| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb()
For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is
defined as NR_CPUS instead of the number of possible cpus, this
will cause the following system panic:
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
...
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1
...
BUG: unable to handle page fault for address: ffffffff9911c8c8
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W
6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6
RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0
RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082
CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0
Call Trace:
<TASK>
? __die+0x23/0x80
? page_fault_oops+0xa4/0x180
? exc_page_fault+0x152/0x180
? asm_exc_page_fault+0x26/0x40
? rcu_tasks_need_gpcb+0x25d/0x2c0
? __pfx_rcu_tasks_kthread+0x40/0x40
rcu_tasks_one_gp+0x69/0x180
rcu_tasks_kthread+0x94/0xc0
kthread+0xe8/0x140
? __pfx_kthread+0x40/0x40
ret_from_fork+0x34/0x80
? __pfx_kthread+0x40/0x40
ret_from_fork_asm+0x1b/0x80
</TASK>
Considering that there may be holes in the CPU numbers, use the
maximum possible cpu number, instead of nr_cpu_ids, for configuring
enqueue and dequeue limits.
[ neeraj.upadhyay: Fix htmldocs build error reported by Stephen Rothwell ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Pass non-null to dcn20_validate_apply_pipe_split_flags
[WHAT & HOW]
"dcn20_validate_apply_pipe_split_flags" dereferences merge, and thus it
cannot be a null pointer. Let's pass a valid pointer to avoid null
dereference.
This fixes 2 FORWARD_NULL issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check null pointers before using them
[WHAT & HOW]
These pointers are null checked previously in the same function,
indicating they might be null as reported by Coverity. As a result,
they need to be checked when used again.
This fixes 3 FORWARD_NULL issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check null pointers before used
[WHAT & HOW]
Poniters, such as dc->clk_mgr, are null checked previously in the same
function, so Coverity warns "implies that "dc->clk_mgr" might be null".
As a result, these pointers need to be checked when used again.
This fixes 10 FORWARD_NULL issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check null pointers before multiple uses
[WHAT & HOW]
Poniters, such as stream_enc and dc->bw_vbios, are null checked previously
in the same function, so Coverity warns "implies that stream_enc and
dc->bw_vbios might be null". They are used multiple times in the
subsequent code and need to be checked.
This fixes 10 FORWARD_NULL issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null check for head_pipe in dcn201_acquire_free_pipe_for_layer
This commit addresses a potential null pointer dereference issue in the
`dcn201_acquire_free_pipe_for_layer` function. The issue could occur
when `head_pipe` is null.
The fix adds a check to ensure `head_pipe` is not null before asserting
it. If `head_pipe` is null, the function returns NULL to prevent a
potential null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null check for head_pipe in dcn32_acquire_idle_pipe_for_head_pipe_in_layer
This commit addresses a potential null pointer dereference issue in the
`dcn32_acquire_idle_pipe_for_head_pipe_in_layer` function. The issue
could occur when `head_pipe` is null.
The fix adds a check to ensure `head_pipe` is not null before asserting
it. If `head_pipe` is null, the function returns NULL to prevent a
potential null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2690 dcn32_acquire_idle_pipe_for_head_pipe_in_layer() error: we previously assumed 'head_pipe' could be null (see line 2681) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null check for pipe_ctx->plane_state in dcn20_program_pipe
This commit addresses a null pointer dereference issue in the
`dcn20_program_pipe` function. The issue could occur when
`pipe_ctx->plane_state` is null.
The fix adds a check to ensure `pipe_ctx->plane_state` is not null
before accessing. This prevents a null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c:1925 dcn20_program_pipe() error: we previously assumed 'pipe_ctx->plane_state' could be null (see line 1877) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check null pointer before try to access it
[why & how]
Change the order of the pipe_ctx->plane_state check to ensure that
plane_state is not null before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/adreno: Assign msm_gpu->pdev earlier to avoid nullptrs
There are some cases, such as the one uncovered by Commit 46d4efcccc68
("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails")
where
msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL);
is called on gpu->pdev == NULL, as the GPU device has not been fully
initialized yet.
Turns out that there's more than just the aforementioned path that
causes this to happen (e.g. the case when there's speedbin data in the
catalog, but opp-supported-hw is missing in DT).
Assigning msm_gpu->pdev earlier seems like the least painful solution
to this, therefore do so.
