| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in 78 xiaozhi-esp32 up to 2.2.6. Affected by this issue is the function ParseMessage of the file main/mcp_server.cc of the component MCP Response Handler. This manipulation causes improper synchronization. Remote exploitation of the attack is possible. The attack's complexity is rated as high. The exploitation is known to be difficult. The exploit has been made available to the public and could be used for attacks. The pull request to fix this issue awaits acceptance. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow()
There are code paths from which the function is called without holding
the RCU read lock, resulting in a suspicious RCU usage warning [1].
Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire
the RCU read lock before calling
l3mdev_master_upper_ifindex_by_index_rcu().
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/361:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0xba/0x110
lockdep_rcu_suspicious.cold+0x4f/0xd6
dev_get_by_index_rcu+0x1d3/0x210
l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0
ip_tunnel_bind_dev+0x72f/0xa00
ip_tunnel_newlink+0x368/0x7a0
ipgre_newlink+0x14c/0x170
__rtnl_newlink+0x1173/0x19c0
rtnl_newlink+0x6c/0xa0
rtnetlink_rcv_msg+0x3cc/0xf60
netlink_rcv_skb+0x171/0x450
netlink_unicast+0x539/0x7f0
netlink_sendmsg+0x8c1/0xd80
____sys_sendmsg+0x8f9/0xc20
___sys_sendmsg+0x197/0x1e0
__sys_sendmsg+0x122/0x1f0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| Axios is a promise based HTTP client for the browser and Node.js. Starting in version 1.13.0 and prior to 1.13.2, Axios HTTP/2 session cleanup logic contains a state corruption bug that allows a malicious server to crash the client process through concurrent session closures. The vulnerability exists in the Http2Sessions.getSession() method in lib/adapters/http.js. The session cleanup logic contains a control flow error when removing sessions from the sessions array. This vulnerability is fixed in 1.13.2. |
| Multiple race conditions in fs/pipe.c in the Linux kernel before 2.6.32-rc6 allow local users to cause a denial of service (NULL pointer dereference and system crash) or gain privileges by attempting to open an anonymous pipe via a /proc/*/fd/ pathname. |
| The inotify functionality in Linux kernel 2.6 before 2.6.28-rc5 might allow local users to gain privileges via unknown vectors related to race conditions in inotify watch removal and umount. |
| The nfs4_proc_lock function in fs/nfs/nfs4proc.c in the NFSv4 client in the Linux kernel before 2.6.31-rc4 allows remote NFS servers to cause a denial of service (NULL pointer dereference and panic) by sending a certain response containing incorrect file attributes, which trigger attempted use of an open file that lacks NFSv4 state. |
| OliveTin gives access to predefined shell commands from a web interface. Prior to version 3000.10.3, an unauthenticated denial-of-service vulnerability exists in OliveTin’s OAuth2 login flow. Concurrent requests to /oauth/login can trigger unsynchronized access to a shared registeredStates map, causing a Go runtime panic (fatal error: concurrent map writes) and process termination. This allows remote attackers to crash the service when OAuth2 is enabled. This issue has been patched in version 3000.10.3. |
| Improper synchronization in the firmware for some Intel(R) TDX may allow a privileged user to potentially enable escalation of privilege via local access. |
| A bug in QEMU could cause a guest I/O operation otherwise addressed to an arbitrary disk offset to be targeted to offset 0 instead (potentially overwriting the VM's boot code). This could be used, for example, by L2 guests with a virtual disk (vdiskL2) stored on a virtual disk of an L1 (vdiskL1) hypervisor to read and/or write data to LBA 0 of vdiskL1, potentially gaining control of L1 at its next reboot. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
Stuart Hayhurst has found that both at bootup and fullscreen VA-API video
is leading to black screens for around 1 second and kernel WARNING [1] traces
when calling dmub_psr_enable() with Parade 08-01 TCON.
These symptoms all go away with PSR-SU disabled for this TCON, so disable
it for now while DMUB traces [2] from the failure can be analyzed and the failure
state properly root caused.
(cherry picked from commit afb634a6823d8d9db23c5fb04f79c5549349628b) |
| In the Linux kernel, the following vulnerability has been resolved:
perf/aux: Fix AUX buffer serialization
Ole reported that event->mmap_mutex is strictly insufficient to
serialize the AUX buffer, add a per RB mutex to fully serialize it.
