| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An integer overflow vulnerability in the license manager service could allow an unauthenticated attacker to crash the service. |
| A ThreadX module chooses `object_size` when it calls `txm_module_object_allocate`. The Module Manager adds its own 16-byte private header to that size and asked the object pool for the result **without checking the addition**. A size near the top of a `ULONG` wrapped, the pool served a block far smaller than the header, and the manager then wrote the header past the end of it and into the neighbouring byte-pool block. |
| Integer overflow or wraparound in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
af_packet: fix integer overflow in prb_calc_retire_blk_tmo()
prb_calc_retire_blk_tmo() computes in 32-bit int arithmetic:
mbits = (blk_size_in_bytes * 8) / (1024 * 1024);
If I'm reading the validation right, tp_block_size is user
controlled and packet_set_ring() only rejects values that are <= 0
as int or not page aligned, so a 256MiB block goes right through
(and alloc_one_pg_vec_page() even has a vzalloc fallback for it).
0x10000000 * 8 wraps to INT_MIN, and on a NIC reporting 1 Gbps
(div == 1) the function ends up returning -2047.
The condition is actually (8 * size) mod 2^32 >= 2^31 && div == 1,
so the trigger set is [256,512), [768,1024), [1280,1536) and
[1792,2048) MiB. Other sizes wrap to non-negative values and faster
links divide the unsigned value back below 2^31, which is why this
doesn't blow up for everyone.
What makes it fatal is what happens next in init_prb_bdqc():
p1->interval_ktime = ms_to_ktime(prb_calc_retire_blk_tmo(...));
hrtimer_start(&p1->retire_blk_timer, p1->interval_ktime,
HRTIMER_MODE_REL_SOFT);
A negative relative timeout expires immediately. The callback
unconditionally returns HRTIMER_RESTART, and hrtimer_forward() turns
the negative interval into hrtimer_resolution:
if (interval < hrtimer_resolution)
interval = hrtimer_resolution;
So the SOFT timer re-fires at the maximum rate forever, holding
sk_receive_queue.lock each pass. One CPU spins in softirq until the
socket is closed. Repeat with more rings and the machine is gone.
The overflow itself is ancient - it was introduced together with
TPACKET_V3 in f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer
implementation."). Its effect prior to f7460d2989fa ("net:
af_packet: Use hrtimer to do the retire operation", v6.18) was not
as clear-cut, though: the return value was stored into an unsigned
short retire_blk_tov, so a negative result was truncated, and a
0-jiffy delay loop could be programmed as well. Neither is nearly
as detrimental as the immediate maximum-rate spin the hrtimer
conversion turned it into.
(Unrelated to CVE-2019-20812 - that one was the ethtool failure path
returning 0, which now returns DEFAULT_PRB_RETIRE_TOV.)
Reproducer, needs CAP_NET_RAW (a --network host container has it by
default) and a 1 Gbps NIC (QEMU e1000 works):
int fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
bind(fd, ...);
int v = TPACKET_V3;
setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v));
struct tpacket_req3 req = {
.tp_block_size = 0x10000000,
.tp_block_nr = 1,
.tp_frame_size = 2048,
.tp_frame_nr = 0x10000000 / 2048,
.tp_retire_blk_tov = 0,
};
setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &req, sizeof(req));
Compute in 64 bits instead. The operands are already bounded by the
existing validation, so nothing else changes. If you'd prefer a
different fix, just say so and I'll respin. |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.2, raw_to_int in upnp/src/genlib/net/http/httpparser.c parses Content-Length with strtol and casts the resulting long to a 32-bit int before the caller stores it as unsigned int. On LP64 systems, values greater than INT_MAX can truncate or wrap, so the HTTP parser can accept a body length different from the declared value. A remote adjacent-network peer can use the resulting parser disagreement to leave bytes to be interpreted as another request in persistent or proxied contexts, or can make a worker wait for an extremely large body and cause denial of service. This issue is fixed in 2.0.2. |
| Integer overflow or wraparound in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| OpenImageIO before 3.0.20.0, 3.1.x before 3.1.15.0, and 3.2.x before 3.2.0.3-beta1 contains an integer overflow in cineon::Codec::Read that undersizes the scanline buffer, causing a heap out-of-bounds read. Attackers can supply a crafted Cineon file with a huge declared width that wraps the size calculation to zero, so UnPackPacked reads past a 4-byte buffer and crashes the application. |
| [This CNA information record relates to multiple CVEs; the
text explains which aspects/vulnerabilities correspond to which CVE.]
