| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was detected in subhajitkhan online-clinic-management-system up to e9ee77a8827a1446220fa07ee693dc4d9a29a578. This issue affects some unknown processing of the file patappointtime.php of the component Booking Handler. The manipulation results in enforcement of behavioral workflow. It is possible to launch the attack remotely. The exploit is now public and may be used. The patch is identified as e9ee77a8827a1446220fa07ee693dc4d9a29a578. It is advisable to implement a patch to correct this issue. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Always use NextRIP as vmcb02's NextRIP after first L2 VMRUN
For guests with NRIPS disabled, L1 does not provide NextRIP when running
an L2 with an injected soft interrupt, instead it advances the current RIP
before running it. KVM uses the current RIP as the NextRIP in vmcb02 to
emulate a CPU without NRIPS.
However, after L2 runs the first time, NextRIP will be updated by the CPU
and/or KVM, and the current RIP is no longer the correct value to use in
vmcb02. Hence, after save/restore, use the current RIP if and only if a
nested run is pending, otherwise use NextRIP. Give soft_int_next_rip the
same treatment, as it's the same logic, just for a narrower use case.
[sean: give soft_int_next_rip the same treatment] |
| In the Linux kernel, the following vulnerability has been resolved:
drm: renesas: rz-du: mipi_dsi: fix kernel panic when rebooting for some panels
Since commit 56de5e305d4b ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L")
we may get the following kernel panic, for some panels, when rebooting:
systemd-shutdown[1]: Rebooting.
Call trace:
...
do_serror+0x28/0x68
el1h_64_error_handler+0x34/0x50
el1h_64_error+0x6c/0x70
rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P)
mipi_dsi_device_transfer+0x44/0x58
mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4
ili9881c_unprepare+0x38/0x88
drm_panel_unprepare+0xbc/0x108
This happens for panels that need to send MIPI-DSI commands in their
unprepare() callback. Since the MIPI-DSI interface is stopped at that
point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic.
Fix by moving rzg2l_mipi_dsi_stop() to new callback function
rzg2l_mipi_dsi_atomic_post_disable().
With this change we now have the correct power-down/stop sequence:
systemd-shutdown[1]: Rebooting.
rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry
ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry
rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry
reboot: Restarting system |
| Renovate before 44.61.3 contains a protection mechanism bypass vulnerability that allows minimumReleaseAge checks to be skipped when a user requests a PR rebase via the rebase/retry checkbox. Attackers who publish a malicious dependency version can have it pushed into the PR and run in CI before the required release age elapses. |
| FileRise is a self-hosted web-based file manager with multi-file upload, editing, and batch operations. Prior to 3.23.0, FileRise stores failed TOTP verification attempts in $_SESSION. An attacker who already possesses a target account's valid primary credential can restart the login workflow in a new session and restore the second-factor attempt allowance, permitting continued online TOTP guessing beyond the intended five-attempt limit. The pending-login TOTP handlers did not share a durable account-wide limit. This issue is fixed in version 3.23.0. |
| Improper authentication in PgBouncer 1.17.0 through 1.26.0 allows a remote attacker who knows the password of a user listed in auth_file to log in as any other user that authenticates using SCRAM, including PgBouncer admin users and backend superusers. A second StartupMessage sent during SCRAM authentication against a non-existent database is not rejected and switches the user being logged in as, while the SCRAM exchange is still verified against the keys of the first user. |
| Improper enforcement of behavioral workflow in Windows DNS allows an unauthorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Prevent tail call between progs attached to different hooks
bpf progs can be attached to kernel functions, and the attached functions
can take different parameters or return different return values. If
prog attached to one kernel function tail calls prog attached to another
kernel function, the ctx access or return value verification could be
bypassed.
For example, if prog1 is attached to func1 which takes only 1 parameter
and prog2 is attached to func2 which takes two parameters. Since verifier
assumes the bpf ctx passed to prog2 is constructed based on func2's
prototype, verifier allows prog2 to access the second parameter from
the bpf ctx passed to it. The problem is that verifier does not prevent
prog1 from passing its bpf ctx to prog2 via tail call. In this case,
the bpf ctx passed to prog2 is constructed from func1 instead of func2,
that is, the assumption for ctx access verification is bypassed.
