| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been found in HdrHistogram up to 2.2.2. This vulnerability affects the function recordValueWithCount of the file src/main/java/org/HdrHistogram/AbstractHistogram.java of the component AbstractHistogram. Such manipulation of the argument Count leads to state issue. The attack can only be performed from a local environment. The exploit has been disclosed to the public and may be used. The existence of this vulnerability is still disputed at present. This issue is disputed due to the potential lack of crossing of security boundaries and the pre-requisites for a successful attack. |
| WinRAR 5.61 contains a denial of service vulnerability that allows local attackers to crash the application by placing a malformed winrar.lng language file in the installation directory. Attackers can trigger the crash by opening an archive and pressing the test button, causing an access violation at memory address 004F1DB8 when the application attempts to read invalid data. |
| osquery is a SQL powered operating system instrumentation, monitoring, and analytics framework. Prior to 5.23.1, an unprivileged attacker can read the contents of an osquery file carve until the carve completes and the temporary files are deleted because in-progress carve directories are not created with private permissions. If the carve targets a directory that the attacker controls, arbitrary file reads are possible, such as sensitive local files. This issue is fixed in version 5.23.1. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: Fix potential unregister of netdev that has not been registered yet
If an error occurs during register_netdev() for the first MAC in
cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL,
cpsw->slaves[1].ndev would remain unchanged. This could later cause
cpsw_unregister_ports() to attempt unregistering the second MAC.
To address this, add a check for ndev->reg_state before calling
unregister_netdev(). With this change, setting cpsw->slaves[i].ndev
to NULL becomes unnecessary and can be removed accordingly. |
| Claude Code is an agentic coding tool. From 2.1.59 until 2.1.128, the Claude Code /copy command wrote responses to a hardcoded, predictable path (/tmp/claude/response.md) without UID isolation, randomness, or symlink protection. The file was created world-readable (0644) in a world-traversable directory (0755), allowing any local user to read a privileged user's Claude response, which could contain secrets or credentials. Additionally, because the path was static and predictable, a local attacker could pre-create the directory and plant a symlink at the expected file path, causing the privileged process to follow the symlink and overwrite an attacker-chosen file with the response text. Exploiting this required a local unprivileged user on the same system and a privileged user to run the /copy command. This vulnerability is fixed in 2.1.128. |
| GNU gzip contains a vulnerability in the gzexe utility related to insecure temporary file handling. When the mktemp utility is not available in the user’s PATH, gzexe falls back to constructing a temporary file path based solely on the process ID (PID). This predictable filename is created without exclusive access or existence checks.
A local attacker can pre‑create the predicted temporary file path as a symbolic link pointing to an arbitrary file writable by the victim. When gzexe runs, it follows the symlink and overwrites the target file, resulting in a time‑of‑check to time‑of‑use (TOCTOU) condition that allows arbitrary file overwrite.
This issue has been fixed in the commit 4e6f8b24ab823146ab8776f0b7fe486ab34d4269 |
| A potential security vulnerability has been identified in the HP Accessory WMI Provider installer for some HP Docking Stations, which might allow escalation of privilege and/or arbitrary code execution. HP is releasing software updates to mitigate the potential vulnerability. |
| Pi is a minimal terminal coding harness. From 0.74.0 until 0.78.1, Pi versions with temporary npm or git extension package installs used predictable paths under the operating system temporary directory. On Linux-based multi-user systems, a local attacker who can write to the shared temporary directory could prepare the expected package location before another user runs pi with a temporary extension package source. Pi could then load attacker-controlled extension code in the victim user's process. This vulnerability is fixed in 0.78.1. |
| bit7z is a cross-platform C++ static library that allows the compression/extraction of archive files. Prior to version 4.0.12, there is an arbitrary file overwrite vulnerability via symlink attack on predictable temp files during archive update. This issue has been patched in version 4.0.12. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: microchip-core-qspi: don't attempt to transmit during emulated read-only dual/quad operations
The core will deal with reads by creating clock cycles itself, there's
no need to generate clock cycles by transmitting garbage data at the
driver level. Further, transmitting garbage data just bricks the transfer
since QSPI doesn't have a dedicated master-out line like MOSI in regular
SPI. I'm not entirely sure if the transfer is bricked because of the
garbage data being transmitted on the bus or because the core loses
track of whether it is supposed to be sending or receiving data. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: reject new tp_meter sessions during teardown
Prevent tp_meter from starting new sender or receiver sessions after
mesh_state has left BATADV_MESH_ACTIVE. |
| CodexBar prior to 0.32.0 contains a privilege escalation vulnerability in the CLI installer that allows local attackers to execute arbitrary commands as root by exploiting a race condition in temporary file handling. The installer creates a temporary file with mktemp, writes a privileged shell payload into it, and executes it with administrator privileges via bash, allowing a same-user local process to rewrite the installer body before the administrator prompt is approved, causing attacker-controlled commands to run as root. |
| CodexBar prior to 0.32.0 contains an insecure temporary file handling vulnerability that allows local attackers to access sensitive credentials or tamper with build artifacts by exploiting predictable file paths in the release notarization workflow. Attackers with access to the same host can read the App Store Connect API key written to a fixed path, pre-create files or symbolic links at predictable locations to redirect writes to attacker-controlled destinations, or tamper with notarization archives before submission. |
| In mlflow/mlflow versions prior to 3.11.0, the `get_or_create_nfs_tmp_dir()` function in `mlflow/utils/file_utils.py` creates temporary directories with world-writable permissions (0o777), and the `_create_model_downloading_tmp_dir()` function in `mlflow/pyfunc/__init__.py` creates directories with group-writable permissions (0o770). These insecure permissions allow local attackers to tamper with model artifacts, such as cloudpickle-serialized Python objects, and achieve arbitrary code execution when the tampered artifacts are deserialized via `cloudpickle.load()`. This vulnerability is particularly critical in environments with shared NFS mounts, such as Databricks, where NFS is enabled by default. The issue is a continuation of the vulnerability class addressed in CVE-2025-10279, which was only partially fixed. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:si: Return state to normal if message allocation fails
There were places where nothing would get started if a message
allocation failed, so the driver needs to return to normal state. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: /smack/doi: accept previously used values
Writing to /smack/doi a value that has ever been
written there in the past disables networking for
non-ambient labels.
