| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The HTTP Digest Access Authentication implementation in Apache Tomcat 5.5.x before 5.5.36, 6.x before 6.0.36, and 7.x before 7.0.30 does not properly check for stale nonce values in conjunction with enforcement of proper credentials, which makes it easier for remote attackers to bypass intended access restrictions by sniffing the network for valid requests. |
| The HTTP Digest Access Authentication implementation in Apache Tomcat 5.5.x before 5.5.36, 6.x before 6.0.36, and 7.x before 7.0.30 caches information about the authenticated user within the session state, which makes it easier for remote attackers to bypass authentication via vectors related to the session ID. |
| The ARM64 MMU back-end allocated address space identifiers (ASIDs) for memory domains with a bare round-robin counter in arch_mem_domain_init() (arch/arm64/core/mmu.c). VM_ASID_BITS is 8, so only 255 ASIDs exist; once the counter wrapped, arch_mem_domain_init() could hand an ASID to a new domain while a still-live domain held the same one. Domain-private mappings are installed non-global (MT_NG), so the ASID is the only tag separating one domain's cached translations from another's in the TLB.
The context-switch path in z_arm64_swap_ptables() only flushes the TLB when the outgoing and incoming domains carry the same ASID, which does not cover a duplicate reached through a third domain: for domains A and C sharing an ASID and an unrelated domain B, the schedule A -> B -> C never takes the flush branch, so the ASID-tagged entries A populated remain resident while C runs. Under SMP two live domains sharing an ASID can additionally be resident on two CPUs at once, which the architecture does not allow for distinct translation-table sets.
Triggering the wrap requires a CONFIG_USERSPACE application on ARM64 that creates more than 255 memory domains over its lifetime; k_mem_domain_init() and k_mem_domain_deinit() are supervisor-only APIs and are not exposed as syscalls, so an unprivileged thread cannot drive the counter directly. Once two live domains alias, however, a user-mode thread in one domain can read and write memory belonging to the other domain's partitions and thread stacks with that domain's permissions, defeating the memory-domain isolation boundary.
The fix scans the live domain_list before assigning an ASID, advances the round-robin counter past ASIDs already in use, and returns -ENOMEM when all are taken, so domain creation fails closed instead of silently aliasing. |
| Pingvin Share X from 0.19.0 before 1.22.0 contains an improper authentication vulnerability that allows remote unauthenticated attackers to take over accounts by abusing automatic OAuth email linking in OAuthService.signUp(). Attackers can register a victim's unverified email on an enabled OAuth/OIDC provider, exploiting the missing email_verified check in GenericOidcProvider, to sign in as the victim including administrators while bypassing TOTP. |
| Vulnerability in the Oracle Demand Signal Repository product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Demand Signal Repository. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Demand Signal Repository accessible data as well as unauthorized access to critical data or complete access to all Oracle Demand Signal Repository accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). |
| Vulnerability in the Oracle Demand Signal Repository product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Demand Signal Repository. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Demand Signal Repository accessible data as well as unauthorized access to critical data or complete access to all Oracle Demand Signal Repository accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). |
| Vulnerability in the Oracle Engineering product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Engineering. While the vulnerability is in Oracle Engineering, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Engineering accessible data as well as unauthorized access to critical data or complete access to all Oracle Engineering accessible data. CVSS 3.1 Base Score 8.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:N). |
| Vulnerability in the Oracle Engineering product of Oracle E-Business Suite (component: Change Management). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Engineering. While the vulnerability is in Oracle Engineering, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Engineering accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). |
| Vulnerability in the Oracle Depot Repair product of Oracle E-Business Suite (component: Depot Repair Diagnostics). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Depot Repair. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Depot Repair accessible data as well as unauthorized access to critical data or complete access to all Oracle Depot Repair accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:N). |
