Export limit exceeded: 26069 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26162 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63988 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in sysfs path Since the start of the git history, brport_store() always acquired the bridge lock. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function was only used by two STP related attributes (cost and priority). Nowadays, brport_store() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port: Only requires RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the two STP related attributes that require it. Remove the now stale comment from br_switchdev_set_port_flag(). The SWITCHDEV_F_DEFER flag can be removed in net-next. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 5 locks held by bash/372: #0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740) #1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343) #2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344) #3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326) #4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235) brport_store (net/bridge/br_sysfs_if.c:346) kernfs_fop_write_iter (fs/kernfs/file.c:352) new_sync_write (fs/read_write.c:595) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | ||||
| CVE-2026-63989 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in netlink path Since the introduction of the netlink configuration path for bridge ports in commit 25c71c75ac87 ("bridge: bridge port parameters over netlink"), br_setport() was always called with the bridge lock held around it. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function only processed three STP related netlink attributes (cost, priority and state). Nowadays, br_setport() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port and NHID: Only require RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the three STP related attributes that require it. This is consistent with the multicast attributes where each attribute acquires the multicast lock instead of having one critical section for all relevant attributes. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 2 locks held by bridge/356: #0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002) #1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) br_setport (net/bridge/br_netlink.c:1000) br_setlink (net/bridge/br_netlink.c:1118) rtnl_bridge_setlink (net/core/rtnetlink.c:5572) rtnetlink_rcv_msg (net/core/rtnetlink.c:7005) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4)) ____sys_sendmsg (net/socket.c:2698) ___sys_sendmsg (net/socket.c:2752) __sys_sendmsg (net/socket.c:2784) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | ||||
| CVE-2026-63990 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: refuse to enslave CAN devices syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-layer mechanisms. While generic loopback devices are blocked globally in net/core/dev.c, virtual CAN devices bypass this check because they do not carry the IFF_LOOPBACK flag, despite acting as local software-loopbacks. Fix this by explicitly blocking network devices of type ARPHRD_CAN from being enslaved at the very beginning of bond_enslave(). This prevents illegal state mutations, eliminates the resulting KASAN crashes, and avoids potential memory leaks from incomplete socket cleanups. As the CAN support has been added a long time after bonding the Fixes-tag points to the introduction of ARPHRD_CAN that would have needed a specific handling in bonding_main.c. | ||||
| CVE-2026-63991 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt() The skb_clone() function can return NULL if memory allocation fails. send_mcast_pkt() calls skb_clone() without checking the return value, which can lead to a NULL pointer dereference in send_pkt() when it dereferences skb->data. Add a NULL check after skb_clone() and skip the peer if the clone fails. | ||||
| CVE-2020-35501 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-07 | 3.4 Low |
| A flaw was found in the Linux kernels implementation of audit rules, where a syscall can unexpectedly not be correctly not be logged by the audit subsystem | ||||
| CVE-2020-14304 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 4.4 Medium |
| A memory disclosure flaw was found in the Linux kernel's ethernet drivers, in the way it read data from the EEPROM of the device. This flaw allows a local user to read uninitialized values from the kernel memory. The highest threat from this vulnerability is to confidentiality. | ||||
| CVE-2025-3928 | 3 Commvault, Linux, Microsoft | 3 Commvault, Linux Kernel, Windows | 2026-10-07 | 8.8 High |
| Commvault Web Server has an unspecified vulnerability that can be exploited by a remote, authenticated attacker. According to the Commvault advisory: "Webservers can be compromised through bad actors creating and executing webshells." Fixed in version 11.36.46, 11.32.89, 11.28.141, and 11.20.217 for Windows and Linux platforms. This vulnerability was added to the CISA Known Exploited Vulnerabilities (KEV) Catalog on 2025-04-28. | ||||
| CVE-2026-58649 | 3 Apple, Linux, Microsoft | 9 Macos, Linux Kernel, .net and 6 more | 2026-10-07 | 6.5 Medium |
