| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix use-after-free of the discoverer in tipc_disc_rcv()
bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(),
but tipc_disc_rcv() still dereferences b->disc in RX softirq under
rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv).
L2 bearers are safe thanks to the synchronize_net() in
tipc_disable_l2_media(), but the UDP bearer defers that call to the
cleanup_bearer() workqueue, so the discoverer is freed with no grace
period:
BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149)
Read of size 8 at addr ffff88802348b728 by task poc_tipc/184
<IRQ>
tipc_disc_rcv (net/tipc/discover.c:149)
tipc_rcv (net/tipc/node.c:2126)
tipc_udp_recv (net/tipc/udp_media.c:391)
udp_rcv (net/ipv4/udp.c:2643)
ip_local_deliver_finish (net/ipv4/ip_input.c:241)
</IRQ>
Freed by task 181:
kfree (mm/slub.c:6565)
bearer_disable (net/tipc/bearer.c:418)
tipc_nl_bearer_disable (net/tipc/bearer.c:1001)
The bearer is freed with kfree_rcu(); free the discoverer the same way.
Add an rcu_head to struct tipc_discoverer and free it and its skb from an
RCU callback.
Because the RCU callback (tipc_disc_free_rcu) lives in module text, a
call_rcu() that is still pending when the tipc module is unloaded would
invoke a freed function. Add an rcu_barrier() to tipc_exit() after the
bearer subsystem has been torn down, so all pending discoverer callbacks
have run before the module text goes away.
Reachable from an unprivileged user namespace: the TIPCv2 genl family is
netnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPC
and CONFIG_TIPC_MEDIA_UDP. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle
tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the
defragmentation engine (e.g. act_ct on out-of-order fragments). When
that happens the skb is no longer owned by the caller and must not be
touched again.
tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the
switch and returned the skb to the caller as if classification had
passed. The only qdisc that wires up qevents today is RED, via three call sites
(qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop)
red_enqueue() was continuing to operate on an skb it no longer owns in this
case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF.
tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10
tc filter add block 10 ... action ct
(with ct defrag enabled and traffic that produces out-of-order
fragments, e.g. a fragmented UDP stream)
Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress
and egress fast paths do: treat it as stolen and return NULL without
touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be
dropped/freed here, as it is no longer owned by us. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix MLE defragmentation
If either reconf or EPCS multi-link element (MLE) is contained in
a non-transmitted profile, the defragmentation routine is called
with a pointer to the defragmented copy, but the original elements.
This is incorrect for two reasons:
- if the original defragmentation was needed, it will not find the
correct data
- if the original frame is at a higher address, the parsing will
potentially overrun the heap data (though given the layout of
the buffers, only into the new defragmentation buffer, and then
it has to stop and fail once that's filled with copied data.
Fix it by tracking the container along with the pointer and in
doing so also unify the two almost identical defragmentation
routines. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
If acpi_nfit_init() fails after adding the acpi_desc object to the
acpi_descs list, that object is never removed from that list because
the acpi_nfit_shutdown() devm action is not added for the NFIT device
in that case. Next, the acpi_nfit_init() failure causes
acpi_nfit_probe() to fail, the acpi_desc object is freed, and a
dangling pointer is left behind in the acpi_descs. Any subsequent
ACPI Machine Check Exception will trigger nfit_handle_mce() which
iterates over acpi_descs and so a use-after-free will occur.
Moreover, if acpi_nfit_probe() returns 0 after installing a notify
handler for the NFIT device and without allocating the acpi_desc
object and setting the NFIT device's driver data pointer, the
acpi_desc object will be allocated by acpi_nfit_update_notify()
and acpi_nfit_init() will be called to initialize it. Regardless
of whether or not acpi_nfit_init() fails in that case, the
acpi_nfit_shutdown() devm action is not added for the NFIT device
and acpi_desc is never removed from the acpi_descs list. If the
acpi_desc object is freed subsequently on driver removal, any
subsequent ACPI MCE will lead to a use-after-free like in the
previous case.
To address the first issue mentioned above, make acpi_nfit_probe()
call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and
to address the other one, add a remove callback to the driver and
make it call acpi_nfit_shutdown(). Also, since it is now possible to
pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it
may not have been initialized, add checks against NULL for acpi_desc and
its nvdimm_bus field to that function and make acpi_nfit_unregister()
clear the latter after unregistering the NVDIMM bus. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: zero chainstack array
sashiko reports:
looking at ebtables table
translation, could a sparse cpu_possible_mask lead to an uninitialized pointer
free?
If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible,
but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at
CPU 2, the cleanup loop will blindly decrement and call vfree() on
newinfo->chainstack[1].
Not a real-world bug, such allocation isn't expected to fail
in the first place. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: do not limit zeroing to orig_size when only red zoning is enabled
When init (zeroing) on allocation is requested, for kmalloc() we
generally have to zero the full object size even if a smaller size is
requested, in order to provide krealloc()'s __GFP_ZERO guarantees.
