| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: diag: reject stale associations in dump_one path
The SCTP exact sock_diag lookup can hold a transport reference, block on
lock_sock(sk), and then resume after sctp_association_free() has marked
the association dead and freed its bind address list.
When that happens, inet_assoc_attr_size() and
inet_diag_msg_sctpasoc_fill() can still dereference association state
that is no longer valid for reporting. In particular,
inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a
real sctp_sockaddr_entry and trigger an out-of-bounds read from
unrelated association memory.
Reject the association after taking the socket lock if it has been
reaped or detached from the endpoint, and report the lookup as stale.
This keeps the exact dump-one path from formatting torn association
state. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE
core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT
parameter list with transport_kmap_data_sg() and parses the destination
TransportID with target_parse_pr_out_transport_id(). For an iSCSI
TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns
the ISID in iport_ptr as a raw pointer into that mapped buffer.
The function then unmaps the buffer with transport_kunmap_data_sg() before
dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and
core_scsi3_alloc_registration(). When the parameter list spans more than
one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses
vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual
address backing iport_ptr is torn down and every subsequent dereference is
a use-after-free read of the unmapped region.
Keep the parameter list mapped until iport_ptr is no longer needed: drop
the early transport_kunmap_data_sg() and unmap once on the success path,
right before returning. The error paths already unmap through the existing
"if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs
on every post-map error exit because buf is no longer cleared early. Only
reads of the mapping happen while spinlocks are held; the map and unmap
calls remain outside any lock. The sibling caller
core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it
and is left unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix use-after-free during unmount
During unmount or failure teardown all mon_data structures that contain
monitoring event file private data are freed after which kernfs nodes are
removed. However, the RDT_DELETED flag is never set for the statically
allocated default resource group.
A concurrent reader of an event file associated with the default resource
group may, after dropping kernfs active protection, block on rdtgroup_mutex
while unmount proceeds to free the file private data and destroy the kernfs
node without waiting for the reader.
When the mutex is released, the reader wakes up, observes that RDT_DELETED
is not set for the default group, and dereferences the already-freed
file private data.
The scenario can be depicted as follows:
CPU0 CPU1
/*
* Default resource group's
* monitoring data accessible via
* kernfs file with kernfs_node::priv
* pointing to a struct mon_data.
* User opens the file for reading.
*/
rdtgroup_mondata_show() /* arch encounters fatal error */
rdtgroup_kn_lock_live() resctrl_exit()
atomic_inc(&rdtgroup_default.waitcount) cpus_read_lock()
kernfs_break_active_protection(kn) mutex_lock(&rdtgroup_mutex)
cpus_read_lock() resctrl_fs_teardown()
mutex_lock(&rdtgroup_mutex) rmdir_all_sub()
mon_put_kn_priv()
/* Delete all mon_data structures */
rdtgroup_destroy_root()
kernfs_destroy_root()
rdtgroup_default.kn = NULL
mutex_unlock(&rdtgroup_mutex)
/*
* rdtgroup_default.flags is empty so
* rdtgroup_kn_lock_live() returns
* &rdtgroup_default
*/
md = of->kn->priv;
/* md points to freed mon_data */
Set RDT_DELETED for the default group unconditionally since the flag does
not lead to the freeing of this statically allocated group.
Do not allow a new resctrl mount if there are any waiters on default group
of previous mount. A new mount will re-initialize the default group that
would appear to waiters from previous mount as though the default group is
accessible causing them to access the mon_data structures from the previous
mount that have been removed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: macsec: fix use-after-free of metadata_dst on RX SC delete
When an offloaded MACsec RX SC is deleted, macsec_del_rxsc_ctx() freed
the per-SC metadata_dst with metadata_dst_free(), which kfree()s the
object unconditionally and ignores the dst reference count. The RX
datapath in mlx5e_macsec_offload_handle_rx_skb() looks up the SC under
rcu_read_lock() via xa_load(), takes a reference with dst_hold() and
attaches the dst to the skb with skb_dst_set(). A reader that already
obtained the rx_sc pointer can race with the delete path and operate on
freed memory.
