| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In ssh-agent in OpenSSH before 10.5, some operations can occur remotely but were intended to occur only locally, including operations that add tokens or use keys. This is caused by misinteraction between agent locking and the session-bind@openssh.com extension. |
| A vulnerability in the ingress flow creation functionality of Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the CPU to increase upwards of 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect handling of an internal software lock that could prevent other system processes from getting CPU cycles, causing a high CPU condition. An attacker could exploit this vulnerability by sending a steady stream of malicious IP packets that can cause connections to be created on the targeted device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition during which traffic through the device could be delayed. This vulnerability applies to either IPv4 or IPv6 ingress traffic. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 2100 Series Security Appliances, Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvf63718. |
| Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass the configured file policies on an affected system. The vulnerability is due to errors in how the Snort detection engine handles specific HTTP responses. An attacker could exploit this vulnerability by sending crafted HTTP packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured file policies and deliver a malicious payload to the protected network. |
| A vulnerability in Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to overwrite or append arbitrary data to system files using root-level privileges. The attacker must have administrative credentials on the device. This vulnerability is due to incomplete validation of user input for a specific CLI command. An attacker could exploit this vulnerability by authenticating to the device with administrative privileges and issuing a CLI command with crafted user parameters. A successful exploit could allow the attacker to overwrite or append arbitrary data to system files using root-level privileges. |
| A vulnerability in the FTP inspection engine of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software fails to release spinlocks when a device is running low on system memory, if the software is configured to apply FTP inspection and an access control rule to transit traffic, and the access control rule is associated with an FTP file policy. An attacker could exploit this vulnerability by sending a high rate of transit traffic through an affected device to cause a low-memory condition on the device. A successful exploit could allow the attacker to cause a software panic on the affected device, which could cause the device to reload and result in a temporary DoS condition. |
| A vulnerability in the local malware analysis process of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to insufficient error handling in the local malware analysis process of an affected device. An attacker could exploit this vulnerability by sending a crafted file through the device. A successful exploit could allow the attacker to cause the local malware analysis process to crash, which could result in a DoS condition. Notes: Manual intervention may be required to recover from this situation. Malware cloud lookup and dynamic analysis will not be impacted. |
| Craft CMS versions >= 5.0.0-RC1 before 5.10.6 and >= 4.0.0-RC1 before 4.18.2 interpolate environment variables and secrets (via ${ENV_VAR} strings in the elementId parameter) into Twig templates before rendering, even when the Twig sandbox is enabled. An authenticated attacker with control panel access can render a malicious sandboxed Twig template and, using a blind error-based technique across many requests, incrementally leak arbitrary environment variables and secrets. These can be abused to forge sessions (via CRAFT_SECURITY_KEY), escalate privileges, and steal database, SMTP, API, or blob storage credentials. Fixed in 5.10.6 and 4.18.2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix shrinker deadlock
With PROVE_LOCKING on an Snapdragon X1 and VM reclaim pressure, we see:
======================================================
WARNING: possible circular locking dependency detected
7.0.0-debug+ #43 Tainted: G W
------------------------------------------------------