| Origin validation error in .NET allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-98361 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Restore HMM_PFN_WRITE check in ODP write paths Commit 0b261d7c1cd3 ("RDMA/rxe: Break endless pagefault loop for RO pages") dropped the access permission test from rxe_check_pagefault() and left only HMM_PFN_VALID. A page faulted in read-only, for example a page-cache folio behind a PROT_READ file mapping, then satisfies the check and ODP write operations (RDMA WRITE, RDMA READ response, SEND payload, atomics) modify it through kmap without ever breaking CoW. An unprivileged user can register an ODP MR over such a mapping and have incoming RDMA traffic overwrite the page cache of a file it only holds O_RDONLY, including /etc/passwd or setuid binaries. This is the same primitive class as Dirty COW and CVE-2022-2590. mlx5 has the missing invariant: its ODP path sets the device write bit only for pfns that carry HMM_PFN_WRITE. Restore it in rxe by requiring HMM_PFN_WRITE in rxe_check_pagefault() for every operation except RXE_PAGEFAULT_RDONLY. A write to a non-writable VMA now fails the one fault attempt with -EPERM from hmm_vma_fault() instead of re-faulting forever. For a writable VMA the fault breaks CoW and the write lands in the private page. Keep pmem flushes on the read-only check. arch_wb_cache_pmem() never modifies memory, and the FLUSH access bits do not make the umem writable, so classifying flushes as writes would make every flush against a flush-only MR fail. | ||||
| CVE-2026-98358 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: IB/iser: reject a remote invalidation of an unregistered direction A write command whose data is sent entirely as immediate data is not registered. iser_reg_mem_fastreg() takes the DMA key path and leaves rdma_reg[ISER_DIR_OUT].desc at NULL, while iser_dma_map_task_data() has already set dir[ISER_DIR_OUT]. iser_check_remote_inv() looks at dir[] alone and hands the descriptor to iser_inv_desc(), which reads desc->sig_protected. A target that answers such a command with IB_WR_SEND_WITH_INV faults the initiator. Leaving those commands unregistered is deliberate. The same function already terminates the connection when a target sends a remote invalidation the initiator did not ask for. A target that invalidates a direction that was never registered is in the same class, so give it the same answer. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 0 UID: 0 PID: 40 Comm: kworker/u8:2 Not tainted 7.2.0-rc5-ISERHOST-gf5098b6bae76-dirty #3 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: rxe_wq do_work RIP: 0010:iser_task_rsp+0x6d6/0xec0 Code: 48 c1 ea 03 80 3c 02 00 0f 85 ba 06 00 00 48 8b 9b 78 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 20 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 76 06 00 00 80 7b 20 00 0f 84 3d 04 RSP: 0018:ffff88811b008db8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000001848 RDX: 0000000000000004 RSI: 1ffff11021587b12 RDI: 0000000000000020 RBP: ffff88810adc1ae4 R08: ffff888109b7f860 R09: ffffffff90a922c0 R10: ffff88810adc1a1c R11: 000000000000003c R12: ffff888109b7f800 R13: ffff88810adc1acc R14: ffff888109b7f820 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88818a676000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000005afe2b CR3: 000000010af23005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <IRQ> __ib_process_cq+0xe1/0x390 ib_poll_handler+0x6e/0x200 irq_poll_softirq+0x1df/0x480 ? clockevents_program_event+0x2ba/0x860 ? __pfx_irq_poll_softirq+0x10/0x10 handle_softirqs+0x18e/0x590 ? __pfx_handle_softirqs+0x10/0x10 ? __hrtimer_rearm_deferred+0x156/0x450 do_softirq+0x3b/0x60 </IRQ> <TASK> __local_bh_enable_ip+0x61/0x70 __alloc_skb+0x732/0x890 ? _raw_spin_lock_irqsave+0x85/0xe0 ? __pfx___alloc_skb+0x10/0x10 ? _raw_read_unlock_irqrestore+0x16/0x50 rxe_init_packet+0x16b/0x4f0 prepare_ack_packet+0xb8/0x830 rxe_receiver+0x499/0x9980 ? __pfx_rxe_receiver+0x10/0x10 ? rxe_completer+0x29e5/0x38c0 ? hrtimer_start_range_ns_common+0x75f/0x1730 ? hrtimer_start_range_ns+0xa6/0x2c0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx_rxe_receiver+0x10/0x10 do_work+0x144/0x470 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-98360 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds rxe_get_mcg() publishes a newly allocated multicast group in rxe->mcg_tree before programming the backing Ethernet multicast address with rxe_mcast_add(), which runs outside mcg_lock. A local userspace RDMA client reaches this path with ATTACH_MCAST on a UD QP; if rxe_mcast_add() then returns an error (for example -ENODEV when the backing netdev has been removed, or a propagated dev_mc_add() error), the unwind frees the published group without removing it from the tree. A later lookup of the same MGID dereferences the freed struct rxe_mcg from __rxe_lookup_mcg(). Fix this by keeping the new mcg private until rxe_mcast_add() succeeds. Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add() before taking the tree reference, and free the still-private mcg on failure. Because the group is never visible in mcg_tree until the multicast address is programmed, no concurrent caller can look it up or attach a QP to a group that is about to be torn down, so the error path needs no conditional unwind. If another caller publishes the same MGID while the address is being programmed, the post-add re-check under mcg_lock finds the winner; this caller then drops its private object and balances its own rxe_mcast_add() with rxe_mcast_del() before returning the winner. Reproduced by forcing the rxe_mcast_add() error return under KASAN: without the change the next attach to the same MGID reports a slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure returns cleanly. A no-injection attach/detach regression, including a two-QP shared join/leave and re-attach, stays KASAN- and leak-clean. | ||||
