently
with reader functions such as slip_receive_buf().
slip_close() unregisters and frees the net device and its private
struct slip, causing concurrent reader threads in slip_receive_buf()
to dereference freed memory.
Line discipline close() is already guaranteed to be called under
the write lock of tty->ldisc_sem during hangup processing
(in tty_ldisc_reinit() or tty_ldisc_kill()).
Remove slip_hangup() so teardown is serialized cleanly by slip_close(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix race l2cap_sock_cleanup_listen() vs. put_chan
For L2CAP sockets without owning sk->sk_socket, reading
l2cap_pi(sk)->chan may race against concurrent l2cap_sock_kill() ->
l2cap_sock_put_chan(). This excludes simultaneous proto_ops callbacks,
but access in l2cap_sock_cleanup_listen() has unsafe lockless read.
[Task 1] [Task 2 (hdev->workqueue)]
l2cap_sock_release(parent) l2cap_disconn_cfm
l2cap_sock_cleanup_listen l2cap_conn_del
bt_accept_dequeue l2cap_chan_del
lock_sock(sk) l2cap_sock_teardown_cb
bt_accept_unlink
bt_sk(sk)->parent = NULL
release_sock(sk) ----------------> lock_sock(sk)
parent = /* NULL */
lock_sock(sk) <--------------------- release_sock(sk)
sock_set_flag(sk, SOCK_ZAPPED)
l2cap_sock_close_cb
l2cap_sock_kill(sk)
l2cap_sock_put_chan
chan = READ l2cap_pi(sk)->chan l2cap_pi(sk)->chan = NULL
l2cap_chan_hold_unless_zero l2cap_put_chan(chan)
kref_get_unless_zero(&chan->ref)
Task 1 may observe NULL which causes null-ptr-deref.
Fix the race by taking lock_sock() in l2cap_sock_kill() to
synchronize with l2cap_sock_cleanup_listen(). hold_unless_zero() is not
needed here, l2cap_pi(sk)->chan owns reference if it is non-NULL.
Clarify code comments vs. locking. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fix a resource leak in copy_net_ns() error handling path
Currently, preinit_net() does two things:
(1) call ns_common_init() which might fail
(2) initialize resources which does not fail
However, preinit_net() is returning early when (1) fails, and copy_net_ns()
is jumping to the dec_ucounts: label. As a result, resources allocated by
net_alloc() are leaking. We need to call key_remove_domain() and
net_passive_dec() in order to release resources allocated by net_alloc().
We cannot simply jump to the put_userns: label when preinit_net() failed,
for (2) is not yet done. But we can reorder (1) and (2), for there is no
dependency between (1) and (2). Therefore, this patch decouples (1) from
preinit_net() and changes preinit_net() back to a void function, and calls
ns_common_init() after preinit_net() succeeded. Then, we can jump to
immediately after ns_common_free() of the put_userns: label. |
| In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race
This bug was discovered while testing the hns3 driver under channel
reconfiguration (`ethtool -L` / `ethtool -G`) with iperf3 traffic on
arm64. The race is intermittently triggered when page_pool_destroy()
runs page_pool_scrub() concurrently with page return via
page_pool_put_netmem() on a different CPU. A WARN in
page_pool_clear_pp_info() surfaced the dangling DMA index bits left
by the cmpxchg loser, which led to the investigation.
page_pool_scrub() iterates pool->dma_mapped via xa_for_each() with no
page ref held. __page_pool_release_netmem_dma() currently reads and
writes netmem fields (dma_addr, DMA index bits in pp_magic) after
xa_cmpxchg() returns. The unref path calls put_page() unconditionally
regardless of the cmpxchg outcome; when it loses the cmpxchg, it still
frees the page before the scrub winner finishes these netmem accesses,
so scrub touches a freed page -- a Use-After-Free.
