| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()
In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN()
instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: sch_sfq: don't allow 1 packet limit
The current implementation does not work correctly with a limit of
1. iproute2 actually checks for this and this patch adds the check in
kernel as well.
This fixes the following syzkaller reported crash:
UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6
index 65535 is out of range for type 'struct sfq_head[128]'
CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x125/0x19f lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347
sfq_link net/sched/sch_sfq.c:210 [inline]
sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238
sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500
sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525
qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319
qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296
netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline]
dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362
__dev_close_many+0x214/0x350 net/core/dev.c:1468
dev_close_many+0x207/0x510 net/core/dev.c:1506
unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738
unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695
unregister_netdevice include/linux/netdevice.h:2893 [inline]
__tun_detach+0x6b6/0x1600 drivers/net/tun.c:689
tun_detach drivers/net/tun.c:705 [inline]
tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640
__fput+0x203/0x840 fs/file_table.c:280
task_work_run+0x129/0x1b0 kernel/task_work.c:185
exit_task_work include/linux/task_work.h:33 [inline]
do_exit+0x5ce/0x2200 kernel/exit.c:931
do_group_exit+0x144/0x310 kernel/exit.c:1046
__do_sys_exit_group kernel/exit.c:1057 [inline]
__se_sys_exit_group kernel/exit.c:1055 [inline]
__x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055
do_syscall_64+0x6c/0xd0
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7fe5e7b52479
Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f.
RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0
R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270
The crash can be also be reproduced with the following (with a tc
recompiled to allow for sfq limits of 1):
tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s
../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1
ifconfig dummy0 up
ping -I dummy0 -f -c2 -W0.1 8.8.8.8
sleep 1
Scenario that triggers the crash:
* the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1
* TBF dequeues: it peeks from SFQ which moves the packet to the
gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so
it schedules itself for later.
* the second packet is sent and TBF tries to queues it to SFQ. qdisc
qlen is now 2 and because the SFQ limit is 1 the packet is dropped
by SFQ. At this point qlen is 1, and all of the SFQ slots are empty,
however q->tail is not NULL.
At this point, assuming no more packets are queued, when sch_dequeue
runs again it will decrement the qlen for the current empty slot
causing an underflow and the subsequent out of bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
rdma/cxgb4: Prevent potential integer overflow on 32bit
The "gl->tot_len" variable is controlled by the user. It comes from
process_responses(). On 32bit systems, the "gl->tot_len + sizeof(struct
cpl_pass_accept_req) + sizeof(struct rss_header)" addition could have an
integer wrapping bug. Use size_add() to prevent this. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: fix LED ID check in led_tg_check()
Syzbot has reported the following BUG detected by KASAN:
BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70
Read of size 1 at addr ffff8881022da0c8 by task repro/5879
...
Call Trace:
<TASK>
dump_stack_lvl+0x241/0x360
? __pfx_dump_stack_lvl+0x10/0x10
? __pfx__printk+0x10/0x10
? _printk+0xd5/0x120
? __virt_addr_valid+0x183/0x530
? __virt_addr_valid+0x183/0x530
print_report+0x169/0x550
? __virt_addr_valid+0x183/0x530
? __virt_addr_valid+0x183/0x530
? __virt_addr_valid+0x45f/0x530
? __phys_addr+0xba/0x170
? strlen+0x58/0x70
kasan_report+0x143/0x180
? strlen+0x58/0x70
strlen+0x58/0x70
kstrdup+0x20/0x80
led_tg_check+0x18b/0x3c0
xt_check_target+0x3bb/0xa40
