| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 IBM TS4500 Tape Library/Diamondback Tape Library does not invalidate session which could allow an authenticated user to impersonate another user on the system. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: unregister net_devices in case of probe failure
If register_netdev() fails for one of the MTK_MAX_DEVS devices in
mtk_probe(), the error path jumps to err_deinit_ppe, skipping
mtk_unreg_dev(). The previously registered net_devices are then freed by
mtk_free_dev() while still in NETREG_REGISTERED state, hitting the
BUG_ON(dev->reg_state != NETREG_UNREGISTERED).
Route the register_netdev() failure to err_unreg_netdev so the net_devices
registered so far are properly unregistered before being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: don't WARN on benign flow_offload_alloc() failure
flow_offload_alloc() returns NULL when the conntrack entry is dying
(e.g. raced with a conntrack flush) or when the GFP_ATOMIC allocation
fails; both are expected under load and neither is a kernel bug. This
path runs from softirq on every committed packet, so with
panic_on_warn=1 an unprivileged user can panic the box just by racing
a conntrack flush against a `tc ... action ct commit` classifier.
Reproduced with a custom repro under QEMU: a small, fixed set of UDP
flows through `tc filter ... action ct commit` on lo, raced against
threads flooding bare ctnetlink CT_DELETE (flush) requests. Hits
WARNING: net/sched/act_ct.c:437 (tcf_ct_flow_table_add(), inlined
into tcf_ct_act() in this build) within ~15s on the unpatched kernel;
same setup is clean on the patched kernel. The fix itself is
behavior-preserving: both branches already did `goto err_alloc`
before and after, only the WARN is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Validate the SVE vector length in pkvm_vcpu_init_sve()
pkvm_vcpu_init_sve() clamps only the upper bound of the host-provided
sve_max_vl, so an invalid vector length reaches sve_state_size_from_vl()
and the WARN_ON() there, which is fatal at EL2. The existing
!sve_state_size test rejects such a length, but only after the macro has
run.
Check sve_vl_valid() before deriving the state size. A valid length
cannot yield a zero size, so the !sve_state_size test goes with it. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.2.0, Svc::Ccsds::SpacePacketDeframer dataIn_handler is vulnerable because the handler treats the minimum packet-length condition as FW_ASSERT rather than rejecting and returning the buffer. When a CCSDS telecommand frame leaves a payload of six bytes or fewer after TcDeframer removes its header and trailer, the assertion aborts or resets the flight-software process, causing denial of service. This issue is fixed in version 4.2.0. |
| A Reachable Assertion vulnerability in the
l2ald
daemon of Juniper Networks Junos OS and Junos OS Evolved devices configured for MC-LAG/ICCP allows an adjacent attacker to cause a denial of service via an inconsistent ICCP peer message. |
| A Reachable Assertion vulnerability in the srxpfe process of Juniper Networks Junos OS on SRX Series allows an adjacent network attacker to cause a denial of service of the data plane via malformed firewall-authentication synchronization traffic on chassis-cluster fabric interfaces. |
| UNSUPPORTED WHEN ASSIGNED Improper restriction of XML external entity references in Apache Abdera allows an attacker to access sensitive data or make server-side requests when an application parses attacker-controlled XML with Abdera.
This issue affects Apache Abdera: all versions.
Apache Abdera is retired and no longer supported, so we do not plan to release a version that fixes this issue. Users are recommended to migrate to a maintained alternative. Applications that cannot migrate should ensure that untrusted XML cannot reach the affected Abdera parser or JDBC adapter parsing paths. Actively maintained downstream products may still be impacted if they include an affected Abdera artifact.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| Wasmtime before 24.0.13, 25.0.0 before 36.0.14, 37.0.0 before 46.0.3, and 47.0.0 before 47.0.4 allows a filesystem sandbox escape in wasmtime-wasi because its cap-std dependency mishandles symlinks with trailing slashes on macOS and Linux kernels lacking openat2. A guest with write access to any sandboxed directory can read and write any host-accessible file, and read-only guests may read host files via preexisting symlinks. |
| OpenBao before 2.6.4 and 2.7.x before 2.7.1 does not check Secret ID expiration at use in the AppRole auth method, leaving expired Secret IDs valid until the periodic tidy removes them. An attacker holding an expired, untidied Secret ID can log in and gain access beyond its TTL. |
| OpenBao before 2.6.4 and 2.7.x before 2.7.1 does not verify, when renewing a token issued by the Kubernetes Auth method, that the service account token originally used to authenticate is still valid. An authenticated attacker can keep renewing such tokens to persist access after the Kubernetes service account has been deleted. |
| Supabase Realtime provides Broadcast, Presence, and Postgres Changes via WebSockets. Prior to version 2.103.1, the REST broadcast endpoints accept an expired JWT when the exp claim is encoded as a JSON string instead of a JSON number. The same route rejects an expired integer exp token signed with the same tenant secret. The accepted request returns 202 and emits the broadcast to subscribers. This could allow an unauthenticated attacker can broadcast realtime messages to subscribers. The attack can be performed via the Internet/only from within the supabase project. The impact of broadcasting messages to subscribers is application specific. This issue has been patched in version 2.103.1. |
| PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. Prior to 1.30.7, 2.1.19, 2.4.8, 3.10.8, and 5.10.0, XmlScanner::scan in src/PhpSpreadsheet/Reader/Security/XmlScanner.php uses a DOCTYPE detection pattern that accounts for NUL-byte interleaving but not ISO-2022 escape sequences in XLSX XML parts. The escape sequences prevent the scanner from matching the declaration, and XML charset normalization then removes the escape bytes before parsing, exposing a valid DOCTYPE and entity definitions. Processing an attacker-controlled XLSX can therefore cause entity-expansion denial of service on supported PHP versions and can permit local file access or SSRF on PHP before 8.0 or when LIBXML_NOENT is enabled. This issue is fixed in versions 1.30.7, 2.1.19, 2.4.8, 3.10.8, and 5.10.0. |
| PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. From 3.3.0 until 3.10.8 and 5.10.0, Reader\Xml passes stored SpreadsheetML XML through XmlScanner::scan in Xml::canRead and Xml::trySimpleXMLLoadStringPrivate, while Xml::unentity decodes numeric entities only after each DOCTYPE pattern check. A double-encoded less-than character is reduced by the first callback to another encoded character and by the second callback to a literal less-than sign, so SimpleXML receives an unchecked DOCTYPE and entity declaration. Processing attacker-controlled SpreadsheetML XML can cause entity-expansion denial of service and can permit local file access or SSRF on PHP before 8.0 or when LIBXML_NOENT is enabled. This issue is fixed in versions 3.10.8 and 5.10.0. |
| Missing security attributes on sensitive cookies in KNIME Business Hub before version 1.19.0 allow an unauthenticated remote attacker to compromise user sessions if other security issues such as a cross-site scripting vulnerability or a man-in-the-middle attack are present. A workaround is not possible. |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Security: Encryption). Supported versions that are affected are MySQL Server: 26.7.0-26.7.1; MySQL Cluster: 26.7.0-26.7.1. Easily exploitable vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server, MySQL Cluster. CVSS 3.1 Base Score 4.9 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H). |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-32, delegate symlink cleanup does not check the MAGICK_SHRED_PASSES environment variable, allowing a local privileged workflow to overwrite a file with random data. This issue is fixed in version 7.1.2-32. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JDBC). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| The Redis server command parser in Apache bRPC accepts an empty RESP array as a command header. A remote unauthenticated attacker who can reach a bRPC server with Redis service enabled can send an empty array header followed by a bulk string, causing an out-of-bounds write in the parser and crashing the process.
Root Cause:
RedisCommandParser::ConsumeImpl rejected negative RESP array counts but accepted zero. It resized the command argument vector to zero elements and continued parsing. When a following bulk string was parsed, the only index guard was a CHECK. In configurations where fatal logs do not abort immediately, execution could continue and write to _args[0] even though the vector was empty.
Affected Scenarios:
Deployments that enable ServerOptions.redis_service and accept Redis protocol traffic from untrusted clients. The issue is reached during parsing before command handling or authentication.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3354
Note:
The fix rejects empty RESP arrays as invalid Redis commands and replaces the internal index CHECK with an explicit parse error so malformed command streams cannot fall through to an indexed vector write. |
| A reachable-assertion flaw in the HPACK header-compression decoder of the HTTP/2 (h2/gRPC) stack in Apache bRPC (version < 1.18.0) on all platforms allows a remote attacker to crash the server process by sending a crafted sequence of HPACK headers, resulting in a denial of service.
Root Cause:
In src/brpc/details/hpack.cpp, IndexTable::Init sizes the dynamic-table ring buffer as num_headers = max_size / (32 + 2), i.e. it assumes a minimum table entry of 34 bytes (name >= 1 byte + value >= 1 byte + 32 bytes of overhead). However, RFC 7541 section 4.1 specifies that the minimum entry size is 33 bytes, because the value may be empty (name >= 1 byte + value == 0 + 32 bytes). For the default 4096-byte table this allocates only 120 slots (4096/34). Eviction in AddHeader is driven by byte usage (_max_size), not by slot count, so a peer can add 121 minimal 33-byte entries (121*33 = 3993 <= 4096) without triggering eviction. The 121st AddHeader then hits CHECK(!_header_queue.full()), which aborts the process.
Affected Scenarios:
Use a bRPC server that serves HTTP/2 or gRPC requests (e.g. via the h2 protocol) from an untrusted network. The malicious header block is processed during HPACK decoding of incoming requests without authentication.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3462
Note:
The fix sizes the dynamic table for the 33-byte minimum entry (max_size / (32 + 1)) and ensures at least one ring-buffer slot is kept when max_size is smaller than the minimum entry, so that initialization cannot fail on malloc(0). |
