| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix possible crash when setting up bsg fails
If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value.
Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)"
will not be satisfied, preventing execution from entering
bsg_remove_queue(), which could lead to the following crash:
BUG: kernel NULL pointer dereference, address: 000000000000041c
Call Trace:
<TASK>
mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr]
mpi3mr_remove+0x6f/0x340 [mpi3mr]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19d/0x220
unbind_store+0xa4/0xb0
kernfs_fop_write_iter+0x11f/0x200
vfs_write+0x1fc/0x3e0
ksys_write+0x67/0xe0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x78/0xe2 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix implicit ODP use after free
Prevent double queueing of implicit ODP mr destroy work by using
__xa_cmpxchg() to make sure this is the only time we are destroying this
specific mr.
Without this change, we could try to invalidate this mr twice, which in
turn could result in queuing a MR work destroy twice, and eventually the
second work could execute after the MR was freed due to the first work,
causing a user after free and trace below.
refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 12178 at lib/refcount.c:28 refcount_warn_saturate+0x12b/0x130
Modules linked in: bonding ib_ipoib vfio_pci ip_gre geneve nf_tables ip6_gre gre ip6_tunnel tunnel6 ipip tunnel4 ib_umad rdma_ucm mlx5_vfio_pci vfio_pci_core vfio_iommu_type1 mlx5_ib vfio ib_uverbs mlx5_core iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]
CPU: 2 PID: 12178 Comm: kworker/u20:5 Not tainted 6.5.0-rc1_net_next_mlx5_58c644e #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events_unbound free_implicit_child_mr_work [mlx5_ib]
RIP: 0010:refcount_warn_saturate+0x12b/0x130
Code: 48 c7 c7 38 95 2a 82 c6 05 bc c6 fe 00 01 e8 0c 66 aa ff 0f 0b 5b c3 48 c7 c7 e0 94 2a 82 c6 05 a7 c6 fe 00 01 e8 f5 65 aa ff <0f> 0b 5b c3 90 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13 8d 50 ff
RSP: 0018:ffff8881008e3e40 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027
RDX: ffff88852c91b5c8 RSI: 0000000000000001 RDI: ffff88852c91b5c0
RBP: ffff8881dacd4e00 R08: 00000000ffffffff R09: 0000000000000019
R10: 000000000000072e R11: 0000000063666572 R12: ffff88812bfd9e00
R13: ffff8881c792d200 R14: ffff88810011c005 R15: ffff8881002099c0
FS: 0000000000000000(0000) GS:ffff88852c900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5694b5e000 CR3: 00000001153f6003 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? refcount_warn_saturate+0x12b/0x130
free_implicit_child_mr_work+0x180/0x1b0 [mlx5_ib]
process_one_work+0x1cc/0x3c0
worker_thread+0x218/0x3c0
kthread+0xc6/0xf0
ret_from_fork+0x1f/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
mm: clear uffd-wp PTE/PMD state on mremap()
When mremap()ing a memory region previously registered with userfaultfd as
write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in
flag clearing leads to a mismatch between the vma flags (which have
uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp
cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to
trigger a warning in page_table_check_pte_flags() due to setting the pte
to writable while uffd-wp is still set.
Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any
such mremap() so that the values are consistent with the existing clearing
of VM_UFFD_WP. Be careful to clear the logical flag regardless of its
physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE,
huge PMD and hugetlb paths. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double free of TCP_Server_Info::hostname
When shutting down the server in cifs_put_tcp_session(), cifsd thread
might be reconnecting to multiple DFS targets before it realizes it
should exit the loop, so @server->hostname can't be freed as long as
cifsd thread isn't done. Otherwise the following can happen:
RIP: 0010:__slab_free+0x223/0x3c0
Code: 5e 41 5f c3 cc cc cc cc 4c 89 de 4c 89 cf 44 89 44 24 08 4c 89
1c 24 e8 fb cf 8e 00 44 8b 44 24 08 4c 8b 1c 24 e9 5f fe ff ff <0f>
0b 41 f7 45 08 00 0d 21 00 0f 85 2d ff ff ff e9 1f ff ff ff 80
RSP: 0018:ffffb26180dbfd08 EFLAGS: 00010246
RAX: ffff8ea34728e510 RBX: ffff8ea34728e500 RCX: 0000000000800068
RDX: 0000000000800068 RSI: 0000000000000000 RDI: ffff8ea340042400
RBP: ffffe112041ca380 R08: 0000000000000001 R09: 0000000000000000
R10: 6170732e31303000 R11: 70726f632e786563 R12: ffff8ea34728e500
R13: ffff8ea340042400 R14: ffff8ea34728e500 R15: 0000000000800068
FS: 0000000000000000(0000) GS:ffff8ea66fd80000(0000)
000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffc25376080 CR3: 000000012a2ba001 CR4:
PKRU: 55555554
Call Trace:
<TASK>
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? __reconnect_target_unlocked+0x3e/0x160 [cifs]
? __die_body.cold+0x8/0xd
? die+0x2b/0x50
? do_trap+0xce/0x120
? __slab_free+0x223/0x3c0
? do_error_trap+0x65/0x80
? __slab_free+0x223/0x3c0
? exc_invalid_op+0x4e/0x70
? __slab_free+0x223/0x3c0
? asm_exc_invalid_op+0x16/0x20
? __slab_free+0x223/0x3c0
? extract_hostname+0x5c/0xa0 [cifs]
? extract_hostname+0x5c/0xa0 [cifs]
? __kmalloc+0x4b/0x140
__reconnect_target_unlocked+0x3e/0x160 [cifs]
reconnect_dfs_server+0x145/0x430 [cifs]
cifs_handle_standard+0x1ad/0x1d0 [cifs]
cifs_demultiplex_thread+0x592/0x730 [cifs]
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
kthread+0xdd/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: avoid NULL pointer dereference if no valid extent tree
[BUG]
Syzbot reported a crash with the following call trace:
BTRFS info (device loop0): scrub: started on devid 1
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs]
scrub_simple_mirror+0x175/0x260 [btrfs]
scrub_stripe+0x5d4/0x6c0 [btrfs]
scrub_chunk+0xbb/0x170 [btrfs]
scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs]
btrfs_scrub_dev+0x240/0x600 [btrfs]
btrfs_ioctl+0x1dc8/0x2fa0 [btrfs]
? do_sys_openat2+0xa5/0xf0
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
[CAUSE]
The reproducer is using a corrupted image where extent tree root is
corrupted, thus forcing to use "rescue=all,ro" mount option to mount the
image.
Then it triggered a scrub, but since scrub relies on extent tree to find
where the data/metadata extents are, scrub_find_fill_first_stripe()
relies on an non-empty extent root.
But unfortunately scrub_find_fill_first_stripe() doesn't really expect
an NULL pointer for extent root, it use extent_root to grab fs_info and
triggered a NULL pointer dereference.
[FIX]
Add an extra check for a valid extent root at the beginning of
scrub_find_fill_first_stripe().
The new error path is introduced by 42437a6386ff ("btrfs: introduce
mount option rescue=ignorebadroots"), but that's pretty old, and later
commit b979547513ff ("btrfs: scrub: introduce helper to find and fill
sector info for a scrub_stripe") changed how we do scrub.
So for kernels older than 6.6, the fix will need manual backport. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur
scsi_execute_cmd() function can return both negative (linux codes) and
positive (scsi_cmnd result field) error codes.
Currently the driver just passes error codes of scsi_execute_cmd() to
hwmon core, which is incorrect because hwmon only checks for negative
error codes. This leads to hwmon reporting uninitialized data to
userspace in case of SCSI errors (for example if the disk drive was
disconnected).