| CVE-2026-98354 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Fix receive buffer leak when PKey enforcement fails ib_mad_complete_recv() initializes mad_recv_wc->rmpp_list and then runs ib_mad_enforce_security() before linking recv_buf onto that list. On failure it calls ib_free_recv_mad(), which only walks rmpp_list and frees the ib_mad_private of every buffer found there. As the list is still empty at that point, nothing is freed at all. The caller cannot clean up either: ib_mad_recv_done() sets recv to NULL right after ib_mad_complete_recv() returns, assuming the MAD layer took ownership of the buffer. Every MAD that fails the PKey check therefore leaks one ib_mad_private (about 300 bytes per IB port MAD, ~2K for OPA), and a remote node can trigger this repeatedly by sending MADs with a wrong PKey. Link recv_buf onto rmpp_list right after the list is initialized, so the error path has something to free. | ||||
| CVE-2026-98369 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: add missing rcu_read_lock(), skb_dst_force() and dev_hold() for xfrm_trans_reinject() syzbot reported a suspicious RCU usage warning in ip6_pkt_drop(): WARNING: suspicious RCU usage in ip6_pkt_drop include/net/addrconf.h:389 suspicious rcu_dereference_check() usage! Call Trace: __in6_dev_get_safely include/net/addrconf.h:389 [inline] ip6_pkt_drop+0x596/0x610 net/ipv6/route.c:4620 ip6_pkt_discard+0x1c/0x30 net/ipv6/route.c:4651 xfrm_trans_reinject+0x324/0x630 net/xfrm/xfrm_input.c:806 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486 When commit 4f4920669d21 ("xfrm: Reinject transport-mode packets through workqueue") converted xfrm_trans_reinject from a tasklet to a workqueue, the reinjection loop ceased running in softirq context. Workqueue workers run in process context where local_bh_disable() does not enter an RCU read-side critical section under CONFIG_PREEMPT_RCU. Because finish callbacks (such as ip6_rcv_finish) expect to run under an RCU read lock (performing route lookups, l3mdev lookups, and accessing RCU-protected data structures), invoking them in workqueue context without rcu_read_lock() triggers RCU lockdep warnings. Furthermore, packets queued to the workqueue via xfrm_trans_queue_net() may carry non-refcounted (noref) dst entries (e.g. from ip_route_input_noref). Additionally, on netdevice unregistration, dst_dev_put() replaces dst->dev with blackhole_netdev, so dst entries do not keep skb->dev alive while queued in the workqueue. Fix these issues by: 1. Calling skb_dst_force(skb) in xfrm_trans_queue_net() while still in the caller's RCU section to ensure dst is reference-counted before queuing. 2. Holding a reference on skb->dev via dev_hold()/dev_put() across workqueue deferral so skb->dev remains valid during finish() callback processing. 3. Acquiring rcu_read_lock() around the finish callback invocation loop in xfrm_trans_reinject(). | ||||
| CVE-2026-98359 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Reject unregistering netdevs in ib_get_eth_speed ib_device_get_netdev() intentionally returns a referenced net_device even when it is unregistering, so matching and cleanup callers can still find the association. The reference keeps struct net_device allocated, but does not guarantee that the device remains operational. ib_get_eth_speed() uses the returned device operationally by invoking its ethtool callback. Although that call is made under RTNL, the function does not verify the registration state first. An asynchronous RDMA port query can therefore call into a netdev after NETDEV_UNREGISTER and ndo_uninit have completed. Check for NETREG_REGISTERED while holding RTNL and return -ENODEV for a device which is being unregistered. Keeping RTNL across the check and the ethtool operation prevents unregister from starting between them. Keep the speed fallback and warning under RTNL as well, so the warning can safely read netdev->name. Drop the netdev reference before releasing RTNL once all accesses to the device are complete. | ||||
| CVE-2026-98239 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix RX checksum use-after-free lan743x_rx_process_buffer() adds each non-first receive buffer to the head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb() linearizes the head and frees the fragment skb metadata. The checksum-success path then writes ip_summed through the local skb pointer, which still points to the final fragment. This causes a use-after-free write when a packet spans more than one receive buffer. Set ip_summed on the surviving head skb instead. Multi-buffer receive can occur after a live MTU increase because existing ring entries keep their old buffer size until they are replenished. A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer packet produced a one-byte KASAN use-after-free write before this change. The same test passed after the change. The driver object also builds with W=1. This was not tested on physical LAN743x hardware. | ||||
