| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| cc-connect through 1.5.0 contains a missing authentication vulnerability in the MAX platform adapter webhook mode in platform/max/max.go that accepts unauthenticated updates when no webhook_secret is configured. Remote attackers reaching the webhook listener on port 8080 can forge updates with an allowed or admin user_id to run privileged commands like /shell on the host. |
| An endpoint used during initial appliance setup did not require authentication and did not correctly enforce its intended state precondition, so during the initial activation window an unauthenticated network attacker could repeatedly re-trigger the privileged activation process. This could disrupt setup and leave the appliance in an incompletely configured state. The issue is only reachable while an appliance is being activated for the first time and not yet fully configured. |
| An unauthenticated attacker could cause a file with attacker-controlled content to be written to the appliance filesystem through an administrative upload handler that did not properly authenticate the request. This did not by itself result in code execution, which would require a separate vulnerability to place the file in an executable location. |
| A vulnerability has been identified in LOGO! 12/24RCE (6ED1052-1MD08-0BA2) (All versions < V1.84.05), LOGO! 12/24RCEo (6ED1052-2MD08-0BA2) (All versions < V1.84.05), LOGO! 230RCE (6ED1052-1FB08-0BA2) (All versions < V1.84.05), LOGO! 230RCEo (6ED1052-2FB08-0BA2) (All versions < V1.84.05), LOGO! 24CE (6ED1052-1CC08-0BA2) (All versions < V1.84.05), LOGO! 24CEo (6ED1052-2CC08-0BA2) (All versions < V1.84.05), LOGO! 24RCE (6ED1052-1HB08-0BA2) (All versions < V1.84.05), LOGO! 24RCEo (6ED1052-2HB08-0BA2) (All versions < V1.84.05), SIPLUS LOGO! 12/24RCE (6AG1052-1MD08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 12/24RCEo (6AG1052-2MD08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 230RCE (6AG1052-1FB08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 230RCEo (6AG1052-2FB08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 24CE (6AG1052-1CC08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 24CEo (6AG1052-2CC08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 24RCE (6AG1052-1HB08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 24RCEo (6AG1052-2HB08-7BA2) (All versions < V1.84.05). Affected devices do not conduct certain validations when interacting with them. This could allow an unauthenticated remote attacker to change time of the device, which means the device could behave differently. |
| A vulnerability has been identified in LOGO! 12/24RCE (6ED1052-1MD08-0BA2) (All versions < V1.84.05), LOGO! 12/24RCEo (6ED1052-2MD08-0BA2) (All versions < V1.84.05), LOGO! 230RCE (6ED1052-1FB08-0BA2) (All versions < V1.84.05), LOGO! 230RCEo (6ED1052-2FB08-0BA2) (All versions < V1.84.05), LOGO! 24CE (6ED1052-1CC08-0BA2) (All versions < V1.84.05), LOGO! 24CEo (6ED1052-2CC08-0BA2) (All versions < V1.84.05), LOGO! 24RCE (6ED1052-1HB08-0BA2) (All versions < V1.84.05), LOGO! 24RCEo (6ED1052-2HB08-0BA2) (All versions < V1.84.05), SIPLUS LOGO! 12/24RCE (6AG1052-1MD08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 12/24RCEo (6AG1052-2MD08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 230RCE (6AG1052-1FB08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 230RCEo (6AG1052-2FB08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 24CE (6AG1052-1CC08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 24CEo (6AG1052-2CC08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 24RCE (6AG1052-1HB08-7BA2) (All versions < V1.84.05), SIPLUS LOGO! 24RCEo (6AG1052-2HB08-7BA2) (All versions < V1.84.05). Affected devices do not conduct certain validations when interacting with them. This could allow an unauthenticated remote attacker to manipulate the devices IP address, which means the device would not be reachable. |
| Fire-Boltt BSW013 smartwatch firmware through V0.0.8 contains a missing authentication vulnerability that allows unpaired BLE devices to subscribe to the Heart Rate Measurement characteristic (0x2A37). Attackers within Bluetooth range can receive the wearer's live heart rate readings without pairing, bonding, or any confirmation on the watch. |