This patch checks scsi_execute_cmd() output and returns -EIO if it's
error code is positive.
[groeck: Avoid inline variable declaration for portability] |
| In the Linux kernel, the following vulnerability has been resolved:
rds: sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The per-netns structure can be obtained from the table->data using
container_of(), then the 'net' one can be retrieved from the listen
socket (if available). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode
ath11k_hal_srng_* should be used with srng->lock to protect srng data.
For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(),
they use ath11k_hal_srng_* for many times but never call srng->lock.
So when running (full) monitor mode, warning will occur:
RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
Call Trace:
? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k]
? idr_alloc_u32+0x97/0xd0
ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k]
ath11k_dp_service_srng+0x289/0x5a0 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k]
__napi_poll+0x30/0x1f0
net_rx_action+0x198/0x320
__do_softirq+0xdd/0x319
So add srng->lock for them to avoid such warnings.
Inorder to fetch the srng->lock, should change srng's definition from
'void' to 'struct hal_srng'. And initialize them elsewhere to prevent
one line of code from being too long. This is consistent with other ring
process functions, such as ath11k_dp_process_rx().
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-dai: Ensure DAI widget is valid during params
Each cpu DAI should associate with a widget. However, the topology might
not create the right number of DAI widgets for aggregated amps. And it
will cause NULL pointer deference.
Check that the DAI widget associated with the CPU DAI is valid to prevent
NULL pointer deference due to missing DAI widgets in topologies with
aggregated amps. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar()
In commit 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update
inbound map address") set_bar() was modified to support dynamically
changing the backing physical address of a BAR that was already configured.
This means that set_bar() can be called twice, without ever calling
clear_bar() (as calling clear_bar() would clear the BAR's PCI address
assigned by the host).
This can only be done if the new BAR size/flags does not differ from the
existing BAR configuration. Add these missing checks.
If we allow set_bar() to set e.g. a new BAR size that differs from the
existing BAR size, the new address translation range will be smaller than
the BAR size already determined by the host, which would mean that a read
past the new BAR size would pass the iATU untranslated, which could allow
the host to read memory not belonging to the new struct pci_epf_bar.
While at it, add comments which clarifies the support for dynamically
changing the physical address of a BAR. (Which was also missing.) |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW
Power Hypervisor can possibily allocate MMIO window intersecting with
Dynamic DMA Window (DDW) range, which is over 32-bit addressing.
These MMIO pages needs to be marked as reserved so that IOMMU doesn't map
DMA buffers in this range.
The current code is not marking these pages correctly which is resulting
in LPAR to OOPS while booting. The stack is at below
BUG: Unable to handle kernel data access on read at 0xc00800005cd40000
Faulting instruction address: 0xc00000000005cdac
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: af_packet rfkill ibmveth(X) lpfc(+) nvmet_fc nvmet nvme_keyring crct10dif_vpmsum nvme_fc nvme_fabrics nvme_core be2net(+) nvme_auth rtc_generic nfsd auth_rpcgss nfs_acl lockd grace sunrpc fuse configfs ip_tables x_tables xfs libcrc32c dm_service_time ibmvfc(X) scsi_transport_fc vmx_crypto gf128mul crc32c_vpmsum dm_mirror dm_region_hash dm_log dm_multipath dm_mod sd_mod scsi_dh_emc scsi_dh_rdac scsi_dh_alua t10_pi crc64_rocksoft_generic crc64_rocksoft sg crc64 scsi_mod
