| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenClaw (npm package 'openclaw') versions >= 2026.6.6 and < 2026.8.1 apply the SMS webhook invalid-request rate limit before Twilio signature verification and identify clients only by the raw proxy socket address. In deployments where the SMS/Twilio webhook sits behind a trusted reverse proxy or tunnel so that multiple external clients share one socket address, an unauthenticated remote sender can exhaust the shared pre-authentication rate-limit budget with invalid requests, causing subsequent correctly signed Twilio callbacks to receive HTTP 429 responses. The result is temporary inbound SMS loss while the shared window remains exhausted; the attacker cannot forge a callback or access message data. Fixed in 2026.8.1. |
| OpenClaw versions before 2026.8.1 contain a resource exhaustion vulnerability in the Gateway listener that allows unauthenticated clients to retain response sockets by sending WebSocket upgrade requests without matching connection semantics. Attackers can repeatedly send malformed upgrade requests to exhaust listener resources and cause denial of service without consuming the WebSocket pre-auth connection budget. |
| OpenClaw (npm package 'openclaw') versions >= 2026.5.28 and < 2026.8.1 mishandle archive listings in the tar.bz2 skill installer: bounded command-output suffixes were treated as complete listings of the archive. A crafted .tar.bz2/.tbz2 skill archive can push prohibited entries out of both retained listings so that entry-count and size checks pass, and the archive is then extracted in full. If an operator approves installation of such a malicious or compromised skill archive, over-limit files or entry counts are persisted in the skill tools directory, consuming disk space or inodes. The issue bypasses OpenClaw's extraction budgets but does not by itself execute archive contents. Fixed in 2026.8.1. |
| vllm before 0.29.0 fails to enforce VLLM_MAX_AUDIO_CLIP_FILESIZE_MB limit in multimodal chat audio decoding, allowing unauthenticated clients to bypass file size restrictions. Attackers can submit oversized audio files through chat endpoints to consume excessive memory and CPU resources during decoding. |
| A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause BOOTP packets to be forwarded between VLANs, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper handling of BOOTP packets on Cisco Catalyst 9000 Series Switches. An attacker could exploit this vulnerability by sending BOOTP request packets to an affected device. A successful exploit could allow an attacker to forward BOOTP packets from one VLAN to another, resulting in BOOTP VLAN leakage and potentially leading to high CPU utilization. This makes the device unreachable (either through console or remote management) and unable to forward traffic, resulting in a DoS condition.
Note: This vulnerability can be exploited with either unicast or broadcast BOOTP packets.
There are workarounds that address this vulnerability. |
| containerd is an open-source container runtime. Prior to versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1, a crafted OCI index graph can force very high CPU/memory usage during PullImage (before container start), causing long ContainerCreating stalls and, at larger sizes, node/runtime instability. Versions 1.7.36, 2.0.13, 2.2.9, 2.3.6, and 2.4.1 fix the issue. |
| A vulnerability exists in the underlying operating system of HPE Networking EdgeConnect SD-WAN Gateways. Successful exploitation could allow an unauthenticated remote attacker to conduct a denial-of-service attack on the affected service. |
| Vulnerabilities in HPE Networking EdgeConnect SD-WAN Gateways could allow an unauthenticated remote attacker to cause a denial-of-service. Successful exploitation could allow an attacker to interrupt the normal operation of the affected service. |
| A vulnerability in the operating system of HPE Networking EdgeConnect SD-WAN Gateways could allow an authenticated local attacker to cause a denial-of-service. Successful exploitation could allow an attacker to disrupt system operations, potentially resulting in an unstable system state. |
| Vulnerabilities in HPE Networking EdgeConnect SD-WAN Gateways could allow an unauthenticated adjacent attacker to conduct denial-of-service attacks. Successful exploitation could allow an attacker to crash the system, preventing it from rebooting without manual intervention and disrupting network operations. |
| A vulnerability in HPE Networking EdgeConnect SD-WAN Gateways could allow an unauthenticated adjacent attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to crash the system, preventing it from rebooting without manual intervention and disrupting network operations. |
