| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: pcf8563: fix clock provider leak on unbind
pcf8563_clkout_register_clk() registers the CLKOUT clock provider with
of_clk_add_provider(), but nothing ever unwinds it: there is no
of_clk_del_provider() call and the driver has no remove callback. Each
of_clk_add_provider() allocates a struct of_clk_provider, takes a
reference on the OF node and adds an entry to the global of_clk_providers
list, none of which is released when the device is unbound. Every
bind/unbind (or module reload) therefore leaks a provider structure and
an of_node reference.
The clock itself is already device-managed (devm_clk_register()); only
the provider registration was not. Use devm_of_clk_add_hw_provider() so
the provider is removed automatically on unbind. Tie it to the parent
i2c device, whose OF node carries the #clock-cells and clock-output-names
properties (the RTC class device has no OF node of its own). |
| c-ares is an asynchronous resolver library. Prior to 1.34.7, ares_dns_parse() trusts the attacker-controlled ANCOUNT, NSCOUNT, and ARCOUNT fields before confirming that the DNS response contains enough bytes for the claimed records. Because process_answer() invokes parsing before transaction ID and question validation, a malicious DNS response can cause ares_dns_record_rr_prealloc() and ares_array_set_size() to reserve disproportionate heap memory for a tiny message. Repeated responses create large allocation and release cycles that can degrade or deny name resolution, without causing memory corruption or information disclosure. This issue is fixed in version 1.34.7. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold CQ references when processing EQ events
EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or
error callbacks outside the xarray lock. erdma_destroy_cq() can erase the
CQ from the xarray and free its queue buffer and doorbell record while a
previously scheduled EQ handler is still using the CQ.
Add a CQ refcount and take a reference under the xarray lock with
refcount_inc_not_zero(). Remove the CQ from the xarray before dropping
the destroy-path reference, then wait for in-flight EQ users before
releasing CQ resources. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: free preauth sessions on connection teardown
SMB3.1.1 multichannel binding preserves the preauthentication hash in a
preauth_session between the NTLM negotiate and authenticate requests.
The binding NTLM negotiate allocates this object and returns
STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends
the authenticate request, neither the authenticate nor error cleanup paths
free the object.
Release any remaining preauthentication sessions when tearing down the
connection. Initialize the list when allocating the connection so that this
cleanup is safe regardless of the negotiated dialect. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: avoid teardown retry loop on xarray allocation failure
__ublk_shmem_remove_ranges() removes matching maple tree ranges in
batches, but first stores each range into a temporary xarray so that the
pages can be unpinned after dropping the maple tree lock.
That temporary xarray is filled under the maple tree lock with
xa_store(..., GFP_ATOMIC). If the store fails before mas_erase(), the
current range is left in the tree and the helper returns false. The
outer ublk_shmem_remove_ranges() loop then immediately retries the same
range. While the atomic allocation keeps failing, the teardown path has
no forward progress.
The issue can be reproduced with radix_tree_node failslab injection after
a SHMEM_ZC buffer has already been registered:
# Kernel config:
# CONFIG_BLK_DEV_UBLK=y
# CONFIG_DEBUG_FS=y
# CONFIG_FAULT_INJECTION=y
# CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAILSLAB=y
echo 10 > /proc/sys/vm/nr_hugepages
mkdir -p /tmp/htlb
mount -t hugetlbfs none /tmp/htlb
fallocate -l 4M /tmp/htlb/ublk_buf
dev_id=$(kublk add -t null --shmem_zc \
--htlb /tmp/htlb/ublk_buf |
awk -F '[ :]' '/dev id/ {print $3}')
echo 1 > /sys/kernel/slab/radix_tree_node/failslab
echo Y > /sys/kernel/debug/failslab/cache-filter
echo Y > /sys/kernel/debug/failslab/ignore-gfp-wait
echo 1 > /sys/kernel/debug/failslab/interval
echo -1 > /sys/kernel/debug/failslab/times
echo 100 > /sys/kernel/debug/failslab/probability
kublk del -n "$dev_id"
On the unfixed kernel the delete command was still running after 3
seconds. Disabling failslab made it return. The fault-injection stack
showed:
should_failslab
kmem_cache_alloc_lru_noprof
__xas_nomem
__xa_store
xa_store
__ublk_shmem_remove_ranges
ublk_cdev_rel
ublk_ctrl_del_dev
Remove the allocation from the teardown loop. Keep the existing batch
limit, but collect {base_pfn, nr_pages} pairs in a fixed-size stack array.
Once a matching range is found, the range is erased from the maple tree
before dropping the lock, so each successful scan makes progress without
depending on any GFP_ATOMIC allocation.
With the same failslab settings, the fixed kernel completed
"kublk del -n $dev_id" successfully in about 45 ms. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: free global tag_set on init error path
If shared_tags is enabled, null_setup_tagset() allocates the global tag_set
via null_init_global_tag_set(). If device creation later fails, err_dev
destroys the default devices and calls unregister_blkdev(), but never frees
the global tag_set. Since module init failed, null_exit() is never invoked,
so the global tag_set's tags and maps are permanently leaked.
Free the global tag_set in err_dev, matching null_exit() which does
if (tag_set.ops) blk_mq_free_tag_set(&tag_set). |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: call ksmbd_proc_cleanup() on module init failure
When a later initializer fails, the unwind chain releases resources
created after procfs and then jumps directly to class_unregister().
Returning an error from module_init() leaves the proc tree and its
per-CPU counters allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark tracing_multi trampolines as ftrace managed
Since tracing_multi link does not set ftrace_managed, it would fail to
release the tracing_multi link when attaching tracing_multi link and
then attaching fentry link.