Supported: Yes, External
CPU: 8 PID: 241 Comm: kworker/8:1 Kdump: loaded Not tainted 6.4.0-150600.23.14-default #1 SLE15-SP6 b44ee71c81261b9e4bab5e0cde1f2ed891d5359b
Hardware name: IBM,9080-M9S POWER9 (raw) 0x4e2103 0xf000005 of:IBM,FW950.B0 (VH950_149) hv:phyp pSeries
Workqueue: events work_for_cpu_fn
NIP: c00000000005cdac LR: c00000000005e830 CTR: 0000000000000000
REGS: c00001400c9ff770 TRAP: 0300 Not tainted (6.4.0-150600.23.14-default)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24228448 XER: 00000001
CFAR: c00000000005cdd4 DAR: c00800005cd40000 DSISR: 40000000 IRQMASK: 0
GPR00: c00000000005e830 c00001400c9ffa10 c000000001987d00 c00001400c4fe800
GPR04: 0000080000000000 0000000000000001 0000000004000000 0000000000800000
GPR08: 0000000004000000 0000000000000001 c00800005cd40000 ffffffffffffffff
GPR12: 0000000084228882 c00000000a4c4f00 0000000000000010 0000080000000000
GPR16: c00001400c4fe800 0000000004000000 0800000000000000 c00000006088b800
GPR20: c00001401a7be980 c00001400eff3800 c000000002a2da68 000000000000002b
GPR24: c0000000026793a8 c000000002679368 000000000000002a c0000000026793c8
GPR28: 000008007effffff 0000080000000000 0000000000800000 c00001400c4fe800
NIP [c00000000005cdac] iommu_table_reserve_pages+0xac/0x100
LR [c00000000005e830] iommu_init_table+0x80/0x1e0
Call Trace:
[c00001400c9ffa10] [c00000000005e810] iommu_init_table+0x60/0x1e0 (unreliable)
[c00001400c9ffa90] [c00000000010356c] iommu_bypass_supported_pSeriesLP+0x9cc/0xe40
[c00001400c9ffc30] [c00000000005c300] dma_iommu_dma_supported+0xf0/0x230
[c00001400c9ffcb0] [c00000000024b0c4] dma_supported+0x44/0x90
[c00001400c9ffcd0] [c00000000024b14c] dma_set_mask+0x3c/0x80
[c00001400c9ffd00] [c0080000555b715c] be_probe+0xc4/0xb90 [be2net]
[c00001400c9ffdc0] [c000000000986f3c] local_pci_probe+0x6c/0x110
[c00001400c9ffe40] [c000000000188f28] work_for_cpu_fn+0x38/0x60
[c00001400c9ffe70] [c00000000018e454] process_one_work+0x314/0x620
[c00001400c9fff10] [c00000000018f280] worker_thread+0x2b0/0x620
[c00001400c9fff90] [c00000000019bb18] kthread+0x148/0x150
[c00001400c9fffe0] [c00000000000ded8] start_kernel_thread+0x14/0x18
There are 2 issues in the code
1. The index is "int" while the address is "unsigned long". This results in
negative value when setting the bitmap.
2. The DMA offset is page shifted but the MMIO range is used as-is (64-bit
address). MMIO address needs to be page shifted as well. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: state: fix out-of-bounds read during lookup
lookup and resize can run in parallel.
The xfrm_state_hash_generation seqlock ensures a retry, but the hash
functions can observe a hmask value that is too large for the new hlist
array.
rehash does:
rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..]
net->xfrm.state_hmask = nhashmask;
While state lookup does:
h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {
This is only safe in case the update to state_bydst is larger than
net->xfrm.xfrm_state_hmask (or if the lookup function gets
serialized via state spinlock again).
Fix this by prefetching state_hmask and the associated pointers.
The xfrm_state_hash_generation seqlock retry will ensure that the pointer
and the hmask will be consistent.
The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side,
add lockdep assertions to document that they are only safe for insert
side.
xfrm_state_lookup_byaddr() uses the spinlock rather than RCU.
AFAICS this is an oversight from back when state lookup was converted to
RCU, this lock should be replaced with RCU in a future patch. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do proper folio cleanup when cow_file_range() failed
[BUG]
When testing with COW fixup marked as BUG_ON() (this is involved with the
new pin_user_pages*() change, which should not result new out-of-band
dirty pages), I hit a crash triggered by the BUG_ON() from hitting COW
fixup path.