Fix the owner side by dropping the reference with dst_release() instead
of freeing unconditionally, and convert the RX datapath to
dst_hold_safe() so a reader racing the SC delete cannot attach a dst
whose last reference was just dropped; only attach it when a reference
was actually taken.
mlx5e_macsec_add_rxsc() also published sc_xarray_element via xa_alloc()
before rx_sc->md_dst was allocated and initialised, so a datapath reader
that looked the SC up by fs_id could observe rx_sc with md_dst still
NULL or, on weakly-ordered architectures, a non-NULL md_dst pointer
whose contents were not yet visible. NULL-check the xa_load() result and
md_dst on the datapath, and reorder add_rxsc() so the xa_alloc() publish
happens only after md_dst is fully initialised; the xarray RCU publish
then pairs with the rcu_read_lock()/xa_load() in the datapath.
Note: macsec_del_rxsc_ctx() also kfree()s rx_sc->sc_xarray_element
without an RCU grace period while the same datapath reads it under
rcu_read_lock(); that is a separate pre-existing issue left to a
follow-up patch.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
locking/rt: Fix the incorrect RCU protection in rt_spin_unlock()
rt_spin_unlock() releases the RCU protection before unlocking the
lock. That opens the door for the following UAF scenario:
T1 T2
spin_lock(&p->lock); rcu_read_lock();
invalidate(p); p = rcu_dereference(ptr);
rcu_assign_pointer(ptr, NULL); if (!p) return;
spin_unlock(&p->lock); spin_lock(&p->lock)
lock(&lock->lock);
rcu_read_lock();
kfree_rcu(p); rcu_read_unlock();
....
spin_unlock(&p->lock)
rcu_read_unlock(); // Ends grace period
rcu_do_batch()
kfree(p);
UAF -> rt_mutex_cmpxchg_release(&lock->lock...)
Regular spinlocks keep preemption disabled accross the unlock operation,
which provides full RCU protection, but the RT substitution fails to
resemble that. Same applies for the rwlock substitution.
Move the rcu_read_unlock() invocation past the unlock operations to match
the non-RT semantics. This makes it asymmetric vs. rt_xxx_lock(), but
that's harmless as the caller needs to hold RCU read lock across the lock
operation. The migrate_enable() call stays before the unlock operation
because there is no per CPU operation in the unlock path which would
require migration to be kept disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: remove interfaces with RCU list deletion
Queue wake, stop, and disable paths walk local->interfaces under RCU.
The bulk hardware teardown path removes entries with list_del(), so an
asynchronous transmit completion can follow a poisoned list node in
ieee802154_wake_queue().
Use list_del_rcu() as in the single-interface removal path. The following
unregister_netdevice() waits for in-flight RCU readers before freeing the
netdevice, so no separate grace-period wait is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/osnoise: Call synchronize_rcu() when unregistering
This ensures that any RCU readers traversing the instance list
have finished, before releasing the reference on the tracer that
the instance points to. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't propagate EXTENT_FLAG_LOGGING to split extent maps
When btrfs_drop_extent_map_range() splits an extent map, the new split
maps inherit the original map's flags through a local 'flags' variable.
Commit f86f7a75e2fb ("btrfs: use the flags of an extent map to identify
the compression type") changed the EXTENT_FLAG_LOGGING clearing to
operate on em->flags instead of that local 'flags' copy, so a split of
an extent map that is currently being logged wrongly inherits
EXTENT_FLAG_LOGGING.
The flag is then never cleared on the split, and when it is freed while
still on the inode's modified_extents list (for example by the extent
map shrinker) it trips the WARN_ON(!list_empty(&em->list)) in
btrfs_free_extent_map() and leads to a use-after-free.