| VideoLAN VLC for Android prior to version 3.7.0 contains an authentication bypass in the Remote Access Server feature due to missing or insufficient rate limiting on one-time password (OTP) verification. The Remote Access Server uses a 4-digit OTP and does not enforce effective throttling or lockout within the OTP validity window, allowing an attacker with network reachability to the server to repeatedly attempt OTP verification until a valid user_session cookie is issued. Successful exploitation results in unauthorized access to the Remote Access interface, limited to media files explicitly shared by the VLC for Android user. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Updates Environment Management). Supported versions that are affected are 8.61 and 8.62. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| In Progress ShareFile Storage Zones Controller v5.12.6 and below, improper validation of outbound request destinations and parameters, unsafe JSONP response formatting, and insufficient validation on queue service can be chained by a remote unauthenticated attacker to issue server-side requests to unintended local handlers and perform unauthorized queue operations. |
| Denver SHO-110 IP cameras expose a secondary HTTP service on TCP port 8001 that provides access to a '/snapshot' endpoint without authentication. While the primary web interface on port 80 enforces authentication, the backdoor service allows any remote attacker to retrieve image snapshots by directly requesting the 'snapshot' endpoint. An attacker can repeatedly collect snapshots and reconstruct the camera stream, compromising the confidentiality of the monitored environment. |
| DJI drones expose an unauthenticated DUML command interface over Bluetooth that allows an attacker within Bluetooth range to modify Wi-Fi configuration parameters, including the SSID, PSK, MAC address, regulatory country code, and wireless channel. An attacker can overwrite the Wi-Fi PSK with a known value and connect to the drone's internal Wi-Fi network, potentially gaining access to the flight control interface and issuing flight commands. Crafted DUML commands can also disable or restart the Wi-Fi and Bluetooth interfaces, disconnect Wi-Fi clients, or reset wireless configuration, resulting in a denial-of-service condition that can disrupt the operator's wireless control, video, and telemetry connections during flight.
Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600.
Remediation requires a firmware update from the vendor. |
| A vulnerability was identified in agno-agi agno up to 2.7.3/3.0.6. This affects the function get_authentication_dependency of the file auth.py. Such manipulation of the argument security_key leads to missing authentication. The attack may be launched remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| The STTP-based data publisher on openPDC accepts network connections without authentication in its default configuration. An unauthenticated network attacker can connect to this interface and exchange data with it. |
| SNMP can be used to perform administrative actions such as retrieving configuration files, modifying user accounts or device settings, and initiating firmware or bootloader upgrades or downgrades—all without any authentication. |
| The internal data publisher on openPDC accepts network connections without authentication in its default configuration. An unauthenticated network attacker can connect to this interface and retrieve the complete device and measurement topology of the system. |
| PHPNuxBill through 2025.3.20 contains an account takeover vulnerability in the customer password reset flow in system/controllers/forgot.php that allows unauthenticated attackers to brute-force the 6-digit otp_code. Attackers knowing a customer username can guess the code without attempt limits or lockout, then read the newly set password from the HTTP response to hijack the account. |
| IBM Guardium Data Protection 12.1 and 12.2.2 are vulnerable to missing authentication in the edge-controller component. An unauthenticated remote attacker could exploit this vulnerability to execute arbitrary container images and gain control of managed edge clusters. |
| IBM Guardium Data Protection 12.2, and 12.2.2 could allow a remote attacker to execute arbitrary management operations due to missing authentication for critical function. |
| Homer is open source telecom observability software. Prior to version 11.0.283, both JWT middleware functions (`JWTMiddleware` and `JWTMiddlewareV4`) immediately return `next(c)` when `jwtSecret == ""`. The JWT secret defaults to an empty string. On a default installation, all protected API endpoints under `/api/v1`, `/api/v3`, and `/api/v4` are completely unauthenticated. Version 11.0.283 patches the issue. |
| The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. Prior to 3.0.13 and 2.16.1, Realm.Builder treats a Digest challenge that yields no usable nonce as a Basic challenge. A malicious origin or proxy can label a challenge Digest while omitting or emptying the nonce, causing the client to resend the username and password using reversible Basic authentication. Both origin and proxy challenge parsers are affected. This issue is fixed in versions 3.0.13 and 2.16.1. |