But if we track the requested size, krealloc() uses that information to
do the right thing, so we can zero only the requested size. With red
zoning also enabled, any extra size became part of the red zone, so it
must not be zeroed and thus we must zero only the requested size.
However the current check is imprecise, and will trigger also when only
SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking
the requested size). This means enabling red zoning alone can compromise
krealloc()'s __GFP_ZERO contract.
Fix this by using slub_debug_orig_size() instead, which is the exact
check for whether the requested size is tracked. We don't need to care
if red zoning is also enabled or not. Also update and expand the
comment accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: re-lock request before returning from fuse_ref_folio()
fuse_ref_folio() unlocks the request but does not re-lock it before
returning. fuse_chan_abort() can end the request and the async end
callback (eg fuse_writepage_free()) can free the args while the
subsequent copy chain logic after fuse_ref_folio() accesses them,
leading to use-after-free issues.
Fix this by locking the request in fuse_ref_folio() before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix unlocked writing to ICOSQ
During napi poll, when the affinity changes and there's still XSK work
to be done, we trigger an ICOSQ interrupt on the new CPU. However, this
triggering on the ICOSQ is done unprotected.
There are 2 such races:
A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is
running from a different CPU due to affinity change. This can happen
because IRQ triggering is done after napi_complete_done(). At this point
the NAPI can be scheduled on a different CPU. Like this:
CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI)
------------------------------- --------------------------------
napi_complete_done() clears SCHED
mlx5e_cq_arm(...)
napi_schedule_prep() sets SCHED
mlx5e_napi_poll()
mlx5e_xsk_alloc_rx_mpwqe()
mlx5e_icosq_sync_lock() // noop
memcpy 640 B UMR body
advance sq->pc by 10
mlx5e_trigger_irq(&c->icosq)
wqe_info[pi] = {NOP, 1}
mlx5e_post_nop() advances sq->pc
B) mlx5e_trigger_irq() is called on the ICOSQ when
mlx5e_trigger_napi_icosq() is running.
The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized
locking scheme that doesn't work for this scenario. Kick the async ICOSQ
instead which is always locked.
This issue was noticed in the wild with the following splat:
netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd
WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...]
[...]
Call Trace:
<IRQ>
mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core]
__napi_poll+0x30/0x200
? skb_defer_free_flush+0x9c/0xc0
net_rx_action+0x2fe/0x3f0
handle_softirqs+0xd8/0x340
__irq_exit_rcu+0xbc/0xe0
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x26/0x40
[...]
---[ end trace 0000000000000000 ]---
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4,
opcode 0xd, syndrome 0x2, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2
WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64
00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02
00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02
00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02
00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4,
opcode 0xd, syndrome 0x5, vendor syndrome 0xf9
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix potential for tearing in ->remote_i_size and ->zero_point
Fix potential tearing in using ->remote_i_size and ->zero_point by copying
i_size_read() and i_size_write() and using the same seqcount as for i_size.
We need to make sure that netfslib and the filesystems that use it always
hold i_lock whilst updating any of the sizes to prevent i_size_seqcount
from getting corrupted. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Reject MPA FPDU length underflow before signed receive math
A malicious connected siw peer can send an iWARP FPDU whose MPA length
field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller
than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP
parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode]
.hdr_len, but never compares mpa_len against that header length.
siw_tcp_rx_data() then derives
srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd
+ MPA_HDR_SIZE;
where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this
point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest
on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below
hdr_len - MPA_HDR_SIZE underflows to a negative int.
The signed value then flows into siw_proc_write()/siw_proc_rresp() as
bytes = min(srx->fpdu_part_rem, srx->skb_new);
is handed to siw_check_mem() as an int len (whose interval check
addr + len > mem->va + mem->len is satisfied for a valid base when
len is negative), and reaches siw_rx_data() -> siw_rx_kva() /
siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header
copy branch in skb_copy_bits() promotes that to size_t, producing a
multi-gigabyte read.
KASAN under a KUnit harness that drives the real kernel TCP receive
path -- a loopback AF_INET socketpair, the malformed FPDU written via
kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock
dispatching to siw_tcp_rx_data -- reports:
BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480
Read of size 4294967295 at addr ffff888...
Call Trace:
skb_copy_bits
siw_rx_kva
siw_rx_data
siw_check_mem
siw_proc_write
siw_tcp_rx_data
__tcp_read_sock
siw_qp_llp_data_ready
tcp_data_ready
tcp_data_queue
Add the missing invariant at the earliest point where the peer header
is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly
the value the siw transmitter uses as the minimum mpa_len for each
opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the
protocol contract. Out-of-range FPDUs terminate the connection with
TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which
is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields
do not agree on the start of an FPDU"), the correct framing-error
class for this inconsistency. |
| In the Linux kernel, the following vulnerability has been resolved:
security/keys: fix missed RCU read section on lookup
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
If dcid is received for an already-assigned destination CID the spec
requires that both channels to be discarded, but calling l2cap_chan_del
may invalidate the tmp cursor created by list_for_each_entry_safe and
in fact it is the wrong procedure as the chan->dcid may be assigned
previously it really needs to be disconnected.
Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so
instead schedule l2cap_chan_timeout with delay 0 to close the channel
asynchronously. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: bind uarg before filling zerocopy skb
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: Fix use after free in debug code
We're not allowed to dereference "urb" after calling
usb_hcd_giveback_urb() so save the urb->status ahead of time. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: exthdrs: refresh nh after handling HAO option
ip6_parse_tlv() caches skb_network_header(skb) in nh while walking
IPv6 TLVs.
ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can
move the skb head and invalidate the cached network header pointer.
Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs
are parsed from the current skb head.
This matches the existing pattern used in ip6_parse_tlv() after helpers
that can modify skb header storage. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix potential UAF in TTM object purge
TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(),
move casting it to an i915_tt object later to actually get the right
pointer.
A user reported hitting the following bug under heavy use on DG2:
[26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI
[26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy)
[26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025
[26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915]
[26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78
[26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282
[26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000
[26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff
[26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000
[26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0
[26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0
[26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000
[26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0
[26620.095612] PKRU: 55555554
[26620.095612] Call Trace:
[26620.095615] <TASK>
[26620.095615] i915_ttm_move+0x2b9/0x420 [i915]
[26620.095642] ? ttm_tt_init+0x65/0x80 [ttm]
[26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915]
[26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm]
[26620.095669] ttm_bo_evict+0x100/0x150 [ttm]
[26620.095671] ? preempt_count_add+0x64/0xa0
[26620.095673] ? _raw_spin_lock+0xe/0x30
[26620.095675] ? _raw_spin_unlock+0xd/0x30
[26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915]
[26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm]
[26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm]
[26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm]
[26620.095709] ? init_object+0x62/0xd0
[26620.095712] ttm_bo_validate+0x7a/0x180 [ttm]
[26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915]
[26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915]
[26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095786] ? alloc_debug_processing+0xd0/0x100
[26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915]
[26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915]
[26620.095848] i915_vma_pin_ww+0x706/0x980 [i915]
[26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095904] eb_validate_vmas+0x170/0xa00 [i915]
[26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915]
[26620.095953] ? alloc_debug_processing+0xd0/0x100
[26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.095977] ? __wake_up_sync_key+0x32/0x50
[26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.096001] ? __slab_alloc.isra.0+0x67/0xc0
[26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915]
Results from decode_stacktrace.sh pointed to dereference of a file pointer
field of a i915 TTM page vector container associated with an object being
purged on eviction. That path is taken when the object is marked as no
longer needed.
Code analysis revealed a possibility of the i915 TTM page vector container
being replaced with a new instance inside a function that purges content
of the object, should it be still busy. That function is called,
indirectly via a more general function that changes the object's placement
and caching policy,
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: tlb: Flush walk cache when unsharing PMD tables
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: add hook transactions for device deletions
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: llsec: add skb_cow_data() before in-place crypto
llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(),
llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform
in-place cryptographic transformations on skb data. They build a
scatterlist with sg_init_one() pointing into the skb's linear data area
and then pass the same scatterlist as both src and dst to the crypto API
(e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt).
On the RX path, __ieee802154_rx_handle_packet() clones the received skb
before handing it to each subscriber via ieee802154_subif_frame(). The
cloned skb shares the same underlying data buffer via reference
counting. When llsec_do_decrypt() subsequently modifies this shared
buffer in place, it corrupts data that other clones -- potentially
belonging to other sockets or subsystems -- still reference.
On the TX path, similar data sharing can occur when an skb's head has
been cloned (skb_cloned() returns true).
The fix is to call skb_cow_data() before performing any in-place crypto
operation. skb_cow_data() ensures that the skb's data area is not
shared: if the skb head is cloned or the data spans multiple fragments,
it copies the data into a private buffer that can be safely modified in
place. This is the same pattern used by:
- ESP (net/ipv4/esp4.c, net/ipv6/esp6.c)
- MACsec (drivers/net/macsec.c)
- WireGuard (drivers/net/wireguard/receive.c)
- TIPC (net/tipc/crypto.c)
Without this guard, in-place crypto on shared skb data leads to:
- Silent data corruption of other skb clones
- Use-after-free when the crypto API scatterwalk writes through a
page that has already been freed by another clone's kfree_skb()
- Kernel crashes under concurrent 802.15.4 traffic with security
enabled (KASAN/KMSAN reports slab-use-after-free)
Found by 0sec (https://0sec.ai) using automated source analysis. |
