| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed
When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has
no MSI controller device tree node and GICv4, it results a panic as
“gic_domain” is NULL and the kernel attempts to access it.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
Mem abort info:
ESR = 0x0000000096000006
CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : __irq_domain_instantiate+0x1d4/0x578
lr : __irq_domain_instantiate+0x1cc/0x578
Set vLPI support to false at init time if the host has no ITS, so it
propagates properly to kvm_vgic_global_state.has_gicv4. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v5: Immediately exec priority drop following activate
With GICv5 an interrupt of equal or lower priority cannot be signalled
until there has been a priority drop. This is done via the GIC CDEOI
system instruction. Once this has been executed, the hardware is able
to signal the next interrupt if there is one.
As all interrupts are programmed to have the same priority, no new
interrupts can be signalled until the priority drop has happened. This
can cause issues when, for example, an interrupt remains active while
a long running process takes place, such as when injecting a physical
interrupt into a guest VM in software.
The GICv5 driver has so far done the priority drop as part of
irq_eoi(), i.e., at the same time as deactivating the interrupt. This
means that any long running process (or VM) could block incoming
interrupts, effectively causing a denial of service for all other
interrupts.
Rather than doing the EOI as part of irq_eoi() (which the name would
suggest would be a good place for it), move it to happen immediately
after acknowledging an interrupt in the main GICv5 interrupt
handler. The deactivation of interrupts (GIC CDDI) remains implemented
as part of irq_eoi(), which means that the same interrupt cannot be
signalled a second time until deactivated by software. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: handle set_blocksize failures
ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| A Null pointer dereference problem was found in ida_free in lib/idr.c in the Linux Kernel. This issue may allow an attacker using this library to cause a denial of service problem due to a missing check at a function return. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: kprobes: Allow reentering kprobes while single-stepping
A kprobe can be hit while another kprobe is in KPROBE_HIT_SS state. This
can happen when tracing or perf code runs from the debug exception path
while the first kprobe is preparing or executing its out-of-line
single-step instruction.
Currently arm64 treats a kprobe hit in KPROBE_HIT_SS as unrecoverable,
the same as a hit in KPROBE_REENTER. This is too strict. A hit in
KPROBE_HIT_SS is still a one-level reentry and can be handled by saving
the current kprobe state and setting up single-step for the new probe,
just like reentry from KPROBE_HIT_ACTIVE or KPROBE_HIT_SSDONE.
The truly unrecoverable case is hitting another kprobe while already in
KPROBE_REENTER, because the reentry save area has already been consumed.
Move KPROBE_HIT_SS to the recoverable reentry cases and leave
KPROBE_REENTER as the unrecoverable nested reentry case.
This change also requires saving saved_irqflag in struct prev_kprobe.
When a nested kprobe calls kprobes_save_local_irqflag(), it overwrites
kcb->saved_irqflag with the currently masked DAIF value, losing the
outer kprobe's original DAIF state. Without this fix, when the outer
kprobe's single-step finishes, kprobes_restore_local_irqflag() applies
the wrong DAIF mask and leaves interrupts permanently disabled.
Extend struct prev_kprobe with a saved_irqflag field and save/restore it
alongside kp and status. This ensures the outer kprobe's original
interrupt state is preserved across reentry.
This mirrors the x86 fix in commit 6a5022a56ac3
("kprobes/x86: Allow to handle reentered kprobe on single-stepping"). |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: reject oversized dirents in page cache
fuse_add_dirent_to_cache() computes a serialized dirent size from the
server-controlled namelen field and copies the dirent into a single
page-cache page. The existing logic only checks whether the dirent fits
in the remaining space of the current page and advances to a fresh page
if not. It never checks whether the dirent itself exceeds PAGE_SIZE.
As a result, a malicious FUSE server can return a dirent with
namelen=4095, producing a serialized record size of 4120 bytes. On 4 KiB
page systems this causes memcpy() to overflow the cache page by 24 bytes
into the following kernel page.