1) XSA-437 (CVE-2023-34321) addressed issues with overflows in
calculations involved in guests flushing caches through
GNTTABOP_cache_flush. Unfortunately the fix there introduced a
calculation which may underflow, resulting in a loop which would - at
least on 64-bit Arm - take excessively long, and which would likely
eventually crash the hypervisor.
This is CVE-2026-102699.
2) GNTTABOP_cache_flush may be issued on memory mapped from another
domain using the grant table interface. However there was no
restriction to disallow the use of invalidate-without-clean against
read-only grant mappings, which may corrupt the granted memory.
This is CVE-2026-102702. |
| Several buffer-growth sites in libmime performed size arithmetic in 32-bit types without overflow checks. On a sufficiently large message the growth guard could fail open, or the buffer could be reallocated smaller than required, and a subsequent memcpy would then write attacker-controlled data across adjacent heap allocations. This vulnerability was fixed in Thunderbird 158. |
| A malformed header in the binary file fed to QBinaryJson::fromBinaryData() can cause undefined behaviour because of out-of-bounds read. |
| Use after free in Windows Universal Disk Format File System Driver (UDFS) allows an authorized attacker to elevate privileges locally. |
| A flaw was found in EAP's jboss-remoting. A remote unauthenticated attacker who can reach :8080 (or :9990, or :4447) and complete an Upgrade: jboss-remoting handshake can cause OOM errors that degrade requests server-wide, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: reject data replies with an out-of-range payload size
recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an
outstanding read request. The peer-supplied payload length reaches it as
the signed int data_size, and two peer-controlled inputs can make it
negative. With a negotiated data-integrity-alg the digest length is
subtracted first, so a reply whose payload is smaller than the digest
underflows data_size. With no integrity algorithm (the default) data_size
is assigned from the unsigned h95/h100 wire length and drbdd() never
bounds it for a payload-carrying command, so a length above INT_MAX casts
it negative; this path needs no non-default feature. The bio receive loop
then computes expect = min_t(int, data_size, bv_len), which is negative,
and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX
into the first mapped page.
The sibling receive path read_in_block() is not affected: it uses an
unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving.
Reject a data reply whose size is negative after the optional digest
subtraction, covering both triggers.
Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen
bytes past a bio page in the receiver, corrupting kernel memory. A node
that reads from its peer (a diskless node, or read-balancing to the peer)
is exposed in the default configuration; data-integrity-alg is not
required. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: Fix error code in smb2_aead_req_alloc()
The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work.
We would have to do something similar to the previous line where it's
cast to int and then long. However, it's simpler to store the return in
an int ret variable.
This bug would eventually result in a crash when dereference the invalid
error pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gue: reject invalid REMCSUM offsets
The REMCSUM option carries an absolute checksum start and checksum field
offset. gue_remcsum() passes them to skb_remcsum_process(), whose
partial path stores offset - start in the u16 skb->csum_offset variable.
If offset is less than start, this underflows.
A forwarded packet can retain CHECKSUM_PARTIAL and reach a NETIF_F_HW_CSUM
driver which trusts the metadata, leading skb_copy_and_csum_dev() to write
two bytes about 64 KiB beyond the destination buffer.
