| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (w83791d) remove fan/pwm 4-5 sysfs group on remove
When the fan/pwm 4-5 pins are not used as GPIO, w83791d_probe()
creates the w83791d_group_fanpwm45 sysfs group on the I2C client
device.
The probe error path removes this group when a later initialization
step fails, but the normal remove path only removes w83791d_group.
As a result, the optional fan/pwm 4-5 sysfs files can remain after the
driver is unbound.
The callbacks associated with these files access the driver data,
which is devm allocated and released after driver unbind. Leaving the
sysfs files behind can therefore result in accesses to stale driver
data.
Remove w83791d_group_fanpwm45 during normal teardown as well.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: validate access flags before swapping the MR's PD
rxe_rereg_user_mr() reassigns mr->ibmr.pd first and only then
validates the IB_MR_REREG_ACCESS argument:
if (flags & IB_MR_REREG_PD) {
rxe_put(old_pd);
rxe_get(pd);
mr->ibmr.pd = ibpd;
}
if (flags & IB_MR_REREG_ACCESS) {
if (access & ~RXE_ACCESS_SUPPORTED_MR)
return ERR_PTR(-EOPNOTSUPP);
mr->access = access;
}
Both flags pass the entry check because RXE_MR_REREG_SUPPORTED is
IB_MR_REREG_PD | IB_MR_REREG_ACCESS, so a caller can reach the access
check with mr->ibmr.pd already reassigned.
mr->ibmr.pd is owned by the core, which adjusts pd->usecnt only on the
success path: ib_uverbs_rereg_mr() jumps to put_new_uobj on a driver error
without undoing the reassignment, so mr->pd == new_pd while the usecnts
still charge the MR to orig_pd. ib_dereg_mr_user() then decrements
new_pd, whose count can reach zero while a memory window still references
it; uverbs_free_pd() frees the PD on that count alone and rxe_mw_cleanup()
writes to freed memory:
BUG: KASAN: slab-use-after-free in __rxe_put+0x31/0xa0
Write of size 4 at addr ffff8881301dd690 by task rxe_poc/591
__rxe_put+0x31/0xa0
rxe_mw_cleanup+0x42/0x200
__rxe_cleanup+0x115/0x370
rxe_dealloc_mw+0x4c/0x80
Allocated by task 591:
ib_uverbs_alloc_pd+0x258/0x540
Freed by task 591:
ib_dealloc_pd_user+0x174/0x210
uverbs_free_pd+0x8d/0xc0
ib_uverbs_dealloc_pd+0x18e/0x1d0
Validate the access flags before mutating any state so the callback either
applies every requested change or none. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: cancel reconnect work in clean_demultiplex_info()
clean_demultiplex_info() cancels server->echo delayed work but not
server->reconnect, which can cause a use-after-free when the
demultiplex thread exits while a reconnect work is still queued:
cifs_demultiplex_thread()
cifs_readv_from_socket()
cifs_reconnect()
__cifs_reconnect()
cifs_queue_server_reconn()
mod_delayed_work(cifsiod_wq, &server->reconnect, 0)
clean_demultiplex_info()
cancel_delayed_work_sync(&server->echo) // echo canceled
// reconnect NOT canceled
kfree_sensitive(server) // server freed
...later, on cifsiod_wq:
smb2_reconnect_server()
server->srv_count // UAF read of freed server
Fix this by canceling server->reconnect delayed work in
clean_demultiplex_info() before the server is freed, the same way
cifs_put_tcp_session() already does. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: hold net_device reference under RCU in bundle creation
xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into
a local pointer without taking a device reference, then pass it to
xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via
dst_dev_put() and frees the old net_device, causing a use-after-free
when xfrm6_fill_dst() later dereferences the stale dev pointer.
BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860
(net/ipv6/xfrm6_policy.c:86 netdev_hold())
Read of size 8 at addr ffff8880142fe588 by task exploit/153
Call Trace:
xfrm6_fill_dst+0x82c/0x860
xfrm_resolve_and_create_bundle+0x21d4/0x2bd0
xfrm_lookup_with_ifid+0x485/0x1640
ip6_dst_lookup_flow+0x19b/0x1e0
udpv6_sendmsg+0x1443/0x2dd0
Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU
read-side critical section active until xfrm_fill_dst() has taken the
required device references. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix UAF in lbtf_free_adapter()
lbtf_free_adapter() calls lbtf_free_cmd_buffer() to free the command
buffers before calling timer_delete_sync() to wait for the command
timer callback. If the timer callback (command_timer_fn) is already
running when lbtf_free_cmd_buffer() frees the command array, the
callback dereferences priv->cur_cmd->cmdbuf which points to freed
memory.