Another example, if BPF LSM prog1 is attached to hook file_alloc_security,
and BPF LSM prog2 is attached to hook bpf_lsm_audit_rule_known. Verifier
knows the return value rules for these two hooks, e.g. it is legal for
bpf_lsm_audit_rule_known to return positive number 1, and it is illegal
for file_alloc_security to return positive number. So verifier allows
prog2 to return positive number 1, but does not allow prog1 to return
positive number. The problem is that verifier does not prevent prog1
from calling prog2 via tail call. In this case, prog2's return value 1
will be used as the return value for prog1's hook file_alloc_security.
That is, the return value rule is bypassed.
This patch adds restriction for tail call to prevent such bypasses. |
| A user who can open a fork pull request can place workflow content with a shared run-level concurrency group into a Gitea Actions run that is awaiting approval. When a later run in that group cancels the blocked job, the run becomes terminal while still marked as needing approval. If a maintainer later approves the run, Gitea passed the already-cancelled job back through concurrency preparation, set it to waiting, and made it claimable by a matching runner, executing fork-controlled workflow code. Exploitation requires the maintainer's later approval action, Actions to be enabled, and a runner that accepts the repository's jobs. |
| A vulnerability was identified in deepseek-ai deepseek-harness up to 0.1.1-rc.2. This affects the function agent of the component dsh-workflow-worker-thread. The manipulation leads to enforcement of behavioral workflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 could allow a remote authenticated attacker to bypass additional authentication workflow steps. |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: Prevent queuing new commands if xhci is inaccessible
Refuse to queue a new command on the command ring if xHC is marked
inaccessible with the HCD_FLAG_HW_ACCESSIBLE.
HCD_FLAG_HW_ACCESSIBLE is set and cleared in suspend and resume.
Also print a warning if xhci is being suspended with commands
still pending on the command ring. |
| Inappropriate implementation in PlatformIntegration in Google Chrome on on Windows prior to 154.0.8037.57 allowed a remote attacker leveraging social engineering to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Low) |
| Russh is a Rust SSH client and server library. Prior to 0.63.1, client_read_authenticated in russh/src/client/encrypted.rs forwards CHANNEL_DATA, CHANNEL_EXTENDED_DATA, CHANNEL_EOF, CHANNEL_CLOSE, CHANNEL_OPEN_FAILURE, CHANNEL_SUCCESS, CHANNEL_FAILURE, and CHANNEL_REQUEST subtypes exit-status, exit-signal, and xon-xoff to public client::Handler callbacks without confirming that the ChannelId belongs to a channel the client opened and established. A malicious SSH server can send lifecycle events for predicted, unopened, unconfirmed, or released channel identifiers, causing application panics or corrupting command completion and exit-code tracking. This issue is fixed in version 0.63.1. |
| Inappropriate implementation in NFC in Google Chrome prior to 154.0.8037.57 allowed a remote attacker to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in XML in Google Chrome prior to 154.0.8037.57 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| NVIDIA Infrastructure Controller for Linux contains a vulnerability where an attacker could cause improper enforcement of a behavioral workflow. A successful exploit of this vulnerability might lead to data tampering, denial of service, and information disclosure. |
| HomeBox is a home inventory and organization system. Prior to 0.26.0, POST /v1/groups/members invokes HandleGroupMemberAdd and GroupService.AddMember using a caller-supplied userID without requiring an owner role, an invitation token, target-user consent, or target-user notification. Any authenticated user can force another account into the caller's group, disclose the target user's email address and name through the resulting member list, and create the membership prerequisite used by a separate cross-group inventory-wipe vulnerability. This issue is fixed in version 0.26.0. |
| RouterOS SSH enters the connection protocol after a client-requested rekey even though user authentication was never attempted, allowing an unauthenticated client to open a session channel and send an exec request. On affected builds the server dispatches the command, enabling unauthenticated creation, overwrite, and reconstruction of files in the RouterOS managed file namespace, including support files containing configuration and diagnostic data.This issue was fixed in versions: 6.49.21 (Long-term), 7.23.4 (Long-term) and 7.24.2 (Stable) |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.20, the native marketplace function core/kapp/market/market.go Buy does not check IsClaimed before accepting a bid. A seller can use the Claim seller-accept branch to settle a resting-bid auction while leaving the claimed order loadable with a future EndTime and stale CurrentBid and CurrentBidder values. A later bidder can submit a higher bid, be debited, and cause the previous bidder to receive a refund even though the NFT has already been delivered. Because Claim and CancelOrder reject the later bidder when IsClaimed is true, the later bidder cannot obtain the NFT or recover the funds. This issue is fixed in version 1.7.20. |