This BUG_ON() happens just after a failed btrfs_run_delalloc_range():
BTRFS error (device dm-2): failed to run delalloc range, root 348 ino 405 folio 65536 submit_bitmap 6-15 start 90112 len 106496: -28
------------[ cut here ]------------
kernel BUG at fs/btrfs/extent_io.c:1444!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 0 UID: 0 PID: 434621 Comm: kworker/u24:8 Tainted: G OE 6.12.0-rc7-custom+ #86
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : extent_writepage_io+0x2d4/0x308 [btrfs]
lr : extent_writepage_io+0x2d4/0x308 [btrfs]
Call trace:
extent_writepage_io+0x2d4/0x308 [btrfs]
extent_writepage+0x218/0x330 [btrfs]
extent_write_cache_pages+0x1d4/0x4b0 [btrfs]
btrfs_writepages+0x94/0x150 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x88/0xc8
start_delalloc_inodes+0x180/0x3b0 [btrfs]
btrfs_start_delalloc_roots+0x174/0x280 [btrfs]
shrink_delalloc+0x114/0x280 [btrfs]
flush_space+0x250/0x2f8 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x164/0x408
worker_thread+0x25c/0x388
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: aa1403e1 9402f3ef aa1403e0 9402f36f (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
That failure is mostly from cow_file_range(), where we can hit -ENOSPC.
Although the -ENOSPC is already a bug related to our space reservation
code, let's just focus on the error handling.
For example, we have the following dirty range [0, 64K) of an inode,
with 4K sector size and 4K page size:
0 16K 32K 48K 64K
|///////////////////////////////////////|
|#######################################|
Where |///| means page are still dirty, and |###| means the extent io
tree has EXTENT_DELALLOC flag.
- Enter extent_writepage() for page 0
- Enter btrfs_run_delalloc_range() for range [0, 64K)
- Enter cow_file_range() for range [0, 64K)
- Function btrfs_reserve_extent() only reserved one 16K extent
So we created extent map and ordered extent for range [0, 16K)
0 16K 32K 48K 64K
|////////|//////////////////////////////|
|<- OE ->|##############################|
And range [0, 16K) has its delalloc flag cleared.
But since we haven't yet submit any bio, involved 4 pages are still
dirty.
- Function btrfs_reserve_extent() returns with -ENOSPC
Now we have to run error cleanup, which will clear all
EXTENT_DELALLOC* flags and clear the dirty flags for the remaining
ranges:
0 16K 32K 48K 64K
|////////| |
| | |
Note that range [0, 16K) still has its pages dirty.
- Some time later, writeback is triggered again for the range [0, 16K)
since the page range still has dirty flags.
- btrfs_run_delalloc_range() will do nothing because there is no
EXTENT_DELALLOC flag.
- extent_writepage_io() finds page 0 has no ordered flag
Which falls into the COW fixup path, triggering the BUG_ON().
Unfortunately this error handling bug dates back to the introduction of
btrfs. Thankfully with the abuse of COW fixup, at least it won't crash
the kernel.
[FIX]
Instead of immediately unlocking the extent and folios, we keep the extent
and folios locked until either erroring out or the whole delalloc range
finished.
When the whole delalloc range finished without error, we just unlock the
whole range with PAGE_SET_ORDERED (and PAGE_UNLOCK for !keep_locked
cases)
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
udp: Deal with race between UDP socket address change and rehash
If a UDP socket changes its local address while it's receiving
datagrams, as a result of connect(), there is a period during which
a lookup operation might fail to find it, after the address is changed
but before the secondary hash (port and address) and the four-tuple
hash (local and remote ports and addresses) are updated.
Secondary hash chains were introduced by commit 30fff9231fad ("udp:
bind() optimisation") and, as a result, a rehash operation became
needed to make a bound socket reachable again after a connect().
