| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds read in Windows IKE Extension allows an authorized attacker to disclose information over a network. |
| Substance3D - Sampler is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Sampler is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Bridge is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound num_export_targets array for mds info v2/v3
ceph_mdsmap_decode() in fs/ceph/mdsmap.c reads num_export_targets from
each per-mds info record and advances the decode cursor by
num_export_targets * sizeof(u32) without first checking that many bytes
remain. The only upper-bound check that catches a runaway cursor
(*p > info_end) is gated on info_v >= 4, because info_end is left NULL
for info_v 2 and 3. When the monitor sends an MDS map whose per-mds
info version is 2 or 3 with an oversized num_export_targets, the cursor
moves past the message front buffer and the later export-targets loop
calls the unchecked ceph_decode_32() on out-of-bounds memory.
A kernel client processes CEPH_MSG_MDS_MAP from its monitor session
(net/ceph/mon_client.c dispatches it; fs/ceph/super.c routes it to
ceph_mdsc_handle_mdsmap(), which sets end to the front buffer bound and
calls ceph_mdsmap_decode()). A malicious or compromised monitor, or an
on-path attacker on an unsigned/unencrypted messenger session, can
therefore drive an out-of-bounds read in the client kernel; on x86_64
with KASAN it is reported as a slab-out-of-bounds read in
ceph_mdsmap_decode(). The decoded values land in the internal
info->export_targets[] array, so the consequence is a kernel
out-of-bounds read, not an information leak to the attacker.
Impact: a malicious or compromised Ceph monitor sending an MDS map with
a per-mds info version of 2 or 3 and an oversized num_export_targets
field triggers an out-of-bounds read in the CephFS client kernel.
Add a ceph_decode_need() for the export-targets array before advancing
the cursor, so the bound is enforced for every info_v >= 2, not only
info_v >= 4. This mirrors the count-then-need idiom already used for
m_data_pg_pools later in the same function.
Compute the export-targets byte count with size_mul() and reuse that
checked length when advancing the cursor, so the attacker-controlled
num_export_targets multiplication fails closed on overflow rather than
relying on the later kcalloc() guard. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound xattr value length in __build_xattrs()
__build_xattrs() decodes the MDS-supplied xattr blob one attribute at a
time. For each attribute it reads a 32-bit name length, advances past the
name bytes, reads a 32-bit value length, records the value pointer, and
advances past the value bytes. The two length fields are read with
ceph_decode_32_safe(), but the value bytes themselves are advanced over
with a bare "p += len" and no ceph_decode_need() check that "len" bytes
remain in the blob.
For every attribute except the last, the next iteration's
ceph_decode_32_safe() on the following name length implicitly verifies
that the previous value did not run past the blob end. The final
attribute has no successor, so its decoded value length is never checked
against the blob bounds. A malicious or compromised metadata server can
set the last attribute's value length larger than the bytes actually
present in the blob.
The blob is a dedicated kvmalloc() allocation sized to the wire length
(ceph_buffer_new() in ceph_fill_inode()). __set_xattr() records the
oversized length in xattr->val_len verbatim, and a later getxattr(2) runs
memcpy(value, xattr->val, xattr->val_len) into a user-supplied buffer,
copying bytes past the end of the allocation back to user space.
