| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in GIMP. When processing a specially crafted lighting preset file, the Lighting Effects filter does not properly validate the number of light sources. This can lead to an out-of-bounds write, corrupting memory. An attacker could exploit this by convincing a user to open a malicious preset file, potentially causing a crash or enabling arbitrary code execution. |
| A flaw was found in GIMP's ICO file loader. When processing an ICO file containing an embedded PNG image, an integer overflow can occur during the calculation of the required buffer size. This leads to an undersized buffer being allocated, causing a heap-based buffer overflow when the decoded pixel data is written. A remote attacker could exploit this by crafting a malicious ICO file, which, when opened, could lead to arbitrary code execution or a crash. |
| A maliciously crafted MODEL file, when parsed through certain Autodesk products, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process. |
| A maliciously crafted X_T file, when parsed through certain Autodesk products, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process. |
| ExLlamaV3’s EXL3 loader uses an untrusted, model-supplied index to select a CUDA kernel without first verifying that the index is within bounds. A malicious model can force the code to read and invoke an out‑of‑range function pointer, resulting in a reproducible crash. Under specific conditions involving certain host memory layouts, it may be possible for an attacker to exploit this vulnerability to achieve controlled indirect kernel dispatch during model load. |
| A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames. |
| An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: set up the frame pointer for the exception callback
A program acting as exception boundary saves all callee-saved registers,
so build_prologue() takes the exception_cb path and never calls
push_callee_regs(). That is the only place find_used_callee_regs() runs,
and with it the only place ctx->fp_used is set, so the callback prologue
does not emit the
mov x25, sp
that points BPF_REG_FP at the frame the callback runs on. x25 keeps
whatever it held when bpf_throw() was called. If the throw came from a
subprogram that uses its own BPF stack, that is the subprogram's frame
pointer, and since the subprogram never returns it never restores x25
either.
Stack accesses through BPF_REG_FP are rewritten to be stack pointer
relative, so those still land in the callback's own frame. Materializing
the register does not: a callback that passes the address of a local
variable to a helper hands over an address in the dead subprogram's
frame. That address is below the callback's stack pointer by then, and
the helper's own call chain covers it, so the helper can write over its
own return address. 0x1234 below is the value the helper was asked to
store:
pc : 0x1234
lr : 0x1234
Call trace:
0x1234 (P)
bpf_test_run+0x188/0x3e0
bpf_prog_test_run_skb+0x47c/0x998
__sys_bpf+0xbdc/0xdd8
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Set ctx->fp_used on the exception callback path so that the existing code
further down sets x25 from the stack pointer. The epilogue restores it
from the main program's save area along with the other callee-saved
registers, as it already does. x86 sets the frame pointer for the
callback from the argument it is passed, and powerpc computes it from
the stack pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: keep room for the mac header in dst_dev_overhead()
The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as
the length they are about to push plus dst_dev_overhead(), then push the
new headers and rebuild the mac header below them with
skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom,
but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device,
16 bytes for plain Ethernet.
Where the mac header is longer than that, as it is on ingress through a
VLAN device with reorder_hdr off, the rebuild runs out of room:
skb_set_mac_header(skb, -skb->mac_len) computes a negative offset,
stores it unchecked in the u16 skb->mac_header, and the memmove that
follows writes skb->mac_len bytes about 64 KB past skb->head.
Forwarding plain ping6 traffic through such a device reproduces it on
all five seg6 encapsulation modes and on the rpl and ioam6 inline paths;
skb->mac_header comes back as 65534 on a 704-byte head.
Return the larger of the two. The helper already returns skb->mac_len
when it has no dst, so this only makes the other branch agree, and it
covers every caller rather than each call site in turn. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: do not let ipv6_find_hdr() return an offset past the packet end
ipv6_find_hdr() walks the extension header chain, skipping each header by
the length that header itself declares. ipv6_optlen() returns up to 2048,
and the skip is never checked against skb->len, so the offset stored in
*offset can point past the end of the packet.
openvswitch installs that offset as the transport header, and
update_ipv6_checksum() then reads and writes the transport checksum field
out of bounds:
BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470
Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629
CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348
Call Trace:
inet_proto_csum_replace16+0x445/0x470
set_ipv6_addr+0x3dd/0x460
do_execute_actions+0x6a3d/0x7c40
ovs_execute_actions+0xfd/0x480
ovs_packet_cmd_execute+0xc38/0xf20
genl_rcv_msg+0x59e/0x870
netlink_rcv_skb+0x18b/0x450
genl_rcv+0x2d/0x40
netlink_unicast+0x6bc/0xa20
The buggy address belongs to the object at ffff88810b754980
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 390 bytes inside of
freed 704-byte region [ffff88810b754980, ffff88810b754c40)
Other callers use that offset too, so bound it here rather than in one
caller.
Reject a header whose declared length does not fit in the packet.
ipv6_find_hdr() already fails with -EBADMSG on a malformed chain, so this
adds no new failure mode. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix wild memcpy access when formatting ondisk rtrefcount btree roots
LOLLM noticed that the inode btree root formatting methods copy too many
bytes -- there's only one set of keys in node blocks, not two. This
causes memory corruption of whatever's beyond the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: bound TX aggregation to MAX_TX_BUF_SIZE
__hif_usb_tx() dequeues up to MAX_TX_AGGR_NUM (20) frames into a
single tx_buf of MAX_TX_BUF_SIZE (32768) bytes, limiting the batch
by record count but never by cumulative byte length.
