| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Windows Client-Side Caching (CSC) Service allows an unauthorized attacker to elevate privileges over a network. |
| Untrusted pointer dereference in Windows Container Isolation FS Filter Driver allows an authorized attacker to elevate privileges locally. |
| Untrusted pointer dereference in Windows NTFS allows an authorized attacker to execute code locally. |
| Untrusted pointer dereference in DNS Server allows an unauthorized attacker to execute code over a network. |
| Untrusted pointer dereference in Windows Distributed File System (DFS) allows an unauthorized attacker to elevate privileges over a network. |
| Untrusted pointer dereference in WebDAV allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free inet_opt and ireq_opt after an RCU grace period
tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the
child socket (newinet->inet_opt) without copying it.
Another cpu can concurrently process a retransmitted SYN for the same
request socket, and send a SYNACK from tcp_check_req().
tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt
under rcu_read_lock() only, and ip_build_and_send_pkt() and
ip_options_build() then read opt->optlen twice.
Note that the SYNACK timer itself is not an issue: it holds a
reference on its request socket, and inet_csk_reqsk_queue_drop()
calls timer_delete_sync() before the child can be freed.
Since commit 079096f103fa ("tcp/dccp: install syn_recv requests
into ehash table"), request sockets are processed without holding
the listener lock, so nothing prevents the child socket from being
freed while the SYNACK is still being built. TCP child sockets do
not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt
with a plain kfree(), leading to a use-after-free in
ip_options_build().
A similar issue exists with request socket migration
(net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE
program). reqsk_timer_handler() clones the request socket with
inet_reqsk_clone(), so that the old request socket and its clone
share the same ireq_opt, then reqsk_migrate_reset() clears the
pointer in the old one. Another cpu holding a reference on the old
request socket can still be using these options (sending a SYNACK,
or creating a child in tcp_v4_syn_recv_sock()) when the clone is
freed, and tcp_v4_reqsk_destructor() also uses a plain kfree().
Readers already use RCU, and other paths replacing inet_opt
(do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use
kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and
tcp_v4_reqsk_destructor() as well.
IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock()
duplicates the options. tcp_v6_reqsk_destructor() has the same
migration issue with ipv6_opt, which is only set by CALIPSO. This
will be addressed in a separate patch. |
| Untrusted pointer dereference in Windows OLE allows an unauthorized attacker to execute code over a network. |
| Untrusted pointer dereference in Microsoft Windows Search Component allows an authorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: hold device reference for secondary fwnode teardown
In gpio_secondary_fwnode_init(), acpi_bus_find_device_by_name() returns a
device reference, but the local dev variable is declared with
__free(put_device), dropping the reference at the end of each iteration.
Meanwhile, devm_add_action_or_reset() saves the dev pointer for
gpio_secondary_unset() without incrementing its reference count, which
could lead to a use-after-free during driver teardown if the device is
released in the interim.
Acquire an explicit device reference with get_device() when registering
the devres action, and drop it with put_device() inside
gpio_secondary_unset(). |
| Untrusted pointer dereference in Windows COM+ Event System Service allows an authorized attacker to elevate privileges locally. |
| In JetBrains Junie CLI before 26.8.3 code execution was possible via an untrusted project's MCP server configuration |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown
After a DESTROY_SESSION the per-session teardown path can free a
session while rpciod still holds an inflight callback rpc_task that
dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes
cl_callback_wq, but once nfsd4_run_cb_work() has called
rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue
does not wait for it. rpc_shutdown_client() does drain rpciod tasks,
but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay()
(e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain.
destroy path rpciod
------------ ------
unhash_session(ses)
nfsd4_probe_callback_sync(clp)
flush_workqueue(cl_callback_wq)
/* returns; rpc_task still live */
nfsd4_put_session_locked(ses)
free_session(ses) -> kfree(ses)
nfsd4_cb_sequence_done()
reads cb_clp->cl_cb_session
/* freed slab */
A second window exists in nfsd4_process_cb_update(). When
__nfsd4_find_backchannel() returns NULL because unhash_session() has
already removed the destroyed session from cl_sessions,
setup_callback_client() takes the v4.1 early return so
clp->cl_cb_session = ses never fires and the field retains a pointer
to the about-to-be-freed session.
Fix both by converting cl_cb_session to an RCU-protected pointer:
- Move the cl_cb_session = ses assignment in setup_callback_client()
to after rpc_create() succeeds, so it is only published when a
working backchannel exists. Clear cl_cb_session on the error
return in nfsd4_process_cb_update(). Both stores use
rcu_assign_pointer().