Fix this by splitting the DMA release into two functions:
1. __page_pool_unmap_netmem_dma() caches dma_addr before xa_cmpxchg(),
does the cmpxchg to remove the DMA mapping, and calls dma_unmap on
the cached address. It never touches netmem fields after the cmpxchg,
making it safe for the scrub path which holds no page ref.
2. __page_pool_release_netmem_dma() wraps the above and additionally
clears dma_addr and DMA index bits in netmem fields. This is safe
only when the caller holds a page ref, so it is used by the return
path (page_pool_return_netmem).
The scrub path calls __page_pool_unmap_netmem_dma() directly; the return
path calls __page_pool_release_netmem_dma(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF in bpf_trampoline_multi_attach_free on update failure
When bpf_trampoline_update() fails before modify_fentry_multi()/
unregister_fentry_multi() is called, cur_image is unchanged
(cur_image == old_image) and ftrace still calls into it. Freeing
old_image in that case causes a UAF.
Only free old_image when it differs from cur_image. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: quiesce input in hid_hw_stop() to prevent use-after-free
A driver's probe calls hid_device_io_start() to enable input delivery,
then fails at a later initialization step and unwinds via hid_hw_stop().
The unwind frees struct hidraw via hidraw_disconnect() while in-flight
HID reports may still be running on another CPU, dereferencing the
freed object through hidraw_report_event(). syzbot reports the
resulting use-after-free for the corsair-psu HID driver.
Edward Adam Davis posted a per-driver fix for corsair-psu that adds
an explicit hid_device_io_stop() before hid_hw_stop() in the probe
error path ("hwmon: prevent packets from going to driver for probe",
2026-04-28). Auditing the tree shows 15 drivers call
hid_device_io_start(); 7 also call hid_device_io_stop() and 8 do not:
drivers calling hid_device_io_start() without a matching
hid_device_io_stop() before hid_hw_stop():
drivers/hwmon/corsair-psu.c (fix posted by Edward)
drivers/hwmon/corsair-cpro.c
drivers/hwmon/nzxt-kraken3.c
drivers/hwmon/nzxt-smart2.c
drivers/hwmon/gigabyte_waterforce.c
drivers/hid/hid-logitech-dj.c
drivers/hid/hid-nintendo.c
drivers/hid/hid-mcp2221.c
Roughly half of all callers of the API are exposed. Centralize the
quiesce in hid_hw_stop() so callers do not have to remember the
matching stop: if a driver has left hdev->io_started true on entry,
call hid_device_io_stop() before hid_disconnect().
For the 7 drivers that already call hid_device_io_stop() correctly,
hdev->io_started is false on entry, the guard short-circuits, and
behavior is unchanged.
No Fixes: tag because the affected drivers gained their
hid_device_io_start() calls independently over years; the bug is a
class-wide API misuse rather than a regression from one commit. |
| In the Linux kernel, the following vulnerability has been resolved:
cuse: wait for pending RCU callbacks on module exit
Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"),
fuse_conn_put() frees the fuse_conn through call_rcu() rather than
synchronously. For cuse, fc->release is cuse_fc_release(), which
lives in the cuse module. If the module is removed before the RCU
grace period ends, the callback jumps into freed module memory:
userspace / module unload | RCU softirq
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
close(/dev/cuse) |
cuse_channel_release() |
fuse_dev_release() |
fuse_conn_put(fch->conn) |
call_rcu(delayed_release) ------+---> callback queued
|
rmmod cuse |
cuse_exit() |
cuse_channel_destroy() |
... |
return |
|
<module text freed> |
| rcu_do_batch()
| delayed_release()
| fc->release()
| -> cuse_fc_release()
| ^^^ freed text!
The freed module text is unmapped by vfree(), so the jump into the
stale callback triggers a page-fault Oops. If the virtual address
is subsequently reused, the callback could execute unrelated code
(undefined behaviour).