Clear EXTENT_FLAG_LOGGING from the local 'flags' copy used for the
splits and only clear EXTENT_FLAG_PINNED from em->flags, restoring the
behaviour prior to f86f7a75e2fb. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix use-after-free in host1x_bo_clear_cached_mappings
__host1x_bo_unpin() drops the last reference to the mapping and frees
it, so we can't dereference mapping afterwards. The cache itself
outlives the mapping, so use the cache local variable instead. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel sched scan results work on unregister
cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a
driver result notification while a scheduled scan request is present. The
work callback recovers the containing cfg80211_registered_device and then
locks the wiphy and walks the scheduled-scan request list.
wiphy_unregister() already makes the wiphy unreachable and drains rdev work
items before cfg80211_dev_free() can release the object, but it does not
drain sched_scan_res_wk. A queued or running result work item can therefore
cross the unregister/free boundary and access freed rdev state.
The buggy scenario involves two paths, with each column showing the order
within that path:
scheduled-scan result path: unregister/free path:
1. cfg80211_sched_scan_results() 1. interface teardown stops and
queues rdev->sched_scan_res_wk. removes the scheduled scan request.
2. cfg80211_wq starts the work 2. wiphy_unregister() drains other
item and recovers rdev. rdev work items.
3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and
and walks rdev state. frees rdev.
Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdev
work items. cancel_work_sync() removes a pending result notification and
waits for an already running callback, so cfg80211_dev_free() cannot free
rdev while this work item is still active.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530
Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211]
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
cfg80211_sched_scan_results_wk+0x4a6/0x530
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x224/0x430
kasan_report+0xac/0xe0
lockdep_hardirqs_on_prepare+0xea/0x1a0
process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212)
lock_is_held_type+0x8f/0x100
worker_thread+0x5ad/0xfd0
__kthread_parkme+0xc6/0x200
kthread+0x31e/0x410
trace_hardirqs_on+0x1a/0x170
ret_from_fork+0x576/0x810
__switch_to+0x57e/0xe20
__switch_to_asm+0x33/0x70
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: defer channel free to an RCU grace period to fix pppol2tp RX UAF
pppol2tp_recv() runs in the L2TP UDP-encap softirq RX path:
l2tp_udp_encap_recv() -> l2tp_recv_common() -> pppol2tp_recv()
-> ppp_input(&po->chan)
It runs under rcu_read_lock() holding only an l2tp_session reference and
takes NO reference on the internal PPP channel (struct channel,
chan->ppp) that ppp_input() dereferences.
The pppox socket is SOCK_RCU_FREE, so 'po' and the embedded ppp_channel
are RCU-safe. But the internal struct channel is a separate allocation
that ppp_release_channel() frees with a plain kfree():
close(data socket) -> pppol2tp_release() -> pppox_unbind_sock()
-> ppp_unregister_channel() -> ppp_release_channel() -> kfree(pch)
For a channel that is bound (PPPIOCGCHAN) but not attached to a ppp unit
(no PPPIOCCONNECT, pch->ppp == NULL) and not bridged, teardown skips
both ppp_disconnect_channel()'s synchronize_net() and
ppp_unbridge_channels()'s synchronize_rcu(), so the kfree() has no grace
period. rcu_read_lock() in pppol2tp_recv() does not protect against a
plain kfree(), so an in-flight ppp_input() on one CPU can dereference
the channel just freed by close() on another CPU.
The bug is reachable by an unprivileged user.
Defer the channel free to an RCU callback via call_rcu() so the grace
period fences any in-flight ppp_input(). The disconnect and unbridge
teardown paths already fence with synchronize_net()/synchronize_rcu();
call_rcu() does the same here without stalling the close() path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: take a reference on the socket found in afiucv_hs_rcv()
afiucv_hs_rcv() looks up the destination socket under iucv_sk_list.lock,
drops the lock, and then passes the socket to the afiucv_hs_callback_*()
handlers without holding a reference. AF_IUCV sockets are not
RCU-protected and are freed synchronously by iucv_sock_kill() ->
sock_put(), so a concurrent close can free the socket in the window
between read_unlock() and the handler, which then dereferences freed
memory (for example sk->sk_data_ready() in afiucv_hs_callback_syn()).