| A vulnerability in HPE Networking EdgeConnect SD-WAN Gateways could allow an unauthenticated remote attacker to cause a denial-of-service against certain services running on impacted Gateways. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions prior to 3.2.10, 3.3.12, and 3.4.13 contain an infinite-loop vulnerability in SampleCountChannel. The helper roundListSizeUp() rounds a sample-list size up to the next power of two using repeated unsigned left shifts, which terminates for normal values but fails for UINT_MAX: the sequence reaches 0x80000000, and the next left shift wraps the 32-bit value to 0. Because 0 remains less than UINT_MAX, the loop never progresses and never exits. The bug is reachable through public OpenEXRUtil APIs, either by editing the sample-count buffer through SampleCountChannel::Edit (whose destructor calls endEdit()) or by calling SampleCountChannel::set(x, y, UINT_MAX) on a valid pixel. This issue has been fixed in versions 3.2.10, 3.3.12, and 3.4.13. |
| The divi-dash WordPress plugin before 1.0.7 does not validate the source of the client IP address it uses for rate limiting and banning, allowing unauthenticated attackers to spoof arbitrary IP addresses in order to bypass rate limiting, ban chosen addresses from the feature, and grow a stored option without bound, resulting in denial of service. |
| An issue in EGO-Planner-v2 All versions up to commit 5c99a95880401e2599638d567abc0e240396cb42 allows an attacker to cause a denial of service via the checkCollisionCallback, execFSMCallback, planFromGlobalTraj in ego_replan_fsm.cpp |
| An issue in ZJU-FAST-Lab EGO-Planner-v2 All versions up to commit 5c99a95880401e2599638d567abc0e240396cb42 allows an attacker to cause a denial of service via the EGOReplanFSM component |
| Vulnerability in the Oracle Net Services component of Oracle Database Server. Supported versions that are affected are 19.3-19.32, 21.3-21.23 and 23.4.0-23.26.3. Easily exploitable vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise Oracle Net Services. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Net Services. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| plone.app.dexterity is a content-type system for the Plone content management system, and plone.app.contenttypes provides Plone’s Dexterity-based content types. Plone.app.dexterity versions through 3.2.2, 4.0.0 through 4.1.2, and 5.0.0, and plone.app.contenttypes versions through 3.0.11, 4.0.0 through 4.0.9, and 5.0.0 are vulnerable to denial of service because an authenticated user can create content with excessively long titles, descriptions, or uploaded-file names, causing Plone to become unresponsive and potentially making the resulting content difficult to edit or delete. The vulnerability is patched in plone.app.dexterity versions 3.2.3, 4.1.3, and 5.0.1, and in plone.app.contenttypes versions 3.0.12, 4.0.10, and 5.0.1. |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's Apple Preferred Executable Format loader was vulnerable because the PEF loader accepted relocSecCount values that were not bounded by the number of sections or complete relocation records in the input. The vulnerability is triggered by normal binary-format auto-detection of a small crafted Apple PEF file. The loader could perform up to 268,435,456 relocation-section iterations and repeated buffer operations after record offsets passed the end of the file. This can cause denial of service through excessive CPU consumption and prolonged processing. This issue is fixed in version 6.2.0. |
| Uncontrolled Resource Consumption (CWE-400 / CWE-407) in the ANTLR 3 search query parser (QueryParser / Query.g) in Gerrit Code Review versions 2.0.19 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a persistent denial of service (CPU exhaustion and HTTP worker thread pool starvation requiring a server restart) via crafted search queries containing deeply nested parentheses sent to query evaluation endpoints (/changes/?q=, /accounts/?q=, /groups/?query=, /projects/?query=, /Documentation/?q=, /changes/{id}/query?expression=, or SSH gerrit query). Because syntactic predicates in conditionOr and conditionAnd recurse via conditionBase without memoization prior to capability or visibility checks and worker threads do not abort when the client disconnects, a small number of requests (such as 25 requests matching default httpd.maxThreads) can permanently pin all HTTP worker threads. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