Fix this by calling rcu_barrier() in cuse_exit() so that any pending
fuse_conn release callback completes before the module is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Destroy the admin queue on removal
The admin queue is allocated with blk_mq_alloc_queue() but never
destroyed. nvme_free_ctrl() only drops the last reference and
blk_mq_exit_queue() and blk_sync_queue() never run: the hctx is never
moved to q->unused_hctx_list and the timeout timer and work stay armed on
a queue that is about to be freed which will eventually oops inside
blk_mq_timeout_work().
This can only be triggered when the controller fails to come up and is
then immediately torn down again which is why no one ever ran into this
before.
Let's just copy what the pcie driver does: unquiesce and destroy the admin
queue before nvme_uninit_ctrl().
With this the following WARN followed by a panic no longer happens:
WARNING: block/blk-mq.c:4390 at blk_mq_release+0x194/0x238, CPU#4: kworker/u34:4/119
CPU: 4 UID: 0 PID: 119 Comm: kworker/u34:4 Not tainted 7.2.0-rc1-dirty #248 PREEMPT
Hardware name: Apple Mac mini (M1, 2020) (DT)
Workqueue: nvme-wq apple_nvme_remove_dead_ctrl_work
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : blk_mq_release+0x194/0x238
lr : blk_mq_release+0x58/0x238
sp : ffffc000833a3b50
x29: ffffc000833a3b50 x28: ffff80001d0450f8 x27: ffff800020c95200
x26: 0000000000000088 x25: 0000000000000000 x24: ffff800020f36805
x23: 0000000000000000 x22: ffffc00081a86878 x21: ffff800020be9c60
x20: 0000000000000000 x19: ffff800022501698 x18: 000000000000000a
x17: 7365757165722066 x16: 666f7265776f7020 x15: 0000000000000000
x14: 0000000000000028 x13: 0000000000004def x12: 0000000000000003
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc000805b4fc8
x8 : ffffc00081915820 x7 : ffffc00081c4f3c8 x6 : 0000000000000001
x5 : 0000000000000004 x4 : ffff800022498d80 x3 : ffffc000833a3b14
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800022501698
Call trace:
blk_mq_release+0x194/0x238 (P)
blk_put_queue+0x8c/0xf0
nvme_free_ctrl+0x4c/0x260
device_release+0x44/0x128
kobject_put+0xa0/0x120
put_device+0x1c/0x40
nvme_uninit_ctrl+0x48/0x60
apple_nvme_remove+0x54/0xb0
platform_remove+0x28/0x40
device_remove+0x54/0x98
device_release_driver_internal+
device_release_driver+0x20/0x38
apple_nvme_remove_dead_ctrl_wor
process_one_work+0x1f4/0x770
worker_thread+0x1b8/0x360
kthread+0x140/0x160
ret_from_fork+0x10/0x20
irq event stamp: 448
hardirqs last enabled at (447):in_unlock_irqrestore+0x74/0x80
hardirqs last disabled at (448): [<ffffc000811cf5c0>] el1_brk64+0x20/0x60
softirqs last enabled at (0): [ess+0xb28/0x2698
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace 0000000000000000
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL),
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagA
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[0000000000000000] user address
Internal error: Oops: 0000000096000005 [#1] SMP
CPU: 7 UID: 0 PID: 54 Comm: kwor 7.2.0-rc1-dirty #248PREEMPT
Tainted: [W]=WARN
Hardware name: Apple Mac mini (M1, 2020) (DT)
Workqueue: kblockd blk_mq_timeou
pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : percpu_ref_tryget_many.cons
lr : percpu_ref_tryget_many.constprop.0+0xc0/0x168
sp : ffffc000829cbce0
x29: ffffc000829cbce0 x28: ffff800020be9f48 x27: ffff800013e503c0
x26: 0000000000000108 x25: 000009c05
x23: 0000000000000000 x22: ffffc000819f5000 x21: ffff800020be9f48
x20: ffff8001deda4808 x19: ffff8000a
x17: 00000000580e1fac x16: ffffc00082bbbb7c x15: 0000000000000000
x14: 0000000000000028 x13: 000000001
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc000829cbc20
x8 :
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix the SCO setup context lifetime
hci_setup_sync() queues a conn_handle_t with a NULL destroy callback, so
the context is only freed if hci_enhanced_setup_sync() actually runs. An
entry that is cancelled instead is leaked, as
_hci_cmd_sync_cancel_entry() does not release entry->data when there is
no destroy callback, and hci_cmd_sync_clear() cancels every pending entry
when the controller is unregistered.