? __pfx_xt_check_target+0x10/0x10
? stack_depot_save_flags+0x6e4/0x830
? nft_target_init+0x174/0xc30
nft_target_init+0x82d/0xc30
? __pfx_nft_target_init+0x10/0x10
? nf_tables_newrule+0x1609/0x2980
? nf_tables_newrule+0x1609/0x2980
? rcu_is_watching+0x15/0xb0
? nf_tables_newrule+0x1609/0x2980
? nf_tables_newrule+0x1609/0x2980
? __kmalloc_noprof+0x21a/0x400
nf_tables_newrule+0x1860/0x2980
? __pfx_nf_tables_newrule+0x10/0x10
? __nla_parse+0x40/0x60
nfnetlink_rcv+0x14e5/0x2ab0
? __pfx_validate_chain+0x10/0x10
? __pfx_nfnetlink_rcv+0x10/0x10
? __lock_acquire+0x1384/0x2050
? netlink_deliver_tap+0x2e/0x1b0
? __pfx_lock_release+0x10/0x10
? netlink_deliver_tap+0x2e/0x1b0
netlink_unicast+0x7f8/0x990
? __pfx_netlink_unicast+0x10/0x10
? __virt_addr_valid+0x183/0x530
? __check_object_size+0x48e/0x900
netlink_sendmsg+0x8e4/0xcb0
? __pfx_netlink_sendmsg+0x10/0x10
? aa_sock_msg_perm+0x91/0x160
? __pfx_netlink_sendmsg+0x10/0x10
__sock_sendmsg+0x223/0x270
____sys_sendmsg+0x52a/0x7e0
? __pfx_____sys_sendmsg+0x10/0x10
__sys_sendmsg+0x292/0x380
? __pfx___sys_sendmsg+0x10/0x10
? lockdep_hardirqs_on_prepare+0x43d/0x780
? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
? exc_page_fault+0x590/0x8c0
? do_syscall_64+0xb6/0x230
do_syscall_64+0xf3/0x230
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
Since an invalid (without '\0' byte at all) byte sequence may be passed
from userspace, add an extra check to ensure that such a sequence is
rejected as possible ID and so never passed to 'kstrdup()' and further. |
| libcurl's ASN1 parser code has the `GTime2str()` function, used for parsing an
ASN.1 Generalized Time field. If given an syntactically incorrect field, the
parser might end up using -1 for the length of the *time fraction*, leading to
a `strlen()` getting performed on a pointer to a heap buffer area that is not
(purposely) null terminated.
This flaw most likely leads to a crash, but can also lead to heap contents
getting returned to the application when
[CURLINFO_CERTINFO](https://curl.se/libcurl/c/CURLINFO_CERTINFO.html) is used. |
| shadow-utils (aka shadow) 4.4 through 4.17.0 establishes a default /etc/subuid behavior (e.g., uid 100000 through 165535 for the first user account) that can realistically conflict with the uids of users defined on locally administered networks, potentially leading to account takeover, e.g., by leveraging newuidmap for access to an NFS home directory (or same-host resources in the case of remote logins by these local network users). NOTE: it may also be argued that system administrators should not have assigned uids, within local networks, that are within the range that can occur in /etc/subuid. |
| gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4_CONN_MSG_LEN is not sufficient for a trailing '\0' character. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: Fix potential invalid memory access in igb_init_module()
The pci_register_driver() can fail and when this happened, the dca_notifier
needs to be unregistered, otherwise the dca_notifier can be called when
igb fails to install, resulting to invalid memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix integer overflow in BLKSECDISCARD
I independently rediscovered
commit 22d24a544b0d49bbcbd61c8c0eaf77d3c9297155
block: fix overflow in blk_ioctl_discard()
but for secure erase.
Same problem:
uint64_t r[2] = {512, 18446744073709551104ULL};
ioctl(fd, BLKSECDISCARD, r);
will enter near infinite loop inside blkdev_issue_secure_erase():
a.out: attempt to access beyond end of device
loop0: rw=5, sector=3399043073, nr_sectors = 1024 limit=2048
bio_check_eod: 3286214 callbacks suppressed |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix pti_clone_pgtable() alignment assumption
Guenter reported dodgy crashes on an i386-nosmp build using GCC-11
that had the form of endless traps until entry stack exhaust and then
#DF from the stack guard.
It turned out that pti_clone_pgtable() had alignment assumptions on
the start address, notably it hard assumes start is PMD aligned. This
is true on x86_64, but very much not true on i386.
These assumptions can cause the end condition to malfunction, leading
to a 'short' clone. Guess what happens when the user mapping has a
short copy of the entry text?