With large frames (MTU 2304), 20 aggregated frames of 2292 bytes
each exceed the allocation (20 * 2296 = 45920 bytes), so the
memcpy() in the loop writes up to 13152 bytes past tx_buf->buf
before usb_submit_urb().
Peek the queue head and stop before copying any record that would
cross MAX_TX_BUF_SIZE, then dispatch the current batch. Leftover
skbs remain queued and are drained on the next URB completion.
The byte bound changes the loop's exit semantics: it can now exit
before i == tx_skb_cnt - 1. Stock only finalized tx_buf->len on
that last index (len += offset), so an early break would submit a
URB holding only the last record's length while every dequeued skb
is freed on completion, silently dropping frames. Make tx_buf->len
a running total and advance tx_buf->offset per record instead; the
stride round_up(nskb->len + 4, 4) is identical to the stock stride
when the loop runs to completion.
Tested on hardware with an MTU 2304 flood: the loop stops at
record 15 (len = 32144, offset = 32144, within 32768), no
oversized URB is submitted, and MTU 1500 pings pass 20/20. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: ensure packet data is writable before modifying SRH and IPv6 DA
advance_nextseg() modifies the SRH Segments Left field and the IPv6
destination address without ensuring the packet data is writable.
seg6_next_csid_advance_arg() has the same problem when it advances the
NEXT-C-SID argument in the destination address.
The skb may be cloned, for example by an AF_PACKET socket receiving on
the ingress device. advance_nextseg() and seg6_next_csid_advance_arg()
then write into the packet data shared with the clone. A read from that
socket can return the modified packet instead of the received one. The
simplified path below shows this for advance_nextseg():
__netif_receive_skb_one_core
__netif_receive_skb_core
deliver_skb [orig: users=2, cloned=0]
packet_rcv
skb_clone clone queued to the AF_PACKET socket
consume_skb(orig) [orig: users=1, cloned=1]
ipv6_rcv
ip6_rcv_core skb_share_check: no-op [orig: users=1]
[...]
input_action_end_core
advance_nextseg writes into the data shared with the clone
Call skb_ensure_writable() in advance_nextseg() and in
seg6_next_csid_advance_arg() before they modify the packet data.
skb_ensure_writable() may reallocate skb->head, which invalidates the
pointers into the packet data taken before the call.
advance_nextseg() now returns a valid SRH pointer, or NULL if
skb_ensure_writable() fails.
seg6_next_csid_advance_arg() takes the pointer to the destination
address from the skb after skb_ensure_writable().
On failure, the callers drop the packet with SKB_DROP_REASON_NOMEM. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate TX status rate metadata
minstrel_ht_tx_status() converts the HT/VHT rate reported in a TX status
into a group and rate index and uses those to index the minstrel_ht rate
tables. The existing validation only checked that an entry was present
and had tries recorded; it did not check that the reported MCS, spatial
stream count and bandwidth are representable by the tables, so malformed
metadata passed to minstrel_ht_get_stats() or
minstrel_ht_ri_get_stats() could be used as an out-of-bounds index.
Validate the rate metadata in the common TX status path instead of only
in minstrel_ht, since the values are used by more than rate control.
The legacy ieee80211_tx_rate array and the rate_info based entries are
sanitized in ieee80211_tx_status_ext() and ieee80211_tx_rate_update()
before any consumer runs: an entry that does not describe a valid rate
for its encoding is dropped. minstrel_ht keeps the checks that depend
on its own tables, i.e. the supported number of spatial streams, the MCS
group size and the supported bandwidths.
This does not take away the driver's responsibility to report sane
values, it only prevents a single bad report from corrupting mac80211
state. No WARN_ON() is added: with panic_on_warn a driver bug would
otherwise turn into a denial of service. |
| A flaw was found in xorg-x11-server. A local authenticated client can exploit this flaw by sending a crafted input device ungrab request with an unvalidated modifier value. This lack of validation causes the server to perform an out-of-bounds write on the heap, resulting in memory corruption that can lead to a denial of service (DoS) or potential arbitrary code execution. |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Out-of-bounds write vulnerability in Hitachi Disk Array Driver for AIX and Hitachi Disk Array Driver for Virtual I/O Server.
This issue affects Hitachi Disk Array Driver for AIX: from 01-00 before 01-23-/A; Hitachi Disk Array Driver for Virtual I/O Server: from 01-04 before 01-23-/A. |
| A flaw was found in DPDK lib/vhost vhost-crypto. A guest can supply an avail-ring descriptor index that is used without bounds checking, causing an out-of-bounds write in the host vhost-crypto backend. |
| vLLM before 0.29.0 passes uploaded audio to the PyAV/FFmpeg av.open() fallback with only a file-size check, exposing FFmpeg's IAMF parser heap overflow. Authenticated remote attackers can repeatedly upload malformed IAMF containers to /v1/audio/transcriptions, corrupting the heap and crashing the API process. |
| FreeRDP 3.10.0 through 3.32.2 contains a heap buffer overflow in the WinPR png_write_data callback that writes past the buffer after a realloc failure. A malicious RDP clipboard peer can supply a large CF_DIB image that triggers out-of-bounds memcpy during PNG conversion, causing a client crash. |