Note that in the lock order comment the perf_event::mmap_mutex order
was already wrong, that is, it nesting under mmap_lock is not new with
this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix warnings during S3 suspend
The enable_gpe_wakeup() function calls acpi_enable_all_wakeup_gpes(),
and the later one may call the preempt_schedule_common() function,
resulting in a thread switch and causing the CPU to be in an interrupt
enabled state after the enable_gpe_wakeup() function returns, leading
to the warnings as follow.
[ C0] WARNING: ... at kernel/time/timekeeping.c:845 ktime_get+0xbc/0xc8
[ C0] ...
[ C0] Call Trace:
[ C0] [<90000000002243b4>] show_stack+0x64/0x188
[ C0] [<900000000164673c>] dump_stack_lvl+0x60/0x88
[ C0] [<90000000002687e4>] __warn+0x8c/0x148
[ C0] [<90000000015e9978>] report_bug+0x1c0/0x2b0
[ C0] [<90000000016478e4>] do_bp+0x204/0x3b8
[ C0] [<90000000025b1924>] exception_handlers+0x1924/0x10000
[ C0] [<9000000000343bbc>] ktime_get+0xbc/0xc8
[ C0] [<9000000000354c08>] tick_sched_timer+0x30/0xb0
[ C0] [<90000000003408e0>] __hrtimer_run_queues+0x160/0x378
[ C0] [<9000000000341f14>] hrtimer_interrupt+0x144/0x388
[ C0] [<9000000000228348>] constant_timer_interrupt+0x38/0x48
[ C0] [<90000000002feba4>] __handle_irq_event_percpu+0x64/0x1e8
[ C0] [<90000000002fed48>] handle_irq_event_percpu+0x20/0x80
[ C0] [<9000000000306b9c>] handle_percpu_irq+0x5c/0x98
[ C0] [<90000000002fd4a0>] generic_handle_domain_irq+0x30/0x48
[ C0] [<9000000000d0c7b0>] handle_cpu_irq+0x70/0xa8
[ C0] [<9000000001646b30>] handle_loongarch_irq+0x30/0x48
[ C0] [<9000000001646bc8>] do_vint+0x80/0xe0
[ C0] [<90000000002aea1c>] finish_task_switch.isra.0+0x8c/0x2a8
[ C0] [<900000000164e34c>] __schedule+0x314/0xa48
[ C0] [<900000000164ead8>] schedule+0x58/0xf0
[ C0] [<9000000000294a2c>] worker_thread+0x224/0x498
[ C0] [<900000000029d2f0>] kthread+0xf8/0x108
[ C0] [<9000000000221f28>] ret_from_kernel_thread+0xc/0xa4
[ C0]
[ C0] ---[ end trace 0000000000000000 ]---
The root cause is acpi_enable_all_wakeup_gpes() uses a mutex to protect
acpi_hw_enable_all_wakeup_gpes(), and acpi_ut_acquire_mutex() may cause
a thread switch. Since there is no longer concurrent execution during
loongarch_acpi_suspend(), we can call acpi_hw_enable_all_wakeup_gpes()
directly in enable_gpe_wakeup().
The solution is similar to commit 22db06337f590d01 ("ACPI: sleep: Avoid
breaking S3 wakeup due to might_sleep()"). |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
The udelay(5) is not enough, sometimes below kernel panic
still be triggered:
[ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1
[ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT)
[ 4.012985] Call trace:
[...]
