| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: bound IBI payload to the requested max_payload_len
svc_i3c_master_handle_ibi() reads the IBI payload from the RX FIFO into
the IBI slot. The loop is bounded by the hardware FIFO size
(SVC_I3C_FIFO_SIZE), not by the slot size.
slot->data points into the IBI pool, which i3c_generic_ibi_alloc_pool()
sizes at max_payload_len per slot. svc_i3c_master_request_ibi() only
rejects a max_payload_len larger than SVC_I3C_FIFO_SIZE, so a driver can
request a smaller one. mctp-i3c requests 1. Each readsb() then copies the
controller RXCOUNT bytes (up to 31) with no check against the slot size.
A device that sends more bytes than the slot holds writes past
slot->data, an out-of-bounds write into the IBI pool.
Bound the loop by dev->ibi->max_payload_len and clamp each read to the
space left in the slot, the same way dw-i3c does. A device can still send
more than the requested payload. Flush the leftover bytes from the RX FIFO
so they do not leak into the next transfer. |
| In the Linux kernel, the following vulnerability has been resolved:
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f235d added the mprog query API +
revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (120933984460). That
path has a real population of pre-revision callers. |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| OpenIDC/cjose is a C library implementing the Javascript Object Signing and Encryption (JOSE). Prior to version 0.6.2.5, cjose's JWE decryption path for the AES Key Wrap key-management algorithms (`alg` = `A128KW`, `A192KW`, `A256KW`) does not validate the length of the attacker-supplied `encrypted_key` (JWE Encrypted Key) before unwrapping it into a fixed-size, heap-allocated Content Encryption Key (CEK) buffer. A remote, unauthenticated attacker who can submit a crafted JWE to an application that decrypts it with an AES-KW symmetric key can trigger an out-of-bounds heap write, corrupting the heap. This leads at minimum to a crash (denial of service) and, depending on the heap layout and allocator, may be leverageable for further memory-corruption impact. `cjose_jwe_import()` / `cjose_jwe_decrypt()` are pre-authentication entry points: they parse and process fully attacker-controlled input. Upgrade to cjose 0.6.2.5 to receive a patch. If upgrading is not immediately possible, reject the AES Key Wrap algorithms (`A128KW`/`A192KW`/`A256KW`) for untrusted JWEs at the application layer. |
| Out-of-bounds write in libsavscmn.so prior to One UI 8.5 allows local attackers to execute arbitrary code. |
| Out-of-bounds write in libsthmbc.so prior to One UI 8.5 allows local attackers to write out-of-bounds memory. |
| Out-of-bounds write vulnerability in Citrix Citrix Workspace app for Windows.
This issue affects Citrix Workspace app for Windows: before 2603.11 Current Release (CR), before 2507.1 LTSR CU3, and before LTSR 2607. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/pagewalk: fix stale walk->action escaping walk_pmd_range()
If ->pmd_entry() sets walk->action = ACTION_AGAIN, the pmd_none() check is
retried. The PMD entry may be cleared at the point of retry.
In this case, if walk->ops->install_pte is not specified, the code
continues to the next PMD entry in the range without resetting
walk->action to ACTION_SUBTREE.
This leaves walk->action erroneously set to ACTION_AGAIN, which is
incorrect.
This was incorrect but not problematic up until commit 3b89863c3fa4
("mm/pagewalk: fix race between concurrent split and refault") which
updated walk_pud_range() to check for walk->action == ACTION_AGAIN upon
walk_pmd_range()'s return, causing the PUD walk to be retried.