kswapd0/82 is trying to acquire lock:
ffff800080ec3870 (reservation_ww_class_acquire){+.+.}-{0:0}, at: msm_gem_shrinker_scan+0x17c/0x400 [msm]
but task is already holding lock:
ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
fs_reclaim_acquire+0xd0/0xf0
dma_resv_lockdep+0x224/0x348
do_one_initcall+0x84/0x5d0
do_initcalls+0x194/0x1d8
kernel_init_freeable+0x128/0x180
kernel_init+0x2c/0x160
ret_from_fork+0x10/0x20
-> #1 (reservation_ww_class_mutex){+.+.}-{4:4}:
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
dma_resv_lockdep+0x1a8/0x348
do_one_initcall+0x84/0x5d0
do_initcalls+0x194/0x1d8
kernel_init_freeable+0x128/0x180
kernel_init+0x2c/0x160
ret_from_fork+0x10/0x20
-> #0 (reservation_ww_class_acquire){+.+.}-{0:0}:
check_prev_add+0x114/0x790
validate_chain+0x594/0x6f0
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
drm_gem_lru_scan+0x1ac/0x440
msm_gem_shrinker_scan+0x17c/0x400 [msm]
do_shrink_slab+0x150/0x4a0
shrink_slab+0x144/0x460
shrink_one+0x9c/0x1b0
shrink_many+0x27c/0x5c0
shrink_node+0x344/0x550
balance_pgdat+0x2c0/0x988
kswapd+0x11c/0x318
kthread+0x10c/0x128
ret_from_fork+0x10/0x20
other info that might help us debug this:
Chain exists of:
reservation_ww_class_acquire --> reservation_ww_class_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(reservation_ww_class_mutex);
lock(fs_reclaim);
lock(reservation_ww_class_acquire);
*** DEADLOCK ***
1 lock held by kswapd0/82:
#0: ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988
stack backtrace:
CPU: 4 UID: 0 PID: 82 Comm: kswapd0 Tainted: G W 7.0.0-debug+ #43 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: LENOVO 21BX0016US/21BX0016US, BIOS N3HET94W (1.66 ) 09/15/2025
Call trace:
show_stack+0x20/0x40 (C)
dump_stack_lvl+0x9c/0xd0
dump_stack+0x18/0x30
print_circular_bug+0x114/0x120
check_noncircular+0x178/0x198
check_prev_add+0x114/0x790
validate_chain+0x594/0x6f0
__lock_acquire+0x4d0/0xad0
lock_acquire.part.0+0xc4/0x248
lock_acquire+0x8c/0x248
drm_gem_lru_scan+0x1ac/0x440
msm_gem_shrinker_scan+0x17c/0x400 [msm]
do_shrink_slab+0x150/0x4a0
shrink_slab+0x144/0x460
shrink_one+0x9c/0x1b0
shrink_many+0x27c/0x5c0
shrink_node+0x344/0x550
balance_pgdat+0x2c0/0x988
kswapd+0x11c/0x318
kthread+0x10c/0x128
ret_from_fork+0x10/0x20
kswapd0 holding fs_reclaim calls the MSM shrinker, which calls
dma_resv_lock. This in turn acquires fs_reclaim.
Fix this deadlock by using dma_resv_trylock() instead, dropping the
subsequently unused passed wait-wound lock 'ticket'.
Patchwork: https://patchwork.freedesktop.org/patch/723564/
[rob: fixup compile errors, replace lockdep splat with somethin
---truncated--- |
| A vulnerability was identified in Mullvad wireguard.sys 0.10.1. The affected element is the function AdapterState of the component IOCTL Handler. Such manipulation leads to improper update of reference count. Local access is required to approach this attack. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix peer refcount leak in TCP error paths
When either the TCP RX or TX error path calls ovpn_peer_hold() followed
by schedule_work(&peer->tcp.defer_del_work), and the work item is already
pending from the other path, schedule_work() returns false and the work
runs only once. Since ovpn_tcp_peer_del_work() calls ovpn_peer_put()
exactly once, the extra reference taken by the losing path is never
dropped, leaking the peer object.
The race window:
CPU0 (strparser/RX error): CPU1 (tcp_tx_work/TX error):
ovpn_peer_hold() <- refcnt+1 ovpn_peer_hold() <- refcnt+2
schedule_work() <- queued schedule_work() <- NO-OP
(work already pending)
ovpn_tcp_peer_del_work runs:
ovpn_peer_del()
ovpn_peer_put() <- refcnt+1
<- peer never freed
Fix by checking the return value of schedule_work() in both paths and
calling ovpn_peer_put() to drop the extra reference if the work was
already pending. ovpn_peer_hold() is kept unconditional in the TX path
as it cannot fail at that point. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix PTP Call Trace during PTP release
If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then
ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will
result in the following PTP release call trace during driver unload:
kernel BUG at lib/list_debug.c:52!
ice_ptp_release+0x332/0x3c0 [ice]
ice_deinit_features.part.0+0x10e/0x120 [ice]
ice_remove+0x100/0x220 [ice]
This was observed when passing PF1 through to a VM. ice_ptp_init()
fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT.
Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and
returning without error, preventing the invalid state transition to
ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from
ICE_PTP_RESETTING after a failed rebuild. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: spear: Initialize completion before requesting IRQ
In the report from Jaeyoung Chung:
"spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in spear_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
spear_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: bpf_local_storage: Always use bpf_mem_alloc in PREEMPT_RT
In PREEMPT_RT, kmalloc(GFP_ATOMIC) is still not safe in non preemptible
context. bpf_mem_alloc must be used in PREEMPT_RT. This patch is
to enforce bpf_mem_alloc in the bpf_local_storage when CONFIG_PREEMPT_RT
is enabled.
[ 35.118559] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 35.118566] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1832, name: test_progs
[ 35.118569] preempt_count: 1, expected: 0
[ 35.118571] RCU nest depth: 1, expected: 1
[ 35.118577] INFO: lockdep is turned off.
...
[ 35.118647] __might_resched+0x433/0x5b0
[ 35.118677] rt_spin_lock+0xc3/0x290
[ 35.118700] ___slab_alloc+0x72/0xc40
[ 35.118723] __kmalloc_noprof+0x13f/0x4e0
[ 35.118732] bpf_map_kzalloc+0xe5/0x220
[ 35.118740] bpf_selem_alloc+0x1d2/0x7b0
[ 35.118755] bpf_local_storage_update+0x2fa/0x8b0
[ 35.118784] bpf_sk_storage_get_tracing+0x15a/0x1d0
[ 35.118791] bpf_prog_9a118d86fca78ebb_trace_inet_sock_set_state+0x44/0x66
[ 35.118795] bpf_trace_run3+0x222/0x400
[ 35.118820] __bpf_trace_inet_sock_set_state+0x11/0x20
[ 35.118824] trace_inet_sock_set_state+0x112/0x130
[ 35.118830] inet_sk_state_store+0x41/0x90
[ 35.118836] tcp_set_state+0x3b3/0x640
There is no need to adjust the gfp_flags passing to the
bpf_mem_cache_alloc_flags() which only honors the GFP_KERNEL.
The verifier has ensured GFP_KERNEL is passed only in sleepable context.
It has been an old issue since the first introduction of the
bpf_local_storage ~5 years ago, so this patch targets the bpf-next.
bpf_mem_alloc is needed to solve it, so the Fixes tag is set
to the commit when bpf_mem_alloc was first used in the bpf_local_storage. |
| The import hook in CPython that handles legacy *.pyc files (SourcelessFileLoader) is incorrectly handled in FileLoader (a base class) and so does not use io.open_code() to read the .pyc files. sys.audit handlers for this audit event therefore do not fire. |
| A memory initialization issue was addressed with improved memory handling. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to cause unexpected system termination. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode
ath11k_hal_srng_* should be used with srng->lock to protect srng data.
For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(),
they use ath11k_hal_srng_* for many times but never call srng->lock.
So when running (full) monitor mode, warning will occur:
RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
Call Trace:
? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k]
? idr_alloc_u32+0x97/0xd0
ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k]
ath11k_dp_service_srng+0x289/0x5a0 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k]
__napi_poll+0x30/0x1f0
net_rx_action+0x198/0x320
__do_softirq+0xdd/0x319
So add srng->lock for them to avoid such warnings.
Inorder to fetch the srng->lock, should change srng's definition from
'void' to 'struct hal_srng'. And initialize them elsewhere to prevent
one line of code from being too long. This is consistent with other ring
process functions, such as ath11k_dp_process_rx().
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix racy issue from session lookup and expire
Increment the session reference count within the lock for lookup to avoid
racy issue with session expire. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Add a lock when accessing the buddy trim function
When running YouTube videos and Steam games simultaneously,
the tester found a system hang / race condition issue with
the multi-display configuration setting. Adding a lock to
the buddy allocator's trim function would be the solution.