[ 4.013029] arm64_serror_panic+0x64/0x70
[ 4.013034] do_serror+0x3c/0x70
[ 4.013039] el1h_64_error_handler+0x30/0x54
[ 4.013046] el1h_64_error+0x64/0x68
[ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48
[ 4.013059] __genpd_runtime_resume+0x30/0x80
[ 4.013066] genpd_runtime_resume+0x114/0x29c
[ 4.013073] __rpm_callback+0x48/0x1e0
[ 4.013079] rpm_callback+0x68/0x80
[ 4.013084] rpm_resume+0x3bc/0x6a0
[ 4.013089] __pm_runtime_resume+0x50/0x9c
[ 4.013095] pm_runtime_get_suppliers+0x60/0x8c
[ 4.013101] __driver_probe_device+0x4c/0x14c
[ 4.013108] driver_probe_device+0x3c/0x120
[ 4.013114] __driver_attach+0xc4/0x200
[ 4.013119] bus_for_each_dev+0x7c/0xe0
[ 4.013125] driver_attach+0x24/0x30
[ 4.013130] bus_add_driver+0x110/0x240
[ 4.013135] driver_register+0x68/0x124
[ 4.013142] __platform_driver_register+0x24/0x30
[ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma]
[ 4.013163] do_one_initcall+0x60/0x1e0
[ 4.013168] do_init_module+0x5c/0x21c
[ 4.013175] load_module+0x1a98/0x205c
[ 4.013181] init_module_from_file+0x88/0xd4
[ 4.013187] __arm64_sys_finit_module+0x258/0x350
[ 4.013194] invoke_syscall.constprop.0+0x50/0xe0
[ 4.013202] do_el0_svc+0xa8/0xe0
[ 4.013208] el0_svc+0x3c/0x140
[ 4.013215] el0t_64_sync_handler+0x120/0x12c
[ 4.013222] el0t_64_sync+0x190/0x194
[ 4.013228] SMP: stopping secondary CPUs
The correct way is to wait handshake, but it needs BUS clock of
BLK-CTL be enabled, which is in separate driver. So delay is the
only option here. The udelay(10) is a data got by experiment. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Restructure trace_clock_global() to never block
It was reported that a fix to the ring buffer recursion detection would
cause a hung machine when performing suspend / resume testing. The
following backtrace was extracted from debugging that case:
Call Trace:
trace_clock_global+0x91/0xa0
__rb_reserve_next+0x237/0x460
ring_buffer_lock_reserve+0x12a/0x3f0
trace_buffer_lock_reserve+0x10/0x50
__trace_graph_return+0x1f/0x80
trace_graph_return+0xb7/0xf0
? trace_clock_global+0x91/0xa0
ftrace_return_to_handler+0x8b/0xf0
? pv_hash+0xa0/0xa0
return_to_handler+0x15/0x30
? ftrace_graph_caller+0xa0/0xa0
? trace_clock_global+0x91/0xa0
? __rb_reserve_next+0x237/0x460
? ring_buffer_lock_reserve+0x12a/0x3f0
? trace_event_buffer_lock_reserve+0x3c/0x120
? trace_event_buffer_reserve+0x6b/0xc0
? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0
? dpm_run_callback+0x3b/0xc0
? pm_ops_is_empty+0x50/0x50
? platform_get_irq_byname_optional+0x90/0x90
? trace_device_pm_callback_start+0x82/0xd0
? dpm_run_callback+0x49/0xc0
With the following RIP:
RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200
Since the fix to the recursion detection would allow a single recursion to
happen while tracing, this lead to the trace_clock_global() taking a spin
lock and then trying to take it again:
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* lock taken */
(something else gets traced by function graph tracer)
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* DEAD LOCK! */
Tracing should *never* block, as it can lead to strange lockups like the
above.
Restructure the trace_clock_global() code to instead of simply taking a
lock to update the recorded "prev_time" simply use it, as two events
happening on two different CPUs that calls this at the same time, really
doesn't matter which one goes first. Use a trylock to grab the lock for
updating the prev_time, and if it fails, simply try again the next time.
If it failed to be taken, that means something else is already updating
it.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761 |
| In vcu, there is a possible use after free due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07203410; Issue ID: ALPS07203410. |
| In vcu, there is a possible use after free due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS07203476; Issue ID: ALPS07203476. |
| A DMA reentrancy issue was found in the Tulip device emulation in QEMU. When Tulip reads or writes to the rx/tx descriptor or copies the rx/tx frame, it doesn't check whether the destination address is its own MMIO address. This can cause the device to trigger MMIO handlers multiple times, possibly leading to a stack or heap overflow. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition. |
| udp.c in the Linux kernel before 4.5 allows remote attackers to execute arbitrary code via UDP traffic that triggers an unsafe second checksum calculation during execution of a recv system call with the MSG_PEEK flag. |
| An issue was discovered in Mitsubishi Electric Automation MELSEC-Q series Ethernet interface modules QJ71E71-100, all versions, QJ71E71-B5, all versions, and QJ71E71-B2, all versions. The affected Ethernet interface module is connected to a MELSEC-Q PLC, which may allow a remote attacker to connect to the PLC via Port 5002/TCP and cause a denial of service, requiring the PLC to be reset to resume operation. This is caused by an Unrestricted Externally Accessible Lock. |
| Race condition in the mod_status module in the Apache HTTP Server before 2.4.10 allows remote attackers to cause a denial of service (heap-based buffer overflow), or possibly obtain sensitive credential information or execute arbitrary code, via a crafted request that triggers improper scoreboard handling within the status_handler function in modules/generators/mod_status.c and the lua_ap_scoreboard_worker function in modules/lua/lua_request.c. |