Swap the order so that timer_delete_sync() runs first, ensuring any
in-flight callback has completed before the command buffers are freed. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (hp-wmi-sensors) Fix use-after-free in fungible_show()
nsensor->current_state is dynamically replaced as the sensor's state
changes. update_numeric_sensor_from_wobj() does this by freeing the
old string and installing a new one:
if (strcmp(trimmed, nsensor->current_state)) {
new_string = hp_wmi_strdup(dev, trimmed);
if (new_string) {
devm_kfree(dev, nsensor->current_state);
nsensor->current_state = new_string;
}
}
This function is only ever called from hp_wmi_update_info() while
state->lock is held, so the free-and-replace itself is properly
serialized against concurrent updates.
fungible_show(), however, reads the same pointer after the lock has
already been dropped:
err = hp_wmi_update_info(state, info);
if (err)
return err;
switch (prop) {
...
case HP_WMI_PROPERTY_CURRENT_STATE:
seq_printf(seqf, "%s\n", nsensor->current_state);
break;
hp_wmi_update_info() takes state->lock internally and releases it
before returning, so by the time fungible_show() dereferences
nsensor->current_state in seq_printf(), no lock is held. Two
processes reading a sensor's current_state debugfs entry at
overlapping times (or one reading it while another read of the same
sensor triggers a refresh) can race: one thread's seq_printf() can
be part-way through printing the string at the moment another
thread's call into update_numeric_sensor_from_wobj() frees it with
devm_kfree() and installs a new pointer, causing a use-after-free
read.
Take state->lock around the read in fungible_show() as well, so it
can never run concurrently with the free-and-replace in
update_numeric_sensor_from_wobj(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept
We need to clear cep before release state_lock as siw_qp_llp_close and
siw_qp_modify->siw_qp_llp_close did.
Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock
is released before the error path cleanup. A concurrent ibv_modify_qp()
transitioning the QP to ERROR can race in this window:
siw_accept() ibv_modify_qp(ERROR)
---------------------- ----------------------
siw_qp_modify() fails
up_write(&qp->state_lock)
down_write(&qp->state_lock)
nextstate_from_idle():
if (qp->cep)
siw_cep_put(qp->cep) <- frees cep
qp->cep = NULL
goto error
cep->qp = NULL <- UAF
Clear qp->cep and drop the association reference taken by siw_cep_get(),
all under the write lock held from the initial down_write(&qp->state_lock).
Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free
the cep before siw_accept() is done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: RCU-free the scheduler-containing ring and VM objects
Both struct msm_ringbuffer and struct msm_gem_vm embed a struct
drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback
msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then
free the containing object with plain kfree().
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace (the submit out-fence, or
a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded
scheduler after the ring/VM is freed, so a later get_timeline_name() --
reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab
memory (KASAN slab-use-after-free read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
objects with kfree_rcu() instead of kfree().
Patchwork: https://patchwork.freedesktop.org/patch/750234/ |
| Gradle is a build tool with a focus on build automation and support for multi-language development. When Gradle writes a dependency into its dependency cache, it uses the dependency's coordinates to compute a file location. With specially crafted dependency coordinates, Gradle can be made to write files into an unintended location. The file may be written outside the dependency cache or over another file in the dependency cache. This vulnerability could be used to poison the dependency cache or overwrite important files elsewhere on the filesystem where the Gradle process has write permissions. Exploiting this vulnerability requires an attacker to have control over a dependency repository used by the Gradle build or have the ability to modify the build's configuration. It is unlikely that this would go unnoticed. A fix has been released in Gradle 7.6.2 and 8.2 to protect against this vulnerability. Gradle will refuse to cache dependencies that have path traversal elements in their dependency coordinates. It is recommended that users upgrade to a patched version. If you are unable to upgrade to Gradle 7.6.2 or 8.2, `dependency verification` will make this vulnerability more difficult to exploit. |
| Node.js: All versions prior to Node.js 6.15.0: Debugger port 5858 listens on any interface by default: When the debugger is enabled with `node --debug` or `node debug`, it listens to port 5858 on all interfaces by default. This may allow remote computers to attach to the debug port and evaluate arbitrary JavaScript. The default interface is now localhost. It has always been possible to start the debugger on a specific interface, such as `node --debug=localhost`. The debugger was removed in Node.js 8 and replaced with the inspector, so no versions from 8 and later are vulnerable. |
| Spring Framework, versions 5.0.x prior to 5.0.7 and 4.3.x prior to 4.3.18 and older unsupported versions, allows web applications to enable cross-domain requests via JSONP (JSON with Padding) through AbstractJsonpResponseBodyAdvice for REST controllers and MappingJackson2JsonView for browser requests. Both are not enabled by default in Spring Framework nor Spring Boot, however, when MappingJackson2JsonView is configured in an application, JSONP support is automatically ready to use through the "jsonp" and "callback" JSONP parameters, enabling cross-domain requests. |
| Unbound before 1.9.4 accesses uninitialized memory, which allows remote attackers to trigger a crash via a crafted NOTIFY query. The source IP address of the query must match an access-control rule. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. From 42.3.3 until 42.10.0, 43.5.0, and 44.0.0-beta.6, Electron's sandboxed preload code cache did not verify that a cached entry matched the preload it was served for. A compromised renderer could write attacker-controlled cache data and cause Electron to reuse it for a later load, executing the renderer's code in the more privileged preload context. The issue affects applications that load untrusted content. This issue is fixed in versions 42.10.0, 43.5.0, and 44.0.0-beta.6. |
| Local privilege escalation in Checkmk 2.5.0 before 2.5.0p10 allows a user with access to edit the Oracle Instant Client referenced by the agent plugin 'mk-oracle' to escalate their privileges if an agent has this plugin enabled. |
| Foxit PDF Editor/Reader's FileOpen plugin did not adequately validate certain encryption metadata in specially crafted PDF files. This could leave an internal pointer in an invalid state, resulting in chained read and write access violations and potentially enabling arbitrary code execution. |
| IBM Financial Transaction Manager (FTM) for RedHat OpenShift could allow a local attacker to execute arbitrary commands due to the inclusion of functionality from an untrusted control sphere. |
| A flaw was found in SSSD. A local user can cause a denial of service (DoS) by disrupting system authentication services. When handling Generic Security Services Application Programming Interface (GSSAPI) authentication in the Pluggable Authentication Module (PAM) responder, cached connection state is freed upon completion without clearing the reference pointer. An attacker can exploit this by sending an additional request over the same connection, causing the service to access invalid memory and unexpectedly terminate. |
| Issue summary: The first concurrent use of the same X.509 certificate by
several threads may cause its cached extension data to be freed while
another thread is still using it.