[ 3.714215] WARNING: kernel/bpf/trampoline.c:1727 at bpf_trampoline_multi_detach+0x20b/0x240, CPU#1: test_progs/97
...
[ 3.733170] bpf_tracing_multi_link_release+0x14/0x30
[ 3.733890] bpf_link_free+0x58/0x130
[ 3.734414] bpf_link_release+0x23/0x30
Fix it by setting 'ftrace_managed = true' in register_fentry_multi(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: xilinx: formatter_pcm: fix stream_data leak on open error
In xlnx_formatter_pcm_open(), stream_data is allocated and
adata->play_stream or adata->capture_stream is assigned early. If a
later step, such as snd_pcm_hw_constraint_step() or
snd_pcm_hw_constraint_integer(), fails, the function returns the error
immediately. ALSA does not call the close callback when open fails, so
stream_data is leaked and the stream pointer is left dangling, pointing
to a substream that ALSA frees. A later interrupt would then call
snd_pcm_period_elapsed() on the freed substream.
Free stream_data and clear the stream pointer on the error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: Fix rollback for explicit UBI device numbers
ubi_init_attach() rolls back module initialization failures by scanning
ubi_devices[0..i-1], where i is the mtd= parameter index. That assumes
the parameter index matches the UBI device number.
That assumption is not true when mtd= specifies an explicit ubi_num. A
successfully attached device can be stored at a higher ubi_devices[]
slot, and a later failure can miss it during rollback.
Scan the full ubi_devices[] array and detach by the actual array index,
matching the way UBI devices are stored. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: sunplus: fix error handling in sp_uphy_init()
Fix the error paths of sp_uphy_init() to undo exactly what each stage
did: return directly if clk_prepare_enable() fails, release only the clock
if reset_control_deassert() fails, and jump to err_reset if
update_disc_vol() fails so the clock and reset are not leaked. |
| Crawl4AI before 0.9.3 contains an uncontrolled resource consumption vulnerability in PDFContentScrapingStrategy that allows untrusted clients to cause denial of service. Attackers can select the PDF scraping strategy in POST requests to download large remote PDFs without size or page limits, exhausting disk, CPU, and bandwidth on shared workers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: tcon: Drop TCON TOP device reference
of_find_device_by_node() takes a device reference. Drop it after mux
configuration succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: pci: fix error path in rtl_pci_probe()
In the last error path in rtl_pci_probe(), the cleanup functions are
skipped due to a wrong goto label. Moreover, the successful call to
rtl_init_rfkill(), ieee80211_register_hw(), rtl_debug_add_one() have to
be reverted. Fix this issue by updating the labels and adding the
relevant cleanup functions to the last error path. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/fsdev: use __va(phys) for kaddr in direct_access
Use __va(phys) instead of virt_addr + linear_offset for the kaddr
return in __fsdev_dax_direct_access(). The previous code added a
device-linear byte offset to virt_addr (which is __va of ranges[0]),
but for multi-range devices with physical gaps between ranges, this
linear arithmetic crosses the gap and produces a wrong kernel virtual
address. Using __va(phys) where phys comes from dax_pgoff_to_phys()
is correct for any range layout because the direct map translates
each physical address independently.
This leaves dev_dax->virt_addr write-only, so remove the field
(suggested by Dave Jiang). |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.12, SHCParser in org.hl7.fhir.r5/src/main/java/org/hl7/fhir/r5/elementmodel/SHCParser.java can consume attacker-controlled Smart Health Card JWT content whose header contains zip: "DEF" and whose small raw-DEFLATE payload expands to a very large value. SHCParser.decodeJWT() passes the decoded payload to SHCParser.inflate(), which accumulates all decompressed bytes in a ByteArrayOutputStream without an output-size limit before JSON parsing, and SHCParser.decompress() contains the same unbounded pattern. An application or validator service that accepts attacker-supplied SHC content can therefore suffer excessive heap allocation, severe garbage-collection pressure, request failure, process instability, or process termination. This issue is fixed in version 6.9.12. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.12, SHCParser in org.hl7.fhir.r5/src/main/java/org/hl7/fhir/r5/elementmodel/SHCParser.java can enter an infinite loop while processing attacker-controlled Smart Health Card JWT content whose header contains zip: "DEF" and whose raw-DEFLATE payload is empty or truncated. SHCParser.decodeJWT() reaches SHCParser.inflate(), where Inflater.inflate() can return zero while Inflater.finished() remains false and Inflater.needsInput() is true. The loop also lacks an Inflater.needsDictionary() termination check, SHCParser.decompress() contains the same zero-progress pattern, and ResourceChecker.java can reach SHC parsing during file-format detection. A malformed validation request can pin a JVM worker thread indefinitely, and concurrent requests can exhaust all validation workers. This issue is fixed in version 6.9.12. |
| A vulnerability in the EIGRP implementation in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper resource management when handling EIGRP update messages. An attacker could exploit this vulnerability by sending crafted EIGRP updates at a high rate to an affected device. A successful exploit could allow the attacker to trigger a memory leak that will eventually cause the affected device to reload unexpectedly. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix resource leak on module load failure
We need to properly clean up the SMBIOS request and the privacy driver
when the module load fails. |
| Autobahn Python is a WebSocket and WAMP implementation for Python that supports Twisted and asyncio. Prior to 26.7.1, WebSocket endpoints that accept permessage-deflate and rely on maxMessagePayloadSize enforce that limit against the compressed frame length before inflation but do not recheck the decompressed message size before delivery. A remote unauthenticated client can send a valid compressed frame below the configured wire-size limit that expands beyond the application message limit, causing oversized data to be allocated, joined, validated, and passed to application callbacks. This can create resource-exhaustion pressure, but the advisory does not establish confidentiality or integrity impact. This issue is fixed in version 26.7.1. |