Reject dirents that cannot fit in a single page before copying them into
the readdir cache. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/gsp: add SEC2 to GA100 chip table
The booter-load and booter-unload firmware run on the SEC2 falcon.
During tu102_gsp_oneinit(), the booter constructor needs device->sec2
to access the SEC2 falcon.
Without the .sec2 entry, device->sec2 is NULL and this dereference
crashes during GSP-RM boot. |
| In the Linux kernel, the following vulnerability has been resolved:
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is
called only when the timer is enabled, we need to call
j1939_session_deactivate_activate_next() if we cancelled the timer.
Otherwise, refcount for j1939_session leaks, which will later appear as
| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix refcounting of iso_conn
iso_conn_del() and iso_chan_del() have a race that results to double-put
of iso_conn:
[Task hdev->workqueue] [Task 2]
iso_conn_del iso_chan_del
iso_conn_hold_unless_zero iso_conn_lock
iso_conn_lock conn->sk = NULL
iso_conn_unlock
sk = iso_sock_hold(conn) <---------´
if (!sk) iso_conn_put iso_conn_put
iso_conn_put /* UAF */
The extra put for !sk in iso_conn_del() is currently required since
failing iso_chan_add() may leave iso_conn not associated with any sk.
Fix by having iso_pi(sk)->conn own refcount when non-NULL, so
iso_conn_del does not need to put it. Adjust the iso_conn_add()
refcounting so that conn is put if it does not get associated with an
sk. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_gre: make ipgre_header() robust
Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust")
Over the years, syzbot found many ways to crash the kernel
in ipgre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ipgre device.
[1]
skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0
kernel BUG at net/core/skbuff.c:213 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213
Call Trace:
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 |
| In the Linux kernel, the following vulnerability has been resolved:
fou: Don't allow 0 for FOU_ATTR_IPPROTO.
fou_udp_recv() has the same problem mentioned in the previous
patch.
If FOU_ATTR_IPPROTO is set to 0, skb is not freed by
fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu().
Let's forbid 0 for FOU_ATTR_IPPROTO. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_ag
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: fix dma_free_coherent() pointer
dma_alloc_coherent() allocates a DMA mapped buffer and stores the
addresses in XXX_unaligned fields. Those should be reused when freeing
the buffer rather than the aligned addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-core: fix wrong reinitialization of ringbuffer on reopen
dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the
DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which
reinitializes the waitqueue list head to empty.
Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the
same DVR device share it), this orphans any existing waitqueue entries
from io_uring poll or epoll, leaving them with stale prev/next pointers
while the list head is reset to {self, self}.
The waitqueue and spinlock in dvr_buffer are already properly
initialized once in dvb_dmxdev_init(). The open path only needs to
reset the buffer data pointer, size, and read/write positions.
Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct
assignment of data/size and a call to dvb_ringbuffer_reset(), which
properly resets pread, pwrite, and error with correct memory ordering
without touching the waitqueue or spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: Avoid releasing netdev before teardown completes
The patch cited in the Fixes tag below changed the teardown code for
OVS ports to no longer unconditionally take the RTNL. After this change,
the netdev_destroy() callback can proceed immediately to the call_rcu()
invocation if the IFF_OVS_DATAPATH flag is already cleared on the
netdev.
