| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
igb: remove napi_synchronize() in igb_down()
When an AF_XDP zero-copy application terminates abruptly (e.g., kill -9),
the XSK buffer pool is destroyed but NAPI polling continues.
igb_clean_rx_irq_zc() repeatedly returns the full budget, preventing
napi_complete_done() from clearing NAPI_STATE_SCHED.
igb_down() calls napi_synchronize() before napi_disable() for each queue
vector. napi_synchronize() spins waiting for NAPI_STATE_SCHED to clear,
which never happens. igb_down() blocks indefinitely, the TX watchdog
fires, and the TX queue remains permanently stalled.
napi_disable() already handles this correctly: it sets NAPI_STATE_DISABLE.
After a full-budget poll, __napi_poll() checks napi_disable_pending(). If
set, it forces completion and clears NAPI_STATE_SCHED, breaking the loop
that napi_synchronize() cannot.
napi_synchronize() was added in commit 41f149a285da ("igb: Fix possible
panic caused by Rx traffic arrival while interface is down").
napi_disable() provides stronger guarantees: it prevents further
scheduling and waits for any active poll to exit.
Other Intel drivers (ixgbe, ice, i40e) use napi_disable() without a
preceding napi_synchronize() in their down paths.
Remove redundant napi_synchronize() call and reorder napi_disable()
before igb_set_queue_napi() so the queue-to-NAPI mapping is only
cleared after polling has fully stopped. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix dir separator in SMB1 UNIX mounts
When calling cifs_mount_get_tcon() with SMB1 UNIX mounts,
@cifs_sb->mnt_cifs_flags needs to be read or updated only after
calling reset_cifs_unix_caps(), otherwise it might end up with missing
CIFS_MOUNT_POSIXACL and CIFS_MOUNT_POSIX_PATHS bits.
This fixes the wrong dir separator used in paths caused by the missing
CIFS_MOUNT_POSIX_PATHS bit in cifs_sb_info::mnt_cifs_flags. |
| In the Linux kernel, the following vulnerability has been resolved:
rtnetlink: add missing netlink_ns_capable() check for peer netns
rtnl_newlink() lacks a CAP_NET_ADMIN capability check on the peer
network namespace when creating paired devices (veth, vxcan,
netkit). This allows an unprivileged user with a user namespace
to create interfaces in arbitrary network namespaces, including
init_net.
Add a netlink_ns_capable() check for CAP_NET_ADMIN in the peer
namespace before allowing device creation to proceed. |
| A security issue was discovered in ingress-nginx where the `nginx.ingress.kubernetes.io/rewrite-target` Ingress annotation can be used to inject configuration into nginx. This can lead to arbitrary code execution in the context of the ingress-nginx controller, and disclosure of Secrets accessible to the controller. (Note that in the default installation, the controller can access all Secrets cluster-wide.) |
| The bson_validate function may return early on specific inputs and incorrectly report success. This behavior could result in skipping validation for BSON data, allowing malformed or invalid UTF-8 sequences to bypass validation and be processed incorrectly. The issue may affect applications that rely on these functions to validate untrusted BSON data before further processing. This issue affects MongoDB C Driver versions prior to 1.30.5, MongoDB C Driver version 2.0.0 and MongoDB C Driver version 2.0.1 |
| An issue was discovered in certain Apple products. iOS before 10.3 is affected. The issue involves the "Quick Look" component. It allows remote attackers to trigger telephone calls to arbitrary numbers via a tel: URL in a PDF document, as exploited in the wild in October 2016. |
| PJSIP is a free and open source multimedia communication library written in C. When processing certain packets, PJSIP may incorrectly switch from using SRTP media transport to using basic RTP upon SRTP restart, causing the media to be sent insecurely. The vulnerability impacts all PJSIP users that use SRTP. The patch is available as commit d2acb9a in the master branch of the project and will be included in version 2.13. Users are advised to manually patch or to upgrade. There are no known workarounds for this vulnerability. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 8.4 through 8.5 contain an improper authentication vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.5, LTS2025 release version 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.50, contain an exposure of sensitive information to an unauthorized actor vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to information exposure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip inactive planes within ModeSupportAndSystemConfiguration
[Why]
Coverity reports Memory - illegal accesses.