Impact summary: A remote, unauthenticated peer could crash a multi-threaded
TLS client, or a multi-threaded TLS server that requests client
certificates, if the first certificate chains built to the same trusted CA
certificate are built by several connections at the same time. This is a
use-after-free read, which is likely to crash the process, resulting in a
Denial of Service.
CWE: CWE-416: Use After Free
Description: OpenSSL caches the decoded values of a certificate's X.509v3
extensions inside the X509 object the first time they are needed. In
OpenSSL 4.0 this cache is built in two phases: the extension values are
computed while holding a read lock on the certificate, and the results are
then installed into the certificate under a write lock. Because a read lock
does not exclude other readers, several threads can compute the cache for
the same certificate at the same time. Each thread that subsequently
acquires the write lock installs its own results and frees the values
installed by the thread before it, even though that earlier thread has
already marked the cache as complete and may have returned pointers into it
to its caller. A caller still using those pointers then reads freed memory.
Any certificate shared between threads is exposed the first time its
extensions are decoded. In TLS the certificates at risk are the trusted CA
certificates supplied for chain verification, by whatever means, since these
are shared by every connection and their extensions are decoded and cached
the first time a chain is built to them. Certificates sent by the peer are
decoded separately for each connection and are not shared, so they are not
affected. In a TLS client verifying server certificates, or a TLS server
that requests and verifies client certificates, the use-after-free could
only occur if the first chains built to the same trusted CA are built by
several connections at the same time.
FIPS impact: no
The FIPS module is not affected as X.509 certificate handling is outside
of the OpenSSL FIPS module boundary.
OpenSSL 4.0 is vulnerable to this issue.
OpenSSL 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are not affected by this issue.
OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3.
This issue was reported on 27 August 2026 by Tim Becker (Xint.io) and
independently in a public report on 31 August 2026 by aydinmercan.
The fix has been developed by Bob Beck.
-- cut (non-publishing metadata for internal use) --
Reported by: Tim Becker (Xint.io), aydinmercan
Fixed by: Bob Beck |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.27.0 until 2.131.0, Docling plugin factories in docling/models/factories/base_factory.py call load_setuptools_entrypoints() before applying the allow_external_plugins setting, so every module registered in the Docling entry-point group is imported even when external plugins are disabled. An installed third-party or compromised package can therefore execute import-time code when Docling starts, while the subsequent namespace filter misleadingly reports that the plugin was not loaded. This issue is fixed in 2.131.0. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds
rxe_get_mcg() publishes a newly allocated multicast group in
rxe->mcg_tree before programming the backing Ethernet multicast address
with rxe_mcast_add(), which runs outside mcg_lock. A local userspace
RDMA client reaches this path with ATTACH_MCAST on a UD QP; if
rxe_mcast_add() then returns an error (for example -ENODEV when the
backing netdev has been removed, or a propagated dev_mc_add() error),
the unwind frees the published group without removing it from the tree.
A later lookup of the same MGID dereferences the freed struct rxe_mcg
from __rxe_lookup_mcg().
Fix this by keeping the new mcg private until rxe_mcast_add() succeeds.
Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add()
before taking the tree reference, and free the still-private mcg on
failure. Because the group is never visible in mcg_tree until the
multicast address is programmed, no concurrent caller can look it up or
attach a QP to a group that is about to be torn down, so the error path
needs no conditional unwind. If another caller publishes the same MGID
while the address is being programmed, the post-add re-check under
mcg_lock finds the winner; this caller then drops its private object and
balances its own rxe_mcast_add() with rxe_mcast_del() before returning
the winner.
Reproduced by forcing the rxe_mcast_add() error return under KASAN:
without the change the next attach to the same MGID reports a
slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure
returns cleanly. A no-injection attach/detach regression, including a
two-QP shared join/leave and re-attach, stays KASAN- and leak-clean. |