The ovs_netdev_detach_dev() function clears the flag before completing
the unregistration, and if it gets preempted after clearing the flag (as
can happen on an -rt kernel), netdev_destroy() can complete and the
device can be freed before the unregistration completes. This leads to a
splat like:
[ 998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI
[ 998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT
[ 998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025
[ 998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0
[ 998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90
[ 998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246
[ 998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000
[ 998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05
[ 998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000
[ 998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006
[ 998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000
[ 998.393931] FS: 00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000
[ 998.393936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0
[ 998.393944] PKRU: 55555554
[ 998.393946] Call Trace:
[ 998.393949] <TASK>
[ 998.393952] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393961] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393975] ? dp_device_event+0x41/0x80 [openvswitch]
[ 998.394009] ? __die_body.cold+0x8/0x12
[ 998.394016] ? die_addr+0x3c/0x60
[ 998.394027] ? exc_general_protection+0x16d/0x390
[ 998.394042] ? asm_exc_general_protection+0x26/0x30
[ 998.394058] ? dev_set_promiscuity+0x8d/0xa0
[ 998.394066] ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch]
[ 998.394092] dp_device_event+0x41/0x80 [openvswitch]
[ 998.394102] notifier_call_chain+0x5a/0xd0
[ 998.394106] unregister_netdevice_many_notify+0x51b/0xa60
[ 998.394110] rtnl_dellink+0x169/0x3e0
[ 998.394121] ? rt_mutex_slowlock.constprop.0+0x95/0xd0
[ 998.394125] rtnetlink_rcv_msg+0x142/0x3f0
[ 998.394128] ? avc_has_perm_noaudit+0x69/0xf0
[ 998.394130] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 998.394132] netlink_rcv_skb+0x50/0x100
[ 998.394138] netlink_unicast+0x292/0x3f0
[ 998.394141] netlink_sendmsg+0x21b/0x470
[ 998.394145] ____sys_sendmsg+0x39d/0x3d0
[ 998.394149] ___sys_sendmsg+0x9a/0xe0
[ 998.394156] __sys_sendmsg+0x7a/0xd0
[ 998.394160] do_syscall_64+0x7f/0x170
[ 998.394162] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 998.394165] RIP: 0033:0x7fad61bf4724
[ 998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
[ 998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724
[ 998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003
[ 998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f
[ 998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Apply the fine-grained UNDEFs without FEAT_FGT
FGUs don't actually require hardware support, so don't gate fgt trap
config insertion on FGT. This is the only action required to allow FGUs
always, as kvm_calculate_traps() already computes the FGU bits with or
without FEAT_FGT.
This also fixes a spurious WARN when a TLBI OS is run on a guest in vEL1
without FEAT_TLBIOS on non FEAT_FGT hardware. In this configuration the
course-grained HCR_EL2.TTLBOS trap reaches the handler handle_tlbi_el1(),
which expects an EL1 TLBI only from vEL2. With FGUs enabled the UNDEF
will be injected without needing the specific handler.
[oliver: Take Wei-Lin's suggested changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN
Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN,
as empirical testing shows that the CPU performs the requested TLB flush if
and only if VMRUN is successful, i.e. clearing TLB control on a failed
VMRUN effectively drops a TLB flush.
Explicitly track the need to flush all ASIDs on a per-CPU basis, as the
ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus,
this also obviates the need to avoid clobbering FLUSH_ALL_ASID with
TLB_CONTROL_FLUSH_ASID, e.g. in svm_flush_tlb_asid().
Deliberately don't bother saving/restoring the "old" tlb_ctl on failure,
in quotes because it's not exactly the old tlb_ctl, it's the tlb_ctl from
after pre_svm_run(), but before updating tlb_ctl for flush_all_asids. If
VMRUN fails and TLB_CONTROL_FLUSH_ALL_ASID is forced, then the next
successful run of the VMCB *may* unnecessarily flush all ASIDs, which
strictly speaking could result in noisy neighbor issues. However, the
fact that new_asid() is already guest-triggerable, because of KVM's flawed
behavior of clearing the ASID on emulated INIT, means that a guest can
already trigger a flush of all ASIDs at roughly the same rate. And once
KVM stops clobbering the ASID on emulated INIT, *or* assigns a static ASID
to each vCPU, this flaw goes away. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded
Leave control.erap_ctl and control.clean as-is in the VMCS if VMRUN fails,
because as per AMD:
there's no explicit architectural guarantee about the behavior in the
presence of VMRUN failures. So the best thing to do would be to assume
that if VMRUN fails, the actions requested in the control fields may not
have been performed. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified
Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the
runtime eVMCS controls (pin, primary, secondary, etc.) are being updated.
If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and
then runs the same L2 with TPR virtualization disabled, KVM will fail to
refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR
virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or
L1 by proxy) read and write L0's TPR. |