[How]
Skip inactive planes. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Acquire kvm->srcu when handling KVM_SET_VCPU_EVENTS
Grab kvm->srcu when processing KVM_SET_VCPU_EVENTS, as KVM will forcibly
leave nested VMX/SVM if SMM mode is being toggled, and leaving nested VMX
reads guest memory.
Note, kvm_vcpu_ioctl_x86_set_vcpu_events() can also be called from KVM_RUN
via sync_regs(), which already holds SRCU. I.e. trying to precisely use
kvm_vcpu_srcu_read_lock() around the problematic SMM code would cause
problems. Acquiring SRCU isn't all that expensive, so for simplicity,
grab it unconditionally for KVM_SET_VCPU_EVENTS.
=============================
WARNING: suspicious RCU usage
6.10.0-rc7-332d2c1d713e-next-vm #552 Not tainted
-----------------------------
include/linux/kvm_host.h:1027 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by repro/1071:
#0: ffff88811e424430 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x7d/0x970 [kvm]
stack backtrace:
CPU: 15 PID: 1071 Comm: repro Not tainted 6.10.0-rc7-332d2c1d713e-next-vm #552
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x13f/0x1a0
kvm_vcpu_gfn_to_memslot+0x168/0x190 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
nested_vmx_load_msr+0x6b/0x1d0 [kvm_intel]
load_vmcs12_host_state+0x432/0xb40 [kvm_intel]
vmx_leave_nested+0x30/0x40 [kvm_intel]
kvm_vcpu_ioctl_x86_set_vcpu_events+0x15d/0x2b0 [kvm]
kvm_arch_vcpu_ioctl+0x1107/0x1750 [kvm]
? mark_held_locks+0x49/0x70
? kvm_vcpu_ioctl+0x7d/0x970 [kvm]
? kvm_vcpu_ioctl+0x497/0x970 [kvm]
kvm_vcpu_ioctl+0x497/0x970 [kvm]
? lock_acquire+0xba/0x2d0
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x40c/0x6f0
? lock_release+0xb7/0x270
__x64_sys_ioctl+0x82/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7ff11eb1b539
</TASK> |
| IBM Turbonomic prometurbo agent 8.16.0 through 8.17.6 IBM Turbonomic Application Resource Management grants excessive cluster‑wide permissions, including unrestricted read access to all secrets. An attacker that compromises the operator or its service account can exfiltrate sensitive credentials, escalate privileges, and potentially achieve full cluster compromise. |
| Insufficient verification of data authenticity in PackageManagerService prior to SMR Mar-2026 Release 1 allows local attackers to modify the installation restriction of specific application. |
| A vulnerability was found in Tencent AI-Infra-Guard 4.0. The affected element is an unknown function of the file common/websocket/task_manager.go of the component Task Detail Endpoint. Performing a manipulation results in information disclosure. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Backstage is an open framework for building developer portals. Prior to 3.1.5, authenticated users with permission to execute scaffolder dry-runs can gain access to server-configured environment secrets through the dry-run API response. Secrets are properly redacted in log output but not in all parts of the response payload. Deployments that have configured scaffolder.defaultEnvironment.secrets are affected. This is patched in @backstage/plugin-scaffolder-backend version 3.1.5. |
| When sending invalid base64 SASL data, login process is disconnected from the auth server, causing all active authentication sessions to fail. Invalid BASE64 data can be used to DoS a vulnerable server to break concurrent logins. Install fixed version or disable concurrency in login processes (heavy perfomance penalty on large deployments). No publicly available exploits are known. |
| ManageSieve AUTHENTICATE command crashes when using literal as SASL initial response. This can be used to crash ManageSieve service repeatedly, making it unavailable for other users. Control access to ManageSieve port, or disable the service if it's not needed. Alternatively upgrade to a fixed version. No publicly available exploits are known. |