This operation was introduced by commit 719f835853a9 ("udp: add
rehash on connect()") which isn't however a complete fix: the
socket will be found once the rehashing completes, but not while
it's pending.
This is noticeable with a socat(1) server in UDP4-LISTEN mode, and a
client sending datagrams to it. After the server receives the first
datagram (cf. _xioopen_ipdgram_listen()), it issues a connect() to
the address of the sender, in order to set up a directed flow.
Now, if the client, running on a different CPU thread, happens to
send a (subsequent) datagram while the server's socket changes its
address, but is not rehashed yet, this will result in a failed
lookup and a port unreachable error delivered to the client, as
apparent from the following reproducer:
LEN=$(($(cat /proc/sys/net/core/wmem_default) / 4))
dd if=/dev/urandom bs=1 count=${LEN} of=tmp.in
while :; do
taskset -c 1 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc &
sleep 0.1 || sleep 1
taskset -c 2 socat OPEN:tmp.in UDP4:localhost:1337,shut-null
wait
done
where the client will eventually get ECONNREFUSED on a write()
(typically the second or third one of a given iteration):
2024/11/13 21:28:23 socat[46901] E write(6, 0x556db2e3c000, 8192): Connection refused
This issue was first observed as a seldom failure in Podman's tests
checking UDP functionality while using pasta(1) to connect the
container's network namespace, which leads us to a reproducer with
the lookup error resulting in an ICMP packet on a tap device:
LOCAL_ADDR="$(ip -j -4 addr show|jq -rM '.[] | .addr_info[0] | select(.scope == "global").local')"
while :; do
./pasta --config-net -p pasta.pcap -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,trunc &
sleep 0.2 || sleep 1
socat OPEN:tmp.in UDP4:${LOCAL_ADDR}:1337,shut-null
wait
cmp tmp.in tmp.out
done
Once this fails:
tmp.in tmp.out differ: char 8193, line 29
we can finally have a look at what's going on:
$ tshark -r pasta.pcap
1 0.000000 :: ? ff02::16 ICMPv6 110 Multicast Listener Report Message v2
2 0.168690 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
3 0.168767 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
4 0.168806 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
5 0.168827 c6:47:05:8d:dc:04 ? Broadcast ARP 42 Who has 88.198.0.161? Tell 88.198.0.164
6 0.168851 9a:55:9a:55:9a:55 ? c6:47:05:8d:dc:04 ARP 42 88.198.0.161 is at 9a:55:9a:55:9a:55
7 0.168875 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
8 0.168896 88.198.0.164 ? 88.198.0.161 ICMP 590 Destination unreachable (Port unreachable)
9 0.168926 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
10 0.168959 88.198.0.161 ? 88.198.0.164 UDP 8234 60260 ? 1337 Len=8192
11 0.168989 88.198.0.161 ? 88.198.0.164 UDP 4138 60260 ? 1337 Len=4096
12 0.169010 88.198.0.161 ? 88.198.0.164 UDP 42 60260 ? 1337 Len=0
On the third datagram received, the network namespace of the container
initiates an ARP lookup to deliver the ICMP message.
In another variant of this reproducer, starting the client with:
strace -f pasta --config-net -u 1337 socat UDP4-LISTEN:1337,null-eof OPEN:tmp.out,create,tru
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker
After commit
746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM")
amdgpu started seeing the following warning:
[ ] workqueue: WQ_MEM_RECLAIM sdma0:drm_sched_run_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM events:amdgpu_device_delay_enable_gfx_off [amdgpu]
...
[ ] Workqueue: sdma0 drm_sched_run_job_work [gpu_sched]
...
[ ] Call Trace:
[ ] <TASK>
...
[ ] ? check_flush_dependency+0xf5/0x110
...
