| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate pitch coming from userspace
Validate the pitch, alongside the box dimensions before trying
to copy data from the underlying surface. Fixes possible
out of bounds reads with cursor snooping. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Size page table preallocation by device address
Commit 0a8224058a58 ("drm/imagination: Fix page count for page table for
map() interface") passed the device address to
pvr_mmu_op_context_create(), but the preallocation is still sized from
device_addr + sgt_offset with an exclusive end. The offset into the
object's pages has no place in a device-virtual range, and the exclusive
end allocates one table too many when the range ends on a table
boundary.
Count the tables from device_addr and the inclusive end of the range.
The new calculation does not take page table indices into account. This
fixes another issue with the previous implementation, where the
difference between start and end indices could underflow when a mapping
crossed a page table boundary. This would lead to the driver
preallocating a huge number of MMU pages, exhausting system memory and
triggering an out of memory panic.
[Alessio: add paragraph to point out OOM bug being fixed, cc stable] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: free the skb when the DLC has no owner
rfcomm_recv_data() hands the skb to d->data_ready() and returns 0
without freeing it, so the callback owns the skb from that point on.
The tty implementation frees it when the DLC has been detached from its
device:
static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc,
struct sk_buff *skb)
{
struct rfcomm_dev *dev = dlc->owner;
if (!dev) {
kfree_skb(skb);
return;
}
The socket implementation returns without freeing it, and the skb is
leaked.
A connected DLC can have no owner: rfcomm_sock_destruct() clears
d->owner, while the DLC itself stays on the session until it is closed.
Data frames that arrive in that window still find d->state ==
BT_CONNECTED in rfcomm_recv_data() and are handed to the callback, one
leaked skb each.
The leak does not stop on its own either. The remote runs out of
credits only once RFCOMM_RX_THROTTLED is set, and for a socket the only
place that sets it is rfcomm_sk_data_ready() itself, below the return.
rfcomm_process_dlcs() keeps granting credits, so the remote keeps
sending and the leak keeps growing.
Free the skb, as the tty side does. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: serialise sco_conn lifetime against sco_recv_scodata()
sco_recv_scodata() upgrades the weak hcon->sco_data back-pointer to a
strong reference under hdev->lock:
hci_dev_lock(hdev);
hcon = hci_conn_hash_lookup_handle(hdev, handle);
...
conn = sco_conn_hold_unless_zero(hcon->sco_data);
hci_dev_unlock(hdev);
but the pointer is cleared from the other side without that lock. When
the last sco_conn reference is dropped, sco_conn_free() ran
conn->hcon->sco_data = NULL;
with no hdev->lock held, so the RX path could read hcon->sco_data and
call kref_get_unless_zero() on an sco_conn that was concurrently freed:
BUG: KASAN: slab-use-after-free in sco_conn_hold_unless_zero+0xbe/0x160
Write of size 4 by task kworker/u17:0
Workqueue: hci0 hci_rx_work
Call Trace:
sco_conn_hold_unless_zero+0xbe/0x160
sco_recv_scodata+0x13f/0x490
hci_rx_work+0x3af/0x730
kref_get_unless_zero() only guards against a zero refcount, not against
the backing memory already being freed.
Give hcon->sco_data an actual reference on the sco_conn it points to, so
the object cannot be freed while the pointer is still installed, and only
clear and drop it from sco_conn_del(), which runs under hdev->lock (its
callers, sco_connect_cfm() and sco_disconn_cfm(), hold it). The reader in
sco_recv_scodata() also takes hdev->lock, so the store and the read are
now serialised: the RX path either observes NULL or a reference that is
guaranteed to stay valid until it drops its own.
sco_conn_add() no longer hands its kref_init() reference to the caller as
the connection's only reference; that initial reference is the one owned
by hcon->sco_data, and callers get their own via sco_conn_hold().
Because the sco_conn can now outlive the socket (the association keeps it
alive until the link goes down), the hci_conn can no longer be dropped
from sco_conn_free() without regressing socket close: closing a connected
SCO socket must still tear the link down. Move hci_conn ownership to the
socket instead: __sco_chan_add() takes an hci_conn reference and it is
released from sco_chan_del() and sco_sock_destruct(), exactly once. The
sco_conn no longer owns an hci_conn reference, so sco_conn_add() stops
consuming one and sco_connect() drops the hci_connect_sco() reference on
every path; sco_connect_cfm() no longer needs its hci_conn_hold() dance. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Serialize concurrent connect calls
iso_sock_connect() checks the socket state before taking the socket lock
and drops the lock again before setting up a connection. Two callers can
both pass the admission check while the socket is open or bound.