- Annotate cl_cb_session with __rcu. All rpciod-side readers use
rcu_read_lock()/rcu_dereference() and check for NULL, bailing to
the appropriate error or requeue path:
encode_cb_sequence4args(), decode_cb_sequence4resok(),
nfsd41_cb_get_slot(), nfsd41_cb_release_slot(),
nfsd4_cb_prepare(), and nfsd4_cb_sequence_done().
- Switch __free_session() from kfree() to kfree_rcu() so the
session slab is not reclaimed until after an RCU grace period,
guaranteeing that rpciod readers inside rcu_read_lock() never
dereference freed memory.
- Pass the session pointer to the nfsd_cb_seq_status and
nfsd_cb_free_slot tracepoints instead of having them re-read
cl_cb_session.
- nfsd4_cb_prepare() calls rpc_exit() when the session is NULL,
routing through the done/release path to requeue the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix UAF in async copy cancel and shutdown
An async copy could be freed or used after free while a teardown caller
(OFFLOAD_CANCEL, nfsd4_shutdown_copy, nfsd4_cancel_copy_by_sb) raced the
copy kthread:
- find_async_copy() bumped copy->refcount but left the copy on
clp->async_copies, so the reaper's cleanup_async_copy() could run
release_copy_files() concurrently with a cancel/shutdown caller. Both
put and NULL nf_src/nf_dst without a common lock, double-putting the
nfsd_file and freeing it early.
- nfsd4_do_async_copy() set NFSD4_COPY_F_STOPPED before its final uses
of the copy (nfsd_update_cmtime_attr() on copy->nf_dst,
nfsd4_send_cb_offload()). nfsd4_stop_copy() treats a set STOPPED bit
as "kthread done, skip kthread_stop()", so a teardown caller ran
release_copy_files() -- which puts and NULLs nf_dst -- while the
kthread still dereferenced it (NULL/UAF).
- copy->copy_task was never pinned. The one-shot kthread self-reaps on
return, so kthread_stop()'s get_task_struct() could touch a freed
task_struct.
- co_cb is embedded in the copy, but nfsd4_send_cb_offload() held a
reference only on the client, so a concurrent teardown could free
the copy while the CB_OFFLOAD callback was in flight.
Fix the teardown lifetime as a whole:
- find_async_copy() unlinks the copy (clear cp_clp, list_del_init)
under async_lock; the cancel, shutdown, and sb-cancel paths drop the
list-membership reference via nfs4_put_copy() after nfsd4_stop_copy().
Drop the now-redundant list_del fixup from cleanup_async_copy().
- Because unlinking hides the copy from the reaper, its
cleanup_async_copy() can no longer remove the copy's s2s_cp_stateids
entry; the cancel/shutdown/sb-cancel paths now call
nfs4_free_copy_state() themselves (while cp_clp is still valid) so
the entry does not dangle at freed memory for the laundromat and
manage_cpntf_state() to dereference.
- Give the kthread its own reference, taken in nfsd4_copy() before
wake_up_process() and dropped at the end of nfsd4_do_async_copy();
call wake_up_process() before list_add().
- Pin the task_struct with get_task_struct() in nfsd4_copy(), released
in nfs4_put_copy(), so kthread_stop() is safe whenever the kthread
exits. Set NFSD4_COPY_F_STOPPED only in nfsd4_stop_copy(), which now
always kthread_stop()s before release_copy_files(); completion is
still reported via NFSD4_COPY_F_COMPLETED, so
nfsd4_has_active_async_copies() is unaffected. Each teardown caller
removes the copy from clp->async_copies first, so kthread_stop() runs
exactly once.
- Take a copy reference in nfsd4_send_cb_offload(), dropped in
nfsd4_cb_offload_release(). The kthread still holds its own reference
there, so the refcount_inc() cannot race the final free.
- Read cp_clp with smp_load_acquire() to pair with the unordered
set_bit()/clear_bit() writers (Documentation/atomic_bitops.rst). |
| In the Linux kernel, the following vulnerability has been resolved:
audit: avoid dropping live tree ref on fsnotify rule autoremove
audit_del_rule() is used for both netlink deletion templates and internal
fsnotify autoremove. The former passes a parsed template which owns a
temporary tree reference; the latter passes the installed entry itself.
The unconditional audit_put_tree() at the end of audit_del_rule() assumes
the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify
autoremove event therefore drops the installed rule's live tree reference.
Repeating this across rules sharing the same tree can free the tree while
another rule still references it, and a later autoremove dereferences the
freed pathname while comparing rules.
Move the temporary-tree put to audit_rule_change(), the caller that owns
deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both
successful deletion and -ENOENT still release the parser-owned tree.
[PM: dropped unnecessary comment for line length reasons] |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear ce->tgthint in free_tgts()
When free_tgts() frees all structures in ce->tlist, ce->tgthint
is left pointing to one of the freed cache_dfs_tgt structures.
If ce->tgthint is not reset before it is used later, it results
in a use-after-free.