| CVE-2026-98241 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm: use full sockets in local error paths xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb->sk as if it always pointed at a full IPv6 socket. That is not guaranteed. TCP SYN-ACK skbs can be owned by a TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower MTU, the local PMTU/error handling path can reach these callbacks with that mini-socket still attached to the skb. The callbacks then miscast the request socket as a full inet/IPv6 socket and can read beyond the request_sock allocation when they access inet_sock or ipv6_pinfo state. Resolve the owner with skb_to_full_sk() in both callbacks and bail out when no full socket is attached. This matches the surrounding XFRM IPv6 PMTU/error logic, which already reasons about full sockets with skb_to_full_sk(). | ||||
| CVE-2026-98282 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba The commit b1af23d836f8 ("KVM: PPC: iommu: Unify TCE checking") unified IOBA parameter checking across KVM and VFIO into iommu_tce_check_ioba(). While doing so, the passed in argument npages is ignored and constant value '1' is used leaving out a possible overflow as the callers can legitimately be using npages > 1 for H_STUFF_TCE or H_PUT_TCE_INDIRECT cases. Fix this by accounting for 'npages', checking for arithmetic overflow, and verifying that the entire requested range (ioba - offset + npages) does not exceed the table capacity 'size'. | ||||
| CVE-2026-98357 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: wait for deferred control PDU completions before releasing the connection isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work item then runs isert_completion_put() -> isert_put_cmd(), which reads isert_conn->conn and takes conn->cmd_lock. Nothing orders that work item against teardown. isert_wait_conn() queues isert_release_work, which frees isert_conn, and iscsit_close_connection() frees the iscsit_conn right after it returns, so the queued work can run against freed memory. Count the deferred control PDU completions per connection and let isert_wait_conn() wait for them before the release work is queued. ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs iscsit_logout_post_handler(), which ends up waiting for conn->conn_wait_comp, and that completion is only sent by iscsit_close_connection() after it has called iscsit_wait_conn(). Waiting for it here would deadlock. Its wait stays the existing isert_wait4logout(). The splat below is from a kernel with tracing printk()s and an msleep(200) injected into isert_do_control_comp() to widen the window: BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620 Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182 CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy) Tainted: [B]=BAD_PAGE Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: isert_comp_wq isert_do_control_comp Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x630 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x3e/0x70 ? isert_put_cmd+0x53d/0x620 kasan_report+0xce/0x100 ? isert_put_cmd+0x53d/0x620 isert_put_cmd+0x53d/0x620 ? isert_completion_put+0x305/0x330 ? isert_do_control_comp+0x2ef/0x310 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 48: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x158/0x370 isert_cma_handler+0x1e3/0x2ae0 cma_cm_event_handler+0x3e/0x240 cma_ib_req_handler+0x17d9/0x4490 cm_process_work+0x41/0x330 cm_work_handler+0x5727/0xc160 process_one_work+0x633/0x1030 worker_thread+0x45b/0xd10 kthread+0x2c6/0x3b0 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 Freed by task 184: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x121/0x380 iscsit_close_connection+0x7cf/0x1e60 iscsit_take_action_for_connection_exit+0x1b6/0x360 iscsi_target_tx_thread+0x472/0x690 kthread+0x2c6/0x3b0 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-98261 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix server use-after-free in cifs_chan_skip_or_disable() When a secondary channel is no longer supported by the server, cifs_chan_skip_or_disable() drops the channel reference with cifs_put_tcp_session() and then continues to use the server pointer by calling cifs_signal_cifsd_for_reconnect() on it and reading its primary_server pointer. cifs_put_tcp_session() can drop the last reference of the channel and tear it down, so both the channel and the primary server (whose reference is also dropped by cifs_put_tcp_session()) can be freed before they are signaled for reconnect. Signal the channel and the primary server and capture the primary server pointer before dropping the channel reference with cifs_put_tcp_session(). | ||||
| CVE-2026-98174 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix rlist race and missing initialization TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next and ->prev to NULL instead of pointing to itself, making list_empty() always return false and list_add() dereference a NULL ->prev pointer. Also, cifs_signal_cifsd_for_reconnect() can be called concurrently from multiple cifsd threads, allowing the same server's rlist node to be added twice into the local list, corrupting it. | ||||