In this case this results in duplicate walk callbacks being invoked,
which is erroneous and will break any caller that is not idempotent
with respect to this (and waste time for those which are). The result
is an out-of-bounds write, triggered by a local fuzzer:
[ 2.272695] ==================================================================
[ 2.273471] BUG: KASAN: slab-out-of-bounds in __mincore_unmapped_range+0x14f/0x190
[ 2.274302] Write of size 1 at addr ffff888008d9b000 by task poc/106
[ 2.274966]
[ 2.275154] CPU: 0 UID: 1000 PID: 106 Comm: poc Not tainted 7.2.0-rc6-00429-ga7c7074b58d2 #55 PREEMPT(lazy)
[ 2.275159] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 2.275164] Call Trace:
[ 2.275170] <TASK>
[ 2.275172] dump_stack_lvl+0x53/0x70
[ 2.275200] print_report+0xd0/0x630
[ 2.275210] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 2.275219] ? irqentry_exit+0xd2/0x670
[ 2.275224] ? irqentry_exit+0xd2/0x670
[ 2.275226] ? __virt_addr_valid+0xef/0x1a0
[ 2.275239] ? __mincore_unmapped_range+0x14f/0x190
[ 2.275242] kasan_report+0xce/0x100
[ 2.275245] ? __mincore_unmapped_range+0x14f/0x190
[ 2.275248] __mincore_unmapped_range+0x14f/0x190
[ 2.275252] mincore_unmapped_range+0x45/0x70
[ 2.275254] walk_pgd_range+0xafc/0xfc0
[ 2.275261] ? __pfx_walk_pgd_range+0x10/0x10
[ 2.275264] ? __update_load_avg_se+0x3d1/0x670
[ 2.275275] __walk_page_range+0xc0/0x310
[ 2.275278] ? __pfx_find_vma+0x10/0x10
[ 2.275281] ? finish_task_switch.isra.0+0x16d/0x4f0
[ 2.275290] walk_page_range_mm_unsafe+0x26f/0x3a0
[ 2.275293] ? __pfx_mtree_load+0x10/0x10
[ 2.275298] ? __pfx_walk_page_range_mm_unsafe+0x10/0x10
[ 2.275302] ? __free_frozen_pages+0x54d/0x7e0
[ 2.275308] __do_sys_mincore+0x132/0x380
[ 2.275311] do_syscall_64+0xf9/0x540
[ 2.275316] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2.275322] RIP: 0033:0x422ccd
[ 2.275326] Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[ 2.275329] RSP: 002b:00007fffffffec18 EFLAGS: 00000287 ORIG_RAX: 000000000000001b
[ 2.275337] RAX: ffffffffffffffda RBX: 0000000000000066 RCX: 0000000000422ccd
[ 2.275339] RDX: 00000000004d0940 RSI: 0000000001000000 RDI: 00007ffff4000000
[ 2.275340] RBP: 00000000004d0940 R08: 0000000000000100 R09: 0000000000000100
[ 2.275342] R10: 0000000000000100 R11: 0000000000000287 R12: 20c49ba5e353f7cf
[ 2.275343] R13: 00000000004990d3 R14: 0000000000000000 R15: 0000000000000001
[ 2.275346] </TASK>
[ 2.275347]
[ 2.296904] The buggy address belongs to the object at ffff888008d9b000
[ 2.296904] which belongs to the cache sigqueue of size 80
[ 2.298151] The buggy address is located 0 bytes inside of
[ 2.298151] allocated 80-byte region [ffff888008d9b000, ffff888008d9b050)
[ 2.299408]
[ 2.299601] The buggy address belongs to the physical page:
[ 2.300191] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8d9b
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix retry exhaustion in simple ring buffer reader swap
simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
post-decrements it only after a failed link replacement. On the final
attempt, a successful replacement leaves retry at zero, while a failed
replacement leaves it at -1.
The current !retry test reverses both outcomes. It returns an error after
a successful final replacement, leaving the link update complete but the
reader bookkeeping unfinished. After a failed final replacement, it
falls through and updates the head and reader pointers as though the
replacement succeeded, which can corrupt the ring.
Treat only a negative counter as exhaustion and return the documented
-EBUSY error. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject invalid MFT LCNs from boot sector
The NTFS boot sector stores the MFT and MFTMirr locations as unsigned
64-bit LCNs, but parse_ntfs_boot_sector() decoded them into an s64.