Impact: a malicious metadata server discloses adjacent kernel heap bytes
to a local user via getxattr(2) on a CephFS file. Add the missing
ceph_decode_need() so an out-of-bounds value length on the final
attribute fails the decode and returns -EIO instead of being stored. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: harden gss_krb5_unwrap_v2 against short tokens
gss_krb5_unwrap_v2() reads the EC and RRC header fields at ptr+4 and
ptr+6 before validating that the token is at least GSS_KRB5_TOK_HDR_LEN
(16) bytes long, and its rotate_left() helper passes buf->len - base
to xdr_buf_subsegment() without verifying that base <= buf->len. When
a caller hands in a sub-16-byte token, or a token whose declared len
leaves base past the end of the buffer, three distinct failures follow:
gss_krb5_unwrap_v2(offset, len, buf)
ptr = buf->head[0].iov_base + offset
ec = *(ptr + 4) /* OOB read on short head */
rrc = *(ptr + 6) /* OOB read on short head */
rotate_left(offset + 16, buf, rrc)
xdr_buf_subsegment(buf, &subbuf,
base, buf->len - base) /* u32 wrap when base > len */
_rotate_left(&subbuf, shift)
shift %= buf->len /* divide-by-zero when base == len */
After decryption, the cleanup arithmetic has the same shape:
movelen = min_t(unsigned int, buf->head[0].iov_len, len);
movelen -= offset + GSS_KRB5_TOK_HDR_LEN + headskip;
BUG_ON(offset + GSS_KRB5_TOK_HDR_LEN + headskip + movelen >
buf->head[0].iov_len);
The BUG_ON re-adds the value just subtracted, so it reduces to
min(A, B) > A and is permanently false; it cannot catch the unsigned
underflow of movelen, which then drives a ~UINT_MAX-byte memmove().
Add four defense-in-depth guards inside the unwrap core so it is safe
regardless of what its callers validate:
- reject tokens with len - offset < GSS_KRB5_TOK_HDR_LEN before
touching ptr+4/ptr+6;
- bail from rotate_left() when buf->len <= base, covering both the
underflow and zero-length cases;
- return early from _rotate_left() when buf->len is zero, so the
shift %= buf->len modulo cannot fault;
- replace the dead BUG_ON with a live check that returns
GSS_S_DEFECTIVE_TOKEN before the movelen subtraction. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: harden gss_unwrap_resp_priv length checks
gss_unwrap_resp_priv() validates the RPCSEC_GSS opaque length with
offset = (u8 *)(p) - (u8 *)head->iov_base;
if (offset + opaque_len > rcv_buf->len)
goto unwrap_failed;
maj_stat = gss_unwrap(ctx->gc_gss_ctx, offset,
offset + opaque_len, rcv_buf);
Both operands are u32 and the sum is computed in u32. A reply with
opaque_len near 0xffffffff makes offset + opaque_len wrap to a small
value that is below rcv_buf->len, so the bound check passes and
gss_unwrap() is called with end < begin. The check also lacks a
lower bound, so any opaque_len in [0, GSS_KRB5_TOK_HDR_LEN) is
accepted and forwarded to gss_krb5_unwrap_v2(), whose pre-decrypt
header reads at ptr+4 and ptr+6 then run past the token.
A krb5p NFS server returning a crafted RPCSEC_GSS reply can drive
the client into out-of-bounds reads in gss_krb5_unwrap_v2() and the
rotate_left() loop that follows.
Fix by replacing the single combined check with three guards that
are safe in u32 arithmetic and that enforce the RFC 4121 minimum
outer token length:
if (offset > rcv_buf->len)
goto unwrap_failed;
if (opaque_len > rcv_buf->len - offset)
goto unwrap_failed;
if (opaque_len < GSS_KRB5_TOK_HDR_LEN)
goto unwrap_failed;
The first guard makes the subtraction in the second guard
unconditionally safe; offset is derived from a successful
xdr_inline_decode() in the head kvec, so in practice it already
satisfies the bound. The floor mirrors the server-side check added
in commit 5b757c2e57a5 ("SUNRPC: svcauth_gss: enforce krb5 token
minimum length"). |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Fix pcl_for_each_segment for empty chunks
When a parsed chunk list contains a chunk whose ch_segcount is zero,
pcl_for_each_segment computes its inclusive upper bound as
&chunk->ch_segments[ch_segcount - 1]. ch_segcount is u32, so the
subtraction wraps to 0xFFFFFFFF and the bound lands far past the
ch_segments flex array. The loop body then walks unrelated memory at
sizeof(struct svc_rdma_segment) stride until it faults.
