| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been identified in QMS Automotive (All versions < V12.39), QMS Automotive (All versions < V12.39). User credentials are stored in plaintext in the database without any hashing mechanism. This could allow an attacker to gain access to credentials and impersonate other users. |
| The D-Link DIR-615 device before v20.12PTb04 doesn't use SSL for any of the authenticated pages. Also, it doesn't allow the user to generate his own SSL Certificate. An attacker can simply monitor network traffic to steal a user's credentials and/or credentials of users being added while sniffing the traffic. |
| A vulnerability in the Secure Sockets Layer (SSL) Decryption and Inspection feature of Cisco Firepower System Software 5.4.0, 5.4.1, 6.0.0, 6.1.0, 6.2.0, 6.2.1, and 6.2.2 could allow an unauthenticated, remote attacker to bypass the SSL policy for decrypting and inspecting traffic on an affected system. The vulnerability is due to unexpected interaction with Known Key and Decrypt and Resign configuration settings of SSL policies when the affected software receives unexpected SSL packet headers. An attacker could exploit this vulnerability by sending a crafted SSL packet through an affected device in a valid SSL session. A successful exploit could allow the attacker to bypass the SSL decryption and inspection policy for the affected system, which could allow traffic to flow through the system without being inspected. Cisco Bug IDs: CSCve12652. |
| An issue was discovered on BLU Advance 5.0 and BLU R1 HD devices with Shanghai Adups software. The com.adups.fota.sysoper app is installed as a system app and cannot be disabled by the user. In the com.adups.fota.sysoper app's AndroidManifest.xml file, it sets the android:sharedUserId attribute to a value of android.uid.system which makes it execute as the system user, which is a very privileged user on the device. The app has an exported broadcast receiver named com.adups.fota.sysoper.WriteCommandReceiver which any app on the device can interact with. Therefore, any app can send a command embedded in an intent which will be executed by the WriteCommandReceiver component which is executing as the system user. The third-party app, utilizing the WriteCommandReceiver, can perform the following actions: call a phone number, factory reset the device, take pictures of the screen, record the screen in a video, install applications, inject events, obtain the Android log, and others. In addition, the com.adups.fota.sysoper.TaskService component will make a request to a URL of http://rebootv5.adsunflower.com/ps/fetch.do where the commands in the String array with a key of sf in the JSON Object sent back by the server will be executed as the system user. Since the connection is made via HTTP, it is vulnerable to a MITM attack. |
| A Missing Encryption of Sensitive Data issue was discovered in PDQ Manufacturing LaserWash G5 and G5 S Series all versions, LaserWash M5, all versions, LaserWash 360 and 360 Plus, all versions, LaserWash AutoXpress and AutoExpress Plus, all versions, LaserJet, all versions, ProTouch Tandem, all versions, ProTouch ICON, all versions, and ProTouch AutoGloss, all versions. The username and password are transmitted insecurely. |
| KDE kmail before 5.5.2 and messagelib before 5.5.2, as distributed in KDE Applications before 17.04.2, do not ensure that a plugin's sign/encrypt action occurs during use of the Send Later feature, which allows remote attackers to obtain sensitive information by sniffing the network. |
| The Google I/O 2017 application before 5.1.4 for Android downloads multiple .json files from http://storage.googleapis.com without SSL, which makes it easier for man-in-the-middle attackers to spoof Feed and Schedule data by creating a modified blocks_v4.json file. |
| Trend Micro ServerProtect for Linux 3.0 before CP 1531 allows attackers to eavesdrop and tamper with updates by leveraging unencrypted communications with update servers. |
| An issue was discovered on OnePlus One and X devices. Due to a lenient updater-script on the OnePlus One and X OTA images, the fact that both products use the same OTA verification keys, and the fact that both products share the same 'ro.build.product' system property, attackers can install OTAs of one product over the other, even on locked bootloaders. That could theoretically allow for exploitation of vulnerabilities patched on one image but not on the other, in addition to expansion of the attack surface. Moreover, the vulnerability may result in having the device unusable until a Factory Reset is performed. This vulnerability can be exploited by Man-in-the-Middle (MiTM) attackers targeting the update process. This is possible because the update transaction does not occur over TLS (CVE-2016-10370). In addition, physical attackers can reboot the phone into recovery, and then use 'adb sideload' to push the OTA. |
| An issue was discovered on OnePlus One, X, 2, 3, and 3T devices. Due to a lenient updater-script in the OnePlus OTA images, and the fact that both ROMs use the same OTA verification keys, attackers can install HydrogenOS over OxygenOS and vice versa, even on locked bootloaders, which allows for exploitation of vulnerabilities patched on one image but not on the other, in addition to expansion of the attack surface. This vulnerability can be exploited by Man-in-the-Middle (MiTM) attackers targeting the update process. This is possible because the update transaction does not occur over TLS (CVE-2016-10370). In addition, physical attackers can reboot the phone into recovery, and then use 'adb sideload' to push the OTA (on OnePlus 3/3T 'Secure Start-up' must be off). |
