| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject untrusted allocated-object pointers
When the final RCU read-side critical section ends, a local kptr is demoted
to PTR_UNTRUSTED but retains MEM_ALLOC. The pointer may be NULL or may refer
to an object whose lifetime is no longer protected.
type_is_ptr_alloc_obj() nevertheless recognizes any PTR_TO_BTF_ID with
MEM_ALLOC as a live allocated object. In particular, a refcount-only local
kptr never carries NON_OWN_REF, so it still passes the
bpf_refcount_acquire() argument check after RCU protection ends. The kfunc
can then dereference NULL or stale memory.
Make type_is_ptr_alloc_obj() reject PTR_UNTRUSTED pointers. Since
type_is_non_owning_ref() is based on the same predicate, graph kfunc
arguments obey the same live-object requirement. Fault-protected reads of
the demoted pointer remain valid: writes are already rejected, and read
fixups use bpf_may_fault_on_deref() rather than this predicate.
[ kkd: Rewrote commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Clear stale peer app data after address list changes
afs_fs_probe_fileserver() fetches the current endpoint state under
server->fs_lock, but leaves old_alist as NULL. Consequently,
afs_set_peer_appdata() treats every address list replacement as initial
setup and only binds the new peers; it never unbinds peers removed from
the old list.
An address refresh can therefore proceed as follows. CPU 0 replaces
server S's list and drops Pold without clearing Pold->app_data. The
server destroyer then clears only S's current peers and lets S reach its
RCU callback. After the callback frees S, CPU 1 handles a callback
through an RxRPC connection that still pins Pold, reads Pold->app_data,
and calls afs_use_server() on the freed object.
KASAN reported:
BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0
Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74
Call Trace:
afs_find_server+0x3c/0xa0
afs_rx_new_call+0x15c/0x390
rxrpc_new_incoming_call+0x97c/0x1730
rxrpc_input_packet.constprop.0+0xd03/0xec0
rxrpc_io_thread+0x967/0x1640
Allocated by task 93:
afs_lookup_server+0x1a7/0x14c0
afs_alloc_server_list+0x43f/0xb60
afs_create_volume+0x923/0x1490
afs_get_tree+0x1c6/0x10a0
Freed by task 0:
kfree+0x131/0x3c0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__call_rcu_common.constprop.0+0x71/0xa10
afs_put_server+0x213/0x2b0
Preserve old->addresses for the peer app-data update so that removed
peers are cleared before the endpoint state is replaced. Also advance
both cursors when the old and new lists share a peer; activating the
old/new comparison without this would otherwise loop forever on the
shared entry. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.1.16.0, a crafted ZIP-compressed TIFF processed with TIFF multithreading enabled can make TIFFInput::read_native_scanlines() return through an error path while asynchronous strip-decompression work remains queued. Because task_set is declared before ok and compressed_scratch, those captured objects are destroyed before the task-set destructor waits, allowing worker tasks to use stale stack and heap storage, resulting in a use-after-scope crash and denial of service. The affected implementation is identified by src/tiff.imageio/tiffinput.cpp, TIFFInput::read_native_scanlines(), task_set, ok, compressed_scratch, and uncompress_one_strip(), which define the relevant source path, functions, state, and trigger. This issue is fixed in 3.1.16.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: pin mqd and fw object bo to avoid eviction
mqd and fw objects are queue core objects which should remain
valid and never be unmapped and evicted for user queues to work
properly.
During eviction if these buffers are evicted the hw continue to
use the invalid addresses and caused page faults and system hung. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject resilient lock operations in rbtree callbacks
__bpf_rbtree_add() keeps parent and link pointers live across calls to the
program-supplied comparison callback. The verifier therefore requires the
root's lock to remain held throughout the callback.
The helper path enforces this rule for bpf_spin_lock() and
bpf_spin_unlock(), but the resilient lock kfunc argument path does not.
Since resilient locks may protect BPF rbtree roots, a callback can release
the root lock and let another CPU remove and free the node referenced by
the in-progress tree walk. The walk then resumes using freed pointers.
Reject resilient lock kfuncs in an rbtree comparison callback, matching
the existing policy for the spin lock helpers. Resilient-lock-protected
trees remain valid when their comparison callbacks leave lock state alone. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Don't dereference trace_event_file in deferred trigger free
The enable_event trigger defers trace_event_put_ref() to the
trigger free kthread, but the trace_event_file can already be freed
when the instance is removed.
Keep the trace_event_call directly in enable_trigger_data so the
deferred free does not access the freed trace_event_file. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5-ppl: fix use-after-free in ppl_do_flush()
The loop in ppl_do_flush() continues iterating after calling
ppl_io_unit_finished(), touching io->pending_flushes and leading to a
use-after-free.
Add a break statement to stop the loop once io is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown
The TX cleanup tasklet can be scheduled by the watchdog IRQ handler
to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in
the queue which might run after the cvm_oct_remove() frees net_device
structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it
iterates cvm_oct_device[] which is an array of netdevice pointers.
Add tasklet_kill() after free_irq() to ensure the tasklet is no longer
scheduled or running before teardown proceeds. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Validate udata before executing commands
The destroy callbacks currently zero the udata output after tearing down
driver resources. If the userspace access fails, uverbs preserves the
uobject and allows the destroy callback to run again, even though the
driver resource has already been freed.
Call ib_no_udata_io() before teardown so udata failures are detected
while the resource is still intact, then return success after teardown
completes.