Use the correct increment form for addr to avoid alignment
assumptions. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp_metrics: validate source addr length
I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4
is at least 4 bytes long, and the policy doesn't have an entry
for this attribute at all (neither does it for IPv6 but v6 is
manually validated). |
| In the Linux kernel, the following vulnerability has been resolved:
mm: avoid overflows in dirty throttling logic
The dirty throttling logic is interspersed with assumptions that dirty
limits in PAGE_SIZE units fit into 32-bit (so that various multiplications
fit into 64-bits). If limits end up being larger, we will hit overflows,
possible divisions by 0 etc. Fix these problems by never allowing so
large dirty limits as they have dubious practical value anyway. For
dirty_bytes / dirty_background_bytes interfaces we can just refuse to set
so large limits. For dirty_ratio / dirty_background_ratio it isn't so
simple as the dirty limit is computed from the amount of available memory
which can change due to memory hotplug etc. So when converting dirty
limits from ratios to numbers of pages, we just don't allow the result to
exceed UINT_MAX.
This is root-only triggerable problem which occurs when the operator
sets dirty limits to >16 TB. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.
BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418
Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107
CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc1/0x5e0 mm/kasan/report.c:475
kasan_report+0xbe/0xf0 mm/kasan/report.c:588
strlen+0x7d/0xa0 lib/string.c:418
__fortify_strlen include/linux/fortify-string.h:210 [inline]
in4_pton+0xa3/0x3f0 net/core/utils.c:130
bond_option_arp_ip_targets_set+0xc2/0x910
drivers/net/bonding/bond_options.c:1201
__bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767
__bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792
bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817
bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156
dev_attr_store+0x54/0x80 drivers/base/core.c:2366
sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136
kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x96a/0xd80 fs/read_write.c:584
ksys_write+0x122/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
---[ end trace ]---
Fix it by adding a check of string length before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
The error handling in nilfs_empty_dir() when a directory folio/page read
fails is incorrect, as in the old ext2 implementation, and if the
folio/page cannot be read or nilfs_check_folio() fails, it will falsely
determine the directory as empty and corrupt the file system.
In addition, since nilfs_empty_dir() does not immediately return on a
failed folio/page read, but continues to loop, this can cause a long loop
with I/O if i_size of the directory's inode is also corrupted, causing the
log writer thread to wait and hang, as reported by syzbot.
Fix these issues by making nilfs_empty_dir() immediately return a false
value (0) if it fails to get a directory folio/page. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stk1160: fix bounds checking in stk1160_copy_video()
The subtract in this condition is reversed. The ->length is the length
of the buffer. The ->bytesused is how many bytes we have copied thus
far. When the condition is reversed that means the result of the
subtraction is always negative but since it's unsigned then the result
is a very high positive value. That means the overflow check is never
true.
Additionally, the ->bytesused doesn't actually work for this purpose
because we're not writing to "buf->mem + buf->bytesused". Instead, the
math to calculate the destination where we are writing is a bit
involved. You calculate the number of full lines already written,
multiply by two, skip a line if necessary so that we start on an odd
numbered line, and add the offset into the line.
To fix this buffer overflow, just take the actual destination where we
are writing, if the offset is already out of bounds print an error and
return. Otherwise, write up to buf->length bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
bna: ensure the copied buf is NUL terminated
Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from
userspace to that buffer. Later, we use sscanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using sscanf. Fix this issue by using memdup_user_nul
instead of memdup_user. |
| In the Linux kernel, the following vulnerability has been resolved:
rtnetlink: Correct nested IFLA_VF_VLAN_LIST attribute validation
Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a
struct ifla_vf_vlan_info so the size of such attribute needs to be at least
of sizeof(struct ifla_vf_vlan_info) which is 14 bytes.
The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes)
which is less than sizeof(struct ifla_vf_vlan_info) so this validation
is not enough and a too small attribute might be cast to a
struct ifla_vf_vlan_info, this might result in an out of bands
read access when accessing the saved (casted) entry in ivvl. |
| An issue was discovered in xmllint (from libxml2) before 2.11.8 and 2.12.x before 2.12.7. Formatting error messages with xmllint --htmlout can result in a buffer over-read in xmlHTMLPrintFileContext in xmllint.c. |
| When a protocol selection parameter option disables all protocols without adding any then the default set of protocols would remain in the allowed set due to an error in the logic for removing protocols. The below command would perform a request to curl.se with a plaintext protocol which has been explicitly disabled. curl --proto -all,-http http://curl.se The flaw is only present if the set of selected protocols disables the entire set of available protocols, in itself a command with no practical use and therefore unlikely to be encountered in real situations. The curl security team has thus assessed this to be low severity bug. |
| Exposure of Sensitive Information in Shared Microarchitectural Structures during Transient Execution for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access. |
