| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A service account with user-management permissions in one organization can read, modify, disable or delete users belonging to other organizations on the same Grafana instance through the SCIM API (insecure direct object reference). Only Grafana Enterprise instances with SCIM enabled are affected. |
| MCP TypeScript SDK is the official TypeScript SDK for Model Context Protocol servers and clients. From version 1.24.0 to before version 1.32.0, the experimental tasks feature (taskStore) did not check which session created a task. Clients sharing one InMemoryTaskStore could list, read and cancel each other's tasks. This issue has been patched in version 1.32.0. |
| filelock is a platform-independent file lock for Python. From 4.1.0 until 4.2.1, SoftFileLock versions from 4.1.0 can reuse a stale observation when an attacker pre-dates and removes its own marker, at least two lock-user processes are waiting, coarse or matching modification times preserve the observation, and an honest contender creates a fresh marker on the reused inode, causing that live marker to be removed as stale. This issue is fixed in version 4.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/boot: Disable trapping of PMZR_EL0 writes to EL2
__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.
Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits. |
| Not Failing Securely ('Failing Open') vulnerability in Apache Tomcat. If the OpenSSLLifecycleListener is configured to use FIPS mode but FIPS activation fails, Tomcat logs and error but continues to use JSSE in non-FIPS mode with the provided configuration.
This issue affects Apache Tomcat: from 11.0.0-M14 through 11.0.26, from 10.1.22 through 10.1.60, from 9.0.92 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| Execution After Redirect (EAR) vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.26, from 10.1.0-M1 through 10.1.60, from 9.0.0.M1 through 9.0.122.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.27, 10.1.61, 9.0.123, which fixes the issue. |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the uniqueItems keyword validation uses an O(n²) pairwise comparison loop with no short-circuit or size limit. A remote unauthenticated attacker can submit a moderately-sized JSON array that consumes disproportionate CPU time, leading to denial of service.
The impacted component is io.vertx:vertx-json-schema.
The following Vert.x modules depend on vertx-json-schema and are also affected:
io.vertx:vertx-web-openapi-router io.vertx:vertx-web-validation io.vertx:vertx-openapi |
| Smithy-RS is a Rust code generation and runtime framework that generates HTTP clients and servers from Smithy interface definitions, powering the AWS SDK for Rust and custom service implementations.
Uncontrolled recursion in the JSON, CBOR, and XML deserializer functions emitted by Amazon smithy-rs code generation could allow remote attackers to cause a denial of service (process abort via stack exhaustion) via a small request containing deeply nested data for a recursive model shape to a generated SDK or server.
To mitigate this issue, users should upgrade to aws-sdk-rust release-2026-06-02 or later. Users building custom servers with smithy-rs codegen should regenerate from smithy-rs release-2026-06-01 or later. |
| Xen Orchestra before 6.9.0 contains an authorization bypass vulnerability in the xo-server user.set API method that allows low-privileged authenticated users to modify other users' preferences by supplying an arbitrary target user id. Attackers can delete the preferences.otp TOTP secret to disable two-factor authentication, corrupt it to block logins, or overwrite stored xsCredentials and sshKeys. |
| In the Linux kernel, the following vulnerability has been resolved:
ip_gre: Reject enabling collect metadata through changelink
ipgre_netlink_parms() can enable collect_md on an existing GRE, GRETAP
or ERSPAN device. Unlike newlink, changelink does not enforce metadata
tunnel uniqueness. Converting a non-metadata device can therefore
replace the metadata receive entry for another device of the same type
in the same netns. Deleting either device then clears the shared entry,
breaking metadata receive lookup for the surviving device.
If parameter validation fails after collect_md is set, deleting the
modified device can also clear an entry it never owned.
Reject enabling metadata mode in both changelink callbacks before any
encapsulation or tunnel parameters are modified. Allow requests that
repeat the metadata attribute on an existing metadata device. |
| A vulnerability was found in EspoCRM up to 9.3.10/10.0.10. This affects the function ImageSourceProvider::get of the file application/Espo/Tools/Pdf/Dompdf/ImageSourceProvider.php of the component PDF Rendering Pipeline. Performing a manipulation of the argument ID results in authorization bypass. The attack may be initiated remotely. The patch is named 91a9edbcedb9c7aa8e3d3ac81d8a7acccb99bca2. It is suggested to install a patch to address this issue. |
| Improper validation of the Destination Connection ID length in s2n-quic 1.88.0 and earlier may allow an unauthenticated remote user to cause a denial of service by shutting down a server endpoint via a single crafted UDP datagram. Only server endpoints specifically configured to send Retry packets are affected.
To remediate this issue, users should upgrade to version v1.89.0 or later. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned
long, but the target field (poll_msec) is unsigned int. On 64-bit systems,
a value > UINT_MAX is silently truncated when stored.
Fix the mismatch by using kstrtouint() instead. This rejects values larger
than UINT_MAX at parse time, making truncation impossible. Also add a check
for value < 1 to reject the 0-delay case, which would cause the poll work to
spin without delay and consume 100% CPU. |
| Incorrect authorization in the library-query execution endpoint in Lowcoder version, up to and including 2.4.10, allows an authenticated administrator or developer in one organization to execute a library query belonging to another organization via a crafted request containing the victim library-query identifier. |
| Bandisoft Bandizip before 7.47 fails to propagate Mark-of-the-Web to extracted .ps1 and .psm1 files, allowing attackers to bypass zone-based execution protections. Attackers can deliver unsigned PowerShell scripts or modules in downloaded archives that run under the RemoteSigned policy when the user invokes them. |
| Modoboa before 2.8.0 contains an insecure direct object reference vulnerability that allows authenticated users to create auto-reply messages for arbitrary mailboxes by supplying another user's mbox value. Attackers can POST to /api/v2/armessages/ to inject attacker-controlled auto-reply subject and content into victims' settings or break their auto-reply management via MultipleObjectsReturned errors. |
| Blinko through 1.8.8 contains an insecure direct object reference vulnerability in the tag tRPC router that allows authenticated users to read and modify other users' tags by supplying arbitrary tag IDs. Attackers can enumerate sequential IDs via fullTagNameById, updateTagIcon, and updateTagOrder to reveal private note topics and tamper with tag icons and ordering. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow can exhaust resources while parsing an existing PDF during an append operation. PdfParser follows page-tree child references without cycle or duplication tracking and follows previous-trailer chains with only an exact repeated-offset guard, so deep or cyclic page trees and long chains of unique trailer offsets can exhaust the Python stack. Repeated non-cyclic /Kids references can also cause super-linear CPU and memory use. An attacker can supply such a PDF to an application that calls Image.save with PDF append enabled. This can raise an uncaught RecursionError or consume excessive CPU and memory before output is written, causing denial of service. This issue is fixed in version 13.0.0. |
| IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 does not invalidate session after a logout which could allow an authenticated user to impersonate another user on the system. |
| LearnPress before 4.4.10 contains a missing authorization vulnerability in the admin_course_editor, admin_quiz_editor and admin_question_editor lp-ajax actions, allowing instructors to modify other instructors' content. Authenticated instructors can reuse their own generic editor nonce with another object's id parameter to alter courses, change quiz answers, and trash questions. |
