| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been found in desmondmorris node-tesseract up to 0.2.7. Affected by this issue is the function process of the file lib/tesseract.js of the component Command Builder. Such manipulation of the argument image leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Use after free in Software Protection Platform (SPP) allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Microsoft PostScript Printer Driver allows an authorized attacker to execute code over a network. |
| Heap-based buffer overflow in Virtual Hard Disk (VHD) Miniport Driver allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Microsoft Azure Attestation service and Device Health Attestation Service allows an unauthorized attacker to disclose information over a network. |
| Heap-based buffer overflow in Reliable Multicast Transport Driver (RMCAST) allows an unauthorized attacker to execute code over an adjacent network. |
| The userspace verifier z_vrfy_rtio_sqe_copy_in_get_handles() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) validated the RTIO object handle and the sqes input array, but not the handle out-parameter. On the first loop iteration it executed *handle = sqe, storing the kernel address of the newly acquired submission-queue entry through a pointer taken verbatim from user mode, with no K_SYSCALL_MEMORY_WRITE check in front of it.
Any user-mode thread that has been granted a struct rtio kernel object can invoke the syscall with an arbitrary address in handle. That is the ordinary way an unprivileged thread uses the RTIO API, for example via sensor_read_async_mempool() or the async ADC helpers, which call rtio_sqe_copy_in_get_handles() internally. The store happens in supervisor mode before any submission-entry validation, so it fires regardless of whether the SQE contents are subsequently rejected. Only builds with CONFIG_USERSPACE and CONFIG_RTIO are affected; without CONFIG_USERSPACE the verifier is not compiled and the caller is already privileged.
The write address is fully attacker-chosen and the written value is a pointer into the caller's own RTIO ring, whose contents the caller controls (the following *sqe = sqes[i] copies an attacker-supplied struct rtio_sqe into that slot). This yields a write-what-where primitive placing a pointer to attacker-controlled data at any kernel address, sufficient to corrupt kernel function pointers, thread structures, or memory-domain partition tables, and thus to escalate from user mode to kernel mode, defeating the isolation boundary CONFIG_USERSPACE is meant to enforce. At minimum it is a reliable kernel memory-corruption and crash primitive. The reporter reproduced the write on qemu_x86: a K_USER thread changed a supervisor global from NULL to a live kernel SQE pointer.
The fix adds K_SYSCALL_MEMORY_WRITE(handle, sizeof(*handle)) (guarded by the existing optional-NULL semantics) before the loop, so the destination must lie in the calling thread's writable memory domain or the thread is terminated by K_OOPS. The neighbouring verifier z_vrfy_rtio_cqe_get_mempool_buffer(), which checked its buff/buff_len out-parameters only for read although the implementation writes through them, was hardened separately by bea93400138 ("rtio: syscalls: validate output params as writable"); that residual was materially weaker, since a read check still confines the target to the caller's own memory domain. |
| Weak authentication in Network Device Enrollment Service (NDES) allows an unauthorized attacker to execute code over a network. |
| The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer.
On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence.
The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer.
The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started. |
| The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The ADI MAX32 driver did not honour that contract. start_read() in drivers/adc/adc_max32.c compared buffer_size, a byte count, against a sample count ((1 + extra_samplings) channels), ignoring sizeof(uint16_t), so it accepted a buffer half the required size. The samples are then stored through the uint16_t data->buffer by Wrap_MXC_ADC_GetData(), which writes two bytes per sample and advances the pointer by one uint16_t: in adc_max32_start_channel() for synchronous reads, and in adc_max32_isr() for asynchronous ones. A sequence selecting two channels with a two-byte buffer, for example, passes the check and has its second sample written past the end of the buffer.
On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to a MAX32 ADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can make the driver write twice as many bytes as its buffer holds. Because the check scales with extra_samplings, the overrun equals the length of the buffer itself, up to channels * 65536 bytes past its end, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence.
The resulting stores are performed by the driver in kernel mode (in the system call itself, the ADC context timer, or the ADC interrupt handler for asynchronous reads), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer.
The fix replaces that check in start_read() with a call to the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c, passing sizeof(uint16_t) as the sample size. The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started. |
| OpenPanel before 3.0.0 contains an unauthenticated ClickHouse sql injection vulnerability that allows remote attackers to inject SQL through the projectId parameter of the /live/visitors/:projectId WebSocket, which lacks session and project-access checks. Attackers can use UNION or boolean count oracles to read other tenants' events and profiles, and project members can similarly inject via the cohort.preview timeframe values. |
| A security vulnerability has been detected in Tencent RapidJSON up to 1.1.0. This issue affects the function GenericStringStream<UTF8<char>>::Take in the library include/rapidjson/stream.h of the component Regex Parser. The manipulation leads to out-of-bounds read. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.6, go-jose parses attacker-controlled RSA modulus and prime values from JWKs without enforcing size and consistency bounds before passing them to crypto/rsa.PrivateKey.Validate. On Go 1.24 and later, crafted large or degenerate RSA parameters can make that validation consume cubic CPU time, allowing remote denial of service in applications that parse JWKs from untrusted sources. This issue is fixed in version 4.1.6. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Essbase accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.5, decrypting untrusted JWE ciphertext with A128CBC-HS256, A192CBC-HS384, or A256CBC-HS512 can pass an empty ciphertext buffer to CBC-HMAC unpadding. Insufficient validation allows the empty buffer to be indexed, causing a panic and denial of service. Applications that decrypt attacker-controlled ciphertext with one of these content-encryption algorithms are affected. This issue is fixed in version 4.1.5. |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.5, parsing attacker-controlled JSON through go-jose allows deeply nested arrays or objects to exceed Go's stack limit. The resulting stack overflow crashes the application and permits denial of service in applications that parse untrusted JSON through go-jose. This issue is fixed in version 4.1.5. |
| Semantic MediaWiki from 2.5.0 before 7.3.1 contains an uncontrolled resource consumption vulnerability that allows anonymous attackers to force quadratic computation by supplying a zero limit to Special:PropertyLabelSimilarity. Attackers can send repeated requests with limit=0 to bypass the SQL LIMIT and trigger pairwise similar_text() comparisons, exhausting PHP CPU, memory, and database connections. |
| Semantic MediaWiki from 3.0.0 before 7.3.0 contains a missing authorization vulnerability in the api.php smwtask module that allows unauthenticated attackers to run admin-only maintenance tasks. Attackers can use the public anonymous CSRF token to read internal store statistics, enqueue jobs like smw.entityIdDisposer, and execute queued jobs, degrading performance and altering semantic data. |
