| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: bound check rq_pages index in inline path
svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without
verifying rc_curpage stays within the allocated page array. Add guards
before the first use and after advancing to a new page. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: propagate shared-frag marker through frag-transfer helpers
Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail
to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when
moving frags from source to destination. __pskb_copy_fclone() defers
the rest of the shinfo metadata to skb_copy_header() after copying
frag descriptors, but that helper only carries over gso_{size,segs,
type} and never touches skb_shinfo()->flags; skb_shift() moves frag
descriptors directly and leaves flags untouched. As a result, the
destination skb keeps a reference to the same externally-owned or
page-cache-backed pages while reporting skb_has_shared_frag() as
false.
The mismatch is harmful in any in-place writer that uses
skb_has_shared_frag() to decide whether shared pages must be detoured
through skb_cow_data(). ESP input is one such writer (esp4.c,
esp6.c), and a single nft 'dup to <local>' rule -- or any other
nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d
skb in esp_input() with the marker stripped, letting an unprivileged
user write into the page cache of a root-owned read-only file via
authencesn-ESN stray writes.
Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors
were actually moved from the source. skb_copy() and skb_copy_expand()
share skb_copy_header() too but linearize all paged data into freshly
allocated head storage and emerge with nr_frags == 0, so
skb_has_shared_frag() returns false on its own; they need no change.
The same omission exists in skb_gro_receive() and skb_gro_receive_list().
The former moves the incoming skb's frag descriptors into the
accumulator's last sub-skb via two paths (a direct frag-move loop and
the head_frag + memcpy path); the latter chains the incoming skb whole
onto p's frag_list. Downstream skb_segment() reads only
skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's
shinfo as the nskb -- both p and lp must carry the marker.
The same omission also exists in tcp_clone_payload(), which builds an
MTU probe skb by moving frag descriptors from skbs on sk_write_queue
into a freshly allocated nskb. The helper falls into the same family
and warrants the same fix for consistency; no TCP TX-side in-place
writer is currently known to reach a user page through this gap, but
a future consumer depending on the marker would regress silently.
The same omission exists in skb_segment(): the per-iteration flag
merge takes only head_skb's flag, and the inner switch that rebinds
frag_skb to list_skb on head_skb-frags exhaustion does not fold the
new frag_skb's flag into nskb. Fold frag_skb's flag at both sites
so segments drawing frags from frag_list members carry the marker. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Use sizeof(*hdr) instead of sizeof(hdr) in veventq read
The bound-check in iommufd_veventq_fops_read() for the normal vEVENT
path uses sizeof(hdr) where the surrounding code uses sizeof(*hdr):
if (!vevent_for_lost_events_header(cur) &&
sizeof(hdr) + cur->data_len > count - done) {
hdr is declared as struct iommufd_vevent_header *, so sizeof(hdr)
evaluates to the size of the pointer. Surrounding code uses
sizeof(*hdr) consistently:
if (done >= count || sizeof(*hdr) > count - done) {
...
if (copy_to_user(buf + done, hdr, sizeof(*hdr))) {
...
done += sizeof(*hdr);
struct iommufd_vevent_header is currently 8 bytes (two __u32 fields,
flags and sequence), so on 64-bit (sizeof(void *) == 8) the two
expressions happen to be equal and the check works as intended.
On 32-bit (sizeof(void *) == 4) the check under-counts the header by
4 bytes: a vEVENT whose data_len causes 8 + cur->data_len to exceed
count - done while 4 + cur->data_len does not will pass the check,
then the loop will copy_to_user 8 bytes of header followed by data_len
bytes of payload, writing past the user-supplied buffer.
It is also a latent bug for any future expansion of struct
iommufd_vevent_header beyond sizeof(void *) on 64-bit; the check
should not depend on the type happening to match the host pointer
width.
Use sizeof(*hdr) to match the rest of the function and the actual
amount that will be copied. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPU
flush_hyp_vcpu() copies the host vGIC state into the hyp's private vCPU
on every run. The vGIC list register save and restore use used_lrs as
their loop bound and expect it to stay within the number of implemented
list registers. While this is generally the case, flush_hyp_vcpu()
copies vgic_v3 verbatim and does not enforce this, so a value provided
by the host is used at EL2 to index vgic_lr[] and access ICH_LR<n>_EL2
(host -> EL2).
Fix by clamping used_lrs to the number of implemented list registers
after the copy, as the trusted path already does in
vgic_flush_lr_state(). The number of implemented list registers is
constant after init, so it is replicated once from
kvm_vgic_global_state.nr_lr into hyp_gicv3_nr_lr rather than read on
every entry. |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.