Take a reference with sock_hold() while the socket is still on the list
and release it with sock_put() once the handler has run. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: revalidate LOAD_CONN_PARAM queued update
MGMT_OP_LOAD_CONN_PARAM queues conn_update_sync() when a single parameter
update changes an existing LE central connection. The queued work currently
stores a borrowed hci_conn_params entry from hdev->le_conn_params. A later
LOAD_CONN_PARAM request can clear disabled parameters and free that entry
before hci_cmd_sync_work() runs the queued callback.
Do not keep the borrowed hci_conn_params pointer in queued work. Queue the
hci_conn instead and hold a reference until the queued callback completes.
When the work runs, revalidate that the connection is still present, look
up the current hci_conn_params entry, and cancel the update if userspace
removed that entry while the work was pending.
Copy the interval values from the current params entry under hdev->lock,
then drop the lock and keep using hci_le_conn_update_sync() to issue the
update.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in conn_update_sync+0x2a/0xf0 [bluetooth]
Read of size 1 at addr ffff88810c697126 by task kworker/u17:0/377
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
kasan_report+0xe0/0x110
conn_update_sync+0x2a/0xf0 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Allocated by task 466:
hci_conn_params_add+0xa6/0x240 [bluetooth]
load_conn_param+0x4e1/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
Freed by task 474:
kfree+0x313/0x590
hci_conn_params_clear_disabled+0x9b/0xc0 [bluetooth]
load_conn_param+0x4bf/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth] |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_tunnel_key: Defer dst_release to RCU callback
Fix a race-condition use-after-free in tunnel_key_release_params().
The function releases the metadata_dst of the old params synchronously
via dst_release() while deferring the params struct free with
kfree_rcu(). A concurrent tunnel_key_act() reader on the datapath may
still hold the old params pointer (under rcu_read_lock_bh) and proceed
to call dst_clone(¶ms->tcft_enc_metadata->dst) after the writer's
dst_release has already pushed the dst's rcuref to RCUREF_DEAD.
zdi-disclosures@trendmicro.com produced a poc which i (and Victor) verified
that KASAN reports:
==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112
BUG: KASAN: slab-use-after-free in atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326
BUG: KASAN: slab-use-after-free in __rcuref_put include/linux/rcuref.h:109
BUG: KASAN: slab-use-after-free in rcuref_put include/linux/rcuref.h:173
BUG: KASAN: slab-use-after-free in dst_release+0x5b/0x370 net/core/dst.c:168
Write of size 4 at addr ffff88806158de40 by task poc/9388
CPU: 0 UID: 0 PID: 9388 Comm: poc Tainted: G W 7.1.0-rc7 #7 PREEMPT(lazy)
Tainted: [W]=WARN
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378
print_report+0x139/0x4ad mm/kasan/report.c:482
kasan_report+0xe4/0x1d0 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:186
kasan_check_range+0x125/0x200 mm/kasan/generic.c:200
instrument_atomic_read_write include/linux/instrumented.h:112
atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326
__rcuref_put include/linux/rcuref.h:109
rcuref_put include/linux/rcuref.h:173
dst_release+0x5b/0x370 net/core/dst.c:168
refdst_drop include/net/dst.h:272
skb_dst_drop include/net/dst.h:284
skb_release_head_state+0x293/0x400 net/core/skbuff.c:1163
skb_release_all net/core/skbuff.c:1187
[..]
Allocated by task 9391:
kasan_save_stack+0x30/0x50 mm/kasan/common.c:57
kasan_save_track+0x14/0x30 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398
__kasan_kmalloc+0x9a/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263
__do_kmalloc_node mm/slub.c:5296
__kmalloc_noprof+0x2f1/0x830 mm/slub.c:5308
kmalloc_noprof include/linux/slab.h:954
kzalloc_noprof include/linux/slab.h:1188
offload_action_alloc+0x2f/0x130 net/core/flow_offload.c:35
tcf_action_offload_add_ex+0x1ba/0x880 net/sched/act_api.c:258
tcf_action_offload_add net/sched/act_api.c:293
tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547
tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101
[..]