Reject reversed tuples in validate_gue_flags(), after the existing length
validation, so all GUE parsers enforce the ordering in one place. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::FileDownlink SendPartial range validation is vulnerable because unchecked startOffset plus length arithmetic bypasses the range check and stores a wrapped m_endOffset that is inconsistent with m_byteOffset. When an existing source file is larger than a valid startOffset and a SendPartial command supplies a length whose U32 sum with that offset wraps below the file size, under standard F Prime assertion handling, the first data-packet transition reaches FW_ASSERT and aborts or resets the process, causing denial of service. This issue is fixed in version 4.3.0. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: validate firmware patch bounds
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: at76c50x-usb: avoid length underflow in at76_guess_freq()
at76_guess_freq() checks only that the received frame is at least a bare
802.11 header (24 bytes) before subtracting the fixed management-body
offset:
len -= el_off;
For both beacon and probe response frames, el_off is 36. If the frame is
shorter than el_off, subtracting it causes the calculated IE length to
wrap. The length is eventually passed to cfg80211_find_elem_match() as a
very large unsigned value, so the element walk runs beyond the RX skb.
This path is reached from at76_rx_tasklet() while scanning. If the device
delivers a truncated beacon or probe response, the oversized IE length
causes an out-of-bounds read during scanning.
Skip the IE lookup if the frame does not reach the variable elements,
before subtracting el_off. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate stream count in sctp_process_strreset_inreq()
When processing a RESET_IN_REQUEST from a peer,
sctp_process_strreset_inreq() derives the stream count from the
parameter length but does not check whether the resulting
RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN.
The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes
larger than the IN request header (sctp_strreset_inreq, 8 bytes).
Generally, the IP payload is bounded to 65535 bytes, so the stream
list cannot be large enough to trigger the overflow. However, on
interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a
stream list that fits within the incoming IN parameter can cause a
__u16 overflow in sctp_make_strreset_req() when computing the OUT
request size, leading to an undersized skb allocation and a kernel
BUG:
net/core/skbuff.c:207 skb_panic
net/core/skbuff.c:2625 skb_put
net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk
net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req
net/sctp/stream.c:655 sctp_process_strreset_inreq
The local setsockopt path validates the generated reset request size.
However, for an incoming-only reset, it accounts for the smaller IN
request even though the peer must generate an OUT request with the same
stream list. Such a request cannot be completed successfully by the
peer.
Reject peer IN requests whose corresponding OUT request would exceed
SCTP_MAX_CHUNK_LEN. Also tighten the local check so it does not send an
IN request that would require an oversized OUT request from the peer. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix u16 MTU truncation in media and bearer MTU validation
Both TIPC_NL_MEDIA_SET and TIPC_NL_BEARER_SET accept user-supplied
MTU values but only enforce a minimum bound, not a maximum. When a user
sets the MTU to a value exceeding U16_MAX (65535), it passes validation
but is silently truncated when assigned to u16 fields l->mtu and
l->advertised_mtu in tipc_link_create(). Values like 65536 (0x10000)
truncate to 0, causing a division by zero in tipc_link_set_queue_limits()
which computes TIPC_MAX_PUBL / (l->mtu / ITEM_SIZE). Other overflowing
values (e.g. 65537-131071) produce small incorrect MTU values, resulting
in link malfunction behaviors.
Crash stack (triggered as unprivileged user via user namespace):
tipc_link_set_queue_limits net/tipc/link.c:2531
tipc_link_create net/tipc/link.c:520
tipc_node_check_dest net/tipc/node.c:1279
tipc_disc_rcv net/tipc/discover.c:252
tipc_rcv net/tipc/node.c:2129
tipc_udp_recv net/tipc/udp_media.c:392
Two independent paths lack the upper bound check:
1. tipc_udp_mtu_bad() -- called from __tipc_nl_media_set() (MEDIA_SET)
2. inline check in __tipc_nl_bearer_set() at bearer.c:1160 (BEARER_SET)
Fix both by rejecting MTU values above U16_MAX. |