<log snip>
[ 7197.250436] general protection fault, probably for non-canonical address 0xdead000000000108
[ 7197.250447] RIP: 0010:__alloc_range+0x8b/0x340 [amddrm_buddy]
[ 7197.250470] Call Trace:
[ 7197.250472] <TASK>
[ 7197.250475] ? show_regs+0x6d/0x80
[ 7197.250481] ? die_addr+0x37/0xa0
[ 7197.250483] ? exc_general_protection+0x1db/0x480
[ 7197.250488] ? drm_suballoc_new+0x13c/0x93d [drm_suballoc_helper]
[ 7197.250493] ? asm_exc_general_protection+0x27/0x30
[ 7197.250498] ? __alloc_range+0x8b/0x340 [amddrm_buddy]
[ 7197.250501] ? __alloc_range+0x109/0x340 [amddrm_buddy]
[ 7197.250506] amddrm_buddy_block_trim+0x1b5/0x260 [amddrm_buddy]
[ 7197.250511] amdgpu_vram_mgr_new+0x4f5/0x590 [amdgpu]
[ 7197.250682] amdttm_resource_alloc+0x46/0xb0 [amdttm]
[ 7197.250689] ttm_bo_alloc_resource+0xe4/0x370 [amdttm]
[ 7197.250696] amdttm_bo_validate+0x9d/0x180 [amdttm]
[ 7197.250701] amdgpu_bo_pin+0x15a/0x2f0 [amdgpu]
[ 7197.250831] amdgpu_dm_plane_helper_prepare_fb+0xb2/0x360 [amdgpu]
[ 7197.251025] ? try_wait_for_completion+0x59/0x70
[ 7197.251030] drm_atomic_helper_prepare_planes.part.0+0x2f/0x1e0
[ 7197.251035] drm_atomic_helper_prepare_planes+0x5d/0x70
[ 7197.251037] drm_atomic_helper_commit+0x84/0x160
[ 7197.251040] drm_atomic_nonblocking_commit+0x59/0x70
[ 7197.251043] drm_mode_atomic_ioctl+0x720/0x850
[ 7197.251047] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10
[ 7197.251049] drm_ioctl_kernel+0xb9/0x120
[ 7197.251053] ? srso_alias_return_thunk+0x5/0xfbef5
[ 7197.251056] drm_ioctl+0x2d4/0x550
[ 7197.251058] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10
[ 7197.251063] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu]
[ 7197.251186] __x64_sys_ioctl+0xa0/0xf0
[ 7197.251190] x64_sys_call+0x143b/0x25c0
[ 7197.251193] do_syscall_64+0x7f/0x180
[ 7197.251197] ? srso_alias_return_thunk+0x5/0xfbef5
[ 7197.251199] ? amdgpu_display_user_framebuffer_create+0x215/0x320 [amdgpu]
[ 7197.251329] ? drm_internal_framebuffer_create+0xb7/0x1a0
[ 7197.251332] ? srso_alias_return_thunk+0x5/0xfbef5
(cherry picked from commit 3318ba94e56b9183d0304577c74b33b6b01ce516) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: set ATTR_CTIME flags when setting mtime
David reported that the new warning from setattr_copy_mgtime is coming
like the following.