A crafted high-bit value could therefore become negative and pass
the existing upper-bound check. The invalid value then propagated into
the MFT zone allocator and could result in an out-of-bounds access to
lcn_empty_bits_per_page. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate non-resident attribute offsets
ntfs_attr_update_meta() shifts the attribute name when converting between
non-sparse and sparse attributes. Converting to sparse also adds the
compressed_size field before the name and mapping pairs, requiring eight
additional bytes in the attribute record.
However, the validator does not check that name_offset is within safe
boundaries for these operations or that the additional space is available.
A malicious MFT record could set name_offset such that:
1. The name is positioned at the very end of a non-sparse attribute.
Converting to sparse would shift the name forward by 8 bytes,
writing beyond the attribute boundary.
2. The name overlaps with the mapping pairs, causing corruption during
conversion.
Add validation to ensure:
- For named attributes, name_offset is within valid bounds
- Name does not extend beyond the attribute or overlap with mapping pairs
- For non-sparse, non-compressed attributes, eight bytes are available
after mapping_pairs_offset for the compressed_size field
The space check also covers unnamed attributes, for which name_offset = 0
is valid and no name range needs to be checked. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: verify run length exceeding volume boundary
The mapping pairs decoder validates that the starting LCN is within the
volume but does not check if the run extends beyond the volume boundary.
A malformed NTFS image with a crafted mapping pairs array could cause
the kernel to access memory beyond the volume boundary, potentially leading
to memory corruption and privilege escalation.
Add validation to ensure lcn + length stays within nr_clusters. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: panasonic-laptop: Fix sentinel write past pcc->sinf[]
acpi_pcc_retrieve_biosdata() rejects SINF packages only when
pcc->num_sifr is strictly less than hkey->package.count, then
unconditionally writes a trailing sentinel at
pcc->sinf[hkey->package.count]. But pcc->sinf[] is allocated with
exactly pcc->num_sifr elements (valid indices 0..num_sifr-1), so that
write needs num_sifr strictly greater than package.count to stay in
bounds -- num_sifr == package.count passes the existing check but
still overflows by one element.
This is exactly the case probe()'s existing num_sifr++ workaround
("Some DSDT-s have an off-by-one bug where the SINF package count is
one higher than the SQTY reported value") is written to accommodate:
when a DSDT's SINF package count equals SQTY+1, the workaround makes
num_sifr equal to package.count, which is precisely the boundary that
overflows here. Found via UBSan (array-index-out-of-bounds) on
hardware where HKEY.SQTY returns 37 and HKEY.SINF()'s package has 38
elements: num_sifr becomes 38 after the += 1 workaround, the loop
correctly fills indices 0..37, and the sentinel write then targets
index 38, one past the end -- a silent 4-byte heap overflow on kernels
without CONFIG_UBSAN.
Tightening the rejection check to num_sifr <= package.count would
avoid the overflow but breaks probe() entirely on exactly this
hardware, since num_sifr == package.count is the case the off-by-one
workaround exists to support. Nothing else in the driver reads this
sentinel value back, so simply skip the write when there is no room
for it instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: bound the peer rkey counts in SMC-Rv2 LLC messages
On a link whose device has max_recv_sge == 1 there is no shared v2 receive
buffer, and smc_llc_save_add_link_rkeys() takes the v2 extension from 44
bytes past the start of the queue entry's inline message:
ext = (struct smc_llc_msg_add_link_v2_ext *)(llc_msg + SMC_WR_TX_SIZE);
The entry is a 72-byte allocation and the extension starts at offset 68, so
ext->num_rkeys at offset 94 is already past it. This happens on every
SMC-Rv2 link addition, whatever the peer sends:
[ 2.490065] BUG: KASAN: slab-out-of-bounds in smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490431] Read of size 2 at addr ffff8880056406de by task smctest/106
[ 2.490709]
[ 2.490792] CPU: 0 UID: 0 PID: 106 Comm: smctest Not tainted 7.2.0-rc5-p1-g77a5d9d9c99f #32 PREEMPT(lazy)
[ 2.490795] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 2.490798] Call Trace:
[ 2.490803] <TASK>
[ 2.490805] dump_stack_lvl+0x53/0x70
[ 2.490810] print_report+0xd0/0x630
[ 2.490828] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 2.490832] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490834] kasan_report+0xce/0x100
[ 2.490836] ? smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490837] smc_llc_save_add_link_rkeys+0x333/0x350
[ 2.490839] ? smcr_buf_map_lgr+0x1bf/0x2b0
[ 2.490844] smc_llc_cli_add_link+0xca7/0x1e80
[ 2.490848] ? smc_llc_wait+0x355/0x810
[ 2.490850] ? __pfx_smc_llc_wait+0x10/0x10
[ 2.490851] ? __pfx_smc_llc_cli_add_link+0x10/0x10
[ 2.490853] ? __pfx_autoremove_wake_function+0x10/0x10
[ 2.490863] __smc_connect+0x3f5c/0x4980
[ 2.490873] ? __pfx_kernel_connect+0x10/0x10
[ 2.490888] ? __pfx___smc_connect+0x10/0x10
[ 2.490891] ? release_sock+0x148/0x1d0
[ 2.490894] smc_connect+0x42c/0x580
[ 2.490896] __sys_connect+0xfc/0x130
[ 2.490898] ? __pfx___sys_connect+0x10/0x10
[ 2.490900] ? handle_mm_fault+0x1a1/0x430
[ 2.490908] __x64_sys_connect+0x6d/0xb0
[ 2.490909] ? fpregs_assert_state_consistent+0x56/0xe0
[ 2.490917] do_syscall_64+0xf9/0x540
[ 2.490921] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2.490924] RIP: 0033:0x421bb4
[ 2.490927] Code: ff f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d ad 34 09 00 00 74 13 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 55
[ 2.490929] RSP: 002b:00007ffd473b01a8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
[ 2.490935] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000421bb4
[ 2.490936] RDX: 0000000000000010 RSI: 00007ffd473b01d0 RDI: 0000000000000003
[ 2.490937] RBP: 0000000000003930 R08: 0000000000000004 R09: 0000000000000000
[ 2.490938] R10: 00007ffd473b0f98 R11: 0000000000000202 R12: 0000000000000006
[ 2.490939] R13: 00007ffd473b0f87 R14: 0000000000000003 R15: 00007ffd473b0f90
[ 2.490940] </TASK>
[ 2.490941]
[ 2.499545] Allocated by task 44:
[ 2.499693] kasan_save_stack+0x33/0x60
[ 2.499860] kasan_save_track+0x14/0x30
[ 2.500026] __kasan_kmalloc+0x8f/0xa0
[ 2.500190] __kmalloc_cache_noprof+0x158/0x370
[ 2.500393] smc_llc_enqueue+0x72/0x560
[ 2.500559] smc_wr_rx_tasklet_fn+0x474/0xa80
[ 2.500747] tasklet_action_common+0x20f/0x8a0
[ 2.500945] handle_softirqs+0x18e/0x590
[ 2.501115] do_softirq+0x3b/0x60
[ 2.501266] __local_bh_enable_ip+0x61/0x70
[ 2.501446] __alloc_skb+0x732/0x890
[ 2.501604] rxe_init_packet+0x16b/0x4f0
[ 2.501783] prepare_ack_packet+0xb8/0x830
[ 2.501962] rxe_receiver+0x495/0x96e0
[ 2.502125] do_work+0x144/0x470
[ 2.502269] process_one_work+0x633/0x1030
[ 2.502450] worker_thread+0x45b/0xd10
[ 2.50261
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: rtl8192du: check QoS TID before indexing tids
rtl92du_tx_fill_desc() uses ieee80211_get_tid() to read the QoS TID
from the 802.11 header and then uses it as an index into
sta_entry->tids[]. ieee80211_get_tid() returns the low 4-bit QoS TID
value, so the result can be in the range 0..15.
rtlwifi only allocates MAX_TID_COUNT entries for sta_entry->tids[], and
MAX_TID_COUNT is 9. A QoS TID greater than 8 therefore indexes past the
aggregation state array. Keep the default RTL_AGG_STOP state for
out-of-range TIDs, matching rtl92cu_tx_fill_desc().