Patchwork: https://patchwork.freedesktop.org/patch/602742/ |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: unquiesce admin_q before destroy it
Kernel will hang on destroy admin_q while we create ctrl failed, such
as following calltrace:
PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme"
#0 [ff61d23de260fb78] __schedule at ffffffff8323bc15
#1 [ff61d23de260fc08] schedule at ffffffff8323c014
#2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1
#3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a
#4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006
#5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce
#6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced
#7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b
#8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362
#9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25
RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202
RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574
RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004
RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004
R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500
ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b
This due to we have quiesced admi_q before cancel requests, but forgot
to unquiesce before destroy it, as a result we fail to drain the
pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here
try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and
simplify the code. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent tailcall infinite loop caused by freplace
There is a potential infinite loop issue that can occur when using a
combination of tail calls and freplace.
In an upcoming selftest, the attach target for entry_freplace of
tailcall_freplace.c is subprog_tc of tc_bpf2bpf.c, while the tail call in
entry_freplace leads to entry_tc. This results in an infinite loop:
entry_tc -> subprog_tc -> entry_freplace --tailcall-> entry_tc.
The problem arises because the tail_call_cnt in entry_freplace resets to
zero each time entry_freplace is executed, causing the tail call mechanism
to never terminate, eventually leading to a kernel panic.
To fix this issue, the solution is twofold:
1. Prevent updating a program extended by an freplace program to a
prog_array map.
2. Prevent extending a program that is already part of a prog_array map
with an freplace program.
This ensures that:
* If a program or its subprogram has been extended by an freplace program,
it can no longer be updated to a prog_array map.
* If a program has been added to a prog_array map, neither it nor its
subprograms can be extended by an freplace program.
Moreover, an extension program should not be tailcalled. As such, return
-EINVAL if the program has a type of BPF_PROG_TYPE_EXT when adding it to a
prog_array map.
Additionally, fix a minor code style issue by replacing eight spaces with a
tab for proper formatting. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: Fix H264 stateless decoder smatch warning
Fix a smatch static checker warning on vdec_h264_req_if.c.
Which leads to a kernel crash when fb is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware
If the value of max_speed_hz is 0, it may cause a division by zero
error in hisi_calc_effective_speed().
The value of max_speed_hz is provided by firmware.
Firmware is generally considered as a trusted domain. However, as
division by zero errors can cause system failure, for defense measure,
the value of max_speed is validated here. So 0 is regarded as invalid
and an error code is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid overflow from uint32_t to uint8_t
[WHAT & HOW]
dmub_rb_cmd's ramping_boundary has size of uint8_t and it is assigned
0xFFFF. Fix it by changing it to uint8_t with value of 0xFF.
This fixes 2 INTEGER_OVERFLOW issues reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: stm32/cryp - call finalize with bh disabled
The finalize operation in interrupt mode produce a produces a spinlock
recursion warning. The reason is the fact that BH must be disabled
during this process. |
| In the Linux kernel, the following vulnerability has been resolved:
pinmux: Use sequential access to access desc->pinmux data
When two client of the same gpio call pinctrl_select_state() for the
same functionality, we are seeing NULL pointer issue while accessing
desc->mux_owner.
Let's say two processes A, B executing in pin_request() for the same pin
and process A updates the desc->mux_usecount but not yet updated the
desc->mux_owner while process B see the desc->mux_usecount which got
updated by A path and further executes strcmp and while accessing
desc->mux_owner it crashes with NULL pointer.
Serialize the access to mux related setting with a mutex lock.
cpu0 (process A) cpu1(process B)
pinctrl_select_state() { pinctrl_select_state() {
pin_request() { pin_request() {
...
....
} else {
desc->mux_usecount++;
desc->mux_usecount && strcmp(desc->mux_owner, owner)) {
if (desc->mux_usecount > 1)
return 0;
desc->mux_owner = owner;
} } |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change
When disabling wifi mt7921_ipv6_addr_change() is called as a notifier.
At this point mvif->phy is already NULL so we cannot use it here. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: fail closed if we can't get max channel used in indirection tables
Commit 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with
active RSS contexts") proves that allowing indirection table to contain
channels with out of bounds IDs may lead to crashes. Currently the
max channel check in the core gets skipped if driver can't fetch
the indirection table or when we can't allocate memory.
Both of those conditions should be extremely rare but if they do
happen we should try to be safe and fail the channel change. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check link_index before accessing dc->links[]
[WHY & HOW]
dc->links[] has max size of MAX_LINKS and NULL is return when trying to
access with out-of-bound index.
This fixes 3 OVERRUN and 1 RESOURCE_LEAK issues reported by Coverity. |