[ ] cancel_delayed_work_sync+0x6e/0x80
[ ] amdgpu_gfx_off_ctrl+0xab/0x140 [amdgpu]
[ ] amdgpu_ring_alloc+0x40/0x50 [amdgpu]
[ ] amdgpu_ib_schedule+0xf4/0x810 [amdgpu]
[ ] ? drm_sched_run_job_work+0x22c/0x430 [gpu_sched]
[ ] amdgpu_job_run+0xaa/0x1f0 [amdgpu]
[ ] drm_sched_run_job_work+0x257/0x430 [gpu_sched]
[ ] process_one_work+0x217/0x720
...
[ ] </TASK>
The intent of the verifcation done in check_flush_depedency is to ensure
forward progress during memory reclaim, by flagging cases when either a
memory reclaim process, or a memory reclaim work item is flushed from a
context not marked as memory reclaim safe.
This is correct when flushing, but when called from the
cancel(_delayed)_work_sync() paths it is a false positive because work is
either already running, or will not be running at all. Therefore
cancelling it is safe and we can relax the warning criteria by letting the
helper know of the calling context.
References: 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM") |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
The driver, through the SAS transport, exposes a sysfs interface to
enable/disable PHYs in a controller/expander setup. When multiple PHYs
are disabled and enabled in rapid succession, the persistent and current
config pages related to SAS IO unit/SAS Expander pages could get
corrupted.
Use separate memory for each config request. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages()
Fix an unwind issue in mlx5vf_add_migration_pages().
If a set of pages is allocated but fails to be added to the SG table,
they need to be freed to prevent a memory leak.
Any pages successfully added to the SG table will be freed as part of
mlx5vf_free_data_buffer(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: Initialize cfid->tcon before performing network ops
Avoid leaking a tcon ref when a lease break races with opening the
cached directory. Processing the leak break might take a reference to
the tcon in cached_dir_lease_break() and then fail to release the ref in
cached_dir_offload_close, since cfid->tcon is still NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
udmabuf: fix memory leak on last export_udmabuf() error path
In export_udmabuf(), if dma_buf_fd() fails because the FD table is full, a
dma_buf owning the udmabuf has already been created; but the error handling
in udmabuf_create() will tear down the udmabuf without doing anything about
the containing dma_buf.
This leaves a dma_buf in memory that contains a dangling pointer; though
that doesn't seem to lead to anything bad except a memory leak.
Fix it by moving the dma_buf_fd() call out of export_udmabuf() so that we
can give it different error handling.
Note that the shape of this code changed a lot in commit 5e72b2b41a21
("udmabuf: convert udmabuf driver to use folios"); but the memory leak
seems to have existed since the introduction of udmabuf. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on node blkaddr in truncate_node()
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2534!
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
Call Trace:
truncate_node+0x1ae/0x8c0 fs/f2fs/node.c:909
f2fs_remove_inode_page+0x5c2/0x870 fs/f2fs/node.c:1288
f2fs_evict_inode+0x879/0x15c0 fs/f2fs/inode.c:856
evict+0x4e8/0x9b0 fs/inode.c:723
f2fs_handle_failed_inode+0x271/0x2e0 fs/f2fs/inode.c:986
f2fs_create+0x357/0x530 fs/f2fs/namei.c:394
lookup_open fs/namei.c:3595 [inline]
open_last_lookups fs/namei.c:3694 [inline]
path_openat+0x1c03/0x3590 fs/namei.c:3930
do_filp_open+0x235/0x490 fs/namei.c:3960
do_sys_openat2+0x13e/0x1d0 fs/open.c:1415
do_sys_open fs/open.c:1430 [inline]
__do_sys_openat fs/open.c:1446 [inline]
__se_sys_openat fs/open.c:1441 [inline]
__x64_sys_openat+0x247/0x2a0 fs/open.c:1441
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
The root cause is: on a fuzzed image, blkaddr in nat entry may be
corrupted, then it will cause system panic when using it in
f2fs_invalidate_blocks(), to avoid this, let's add sanity check on
nat blkaddr in truncate_node(). |