The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: account for fraggap on the paged allocation path
In __ip_append_data(), when the paged-allocation branch is taken,
alloclen and pagedlen are computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap, but the fraggap bytes carried over
from the previous skb are copied into the new skb's linear area at
offset transhdrlen by the subsequent skb_copy_and_csum_bits(). The
linear area is therefore undersized by fraggap bytes while pagedlen is
overstated by the same amount.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix the ACK parser to extract the SACK table for parsing
Fix modification of the received skbuff in rxrpc_input_soft_acks() and a
potential incorrect access of the buffer in a fragmented UDP packet (the
packet would probably have to be deliberately pre-generated as fragmented)
when AF_RXRPC tries to extract the contents of the SACK table by copying
out the contents of the SACK table into a buffer before attempting to parse
AF_RXRPC assumes that it can just call skb_condense() and then validly
access the SACK table from skb->data and that it will be a flat buffer -
but skb_condense() can silently fail to do anything under some
circumstances.
Note that whilst rxrpc_input_soft_acks() should be able to parse extended
ACKs, the rest of AF_RXRPC doesn't currently support that.
Further, there's then no need to call skb_condense() in rxrpc_input_ack(),
so don't. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: require Ethernet MAC header before using eth_hdr()
`ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and
`hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)`
after either assuming that the skb is associated with an Ethernet
device or checking only that the `ETH_HLEN` bytes at
`skb_mac_header(skb)` lie between `skb->head` and `skb->data`.
Make these paths first verify that the skb is associated with an
Ethernet device, that the MAC header was set, and that it spans at
least a full Ethernet header before accessing `eth_hdr(skb)`. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init()
mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When
ib_create_srq() fails for s1, the error branch destroys s0 but falls
through and unconditionally assigns the freed s0 and the ERR_PTR s1 to
devr->s0 and devr->s1.
This leads to several problems: the lock-free fast path checks
"if (devr->s1) return 0;" and treats the ERR_PTR as already initialised;
users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via
to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences
the ERR_PTR and double-frees s0 on teardown.
Fix by adding the same `goto unlock` in the s1 failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/iwcm: Fix workqueue list corruption by removing work_list
The commit e1168f0 ("RDMA/iwcm: Simplify cm_event_handler()")
changed the work submission logic to unconditionally call
queue_work() with the expectation that queue_work() would
have no effect if work was already pending. The problem is
that a free list of struct iwcm_work is used (for which
struct work_struct is embedded), so each call to queue_work()
is basically unique and therefore does indeed queue the work.
This causes a problem in the work handler which walks the work_list
until it's empty to process entries. This means that a single
run of the work handler could process item N+1 and release it
back to the free list while the actual workqueue entry is still
queued. It could then get reused (INIT_WORK...) and lead to
list corruption in the workqueue logic.
Fix this by just removing the work_list. The workqueue already
does this for us.
This fixes the following error that was observed when stress
testing with ucmatose on an Intel E830 in iWARP mode:
[ 151.465780] list_del corruption. next->prev should be ffff9f0915c69c08, but was ffff9f0a1116be08. (next=ffff9f0a15b11c08)
[ 151.466639] ------------[ cut here ]------------
[ 151.466986] kernel BUG at lib/list_debug.c:67!
[ 151.467349] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 151.467753] CPU: 14 UID: 0 PID: 2306 Comm: kworker/u64:18 Not tainted 6.19.0-rc4+ #1 PREEMPT(voluntary)
[ 151.468466] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 151.469192] Workqueue: 0x0 (iw_cm_wq)
[ 151.469478] RIP: 0010:__list_del_entry_valid_or_report+0xf0/0x100
[ 151.469942] Code: c7 58 5f 4c b2 e8 10 50 aa ff 0f 0b 48 89 ef e8 36 57 cb ff 48 8b 55 08 48 89 e9 48 89 de 48 c7 c7 a8 5f 4c b2 e8 f0 4f aa ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90
[ 151.471323] RSP: 0000:ffffb15644e7bd68 EFLAGS: 00010046
[ 151.471712] RAX: 000000000000006d RBX: ffff9f0915c69c08 RCX: 0000000000000027
[ 151.472243] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f0a37d9c600
[ 151.472768] RBP: ffff9f0a15b11c08 R08: 0000000000000000 R09: c0000000ffff7fff
[ 151.473294] R10: 0000000000000001 R11: ffffb15644e7bba8 R12: ffff9f092339ee68
[ 151.473817] R13: ffff9f0900059c28 R14: ffff9f092339ee78 R15: 0000000000000000
[ 151.474344] FS: 0000000000000000(0000) GS:ffff9f0a847b5000(0000) knlGS:0000000000000000
[ 151.474934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 151.475362] CR2: 0000559e233a9088 CR3: 000000020296b004 CR4: 0000000000770ef0
[ 151.475895] PKRU: 55555554
[ 151.476118] Call Trace:
[ 151.476331] <TASK>
[ 151.476497] move_linked_works+0x49/0xa0
[ 151.476792] __pwq_activate_work.isra.46+0x2f/0xa0
[ 151.477151] pwq_dec_nr_in_flight+0x1e0/0x2f0
[ 151.477479] process_scheduled_works+0x1c8/0x410
[ 151.477823] worker_thread+0x125/0x260
[ 151.478108] ? __pfx_worker_thread+0x10/0x10
[ 151.478430] kthread+0xfe/0x240
[ 151.478671] ? __pfx_kthread+0x10/0x10
[ 151.478955] ? __pfx_kthread+0x10/0x10
[ 151.479240] ret_from_fork+0x208/0x270
[ 151.479523] ? __pfx_kthread+0x10/0x10
[ 151.479806] ret_from_fork_asm+0x1a/0x30
[ 151.480103] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net/tcp-md5: Fix MAC comparison to be constant-time
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix potential overflow of shmem scatterlist length
When a scatterlists table of a GEM shmem object of size 4 GB or more is
populated with pages allocated from a folio, unsigned int .length
attribute of a scatterlist may get overflowed if total byte length of
pages allocated to that single scatterlist happens to reach or cross the
4GB limit. As a consequence, users of the object may suffer from hitting
unexpected, premature end of the object's backing pages.