E.g.
# cat /smack/doi
3
# netlabelctl -p cipso list
Configured CIPSO mappings (1)
DOI value : 3
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (3)
domain: "_" (IPv4)
protocol: UNLABELED
domain: DEFAULT (IPv4)
protocol: CIPSO, DOI = 3
domain: DEFAULT (IPv6)
protocol: UNLABELED
# cat /smack/ambient
_
# cat /proc/$$/attr/smack/current
_
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms
# echo foo >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms
unknown option 86
# echo 4 >/smack/doi
# echo 3 >/smack/doi
!> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17
# echo 3 >/smack/doi
!> [ 249.402261] smk_cipso_doi:678 remove rc = -2
!> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17
# ping -c1 10.1.95.12
!!> ping: 10.1.95.12: Address family for hostname not supported
# echo _ >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms
This happens because Smack keeps decommissioned DOIs,
fails to re-add them, and consequently refuses to add
the “default” domain map:
# netlabelctl -p cipso list
Configured CIPSO mappings (2)
DOI value : 3
mapping type : PASS_THROUGH
DOI value : 4
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (2)
domain: "_" (IPv4)
protocol: UNLABELED
!> (no ipv4 map for default domain here)
domain: DEFAULT (IPv6)
protocol: UNLABELED
Fix by clearing decommissioned DOI definitions and
serializing concurrent DOI updates with a new lock.
Also:
- allow /smack/doi to live unconfigured, since
adding a map (netlbl_cfg_cipsov4_map_add) may fail.
CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI
- add new DOI before removing the old default map,
so the old map remains if the add fails
(2008-02-04, Casey Schaufler) |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't cache extent during splitting extent
Caching extents during the splitting process is risky, as it may result
in stale extents remaining in the status tree. Moreover, in most cases,
the corresponding extent block entries are likely already cached before
the split happens, making caching here not particularly useful.
Assume we have an unwritten extent, and then DIO writes the first half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, when ext4_split_extent_at() splits this extent, it truncates the
existing extent and then inserts a new one. During this process, this
extent status entry may be shrunk, and calls to ext4_find_extent() and
ext4_cache_extents() may occur, which could potentially insert the
truncated range as a hole into the extent status tree. After the split
is completed, this hole is not replaced with the correct status.
[UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUU|HHHHHHHH] extent status tree H: hole
Then, the outer calling functions will not correct this remaining hole
extent either. Finally, if we perform a delayed buffer write on this
latter part, it will re-insert the delayed extent and cause an error in
space accounting.
In adition, if the unwritten extent cache is not shrunk during the
splitting, ext4_cache_extents() also conflicts with existing extents
when caching extents. In the future, we will add checks when caching
extents, which will trigger a warning. Therefore, Do not cache extents
that are being split. |
| OpenTelemetry.Exporter.OpenTelemetryProtocol is the OTLP (OpenTelemetry Protocol) exporter implementation. From 1.8.0 to 1.15.2, the OTLP disk retry feature in OpenTelemetry.Exporter.OpenTelemetryProtocol silently fell back to Path.GetTempPath() when OTEL_DOTNET_EXPERIMENTAL_OTLP_RETRY=disk was set but OTEL_DOTNET_EXPERIMENTAL_OTLP_DISK_RETRY_DIRECTORY_PATH was not configured. The exporter stored and loaded *.blob files under fixed, signal-named subdirectories (traces, metrics, logs) beneath that shared temporary root path. On multi-user systems where the temporary directory is accessible to other local accounts, this allows an attacker to write crafted *.blob files, read *.blob files written by the application between export failures, or deposit numerous or oversized blob files, degrading retry-loop performance or consuming disk space. This vulnerability is fixed in 1.15.3. |
| OpenClaw before 2026.3.31 contains a trust-decline vulnerability that preserves attacker-discovered endpoints in remote onboarding flows. Attackers can route gateway credentials to malicious endpoints by having their discovered URL survive the trust decline process into manual prompts requiring operator acceptance. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/apic: Disable x2apic on resume if the kernel expects so
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the
pre-sleep configuration or initial boot configuration for each CPU, including
MSR state:
When executing from the power-on reset vector as a result of waking from an
S2 or S3 sleep state, the platform firmware performs only the hardware
initialization required to restore the system to either the state the
platform was in prior to the initial operating system boot, or to the
pre-sleep configuration state. In multiprocessor systems, non-boot
processors should be placed in the same state as prior to the initial
operating system boot.
(further ahead)
If this is an S2 or S3 wake, then the platform runtime firmware restores
minimum context of the system before jumping to the waking vector. This
includes:
CPU configuration. Platform runtime firmware restores the pre-sleep
configuration or initial boot configuration of each CPU (MSR, MTRR,
firmware update, SMBase, and so on). Interrupts must be disabled (for
IA-32 processors, disabled by CLI instruction).
(and other things)
So at least as per the spec, re-enablement of x2apic by the firmware is
allowed if "x2apic on" is a part of the initial boot configuration.
[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization
[ bp: Massage. ] |