Caller A can copy its destination for route selection, then caller B can
replace the socket destination before A binds or connects the CIS. A
then uses B's destination with the route selected for its own request.
B can also proceed after A attaches a connection and sets BT_CONNECT.
For deferred BIS setup, B can bind a second BIS and overwrite
iso_pi(sk)->conn, leaving the first connection's reference and conn->sk
back-pointer stranded. Concurrent CIS connects can likewise replace the
socket's connection. Later teardown only detaches the current connection,
so a callback on the old connection can race with socket release and
access a freed socket.
KASAN reported:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0
Call Trace:
iso_sock_hold+0xf7/0x1b0
iso_conn_del+0x7b/0x1d0
iso_connect_cfm+0x186/0x16a0
hci_conn_failed+0x154/0x280
hci_abort_conn_sync+0x3dc/0x7d0
hci_cmd_sync_work+0x173/0x300
Allocated by task 121:
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 121:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
Check admission under the socket lock and mark the connect operation in
progress before publishing its destination. Keep that flag set across
route lookup and connection setup, rejecting another connect with
-EBADFD before it can change the destination or attach a connection.
Clear the flag after either helper returns, including on failure, so a
failed setup can be retried.
A separate flag is needed because the socket lock must be released before
acquiring the HCI device lock, while BT_CONNECT requires an attached
connection. Keep the existing state transitions and the deferred CIS
completion through iso_sock_recvmsg().
Reject an existing socket attachment in __iso_chan_add() before taking
a new reference or publishing either pointer, so every caller preserves
the connection association. Keep the same-socket, same-connection success
case for deferred CIS setup. Reject an attached socket before BIS setup
so a reusable BIS is not claimed before the attachment is rejected.
In CIS setup, reject a different HCI connection before iso_conn_add()
and drop the per-attempt HCI hold directly. An unowned iso_conn may still
carry another reference after detachment, so its destruction cannot be
relied on to release that hold.
iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock,
so the temporary iso_conn_put() frees the ISO candidate and drops its
HCI hold on rejection. iso_conn_ready() uses a freshly allocated,
unpublished child with no connection, making the socket-side rejection
unreachable. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix command skb lifetime during scan setup
During PA sync scan setup, hci_le_set_ext_scan_param_sync() gets the
address used for the PA_LINK lookup from hci_sent_cmd_data(). The
returned pointer borrows storage from sent_cmd or req_skb, without
holding a reference to either skb.
The scan worker runs on req_workqueue while hci_cmd_work() runs on the
separate device workqueue. After the scan worker loads sent_cmd, the
command worker can free and replace it before hci_sent_cmd_data()
dereferences the skb. The command payload can also be freed between
returning from the helper and comparing the address. The connection
lookup's RCU critical section does not protect the command skb.
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_sent_cmd_data+0x27c/0x2f0
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_sent_cmd_data+0x27c/0x2f0
hci_le_set_scan_param_sync+0x43a/0x850
hci_passive_scan_sync+0xb09/0x1460
hci_update_passive_scan_sync+0x47c/0x6e0
hci_le_pa_create_sync+0x200/0xa70
hci_cmd_sync_work+0x13c/0x290
Allocated by task 95:
skb_clone+0x13f/0x340
hci_cmd_work+0x2a9/0x7e0
Freed by task 95:
kmem_cache_free+0xba/0x3a0
hci_cmd_work+0x29c/0x7e0
Use hdev->lock to serialize the address snapshot with sent_cmd
replacement. Protect req_skb replacement and completion cleanup with
the same lock because the helper falls back to that skb. Copy the
address before releasing the lock and use the copy for the existing
RCU-protected connection lookup. Release the mutex before sending or
waiting for commands, preserving the lookup and completion ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: rtsx_usb_ms: complete requests after eject instead of dropping them
memstick_check() can pass its host->removing check just before
rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then
silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject
is set, and drv_remove's cancel_work_sync() can also cancel a queued
handle_req before it picks the request up. Nobody completes
card->mrq_complete.