A zero-segcount chunk is reachable from the wire:
xdr_check_write_chunk() only rejects segcount values greater than
rc_maxpages, and pcl_alloc_write() links a freshly allocated chunk
onto rc_write_pcl/rc_reply_pcl before its segment-fill loop runs,
so a Write or Reply chunk advertising zero segments leaves
ch_segcount == 0 on the list. When the transport has negotiated
Send-With-Invalidate, svc_rdma_get_inv_rkey() iterates all four
PCLs with pcl_for_each_segment and dereferences segment->rs_handle
on each iteration, turning the underflow into an out-of-bounds read
and a general protection fault.
xdr_check_write_list / xdr_check_reply_chunk
pcl_alloc_write()
chunk = pcl_alloc_chunk(...) /* ch_segcount = 0 */
list_add_tail(&chunk->ch_list, &pcl->cl_chunks)
/* fill loop iterates zero times for wire segcount 0 */
svc_rdma_get_inv_rkey()
pcl_for_each_chunk(rc_write_pcl)
pcl_for_each_segment(segment, chunk)
pos <= &ch_segments[0u - 1u] /* 0xFFFFFFFF */
segment->rs_handle /* OOB read -> GPF */
Fix by switching the macro to a half-open upper bound that uses
ch_segcount directly. For ch_segcount == 0 the loop start equals the
loop end and the body is skipped; for ch_segcount > 0 the iteration
range is unchanged. All six existing call sites in
net/sunrpc/xprtrdma/svc_rdma_recvfrom.c and
net/sunrpc/xprtrdma/svc_rdma_rw.c remain correct under the new bound,
so no caller changes are needed. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: fix out-of-bounds check for cqe->len_list[]
Move index check before element access. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Fix OOB read in hid_get_report for numbered reports
When a caller passes a size of 0 to hid_report_raw_event() for a
numbered report, the function originally called hid_get_report() before
performing any size validation.
Inside hid_get_report(), if the report is numbered (report_enum->numbered
is true), it unconditionally dereferences data[0] to extract the report ID.
With a size of 0, this results in an out-of-bounds read or kernel panic.
Fix this by moving the numbered report size validation check before the
call to hid_get_report(), ensuring that size is at least 1 before
dereferencing the data pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read
parse_dcc() treats data_end as an inclusive end pointer, but its only
caller passes data_limit = ib_ptr + datalen, which points one past the
last valid byte.
The newline search loop iterates while tmp <= data_end, so when no
newline is present, *tmp is read at tmp == data_end, one byte beyond
the region filled by skb_header_pointer().
irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is
capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte
is uninitialized or stale; if it contains an ASCII digit, simple_strtoul
will consume it and produce a wrong DCC IP or port in the conntrack
expectation. The extra allocation byte is also a fragile guard: if the
cap or allocation size changes, this becomes a real out-of-bounds read.
Change the loop and its post-loop check to use strict less-than,
consistent with the caller's exclusive-end convention. Update the
function comment accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: ensure accessible eth_hdr proto field
When batadv_get_vid() accesses the proto field of the ethernet header, it
is not checking if the data itself is accessible. The caller is responsible
for it. But in contrast to other call sites, batadv_dat_get_vid() and its
caller didn't make sure this is true. This could have caused an
out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix out-of-bounds read in decompress_lznt
decompress_lznt() does not validate array index bounds before accessing
the decompression table. A corrupted NTFS3 image with invalid compressed
data can trigger an out-of-bounds read.
Add index bounds checking to prevent the OOB access. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (asus_atk0110) Check package count before accessing element
atk_ec_present() walks the management group package returned by the GGRP
ACPI method and, for each sub-package, reads its first element:
id = &obj->package.elements[0];
if (id->type != ACPI_TYPE_INTEGER)
without checking that the sub-package is non-empty. ACPICA allocates the
element array with exactly package.count entries, so for a sub-package
with a zero count this reads past the allocation.
The sibling function atk_debugfs_ggrp_open() performs the same access but
skips empty packages with a package.count check first. Add the same
check to atk_ec_present() so a malformed firmware package cannot trigger
an out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: core: Fix pointer desynchronization in fb_io_read()
In fb_io_read(), if copy_to_user() performs a partial copy (e.g., due to
a faulty user buffer), the loop adjusts the chunk size 'c' and updates
the remaining 'count'. However, the hardware 'src' pointer has already
been eagerly advanced by the original chunk size.
If the loop is allowed to continue, the read will resume from an
incorrect, over-advanced offset. Since the remaining 'count' was only
decremented by the successful bytes, this desynchronization causes the
next iterations to execute more hardware reads than originally bounded,
eventually leading to out-of-bounds I/O reads.