[278.780187] ------------[ cut here ]------------
[278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915]
...
[278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary)
[278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
[278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024
[278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915]
...
[278.780786] Call Trace:
[278.780787] <TASK>
[278.780788] ? __apply_to_page_range+0x3e6/0x910
[278.780795] ? __pfx_remap_sg+0x10/0x10 [i915]
[278.780906] apply_to_page_range+0x14/0x30
[278.780908] remap_io_sg+0x14d/0x260 [i915]
[278.781013] vm_fault_cpu+0xd2/0x330 [i915]
[278.781137] __do_fault+0x3a/0x1b0
[278.781140] do_fault+0x322/0x640
[278.781143] __handle_mm_fault+0x938/0xfd0
[278.781150] handle_mm_fault+0x12c/0x300
[278.781152] ? lock_mm_and_find_vma+0x4b/0x760
[278.781155] do_user_addr_fault+0x2d6/0x8e0
[278.781160] exc_page_fault+0x96/0x2c0
[278.781165] asm_exc_page_fault+0x27/0x30
...
That issue was apprehended by the author of a change that introduced it,
and potential risk even annotated with a comment, but then never addressed.
When adding folio pages to a scatterlist table, take care of byte length
of any single scatterlist not exceeding max_segment.
(cherry picked from commit 06249b4e691a75694c014a61708c007fb5755f60) |
| In the Linux kernel, the following vulnerability has been resolved:
net/ipv6: ioam6: prevent schema length wraparound in trace fill
ioam6_fill_trace_data() stores the schema contribution to the trace
length in a u8. With bit 22 enabled and the largest schema payload,
sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the
remaining-space check. __ioam6_fill_trace_data() then positions the
write cursor without reserving the schema area but still copies the
4-byte schema header and the full schema payload, overrunning the trace
buffer.
Keep sclen in an unsigned int so the remaining-space check and the write
cursor calculation both see the full schema length. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Wait for RCU readers during policy netns exit
xfrm_policy_fini() frees the policy_bydst hash tables after flushing the
policy work items and deleting all policies, but it does not wait for
concurrent RCU readers to leave their read-side critical sections first.
The policy_bydst tables are published via rcu_assign_pointer() and are
looked up through rcu_dereference_check(), so netns teardown must also
wait for an RCU grace period before freeing the table memory.
Fix this by adding synchronize_rcu() before freeing the policy hash tables. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: ensure names are nul-terminated
Reject names that lack a \0 character before feeding them
to functions that expect c-strings.
Fixes tag is the most recent commit that needs this change. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: reject oversized global TT response buffers
batadv_tt_prepare_tvlv_global_data() builds the allocation length for a
global TT response in 16-bit temporaries. When a remote originator
advertises a large enough global TT, the TT payload length plus the VLAN
header offset can exceed 65535 and wrap before kmalloc().
The full-table response path still uses the original TT payload length when
it fills tt_change, so the wrapped allocation is too small and
batadv_tt_prepare_tvlv_global_data() writes past the end of the heap object
before the later packet-size check runs.
Fix this by rejecting TT responses whose TVLV value length cannot fit in
the 16-bit TVLV payload length field. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: replace hardcoded hdr2_len with offsetof() in smb2_calc_max_out_buf_len()
After this commit (e2b76ab8b5c9 "ksmbd: add support for read compound"),
response buffer management was changed to use dynamic iov array.
In the new design, smb2_calc_max_out_buf_len() expects the second
argument (hdr2_len) to be the offset of ->Buffer field in the
response structure, not a hardcoded magic number.
Fix the remaining call sites to use the correct offsetof() value. |
| This issue was addressed with improved state management. This issue is fixed in macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.1. An app may be able to access sensitive user data. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: split cached_fid bitfields to avoid shared-byte RMW races
is_open, has_lease and on_list are stored in the same bitfield byte in
struct cached_fid but are updated in different code paths that may run
concurrently. Bitfield assignments generate byte read–modify–write
operations (e.g. `orb $mask, addr` on x86_64), so updating one flag can
restore stale values of the others.
A possible interleaving is:
CPU1: load old byte (has_lease=1, on_list=1)
CPU2: clear both flags (store 0)
CPU1: RMW store (old | IS_OPEN) -> reintroduces cleared bits
To avoid this class of races, convert these flags to separate bool
fields. |