The context also stores a bare hci_conn pointer, so the connection can be
freed while the work is queued. The dequeue in hci_conn_del() does not
cover it either, as it matches on entry->data == conn and entry->data is
the wrapper here. Same problem as commit 2f5d635ad590 ("Bluetooth:
hci_sync: hold conn in hci_connect_acl/le_sync() callbacks").
Hold the connection and release both from a destroy callback. The
submission failure path drops both, since hci_cmd_sync_submit() does not
call the destroy callback when it fails to queue. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: remove callback IDR entry on client allocation failure
nfs4_alloc_client() allocates an NFSv4.0 callback identifier before it
finishes setting up the client. If any later initialization step fails,
the error path frees the nfs_client directly with nfs_free_client(). That
bypasses nfs_put_client(), which is where the callback IDR entry is
removed during normal teardown.
A failed allocation can therefore leave cb_ident_idr pointing at a freed
nfs_client. A later NFSv4.0 callback lookup by cb_ident would find the
stale pointer and take a reference to it.
Make the callback IDR removal helper callable by the allocation failure
path, and remove the callback identifier before freeing the client.
This was found by a local static-analysis checker for publish-before-free
lifetime bugs and confirmed by manual inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
block: mtip32xx: synchronize ioctls with device removal
The ioctl handlers only test REMOVE_PENDING before entering
mtip_hw_ioctl(). Removal can set that bit immediately afterwards and free
dd->port in mtip_hw_exit() while an ioctl still dereferences it. An already
open block device can reach the handlers while del_gendisk() is in
progress.
Serialize both native and compat ioctls with removal. Set REMOVE_PENDING
before taking the mutex so new callers fail after an in-flight ioctl has
drained, and hold the mutex until the port has been torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: register configfs subsystem after creating default devices
In null_init(), configfs_register_subsystem() currently runs before
register_blkdev(), so when null_blk is built as a module, a racing mkdir()
+ poweron from userspace can reach null_add_dev() while null_major is still
0. __add_disk() then hits WARN_ON(disk->minors) (major=0 with minors!=0)
and fails:
[root@fedora ~]# [ 2366.521436] WARNING: block/genhd.c:476 at __add_disk+0x8a7/0xde0,
[ 2366.523552] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
[ 2366.529081] CPU: 26 UID: 0 PID: 1600 Comm: sh Not tainted 7.2.0-rc1+ #66 PREEMPT(full)
......
[ 2366.547251] Call Trace:
[ 2366.547575] <TASK>
[ 2366.547831] ? _raw_spin_lock+0x84/0xe0
[ 2366.548260] add_disk_fwnode+0x114/0x560
[ 2366.548739] null_add_dev+0x102d/0x1b80 [null_blk]
[ 2366.549310] ? __pfx_null_add_dev+0x10/0x10 [null_blk]
[ 2366.549906] ? mutex_lock+0xde/0x1c0
[ 2366.550361] ? __pfx_mutex_lock+0x10/0x10
[ 2366.550827] nullb_device_power_store+0x1e7/0x280 [null_blk]
[ 2366.551499] ? __pfx_nullb_device_power_store+0x10/0x10 [null_blk]
[ 2366.552177] ? __kmalloc_cache_noprof+0x1f5/0x470
[ 2366.552748] ? configfs_write_iter+0x35c/0x4e0
[ 2366.553242] configfs_write_iter+0x286/0x4e0
[ 2366.553787] vfs_write+0x52d/0xd00
[ 2366.554169] ? __pfx_vfs_write+0x10/0x10
[ 2366.554679] ? __pfx___css_rstat_updated+0x10/0x10
[ 2366.555196] ? fdget_pos+0x1cf/0x4c0
[ 2366.555649] ksys_write+0xfc/0x1d0
......