Fix this by breaking out of the loop immediately upon a partial
copy_to_user(). A partial copy indicates a faulty user buffer, making
subsequent read attempts futile. Breaking out ensures we return the
number of successfully read bytes without risking out-of-bounds hardware
accesses in subsequent mismatched iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix multiple unsafe decodes in decode_locker()
decode_locker() in cls_lock_client.c contains three unsafe decode
operations that allow a malicious or compromised OSD to trigger
slab-out-of-bounds reads:
1. ceph_decode_copy() at the locker_id_t name field has no preceding
bounds check. With p == end after ceph_start_decoding() accepts
struct_len=0, this reads sizeof(ceph_entity_name) = 9 bytes past
the validated buffer boundary.
2. *p += sizeof(struct ceph_timespec) after the locker_info_t header
is an unchecked pointer advance. A malicious OSD can position p
past end, causing all subsequent _safe checks to pass against a
bogus boundary.
3. len = ceph_decode_32(p) has no preceding bounds check, and the
immediately following *p += len is uncapped. A malicious OSD can
send len=0xffffffff, advancing p gigabytes past end and escaping
the decode window entirely.
Fix all three by replacing bare operations with their safe variants:
ceph_decode_copy -> ceph_decode_copy_safe
*p += sizeof(...) -> ceph_decode_skip_n
ceph_decode_32(p) -> ceph_decode_32_safe
*p += len -> ceph_decode_skip_n
A new label is added to return -EINVAL on any bounds violation.
-EINVAL is appropriate here: the data received from the OSD
is structurally malformed, which is an invalid argument to the decode
contract regardless of whether the caller or the wire is at fault.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment can trigger this against any kernel client that issues the
lock.get_info class method (e.g. during RBD exclusive lock acquisition)
without any further privileges beyond OSD session establishment.
[ idryomov: use ceph_decode_skip_string() to skip description, trim
changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Avoid using invalid osd indices from primary_temp
A corrupted osdmap received from a Ceph monitor or OSD may contain osd
indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts
that don't exist, i.e., that are greater than max_osd or smaller than
CEPH_HOMELESS_OSD (-1). These indices are used to create the up and
acting set in ceph_pg_to_up_acting_osds(), called from calc_target().
While most of these osd indices are checked, the one from primary_temp
is not. Subsequently, this may lead to calc_target() returning this
(potentially invalid) index as target osd for a (linger) request.
Because the osd_state, osd_weight, and osd_addr arrays only contain
max_osd entries (with indices 0 to max_osd -1), this leads to
out-of-bounds accesses when trying to read values from these arrays.
This patch fixes the issue by adding a check to get_temp_osds(), so that
only valid osd indices from primary_temp are used, and it falls back to
using the primary from pg_temp or the up set if it is invalid.
[ idryomov: changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix OOB read in decode_watchers() via missing bounds check
ceph_start_decoding() validates that struct_len bytes remain in the
buffer after the encoding header, but accepts struct_len=0 as valid:
ceph_decode_need(p, end, 0, bad) always passes. When a malicious or
compromised OSD sends an obj_list_watch_response_t reply with
struct_len=0, ceph_start_decoding() returns success with p == end,
leaving zero bytes guaranteed for subsequent reads.
The immediately following ceph_decode_32(p) in decode_watchers() has
no preceding bounds check. With p == end this is a 4-byte read past
the validated buffer boundary. The garbage value is then passed
directly to kzalloc_objs() as the watcher count.
The sibling function decode_watcher() already uses the safe variants
(ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32)
after its own ceph_start_decoding() call. decode_watchers() is the
only site that uses the bare variant, confirming an oversight.
Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end,
*num_watchers, bad), consistent with the established pattern.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment (e.g. cloud) can trigger this against any kernel client
that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges
beyond OSD session establishment.
[ idryomov: trim changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Ensure index for read/write regions are within range
The introduction of the capability chain rightly clamped the
region indexes to the range of the capabilities itself, but
neglected to do so for the existing read/write regions which
should also be enforced. |
