| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: defer node table free until after RCU readers
HSR node-list and node-status generic-netlink operations run under
rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and
hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table
with plain list_del() and frees each node immediately.
That lets a generic-netlink reader hold a struct hsr_node pointer across
hsr_dellink(). In a KASAN build, widening the reader window after
hsr_get_next_node() obtains the node reproduces a slab-use-after-free
when the reader copies node->macaddress_A; the freeing stack is
hsr_del_nodes() from hsr_dellink().
Use list_del_rcu() and defer the free through the existing
hsr_free_node_rcu() callback. This matches the lifetime rule used by the
HSR prune paths, which already delete nodes with list_del_rcu() and
call_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: fix use-after-free in VEPA multicast source pruning
ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's
own address (VEPA multicast workaround) by freeing the skb and
continuing to the next descriptor:
dev_kfree_skb_irq(skb);
continue;
The skb pointer is declared outside the while loop and persists across
iterations. Because the continue skips the "skb = NULL" reset at the
bottom of the loop, the next iteration enters the "else if (skb)" path
and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing
skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context.
The sibling driver iavf already handles this correctly by nulling the
pointer before continuing. Apply the same pattern here.
I do not have ixgbevf hardware; the bug was found by static analysis
(scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool
corroboration with the highest score in the scan). The UAF was confirmed
under KASAN by loading a test module that reproduces the exact code
pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags):
BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000
Read of size 8 at addr 000000006163ae78 by task insmod/30
freed 208-byte region [000000006163adc0, 000000006163ae90)
QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF
driver does not include the VEPA source pruning path, so a full
end-to-end reproduction with emulated hardware was not possible. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mcast: Fix a possible use-after-free when removing a bridge port
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: pop cached request if it is usable
When submitting a bio to blk-mq, if the task should sleep after peeking
a cached request, but before it pops it, the plug flushes and calls
blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a
use-after-free bug. Fix this by popping the cached request before any
possible blocking calls if it is suitable for use.
Popping this request first holds a queue reference, so avoid any
serialization races with queue freezes and can safely proceed with
dispatching that request to the driver. This potentially increases a
timing window from when a driver wants to freeze its queue to when
requests stop being dispatched. That scenario is off the fast path
though, and drivers need to appropriately handle requests during a
freeze request anyway.
The downside is the popped element needs to be individually freed when
we performed a bio plug merge. The cached request would have had to be
freed later anyway, but this patch does it inline with building the plug
list instead of after flushing it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: refresh tcphdr after skb_ensure_writable
synproxy_tstamp_adjust() rewrites the TCP timestamp option in place
and then patches the TCP checksum via inet_proto_csum_replace4() on
the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and
ipv6_synproxy_hook() obtain that pointer with skb_header_pointer()
before calling in, so it may either alias skb->head directly or
point at the caller's on-stack _tcph buffer.
Between obtaining the pointer and using it, the function calls
skb_ensure_writable(skb, optend), which on a cloned or non-linear
skb invokes pskb_expand_head() and frees the old skb->head. After
that point the cached th is stale:
caller (ipv[46]_synproxy_hook)
th = skb_header_pointer(skb, ..., &_tcph)
synproxy_tstamp_adjust(skb, protoff, th, ...)
skb_ensure_writable(skb, optend)
pskb_expand_head() /* kfree(old skb->head) */
...
inet_proto_csum_replace4(&th->check, ...)
/* writes into freed head, or
into the caller's stack copy
leaving the on-wire checksum
stale */
The option bytes are written through skb->data and are fine; only
the checksum update goes through th and so lands in the wrong
place. The result is either a write into freed slab memory or a
packet leaving with a checksum that does not match its payload.
Fix by re-deriving th from skb->data + protoff immediately after
skb_ensure_writable() succeeds, so the subsequent checksum update
targets the linear, writable header. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table()
ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports
too soon.
Only after unregister_net_sysctl_table() we can be sure no threads can possibly
use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]()
Sashiko found that iptunnel_pmtud_build_icmp() and
iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr()
before an skb_cow() call which can reallocate skb->head.
Fix this possible UAF by initializing the local variables
after the skb_cow() call.
Remove skb_reset_network_header() calls which were not needed. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu()
skb_tunnel_check_pmtu() can change skb->head.
Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF.
Use instead ip_hdr(skb) as done in drivers/net/bareudp.c
and drivers/net/geneve.c.
Found by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix slab-use-after-free Read in tipc_aead_decrypt_done
tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to
crypto_aead_decrypt(req) without taking a reference on the netns, unlike
the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously
(e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs
tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the
meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the
per-netns tipc_crypto, and the completion then reads it:
tipc_aead_decrypt_done() dereferences aead->crypto->stats and
aead->crypto->net, and tipc_crypto_rcv_complete() dereferences
aead->crypto->aead[] and the node table -- reading freed memory.
Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO):
BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999)
Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51
Workqueue: events_unbound
Call Trace:
tipc_aead_decrypt_done (net/tipc/crypto.c:999)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 169:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
tipc_crypto_start (net/tipc/crypto.c:1502)
tipc_init_net (net/tipc/core.c:72)
ops_init (net/core/net_namespace.c:137)
setup_net (net/core/net_namespace.c:446)
copy_net_ns (net/core/net_namespace.c:579)
create_new_namespaces (kernel/nsproxy.c:132)
__x64_sys_unshare (kernel/fork.c:3316)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Freed by task 8:
kfree (mm/slub.c:6566)
tipc_exit_net (net/tipc/core.c:119)
cleanup_net (net/core/net_namespace.c:704)
process_one_work (kernel/workqueue.c:3314)
kthread (kernel/kthread.c:436)
This is the same class of bug that commit e279024617134 ("net/tipc: fix
slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt
side. The encrypt path takes maybe_get_net(aead->crypto->net) before
crypto_aead_encrypt() and drops it with put_net() on the synchronous
return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY
return keeps the reference for the async callback to release. The decrypt
path was left without the equivalent guard.
Mirror the encrypt-side fix on the decrypt path: take a net reference
before crypto_aead_decrypt() (failing with -ENODEV and the matching
bearer put if it cannot be acquired), keep it across the
-EINPROGRESS/-EBUSY async return, and drop it with put_net() on the
synchronous success/error return and at the end of
tipc_aead_decrypt_done().
Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is
flooded with crafted encrypted frames from an unknown peer (driving the
cluster-key decrypt path) while the bearer's netns is repeatedly torn
down. The completion must run asynchronously to outlive
tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts
synchronously, so the async path was exercised via cryptd offload. The
unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the
unpatched upstream path; tipc_aead_decrypt() still lacks
maybe_get_net(aead->crypto->net), so the completion can outlive the free
on any config where crypto_aead_decrypt() goes async.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: re-lock request before replacing page cache folio
fuse_try_move_folio() unlocks the request on entry but does not
re-lock it on the success path. This means fuse_chan_abort() can end the
request and free the fuse_io_args (eg fuse_readpages_end()) while the
subsequent copy chain logic after fuse_try_move_folio() accesses the
fuse_io_args, leading to use-after-free issues.
Fix this by calling lock_request() before replace_page_cache_folio().
This ensures the request is locked on the success path which will
prevent the fuse_io_args from being freed while the later copying logic
runs, and also ensures that the ap->folios[i]->mapping is never null
since ap->folios[i] will always point to the newfolio after
replace_page_cache_folio(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix mm lifecycle in open-coded task_vma iterator
The open-coded task_vma iterator reads task->mm locklessly and acquires
mmap_read_trylock() but never calls mmget(). If the task exits
concurrently, the mm_struct can be freed as it is not
SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free.
Safely read task->mm with a trylock on alloc_lock and acquire an mm
reference. Drop the reference via bpf_iter_mmput_async() in _destroy()
and error paths. bpf_iter_mmput_async() is a local wrapper around
mmput_async() with a fallback to mmput() on !CONFIG_MMU.
Reject irqs-disabled contexts (including NMI) up front. Operations used
by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async)
take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from
NMI or from a tracepoint that fires with those locks held could
deadlock.
A trylock on alloc_lock is used instead of the blocking task_lock()
(get_task_mm) to avoid a deadlock when a softirq BPF program iterates
a task that already holds its alloc_lock on the same CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible UAF in icmpv6_rcv()
Caching saddr and daddr before pskb_pull() is problematic
since skb->head can change.
Remove these temporary variables:
- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr
when net_dbg_ratelimited() is called in the slow path.
- Avoid potential future misuse after pskb_pull() call. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
Two error handling issues exist in xe_exec_queue_create_ioctl():
1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps
to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in
preempt fence mode, xe_vm_add_compute_exec_queue() has already added
the queue to the VM's compute exec queue list. Skipping the kill
leaves the queue on that list, leading to a dangling pointer after
the queue is freed.
2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has
succeeded, the error path does not call
xe_hw_engine_group_del_exec_queue() to remove the queue from the hw
engine group list. The queue is then freed while still linked into
the hw engine group, causing a use-after-free.
Fix both by:
- Changing the xe_hw_engine_group_add_exec_queue() failure path to jump
to kill_exec_queue so that xe_exec_queue_kill() properly removes the
queue from the VM's compute list.
- Adding a del_hw_engine_group label before kill_exec_queue for the
xa_alloc() failure path, which removes the queue from the hw engine
group before proceeding with the rest of the cleanup.
(cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8) |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Drop CLONE_THREAD requirement for private default hash alloc
Currently need_futex_hash_allocate_default() depends on strict pthread
semantics, abusing CLONE_THREAD. This breaks the non-concurrency
assumptions when doing the mm->futex_ref pcpu allocations, leading to
bugs[0] when sharing the mm in other ways; ie:
BUG: KASAN: slab-use-after-free in futex_hash_put
... where the +1 bias can end up on a percpu counter that mm->futex_ref
no longer points at.
Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding
vfork keeps the existing paths untouched (no overhead), and we can't
race in the first place: either the parent is suspended and the child
runs alone, or mm->futex_ref is already allocated from an earlier
CLONE_VM. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: fix UAF with retry loop
Retry doesn't work here, since bo will be freed on error, leading to
UAF. However, now that we do the alloc & init before the attach, we can
now combine this as one unit and have the init do the alloc for us. This
should make the retry safe.
Reported by Sashiko.
v2: Fix up the error unwind (CI)
(cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init()
mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When
ib_create_srq() fails for s1, the error branch destroys s0 but falls
through and unconditionally assigns the freed s0 and the ERR_PTR s1 to
devr->s0 and devr->s1.
This leads to several problems: the lock-free fast path checks
"if (devr->s1) return 0;" and treats the ERR_PTR as already initialised;
users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via
to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences
the ERR_PTR and double-frees s0 on teardown.
Fix by adding the same `goto unlock` in the s1 failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: use safe list iteration in radar detect work
The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to
be freed and removed from the list. Guard against this to avoid a
slab-use-after-free error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: remove station if connection prep fails
If connection preparation fails for MLO connections, then the
interface is completely reset to non-MLD. In this case, we must
not keep the station since it's related to the link of the vif
being removed. Delete an existing station. Any "new_sta" is
already being removed, so that doesn't need changes.
This fixes a use-after-free/double-free in debugfs if that's
enabled, because a vif going from MLD (and to MLD, but that's
not relevant here) recreates its entire debugfs. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Fix shadow paging use-after-free due to unexpected GFN
The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus
the SPTE index. This assumption breaks for shadow paging if the guest
page tables are modified between VM entries (similar to commit
aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even
when creating an MMIO SPTE", 2026-03-27). The flow is as follows:
- a PDE is installed for a 2MB mapping, and a page in that area is
accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages;
the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because
the guest's mapping is a huge page (and thus contiguous).
- the PDE mapping is changed from outside the guest.
- the guest accesses another page in the same 2MB area. KVM installs
a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN
(i.e. based on the new mapping, as changed in the previous step) but
that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore
the rmap entry cannot be found and removed when the kvm_mmu_page
is zapped.
- the memslot that covers the first 2MB mapping is deleted, and the
kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove()
only looks at the [sp->gfn, sp->gfn + 511] range established in step 1,
and fails to find the rmap entry that was recorded by step 3.
- any operation that causes an rmap walk for the same page accessed
by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page.
This includes dirty logging or MMU notifier invalidations (e.g., from
MADV_DONTNEED).
The underlying issue is that KVM's walking of shadow PTEs assumes that
if a SPTE is present when KVM wants to install a non-leaf SPTE, then the
existing kvm_mmu_page must be for the correct gfn. Because the only way
for the gfn to be wrong is if KVM messed up and failed to zap a SPTE...
which shouldn't happen, but *actually* only happens in response to a
guest write.
That bug dates back literally forever, as even the first version of KVM
assumes that the GFN matches and walks into the "wrong" shadow page.
However, that was only an imprecision until 2032a93d66fa ("KVM: MMU:
Don't allocate gfns page for direct mmu pages") came along.
Fix it by checking for a target gfn mismatch and zapping the existing
SPTE. That way the old SP and rmap entries are gone, KVM installs
the rmap in the right location, and everyone is happy. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix potential UAF in create_big_sync
Add hci_conn_valid() check in create_big_sync() to detect stale
connections before proceeding with BIG creation. Handle the
resulting -ECANCELED in create_big_complete() and re-validate the
connection under hci_dev_lock() before dereferencing, matching the
pattern used by create_le_conn_complete() and create_pa_complete().
Keep the hci_conn object alive across the async boundary by taking
a reference via hci_conn_get() when queueing create_big_sync(), and
dropping it in the completion callback. The refcount and the lock
are complementary: the refcount keeps the object allocated, while
hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on
hdev->conn_hash, as required by hci_conn_del().
hci_conn_put() is called outside hci_dev_unlock() so the final put
(which resolves to kfree() via bt_link_release) does not run under
hdev->lock, though the release path would be safe either way.
Without this, create_big_complete() would unconditionally
dereference the conn pointer on error, causing a use-after-free
via hci_connect_cfm() and hci_conn_del(). |