[ 113.215316] ------------[ cut here ]------------
[ 113.215974] WARNING: CPU: 1 PID: 31 at fs/attr.c:300 setattr_copy+0x1ee/0x200
[ 113.219192] CPU: 1 UID: 0 PID: 31 Comm: kworker/1:1 Not tainted 6.13.0-rc1+ #234
[ 113.220127] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[ 113.221530] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[ 113.222220] RIP: 0010:setattr_copy+0x1ee/0x200
[ 113.222833] Code: 24 28 49 8b 44 24 30 48 89 53 58 89 43 6c 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 48 89 df e8 77 d6 ff ff e9 cd fe ff ff <0f> 0b e9 be fe ff ff 66 0
[ 113.225110] RSP: 0018:ffffaf218010fb68 EFLAGS: 00010202
[ 113.225765] RAX: 0000000000000120 RBX: ffffa446815f8568 RCX: 0000000000000003
[ 113.226667] RDX: ffffaf218010fd38 RSI: ffffa446815f8568 RDI: ffffffff94eb03a0
[ 113.227531] RBP: ffffaf218010fb90 R08: 0000001a251e217d R09: 00000000675259fa
[ 113.228426] R10: 0000000002ba8a6d R11: ffffa4468196c7a8 R12: ffffaf218010fd38
[ 113.229304] R13: 0000000000000120 R14: ffffffff94eb03a0 R15: 0000000000000000
[ 113.230210] FS: 0000000000000000(0000) GS:ffffa44739d00000(0000) knlGS:0000000000000000
[ 113.231215] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 113.232055] CR2: 00007efe0053d27e CR3: 000000000331a000 CR4: 00000000000006b0
[ 113.232926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 113.233812] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 113.234797] Call Trace:
[ 113.235116] <TASK>
[ 113.235393] ? __warn+0x73/0xd0
[ 113.235802] ? setattr_copy+0x1ee/0x200
[ 113.236299] ? report_bug+0xf3/0x1e0
[ 113.236757] ? handle_bug+0x4d/0x90
[ 113.237202] ? exc_invalid_op+0x13/0x60
[ 113.237689] ? asm_exc_invalid_op+0x16/0x20
[ 113.238185] ? setattr_copy+0x1ee/0x200
[ 113.238692] btrfs_setattr+0x80/0x820 [btrfs]
[ 113.239285] ? get_stack_info_noinstr+0x12/0xf0
[ 113.239857] ? __module_address+0x22/0xa0
[ 113.240368] ? handle_ksmbd_work+0x6e/0x460 [ksmbd]
[ 113.240993] ? __module_text_address+0x9/0x50
[ 113.241545] ? __module_address+0x22/0xa0
[ 113.242033] ? unwind_next_frame+0x10e/0x920
[ 113.242600] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 113.243268] notify_change+0x2c2/0x4e0
[ 113.243746] ? stack_depot_save_flags+0x27/0x730
[ 113.244339] ? set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.244993] set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.245613] ? process_scheduled_works+0xbe/0x310
[ 113.246181] ? worker_thread+0x100/0x240
[ 113.246696] ? kthread+0xc8/0x100
[ 113.247126] ? ret_from_fork+0x2b/0x40
[ 113.247606] ? ret_from_fork_asm+0x1a/0x30
[ 113.248132] smb2_set_info+0x63f/0xa70 [ksmbd]
ksmbd is trying to set the atime and mtime via notify_change without also
setting the ctime. so This patch add ATTR_CTIME flags when setting mtime
to avoid a warning. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: hugetlb: independent PMD page table shared count
The folio refcount may be increased unexpectly through try_get_folio() by
caller such as split_huge_pages. In huge_pmd_unshare(), we use refcount
to check whether a pmd page table is shared. The check is incorrect if
the refcount is increased by the above caller, and this can cause the page
table leaked:
BUG: Bad page state in process sh pfn:109324
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324
flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff)
page_type: f2(table)
raw: 017ffff800000000 0000000000000000 0000000000000000 0000000000000000
raw: 0000000000000066 0000000000000000 00000000f2000000 0000000000000000
page dumped because: nonzero mapcount
...
CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G B 6.13.0-rc2master+ #7
Tainted: [B]=BAD_PAGE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
dump_stack+0x18/0x28
bad_page+0x8c/0x130
free_page_is_bad_report+0xa4/0xb0
free_unref_page+0x3cc/0x620
__folio_put+0xf4/0x158
split_huge_pages_all+0x1e0/0x3e8
split_huge_pages_write+0x25c/0x2d8
full_proxy_write+0x64/0xd8
vfs_write+0xcc/0x280
ksys_write+0x70/0x110
__arm64_sys_write+0x24/0x38
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0x128
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x190/0x198
The issue may be triggered by damon, offline_page, page_idle, etc, which
will increase the refcount of page table.
1. The page table itself will be discarded after reporting the
"nonzero mapcount".
2. The HugeTLB page mapped by the page table miss freeing since we
treat the page table as shared and a shared page table will not be
unmapped.
Fix it by introducing independent PMD page table shared count. As
described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390
gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv
pmds, so we can reuse the field as pt_share_count. |