As part of this change, move ib_respond_empty_udata() to the start of
the create and modify flows. While this is not strictly required for
general create flows, as the core layer unwinds uobjects on failure, it
is necessary for create AH. In _rdma_create_ah(), the HW object is
otherwise leaked. |
| Use after free in Workers in Google Chrome prior to 153.0.8010.47 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/renesas-irqc: Fix generic interrupt chip leak on remove
The driver allocates domain generic chips probe. However, on driver
removal, the generic chips are not automatically freed when the interrupt
domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on the
global list and may later be accessed by generic interrupt chip suspend,
resume, or shutdown callbacks after the driver has been removed,
potentially resulting in a use-after-free and kernel crash.
Fix the resource leak by setting IRQ_DOMAIN_FLAG_DESTROY_GC on the
interrupt domain; this lets the interrupt domain core automatically
release all generic chips when irq_domain_remove() is invoked, removing
the need for manual cleanup calls in error paths and remove callback. |
| NLnet Labs Unbound 1.22.0 up to and including 1.26.1, has a use-after-free vulnerability when compiled for DNS-over-QUIC support with '--with-libngtcp2'. Each DoQ stream owns an output buffer that holds the DNS response. ngtcp2's retransmission buffer keeps a shallow pointer into the output buffer for as long as a STREAM frame may be resent. On a client RESET_STREAM, the output buffer is freed but ngtcp2 still holds the matching retransmission entries. The next PTO timeout makes ngtcp2 re-encode the STREAM frame and copy from the freed buffer. A malicious actor that can query Unbound over DoQ and that withholds ACKs, sends RESET_STREAM, and waits for PTO, reaches this use-after-free with no privilege. This leads to retransmissions against freed memory and eventually an abnormal server exit under a 20-query spray. |
| NLnet Labs Unbound 1.12.0 up to and including 1.26.0 has a use-after-free vulnerability when compiled for DNS-over-HTTPs support with '--with-libnghttp2'. During failure code paths (i.e., RPZ drop query, jostle due to heavy traffic), a dropped DoH stream brings down the whole DoH session and does not account properly for other DoH streams in the same session. This leads to use-after-free in those code paths. If the prerequisites are satisfied (possible RPZ drop or heavy client traffic), a malicious actor can trigger the vulnerability with a single DoH connection and the appropriate traffic. Impact is limited as the reads are not user controlled and the use-after-free leads to early returns. However, a hardened allocator can catch the use-after-free and controllably terminate the process resulting to denial of service. |
| ImageMagick before 7.1.2-31 and before 6.9.13-56 contains a use-after-free vulnerability in the ImagesToBlob method, caused by a pointer that is not updated correctly. Exploitation may result in a limited availability impact (e.g., a crash of the affected process). The issue is fixed in versions 7.1.2-31 and 6.9.13-56. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during admin state revocation
A stateid holds only a bare pointer to its nfs4_client; a stateid
reference does not pin it. The client survives only because
__destroy_client() drains its stateids before free_client() runs.
nfsd4_revoke_states() drops nn->client_lock across revoke_one_stid(),
which dereferences the client to revoke a stateid and read
clp->cl_minorversion. A teardown racing the dropped lock can free
the client first.
Pinning cl_rpc_users under client_lock blocks the DESTROY_CLIENTID and
EXCHANGE_ID teardown, which refuses while cl_rpc_users is non-zero.
force_expire_client() ignores it: once its wait for cl_rpc_users to
reach zero has passed, a later pin goes unnoticed.
Under client_lock, skip a client whose cl_time is already zero --
force_expire_client() clears it there before waiting -- otherwise pin
cl_rpc_users before dropping the lock. The walk then either sees the
expiry and skips, or pins in time for that wait to cover the revoke. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reorder rpcrdma_rn_unregister before rdma_destroy_id
svc_rdma_free() caches rdma->sc_cm_id->device before teardown,
then calls rdma_destroy_id(sc_cm_id) which frees the cm_id.
rpcrdma_rn_unregister() follows, but between those two calls
the transport's sc_rn entry is still installed in the device's
rd_xa. A concurrent ib_unregister_device walk can dispatch
svc_rdma_xprt_done() against the now-freed sc_cm_id.
Move rpcrdma_rn_unregister() before rdma_destroy_id() so the
transport's notification entry is removed from the xarray before
the cm_id it references is destroyed.
Also guard the sc_cm_id dereference with a NULL check: the
following patches introduce paths that reach svc_rdma_free()
with sc_cm_id == NULL (listener create failure, ADDR_CHANGE
replacement failure). |
| A heap-use-after-free vulnerability exists in H5T__conv_f_f() in src/H5Tconv.c in HDF5 before 1.14.2. When converting a compound datatype containing floating-point members during a dataset read, a temporary buffer allocated with calloc() is freed and subsequently read from within the same conversion routine. An attacker who can supply a crafted HDF5 file containing a specially constructed compound datatype can trigger the use-after-free when the file is parsed by an application that reads the affected dataset, such as h5dump. This can result in a crash and, depending on heap layout and allocator behavior, may be exploitable for further memory corruption up to remote code execution. |
| Use after free in Internals in Google Chrome prior to 153.0.8010.47 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| Use after free in Skia in Google Chrome prior to 153.0.8010.47 allowed a remote attacker who had compromised the renderer process to obtain cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| Use after free in DOM in Google Chrome prior to 153.0.8010.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