Once memstick core waits for requests without a timeout ("memstick: core:
wait for request completion before freeing card"), this hangs removal:
memstick_check() never returns and memstick_remove_host() blocks in
flush_workqueue():
INFO: task kworker/u10:3:65 blocked for more than 20 seconds.
Workqueue: kmemstick memstick_check
__wait_for_common
memstick_check
INFO: task kworker/1:1:33 blocked for more than 20 seconds.
Workqueue: usb_hub_wq hub_event
__flush_workqueue
memstick_remove_host
rtsx_usb_ms_drv_remove
Never drop a request. rtsx_usb_ms_request() always schedules handle_req,
and handle_req fails requests with -ENOMEDIUM once eject is set, without
touching the device. drv_remove flushes handle_req instead of cancelling
it, and cancels it only after memstick_remove_host(), when no new
request can arrive, so it cannot run on a freed host.
The host_mutex drain in drv_remove is removed: handle_req always leaves
host->req NULL when it finishes, so the drain never had anything to do,
and it would now race with handle_req. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix use-after-free in dynamic port cleanup
ice_dealloc_dynamic_port() uses dyn_port->vsi->idx to erase the dynamic
port from pf->dyn_ports. However, it frees the VSI before reading the
index for the erase, resulting in a use-after-free.
Follow the reverse of the allocation order in ice_alloc_dynamic_port()
by erasing the xarray entry before freeing the VSI. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmveth: h_free logical LAN on open-fail after register
ibmveth_open() registers the logical LAN, then allocates the RX
buffer pools. A pool failure jumps to out_free_buffer_pools without
h_free_logical_lan(), so PHYP still owns the buffer-list page when
it is unmapped. request_irq() failure already issued the hypercall
before taking the same label.
Move that h_free to the shared post-register unwind so both paths
deregister before the buffer list is unmapped. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak when rings are stopped
GVE does not free XSK buffers when resetting ring state as a part of
stopping queues. This causes all XSK buffers which are posted to the
NIC to be leaked.
Free XSK buffers attached to an allocated buf_state when stopping rings.
This issue was hit in production. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM
The probe function puts the device into the runtime PM active state with
only the "iis" bus clock enabled, but it also sets priv->op_clk to the
parent of the RCLK_SRC mux without enabling it. The runtime PM suspend
callback disables both clocks, so the first runtime suspend after probe
disables op_clk once more than it was enabled.
On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate,
so this triggers the following warning during boot:
WARNING: drivers/clk/clk.c:1270 at clk_core_disable+0xe4/0x23c, CPU#0: kworker/u8:3/45
i2s_bus already disabled
...
Workqueue: pm pm_runtime_work
Call trace:
...
clk_core_disable from clk_disable+0x28/0x34
clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s]
i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x298
genpd_runtime_suspend from __rpm_callback+0x48/0x18c
__rpm_callback from rpm_callback+0x4c/0x50
rpm_callback from rpm_suspend+0xf4/0x718
rpm_suspend from pm_runtime_work+0x9c/0xa0
...
Fix this by enabling op_clk in probe right after getting it, so the clock
state matches the runtime PM active state, and by disabling it in remove. |
| Improper access control in V8 in Google Chrome prior to 156.0.8078.73 allowed a remote attacker to read memory via a crafted HTML page. (Chromium security severity: High) |
| Unauthenticated Cross Site Scripting (XSS) in Easy Property Listings <= 3.5.25 versions. |
| Adobe Experience Manager is affected by a DOM-based Cross-Site Scripting (XSS) vulnerability. An attacker could exploit this issue by manipulating the DOM environment to execute malicious JavaScript within the context of the victim's browser. Exploitation of this issue requires user interaction in that a victim must visit a crafted webpage. Scope is changed. |
| Out-of-bounds read in Windows Error Reporting allows an authorized attacker to disclose information locally. |
| Heap-based buffer overflow in Windows Error Reporting allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows Overlay Filter allows an authorized attacker to elevate privileges locally. |
| Adobe Experience Manager is affected by an Improper Restriction of XML External Entity Reference ('XXE') vulnerability that could result in privilege escalation. A low-privileged attacker could exploit this vulnerability to gain elevated access to internal resources. Exploitation of this issue does not require user interaction. Scope is changed. |
| Time-of-check time-of-use (toctou) race condition in Windows Error Reporting allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows MIDI Service Module allows an authorized attacker to elevate privileges locally. |