Additionally, the err_dev path destroys all devices on nullb_list while
configfs is still registered. If a racing mkdir() + poweron puts a user
device on the list, null_destroy_dev()->null_free_dev() kfrees the user
device's nullb_device but /sys/kernel/config/nullb/<name> is still
reachable. Any userspace access to the item will trigger a UAF.
For simplicity, move configfs_register_subsystem() to the end to solve
the problems above. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: destroy QP before mem pools on accept failure
On the rdma_accept_failed error path of
smbdirect_accept_connect_request(), the receive io posted just above is
owned by the QP (recv_io is set to NULL after a successful post). The
error path fell through to smbdirect_connection_destroy_mem_pools()
before smbdirect_connection_destroy_qp(), so the mem pools and the
recv_io slab cache were destroyed while that recv_io was still
outstanding on the QP.
The drain in smbdirect_connection_destroy_qp() (ib_drain_qp()) is what
runs the recv completion that returns the recv_io to the free list, so
destroying the pools first leaves the object outstanding at
kmem_cache_destroy() time ("Slab cache still has objects") and later
frees it into an already-destroyed mempool (mempool_free_bulk
NULL-pointer dereference).
Give rdma_accept_failed its own teardown that drains the QP first, then
destroys the mem pools, and returns. The remaining labels
(post_recv_io_failed onward) run before the recv_io was ever posted, so
they keep the mem-pools-then-qp order.
The outstanding recv_io at kmem_cache_destroy() time:
[ 3487.344647] =============================================================================
[ 3487.349942] BUG smbdirect_recv_io_cache_ffff88811ba99000 (Not tainted): Objects remaining on __kmem_cache_shutdown()
[ 3487.356078] -----------------------------------------------------------------------------
[ 3487.356078]
[ 3487.356738] Object 0xffff8881511c3440 @offset=13376
[ 3487.358464] Allocated in mempool_alloc_noprof+0x18c/0x290 age=1194 cpu=6 pid=22254
[ 3487.361197] mempool_alloc_noprof+0x18c/0x290
[ 3487.361542] smbdirect_connection_create_mem_pools+0x405/0x780
[ 3487.361972] smbdirect_accept_connect_request+0x5a8/0x1b80
[ 3487.362359] smbdirect_listen_rdma_event_handler+0x1579/0x1b90
[ 3487.362779] cma_cm_event_handler+0x9c/0x230
[ 3487.363096] cma_ib_req_handler+0x2682/0x45d0
[ 3487.363414] cm_process_work+0x56/0x3d0
[ 3487.363676] cm_work_handler+0x8a0e/0xd000
[ 3487.367496] process_scheduled_works+0xa07/0x13a0
[ 3487.367859] worker_thread+0x7c9/0xc80
[ 3487.368148] kthread+0x341/0x430
[ 3487.368407] ret_from_fork+0x3a8/0x7a0
[ 3487.368704] ret_from_fork_asm+0x1a/0x30
[ 3487.370307] Slab 0xffffea0005447000 objects=19 used=1 fp=0xffff8881511c0040 flags=0x100000000000240(workingset|head|node=0|zone=2)
[ 3487.372840] ------------[ cut here ]------------
[ 3487.373195] WARNING: mm/slub.c:1244 at __slab_err+0x1a/0x30, CPU#6: kworker/6:84/22254
[ 3487.373759] Modules linked in:
[ 3487.373993] CPU: 6 UID: 0 PID: 22254 Comm: kworker/6:84 Tainted: G B 7.1.0-next-20260623+ #88 PREEMPT(lazy)
[ 3487.374778] Tainted: [B]=BAD_PAGE
[ 3487.377830] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 3487.378515] Workqueue: ib_cm cm_work_handler
[ 3487.378820] RIP: 0010:__slab_err+0x1a/0x30