Freed by task 9391:
kasan_save_stack+0x30/0x50 mm/kasan/common.c:57
kasan_save_track+0x14/0x30 mm/kasan/common.c:78
kasan_save_free_info+0x3b/0x70 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253
__kasan_slab_free+0x6b/0x90 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235
slab_free_hook mm/slub.c:2689
slab_free mm/slub.c:6251
kfree+0x21f/0x6b0 mm/slub.c:6566
tcf_action_offload_add_ex+0x4ad/0x880 net/sched/act_api.c:284
tcf_action_offload_add net/sched/act_api.c:293
tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547
tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101
The buggy address belongs to the object at ffff88806158de00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 64 bytes inside of
freed 256-byte region [ffff88806158de00, ffff88806158df00)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88806158d600 pfn:0x6158c
head: order:1 mapcount:0 entire_map
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: sysfs: add lock to bos_descriptors_read()
Add a lock to the function bos_descriptors_read().
This function accesses udev->bos, which could be simultaneously freed in
usb_reset_and_verify_device(), a function that is commonly called in
drivers all over the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: drop incoming messages that cross network namespace boundaries
rds_find_bound() looks up the destination socket using a global
rhashtable keyed solely on (addr, port, scope_id). Network namespaces
are not part of the key, so a sender in netns A can deliver an incoming
message (inc) to a socket that lives in a different netns B.
When this happens, inc->i_conn points to an rds_connection whose c_net
is netns A, but the receiving rs lives in netns B. Once the child
process that created netns A exits, cleanup_net() calls
rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(),
freeing that connection. If the survivor socket in netns B still holds
the inc, any subsequent dereference of inc->i_conn is a use-after-free.
There are two dangerous sites in rds_clear_recv_queue():
1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200)
read via rds_recv_rcvbuf_delta() -- confirmed by KASAN.
2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80)
called via rds_inc_put() when the inc refcount reaches zero -- same
race window, potential call-through-freed-object primitive.
The bug is reachable from unprivileged user namespaces
(CLONE_NEWUSER + CLONE_NEWNET), available since Linux 3.8.
Fix this by rejecting the delivery in rds_recv_incoming() when the
socket returned by rds_find_bound() belongs to a different network
namespace than the connection that carried the message. Use the
existing rds_conn_net() / sock_net() helpers and net_eq() for the
comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: tcp: unregister sysctl before tearing down listen socket
rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via
rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since
rds_tcp_skbuf_handler() derives the netns from
rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with
netns teardown and dereference the freed socket/sk.
KASAN reports the race as:
BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0
rds_tcp_skbuf_handler net/rds/tcp.c:721
proc_sys_call_handler fs/proc/proc_sysctl.c
vfs_write fs/read_write.c
__x64_sys_pwrite64 fs/read_write.c
Fix this by unregistering the RDS TCP sysctl table before calling
rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl
handlers from starting and waits for in-flight handlers to finish, so
the listen socket can then be released safely. The fix was tested
against the linked reproducer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which
drops and reacquires the socket lock. Its error path tries to decide
whether msg_tx names the local temporary message by comparing it with
the current value of psock->cork.
This comparison is unsafe when two threads send on the same socket:
Thread A Thread B
msg_tx = psock->cork
sk_msg_alloc() fails
sk_stream_wait_memory()
releases the socket lock acquires the socket lock
completes the cork
psock->cork = NULL
frees the cork
reacquires the socket lock
msg_tx != psock->cork
sk_msg_free(msg_tx)
The stale cork is therefore mistaken for the local temporary message
and freed again. KASAN reported:
BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50
Read of size 4 at addr ffff88810c908800 by task poc/90
Call Trace:
sk_msg_free+0x49/0x50
tcp_bpf_sendmsg+0x14f5/0x1cc0
__sys_sendto+0x32c/0x3a0
__x64_sys_sendto+0xdb/0x1b0
Allocated by task 89:
__kasan_kmalloc+0x8f/0xa0
tcp_bpf_sendmsg+0x16b3/0x1cc0
Freed by task 91:
__kasan_slab_free+0x43/0x70
kfree+0x131/0x3c0
tcp_bpf_sendmsg+0xec3/0x1cc0
msg_tx can only name the stack-local tmp or the shared cork. Check for
tmp directly so a changed psock->cork cannot turn a shared message into
an apparent local one. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Hold a dma-buf reference for imported BOs
An imported dma-buf BO is created as a ttm_bo_type_sg BO whose
reservation object is the exporter's dma_buf->resv. The importer,
however, only takes a dma-buf reference after a successful
dma_buf_dynamic_attach(). Until then nothing keeps the exporter alive,
so if the exporter is freed while the BO still references its resv, a
later access to that resv is a use-after-free:
Oops: general protection fault, probably for non-canonical address
0x6b6b6b6b6b6b6b9c
Workqueue: ttm ttm_bo_delayed_delete [ttm]
RIP: 0010:mutex_can_spin_on_owner+0x3f/0xc0
This can be reached on two paths:
- dma_buf_dynamic_attach() fails, or
- ttm_bo_init_reserved() fails during BO creation.