This issue was detected by our static analysis tool and confirmed by
manual audit. UBSAN validation for the same bug pattern reports an
array-index-out-of-bounds access with index 10 for type
'rtl_tid_data [9]'. |
| Issue summary: OpenSSL CMS decryption sizes the key-unwrap output buffer based
on querying the unwrapped key size, but the AES-WRAP-PAD unwrap primitive
can write and cleanse more bytes than that query reports, causing an 8-byte
out-of-bounds heap write.
Impact summary: An attacker who supplies a crafted CMS message can trigger a
deterministic 8-byte out-of-bounds heap write when the victim decrypts it
with CMS_decrypt(), corrupting the heap and typically resulting in a Denial
of Service.
CWE: CWE-787: Out-of-bounds Write
Description: The key-wrap OID is potentially attacker-controlled on the wire.
CMS unwrapping allows both id-aesNNN-wrap-pad and id-aesNNN-wrap ciphers.
An attacker can take a legitimate message and change a single OID byte to
select the padded variant while leaving the message otherwise valid. Since
the unwrap key is derived from the recipient's private operation (ECDH key
agreement or ML-KEM decapsulation), the RFC 5649 integrity check cannot
pass, and the decryption fails with integrity failure.
The write is a fixed-size (8-byte), fixed-value (zero) heap overflow
immediately past the allocation, requires no special configuration, and is
reachable from the public CMS_decrypt() function. The consequence is
a heap corruption leading to a Denial of Service. The fix in the CMS code
sizes the unwrap output buffer for the worst case so a failed unwrap cannot
write past the allocation.
FIPS impact: no
As the CMS code lives outside the FIPS module boundary, no FIPS
modules are affected by this CVE. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate on-media seg_num against the cache device size
seg_num is read from the crc32c-only superblock, so whoever supplies the
cache device on a table load (CAP_SYS_ADMIN) controls it. It sizes
cache->segments[] and is the value every later on-media segment id is
bounded against, yet it is never checked against the device. Because
cache_dev->mapping is the direct map of the pmem, CACHE_DEV_SEGMENT() for
a segment id past the device resolves to ordinary kernel memory beyond
the mapping; a new-cache init reaching such an id has cache_seg_init() ->
cache_dev_zero_range() memset() 12 KiB over that memory -- an
out-of-bounds write into the kernel heap at table load. A zero seg_num
makes the segment allocations ZERO_SIZE_PTR.
Reject a seg_num that is zero, larger than the device can hold, or larger
than PCACHE_CACHE_SEGS_MAX before it is used. |
| The MongoDB BI Connector ODBC Driver converts floating point column values into text without checking that the result fits within the destination buffer. When an application reads a sufficiently large floating point value as text, the driver may write beyond the end of that buffer and corrupt adjacent memory. A user who can store data in a collection read through the BI Connector could use this to crash the application performing the read. |
| PJSIP is a free and open source multimedia communication library written in C. Prior to commit 673b978, a remote out-of-bounds read and write can occur in the SDP negotiator when the remote payload-type map maintenance feature is enabled. assign_pt_and_update_map() in pjmedia/src/pjmedia/sdp_neg.c uses payload-type numbers taken from a remote SDP offer or answer to index fixed-size internal tables without sufficient bounds validation, so a crafted remote SDP can cause memory access outside those tables. The practical impact is memory corruption and denial of service; code execution is not demonstrated. This path is only reached when PJMEDIA_SDP_NEG_MAINTAIN_REMOTE_PT_MAP is enabled. The default is disabled, so default builds are not affected; the feature is an interoperability option that integrating products may enable. This issue has been patched via commit 673b978. |