| Wireless IP Camera (P2P) WIFICAM devices rely on a cleartext UDP tunnel protocol (aka the Cloud feature) for communication between an Android application and a camera device, which allows remote attackers to obtain sensitive information by sniffing the network. |
| FusionSphere OpenStack with software V100R006C00SPC102(NFV) and V100R006C10 have an information leak vulnerability. Due to an incorrect configuration item, the information transmitted by a transmission channel is not encrypted. An attacker accessing the internal network may obtain sensitive information transmitted. |
| In PostgreSQL 9.3.x before 9.3.17, 9.4.x before 9.4.12, 9.5.x before 9.5.7, and 9.6.x before 9.6.3, it was found that the PGREQUIRESSL environment variable was no longer enforcing a SSL/TLS connection to a PostgreSQL server. An active Man-in-the-Middle attacker could use this flaw to strip the SSL/TLS protection from a connection between a client and a server. |
| An unintended cleartext issue exists in Go before 1.8.4 and 1.9.x before 1.9.1. RFC 4954 requires that, during SMTP, the PLAIN auth scheme must only be used on network connections secured with TLS. The original implementation of smtp.PlainAuth in Go 1.0 enforced this requirement, and it was documented to do so. In 2013, upstream issue #5184, this was changed so that the server may decide whether PLAIN is acceptable. The result is that if you set up a man-in-the-middle SMTP server that doesn't advertise STARTTLS and does advertise that PLAIN auth is OK, the smtp.PlainAuth implementation sends the username and password. |
| An Information Exposure issue was discovered in ProMinent MultiFLEX M10a Controller web interface. When an authenticated user uses the Change Password feature on the application, the current password for the user is specified in plaintext. This may allow an attacker who has been authenticated to gain access to the password. |
| Encryption key exposure in firmware in iSmartAlarm CubeOne version 2.2.4.8 and earlier allows attackers to decrypt log files via an exposed key. |
| IBM Tivoli Monitoring Portal V6 client could allow a local attacker to gain elevated privileges for IBM Tivoli Monitoring, caused by the default console connection not being encrypted. IBM X-Force ID: 123487. |
| An issue was discovered on BLU R1 HD devices with Shanghai Adups software. The two package names involved in the exfiltration are com.adups.fota and com.adups.fota.sysoper. In the com.adups.fota.sysoper app's AndroidManifest.xml file, it sets the android:sharedUserId attribute to a value of android.uid.system which makes it execute as the system user, which is a very privileged user on the device. Therefore, the app executing as the system user has been granted a number of powerful permissions even though they are not present in the com.adups.fota.sysoper app's AndroidManifest.xml file. This app provides the com.adups.fota app access to the user's call log, text messages, and various device identifiers through the com.adups.fota.sysoper.provider.InfoProvider component. The com.adups.fota app uses timestamps when it runs and is eligible to exfiltrate the user's PII every 72 hours. If 72 hours have passed since the value of the timestamp, then the exfiltration will be triggered by the user plugging in the device to charge or when they leave or enter a wireless network. The exfiltration occurs in the background without any user interaction. |
| An issue was discovered on BLU R1 HD devices with Shanghai Adups software. The content provider named com.adups.fota.sysoper.provider.InfoProvider in the app with a package name of com.adups.fota.sysoper allows any app on the device to read, write, and delete files as the system user. In the com.adups.fota.sysoper app's AndroidManifest.xml file, it sets the android:sharedUserId attribute to a value of android.uid.system which makes it execute as the system user, which is a very privileged user on the device. This allows a third-party app to read, write, and delete the user's sent and received text messages and call log. This allows a third-party app to obtain PII from the user without permission to do so. |
| An issue was discovered on BLU R1 HD devices with Shanghai Adups software. The content provider named com.adups.fota.sysoper.provider.InfoProvider in the app with a package name of com.adups.fota.sysoper allows any app on the device to read, write, and delete files as the system user. In the com.adups.fota.sysoper app's AndroidManifest.xml file, it sets the android:sharedUserId attribute to a value of android.uid.system which makes it execute as the system user, which is a very privileged user on the device. This allows a third-party app to read, write, and delete files owned by the system user. The third-party app can modify the /data/system/users/0/settings_secure.xml file to add an app as a notification listener to be able to receive the text of notifications as they are received on the device. This also allows the /data/system/users/0/accounts.db to be read which contains authentication tokens for various accounts on the device. The third-party app can obtain privileged information and also modify files to obtain more privileges on the device. |