[ 3487.379129] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 e8 36 00 00 00 bf 05 00 00 00 be 01 00 00 00 e8 f7 75 45 00 90 <0f> 0b 90 c3 cc cc cc cc cc 66 66 66 66 2e 0f 1f 84 00 00 00 00 00
[ 3487.383255] RSP: 0018:ffff888220fc7050 EFLAGS: 00010093
[ 3487.383643] RAX: ffffffff8168e60a RBX: ffff88810955e640 RCX: ffff88821c381d80
[ 3487.384158] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff870fa080
[ 3487.384662] RBP: ffff888220fc7068 R08: ffffffff870fa087 R09: 1ffffffff0e1f410
[ 3487.385192] R10: dffffc0000000000 R11: fffffbfff0e1f411 R12: ffffea0005447210
[ 3487.385674] R13: ffffea0005447000 R14: ffff888220fc7068 R15: ffff88812a8ab300
[ 3487.388932] FS: 0000000000000000(0000) GS:ffff888427e76000(0000) knlGS:0000000000000000
[ 3487.389529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3487.389934] CR2: 00007ffcf2d84fd8 CR3: 0000000111d64006 CR4: 0000000000f72ef0
[ 3487.390440] PKRU: 55555554
[ 3487.390641] Call Trace:
[ 3487.390826] <TASK>
[ 3
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: Preserve allocation virtual address for dynamic pools
swiotlb_alloc_tlb() can allocate from the DMA atomic pool when a decrypted
pool is needed from atomic context. With CONFIG_DMA_DIRECT_REMAP, the
atomic pool is backed by remapped virtual addresses, which are not the same
as the direct-map addresses returned by phys_to_virt().
swiotlb_init_io_tlb_pool() currently reconstructs the pool virtual address
from the physical start address. For atomic-pool backed allocations this
stores the wrong address in pool->vaddr. Later, swiotlb_free_tlb() passes
that address to dma_free_from_pool(), which will fail to recognize the
chunk
Pass the virtual address returned by the allocation path into
swiotlb_init_io_tlb_pool(), and store that address in pool->vaddr. This
keeps the pool free path using the same virtual address as the allocator. |
| In the Linux kernel, the following vulnerability has been resolved:
uio: Fix stale info pointer in failed registration path
After device_add(), the UIO device is visible to userspace and /dev/uioX
can be opened. If a later setup step fails, __uio_register_device()
unwinds the device but leaves idev->info pointing at the caller-owned
struct uio_info.
That is unsafe when an opener races with the failed registration path.
The open file keeps a reference to the uio_device, while the caller sees
registration failure and may free its struct uio_info. Later file
operations can then follow idev->info and dereference freed memory.
Handle post-device_add() failures like unregister: remove UIO attributes
while the info pointer is still valid, then clear idev->info under
info_lock and wake existing waiters/async users before removing the
device and minor. This makes already-open file descriptors observe the
same "device gone" state as normal uio_unregister_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix deadlock during unregister
Unregistering an s390dbf debug area while one of the associated debugfs
files is being written to can cause a deadlock:
$ echo >.../vmur/level $ rmmod vmur
===================================================
debugfs write
debugfs_file_get()
debug_unregister()
mutex_lock(debug_mutex)
debugfs_remove()
wait for debugfs_file_put()
debug_file_ops.write()
debug_input()
mutex_lock(debug_mutex) ==> DEADLOCK
Fix this by splitting debug_unregister() into an s390dbf and debugfs
part, and running only the s390dbf part with debug_mutex locked. |