Set ce->tgthint to NULL in free_tgts() after the elements are
freed to reflect that no elements remain. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: serialize security confirmation handling
rfcomm_security_cfm() looks up a session on session_list and then walks
its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown
uses rfcomm_mutex, krfcommd can close and free the same session and DLCs
concurrently:
hci_rx_work krfcommd
----------- ---------
rfcomm_session_get()
rfcomm_lock()
rfcomm_session_close()
rfcomm_dlc_unlink()
rfcomm_session_del()
kfree(s)
rfcomm_unlock()
walk s->dlcs
The callback can then read a freed session list head and touch freed DLCs
while updating their flags or timers.
Serialize the session lookup and DLC traversal in rfcomm_security_cfm()
with rfcomm_mutex. This matches the existing RFCOMM session lifetime
rules and prevents concurrent rfcomm_session_del() / rfcomm_dlc_unlink()
from tearing the objects down while the callback is using them.
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_security_cfm+0x41c/0x440
Read of size 8 at addr ffff888111fb3960 by task kworker/u17:1/89
Workqueue: hci0 hci_rx_work
Call Trace:
rfcomm_security_cfm+0x41c/0x440
hci_encrypt_cfm+0x139/0x590
hci_encrypt_change_evt+0x37b/0xc40
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 69:
rfcomm_session_add+0x9e/0x2f0
rfcomm_run+0x44b/0x41e0
Freed by task 69:
kfree+0x131/0x3c0
rfcomm_session_del+0x188/0x220
rfcomm_run+0x1985/0x41e0 |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: reload header after pskb_may_pull()
mpls_select_multipath() calls mpls_multipath_hash() to choose a nexthop
when an MPLS route has multiple nexthops. While walking the MPLS label
stack, the hash routine caches hdr for the current label. After finding
the bottom-of-stack label, it calls pskb_may_pull() before reading the
inner IP header.
If an skb is constructed with the inner IP header in nonlinear data and
insufficient tailroom in the linear head, pskb_may_pull() calls
pskb_expand_head() to replace the skb head and free the old one. This
leaves hdr pointing to freed memory. The IPv6 path can invalidate hdr
again when it performs a second pull for the larger header.
The issue was found through static analysis. A reproducer sending a legal
Geneve packet through a bareudp/MPLS multipath setup triggered the same
KASAN report in 2 of 2 unpatched runs:
BUG: KASAN: slab-use-after-free in mpls_select_multipath
Read of size 1 at addr ffff88800ecc6e20 by task ksoftirqd/1/23
Call Trace:
mpls_select_multipath
mpls_forward
__netif_receive_skb_list_core
netif_receive_skb_list_internal
napi_complete_done
gro_cell_poll
__napi_poll
net_rx_action
Freed by task 23:
kfree
pskb_expand_head
__pskb_pull_tail
mpls_select_multipath
Reload hdr from the current skb head after each successful pull before
deriving the inner IPv4 or IPv6 header pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix uninitialized local_id in syncookie MP_JOIN reconstruction
mptcp_token_join_cookie_init_state() restores remote_nonce, local_nonce,
backup, join_id, token and msk from the saved cookie entry when rebuilding
the request socket for a MP_JOIN 4th-ACK handled under SYN cookies, but it
does not restore local_id, even though the SYN path saved it.
subflow_ulp_clone() then reads that uninitialized field and stores it as
the joined subflow's address-ID. Because the request-sock slab is
SLAB_TYPESAFE_BY_RCU and not zeroed on allocation, the value is the stale
byte of a previously freed request socket, which an off-path peer can
influence by sending concurrent MP_JOIN SYNs. This corrupts the path
manager's id-based subflow bookkeeping for the connection.
Restore subflow_req->local_id from the cookie entry, as done for the other
fields. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: route to a populated pool in svc_pool_for_cpu()
svc_set_num_threads() spreads the requested threads evenly across the
service's pools (base = nrservs / sv_nrpools). When a service runs
fewer threads than it has pools -- e.g. an nfsd configured with fewer
threads than the host has NUMA nodes while running in "pernode" or
"percpu" mode -- the trailing pools are left with no threads at all.
svc_xprt_enqueue() selects a pool from the CPU servicing the transport,
queues the transport on that pool's sp_xprts, and only wakes a thread
from the same pool. Each thread services exclusively its own pool, so a
transport that lands on a threadless pool is enqueued on sp_xprts and
never picked up: the connection hangs indefinitely.
Have svc_pool_for_cpu() skip pools that currently have no threads,
falling back to the next populated pool. This trades NUMA locality for
a guarantee that the work is actually serviced. sp_nrthreads is only
updated under the service mutex; the lockless read here is a best-effort
routing hint, so annotate it with data_race(). |