| frp is a fast reverse proxy. From 0.43.0 to 0.68.0, frp contains an authentication bypass in the HTTP vhost routing path when routeByHTTPUser is used as part of access control. In proxy-style requests, the routing logic uses the username from Proxy-Authorization to select the routeByHTTPUser backend, while the access control check uses credentials from the regular Authorization header. As a result, an attacker who can reach the HTTP vhost entrypoint and knows or can guess the protected routeByHTTPUser value may access a backend protected by httpUser / httpPassword even with an incorrect Proxy-Authorization password. This issue affects deployments that explicitly use routeByHTTPUser. It does not affect ordinary HTTP proxies that do not use this feature. This vulnerability is fixed in 0.68.1. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/xe: Reorganize the init to decouple migration from reset
Attempting to issue reset on VF devices that don't support migration
leads to the following:
BUG: unable to handle page fault for address: 00000000000011f8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 7443 Comm: xe_sriov_flr Tainted: G S U 7.0.0-rc1-lgci-xe-xe-4588-cec43d5c2696af219-nodebug+ #1 PREEMPT(lazy)
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023
RIP: 0010:xe_sriov_vfio_wait_flr_done+0xc/0x80 [xe]
Code: ff c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 53 <83> bf f8 11 00 00 02 75 61 41 89 f4 85 f6 74 52 48 8b 47 08 48 89
RSP: 0018:ffffc9000f7c39b8 EFLAGS: 00010202
RAX: ffffffffa04d8660 RBX: ffff88813e3e4000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000f7c39c8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888101a48800
R13: ffff88813e3e4150 R14: ffff888130d0d008 R15: ffff88813e3e40d0
FS: 00007877d3d0d940(0000) GS:ffff88890b6d3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000011f8 CR3: 000000015a762000 CR4: 0000000000f52ef0
PKRU: 55555554
Call Trace:
<TASK>
xe_vfio_pci_reset_done+0x49/0x120 [xe_vfio_pci]
pci_dev_restore+0x3b/0x80
pci_reset_function+0x109/0x140
reset_store+0x5c/0xb0
dev_attr_store+0x17/0x40
sysfs_kf_write+0x72/0x90
kernfs_fop_write_iter+0x161/0x1f0
vfs_write+0x261/0x440
ksys_write+0x69/0xf0
__x64_sys_write+0x19/0x30
x64_sys_call+0x259/0x26e0
do_syscall_64+0xcb/0x1500
? __fput+0x1a2/0x2d0
? fput_close_sync+0x3d/0xa0
? __x64_sys_close+0x3e/0x90
? x64_sys_call+0x1b7c/0x26e0
? do_syscall_64+0x109/0x1500
? __task_pid_nr_ns+0x68/0x100
? __do_sys_getpid+0x1d/0x30
? x64_sys_call+0x10b5/0x26e0
? do_syscall_64+0x109/0x1500
? putname+0x41/0x90
? do_faccessat+0x1e8/0x300
? __x64_sys_access+0x1c/0x30
? x64_sys_call+0x1822/0x26e0
? do_syscall_64+0x109/0x1500
? tick_program_event+0x43/0xa0
? hrtimer_interrupt+0x126/0x260
? irqentry_exit+0xb2/0x710
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7877d5f1c5a4
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d a5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
RSP: 002b:00007fff48e5f908 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007877d5f1c5a4
RDX: 0000000000000001 RSI: 00007877d621b0c9 RDI: 0000000000000009
RBP: 0000000000000001 R08: 00005fb49113b010 R09: 0000000000000007
R10: 0000000000000000 R11: 0000000000000202 R12: 00007877d621b0c9
R13: 0000000000000009 R14: 00007fff48e5fac0 R15: 00007fff48e5fac0
</TASK>
This is caused by the fact that some of the xe_vfio_pci_core_device
members needed for handling reset are only initialized as part of
migration init.
Fix the problem by reorganizing the code to decouple VF init from
migration init. |
| Parsing logic flaws cause non-signature data to be misidentified as valid signatures when processing malformed form field hierarchies, leading to invalid memory writes and program crashes during internal data structure construction. |