In both cases the BO already has bo->base.resv pointing at the exporter
resv, and sg BOs are always torn down via ttm_bo_delayed_delete(), which
locks bo->base.resv asynchronously - potentially after the exporter has
been freed.
Take the dma-buf reference in xe_bo_init_locked(), before
ttm_bo_init_reserved(), so it also covers a creation failure there, and
release it in xe_ttm_bo_destroy(). The reference is held for the whole
BO lifetime, keeping the shared resv alive on every path.
v2:
- Reworked the fix to avoid creating the imported sg BO before
dma_buf_dynamic_attach() succeeds.
- Attach with importer_priv == NULL and make invalidate_mappings ignore
incomplete imports.
v3:
- Dropped the xe-side reordering approach since importer_priv must be
valid when dma_buf_dynamic_attach() publishes the attachment.
- Per Christian's suggestion on the v1 thread, keyed the check on
import_attach rather than removing the sg guard entirely.
- Fixes both xe and amdgpu in a single TTM patch.
v4:
- Moved import_attach check to after dma_resv_copy_fences() so fences
are copied before returning for successful imports (Thomas).
- Removed exporter-alive claim from commit message (Thomas).
v5:
- Add drm/xe patch to keep imported sg BOs off the LRU before attach
succeeds; the TTM fix alone is not sufficient for xe if the BO is
already LRU-visible. (Thomas)
v4 patch:
https://patchwork.freedesktop.org/patch/736663/?series=169129&rev=2
- Patch 1 (drm/ttm) carries Christian's Reviewed-by from v4.
v6:
- Reworked the fix based on Thomas' suggestion. Instead of the TTM resv
individualization (v1-v5) plus the xe off-LRU/placement handling (v5),
just hold a dma-buf reference for the imported BO lifetime so the
shared resv can never be freed while the BO still references it.
Single xe patch, no TTM change. (Thomas)
- Take the reference in xe_bo_init_locked() before ttm_bo_init_reserved()
so a TTM creation failure is covered too (Thomas).
- Dropped the v5 series (drm/ttm + drm/xe off-LRU); the off-LRU approach
also regressed in CI BAT via ttm_bo_pipeline_gutting() creating a ghost
BO that outlived the exporter.
Link to v5: https://patchwork.freedesktop.org/series/169984/
v7:
- Move changelog above --- so it stays in the commit message.
- Reorder changelog entries oldest-to-newest. (Thomas)
(cherry picked from commit 3516f3fae6be35642f8f06f8a218da6425c0306a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix lifetime issue of amdgpu_vm_get_task_info_pasid()
The vm pointer returned from amdgpu_vm_get_vm_from_pasid() is only
valid while the lock is still being held. Once xa_unlock_irqrestore is
called and returned, the pointer is no longer under lock and is subject
to modification. Since, the caller still dereferences vm->task_info in
amdgpu_vm_get_task_info_vm() after the lock is removed, this causes a
use after unlock problem.
Remove the lifetime issue present in amdgpu_vm_get_task_info_pasid()
through removing the amdgpu_vm_get_vm_from_pasid() function from
amdgpu_vm.c and making the relevant code inline to hold the lock while
it is still in use.
(cherry picked from commit 9d01579f3f868b333acc901815972685989092c7) |