| Vulnerability in the Oracle Depot Repair product of Oracle E-Business Suite (component: Estimate and Actual Charges). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Depot Repair. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Depot Repair accessible data as well as unauthorized access to critical data or complete access to all Oracle Depot Repair accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). |
| Vulnerability in the Oracle Demand Signal Repository product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Demand Signal Repository. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Demand Signal Repository accessible data as well as unauthorized access to critical data or complete access to all Oracle Demand Signal Repository accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). |
| IBM Langflow OSS 1.0.0 through 1.12.2 could allow a remote authenticated attacker to execute arbitrary code due to improper access control. |
| The User Private Files WordPress plugin before 2.2.0 does not properly protect its stored private files on multisite installations, where the rewrite rule it relies on to route file requests through its access check is never reached, allowing unauthenticated users to retrieve other users' private files directly. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 could allow a remote attacker to bypass security restrictions due to improper authentication. |
| Authentication Bypass Using an Alternate Path or Channel vulnerability in Automattic Jetpack jetpack allows Password Recovery Exploitation.This issue affects Jetpack: from n/a through 16.2. |
| The mod_copy module in ProFTPD 1.3.5 allows remote attackers to read and write to arbitrary files via the site cpfr and site cpto commands. |
| The SKU Error Fixer for WooCommerce WordPress plugin through 1.0 does not perform any capability or nonce checks on two of its AJAX actions, which are also available to unauthenticated users, allowing them to permanently delete product variations it classifies as obsolete, and to disclose those variations' details, with no recoverable copy left behind. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 may not enforce authorization correctly for some web servers. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: preserve user SID across nested backing files
SELinux saves the user file SID in a backing-file security blob so it
remains available after mmap() replaces vma->vm_file with a backing file.
For nested backing files (overlayfs over overlayfs, or FUSE passthrough
backed by overlayfs), user_file may itself be a backing file. Its
fsec->sid is the SID of the mounter that opened it, rather than the user
that opened the top-level file. mprotect() then checks fd { use } against
the mounter SID. This can incorrectly deny access without a domain
transition, or check the wrong target SID after one.
Copy the saved user SID when user_file is a backing file. Keep using the
regular file SID for the first backing layer.
With two nested overlayfs mounts and SELinux enforcing,
mprotect(PROT_READ) returns EACCES with an fd { use } denial against the
mounter SID. With this change, mprotect() succeeds.
Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built
SELinux policy. The original test was also repeated with Fedora Cloud
Base 44 userspace and gave the same result. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: recheck intermediate backing files on mprotect()
mprotect() can be used to bypass the SELinux checks that mmap() performs
against the intermediate layers of a stacked filesystem.
mmap() checks every backing layer as the request descends through the
stack. mprotect() only has the lowest backing file in vma->vm_file, so it
rechecks the top-level user and the lowest mounter, but skips the mounters
of every layer in between. With two nested overlayfs mounts and a policy
denying mounter_t -> middle_file_t:file { execute }, a direct
mmap(PROT_EXEC) is denied:
avc: denied { execute } for pid=71 comm="nested_exec"
path="/payload" dev="overlay" ino=9
scontext=user_u:base_r:mounter_t
tcontext=user_u:object_r:middle_file_t tclass=file permissive=0
while mmap(PROT_NONE) followed by mprotect(PROT_EXEC) succeeds.
Preserve each intermediate path, mounter SID and file-description SID in
the backing-file security blob, copying the saved entries when another
backing layer is opened. Allocate the array only for nested backing files,
and release it and the path references in the backing_file_free hook.
During mprotect(), recheck fd { use } and the requested inode permissions
for every saved mounter, and include the intermediate layers in the execmod
checks. Policy for nested stacking may then need to grant intermediate
mounters what a direct mmap() already requires, and execmod on intermediate
labels for binaries using text relocations.
Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built
SELinux policy, on a mainline tree containing
commit f2381b546e7e ("fs: fix user path of nested backing files").
[PM: subject tweak] |
